Benefit enrollment form...
Hi Experts,
I am working on the Benefits Enrollment Form (SPRO-> Personnel Management-> Benefits-> Flexible Administration-> Form setup->).
I am using Office Integration of word templates to set up the forms. Could someone guide me how do I populate the fields on it after I exported the template?
Also I am getting the below message when I am opening the form. Any idea what is the error?
"The macros in this project are disabled. Please refer to the online help or documentation of the host application to determine how to enable the macros."
Best Regards
Manas
Solved myself.
Similar Messages
-
Can anyone direct me on how to change the text the Benefit Enrollment form?
Hi Ken,
You would have to copy the standard form HR_BEN_ENRO from 000 client to your customizing client and change description as desired. Iu2019d consult with the relevant resource on this.
Donnie -
PROBLEM WITH HR BENEFIT ENROLLMENT FORM ( TCODE: HRBEN0001)
problem describtion: i have eight different employee groups, but i am able to print the benefits information only for some employee groups. Can anyone help me out with this issue.............
with Regards,
Pagadiplease be specific, how come we know what is the problem you are facing.There could be lot of reasons, for you not getting the print. eloborate.
--Ragu -
Benefit enrollment confirmation form
Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and whats the transaction.
Thank you very much.
saploverHi.
How solve this issue=
Kind regards -
Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and what's the transaction (or steps to run from ECC 6.0)
Thank you very much for all your assistance.
With very best wishes.
saploverHi.
How solve this issue=
Kind regards -
Benefit confirmation form on ESS
Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and what's the transaction.
Thank you very much for all your assistance.
With very best wishes.
saploverHi.
How solve this issue=
Kind regards -
How to setup benefit confirmation form in ESS?
Hello experts,
Would you please share your note on how to setup the benefit enrollment and confirmation forms from ESS side.
We have the form and the relevant configuration in view V_T74HL. Not sure how to do from ESS side. Does the ESS
calls the same form or we have to create a new? Moreover, what happens when we make changes in the forms on SAP
side, do we have to duplicate the changes on ESS side as well.
Please advise.
Thank you.
saplover20Ok....follow below...document...you will get all your answers.....if its overview page for Benefits and Payments....
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d?quicklink=index&overridelayout=true -
who will do benefit enrollment? third party or In sap itself? who is the third party vendor?
Hi Rakesh,
Who should handle benefit enrollement depends on client requirement.
In SAP Benefit Administration module we do have enrollment function.
Here is the document
http://help.sap.com/saphelp_46c/helpdata/en/7e/8a5f51545711d1891c0000e8322f96/content.htm
Client may chose to only store benefit related information and take help of other third party vendor and use interfaces to communicate it to SAP for payroll and master data maintenance.
Aon Hewitt is one of the well known vendors. Might be more not sure of all names.
Hope it answers your question.
Regards,
Jignya -
Enrollment Form Not Visible for Adjustment Reasons
Hi Experts,
I am having an issue with the Benefits enrollment not being displayed in the ESS portals. We are using an adjustment reason based open enrollment . The link is visible if give the event name as BENP_EVENT = OPEN which points to the form with standard open enrollment form listing all plans but we want to use 'OPN' (custom reason) instead of 'OPEN'. If i change the event to BEN_EVENT= OPN, it is displaying the link but not unable to read the employee and throwing an error saying, "infotype IT0171 doesnot exist for 00000'. Listed below is my configuration.Your help is much appreciated.
Adjustment Reason:
Form Setup:
Launchpad Link:
Launchpad Config:
Ess Page:
Thanks,
VishnuHi Shankar,
Thanks!! for the reply. The application is in active mode only. The system is only taking the event name(BENP_EVENT = OPEN). I have to create another adjustment reason with 'OPEN' name just for form purpose and keeping my 'OPN' as is for my enrollment purpose. The problem is with 'OPEN' it lists out all the plans , even the ones that we don't want to show.
Thanks,
Vishnu -
Benefit Enrollment Callable Object
Hi Experts,
I am trying to implement Benefits Enrollment through GP process under "My First Days". I have copied the SAP delivered action for benefit enrollment as per note 968360.
The action has Input parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
I also have a callable object:
Object Definition:
Web Dynpro Application: BenefitsApplication
Package: com.sap.xss.hr.ben
Development Component: com.sap.pcuigp.xssfpm.wd.FPMComponent.
Parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
For some reason, the above configuration is working on portal. It is throwing an error:
No correct adjustment reason specified
How to get rid of the error. It is very clear that adjustment reason should be passed from GP Design time. But I can not figure out what is missing.few questions
when you add the service that you have mentioned in the service area for an employee I want you to answer following
1. check the IT 378 entry and reply with how many reasons are configured for current period
2. in portal for the same employee how many services are seen
3. What is the link that you click and you get message "no enrollment reasons found"
I had a similar issue and this was because we enable a wrong service.
The correct service if enabled will show all the reasons configured for current period in infotype 378. -
Hi,
I have a quick question (or maybe) two about sending enrollment form. Do I have to wait for enrollment form to be accepted, before submitting application ? I've read already in some other post that I do not have to, is that right ? As far as I understand, the enrollment form will be needed only in case, when total value of all sold copies exceeds 100$, right ? And finally, what about Intel AppUp, does it work the same way as for Marketplace ?
Thanks for any clarification and answers to these questions!
best regards
MateuszHi Mateusz,
Enrollment form is not required for free application. If you are submitting a paid application, you can submit your enrollment form after publishing the application. You need to ensure that you have submitted the enrollment form in order to get paid for your application that you distribute through AIR Marketplace or through your own website.
Both Intel's and AIR Marketplace's payment policies are covered in the InMarket documentation: http://learn.adobe.com/wiki/display/InMarket/07+Settlement+and+Payment
I would highly recommend you to go through it as it covers detailed answers to all your questions.
Let me know if you have any further questions. -
Config steps of Life plan for Domestic partner to appear in enrollment form
Hi All,
When we are trying to configure 'Insurance plan' for 'Domestic partner' , system does not display this option in the enrollment form. Where as the same kind of configuration is working perfectly for the dependant 'Spouse'. Please throw light on what all are the required config steps to pop up the 'Insurance plan for domestic partner' in enrollment form.
Here are some of config steps maintained.
- All basic settings
- Option 'Domestic partner' in Coverage variants & Cost variants
- Age as parameter grouping
- Dependant eligibility for subtype 'Domestic partner'.
Please let me know what config steps are required to give the domestic partner option..
Thanks a ton in advance
SarvaniI just unchecked "Allow Multiple Selection" and the form worked normally. Is there a workaround so that I can save multiple values for one List Box object?
-
ESS BP-50.4 Benefit Enrollment - Dependant Selections
Hi - I have installed the ESS BP 50.4 and for benefit enrollment all of the screens that all you to select eligible dependants - the check box shows at the top of the screen when the dependant name shows in a table at the bottom of the screen....how/where do I correct this?
Thanks - JanetDid you ever resolve this issue? I am experiencing the same issue.
-
Pop up enrollment form after teh action run
Hi experts,
I have a situation where I want the Enrollment thing (HRBEN0001) to come up after I run an action. The action runs fine i.e. it goes through all the infotypes but it doesn't come up with enrollment part like the one it comes up with new hire action. HOw do I bring that up.
The infotypes sequence I have is: 0001. 0008 0171 0378
I want HRBEN001 to come up right after 0378. Please guide me how it can be done.
Thanks,
RashmiHi Rashmi,
I am having a similar situation to pop-up BN enrollment form after filling infotype 0378. Can you help me on how to achieve the same.
Thanks in advance
Lakshmi -
CUSTOMIZED BENEFITS ENROLLMENT FORM NOT PRINTING PROPERLY
Hi there,
I customized the benefits enrollment form HR_BEN_ENRO and I am trying to print the form in HRBEN00CEWB but only the first page is printing and not all the plans are showing up even if th employee is enrolled in more than one plan.I dont know on what basis its getting the information and showing up.When I do a print preview of the form in SE71 the form shows up all the pages but when i goto transaction HRBEN00CEWB its not printing all the pages.Its just printing the first page even in print preview.i didnt modify the standard program.I modified the form and assignmend to the print program in the config.Any solutions??Please help
Karthik.May be because the Main window is placed halfway in the second and third page. If you are using a single page may be you have restricted other windows by specifying conditions "only on first page".
To rectify this you can copy the first page into second page and altering the position of the main window. Now assign the next page of first page as second and next page of second page as second page itself.
Revert back if you have doubts.
Regards
Karthik D
Maybe you are looking for
-
Please help, setting up multiple ios devices
Here is what I have. Iphone 5 Iphone 5 Iphone 4 Ipad 2 Ipad 3 I would like to set up iCloud so that the devices can be backed up without the use of a computer. I would like 1 iphone 5 and Ipad 2 to share photos/data/messages 1 iphone 5 and Ipad 3 to
-
How modify material group in agreement scheduling
Hello, I want to modify material group in agreement scheduling, I try with Bapi 'BAPI_SAG_CHANGE' but it's not possible. Have you a solution ?? Thanks for advance for your contribution. Regards. JL
-
Can anybody explain me how to see the print preview of production Order, Goods receipt (for MB31 transaction), Confirmation slip in Production Planning?
-
How is my connection for gaming?
Hi, I have 20MB broadband (fastest available from my exchange) and mainly use it for heavy online gaming and web browsing. My connection in games is usually good on UK and EU servers with anywhere from 1 - 100ms latency but goes anywhere from 100-500
-
JSP Fragments (JSP 1.x) or JSP Segments (JSP 2.0)
I currently build a web project from a WAR file which includes JSP fragments (<root-context>/includes/*.jsp). When I compile the project JDeveloper 9.0.3.1035 will try and compile the fragments which will fail. Sun recommends an alternate extension o