Benefit Enrollment (HRBEN0001) Showing Annual instead of PayPeriod Costs

HCM: In the Benefits Enrollment screen, when selecting a particular benefit plan, the Employee and Employer costs for that plan are supposed to display the cost amount defined in the cost rule for that plan and adjusted to the employee's pay period. For most of our plans, this is indeed what is happening. However, for our salaried US employees, it is displaying the annual cost of the plans instead of the pay period cost. This does not occur for our hourly-paid US employees nor does it occur for our salaried or hourly-paid Canadian employees. If we go into PA30 to adjust the benefit plan, we can change the period from annual to bi-weekly and save it but when we return to that plan, it has again reverted to annual. It occurs only for Insurance plans and not for Health, Savings, or any other plans. As well, it does not occur for all the Insurance plans but only for some of them. (We are running ECC 6 with support pack 18.) Any ideas/suggestions on how to correct this?
Edited by: Ken Rodych on Sep 8, 2010 9:55 PM

The problem appears to be the deduction model (thanks Sarah). I have to do more testing to confirm this and will let you know whether it resolves it. (I will also award the'Forum Points' at that time, depending on the results of my testing.)
Edited by: Ken Rodych on Sep 9, 2010 4:34 PM

Similar Messages

Benefit - Enrollment to delete a benefit plan

Hi,
The requirement is to delete a benefit plan (e.g. DENT) from enrollment screen (HRBEN0001):
a) Is to delete a benefit plan via "Define Benefit Programs" the best way?
a) Currently, there are employees already enrolled with benefit plan DENT and have payroll run with it. Is there any impact that need to be considered?
Thanks
Nikki
Edited by: Nikki_99 on Aug 5, 2010 2:39 PM

I think the requirement probably is to exclude this plan from showing up in 'HRBEN0001' for specific benefit adjustment reasons.
If this is the case, you can remove this through V_74HB_A (for health plan as it's Dental plan). Note, this only exclude the plan from showing up in benefit enrollment; it doesn't prevent user from actually adding this in IT0168 through PA30.
You really don't want to physically remove an existing benefit plan that's either currently or previously used as this would cause inconsistency.
Rgds.

Benefit Enrollment.

in benefit re-enrollment HRBEN0001 for employee setup with car allowance of wage type 1006 getting an error u201CError occurred when calculatingu201D . Kindly help.

Hi Kumarpal, we are in the process benefit re-enrollment, using HRBEN0001. we have few employees setup with
info-type 0014 (re-occuring payments used for car allowacne). if any employee has this info-type and has LTDI plan for
future date (begda 2009/01/01). 'Error occcured in calculating
salary' message appears in the error list. if I remove this info-type 0014, then there is no issue. Thank you so much
for your help.
Regards, Tom.

Benefit Enrollment Callable Object

Hi Experts,
I am trying to implement Benefits Enrollment through GP process under "My First Days". I have copied the SAP delivered action for benefit enrollment as per note 968360.
The action has Input parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
I also have a callable object:
Object Definition:
Web Dynpro Application: BenefitsApplication
Package: com.sap.xss.hr.ben
Development Component: com.sap.pcuigp.xssfpm.wd.FPMComponent.
Parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
For some reason, the above configuration is working on portal. It is throwing an error:
No correct adjustment reason specified
How to get rid of the error. It is very clear that adjustment reason should be passed from GP Design time. But I can not figure out what is missing.

few questions
when you add the service that you have mentioned in the service area for an employee I want you to answer following
1. check the IT 378 entry and reply with how many reasons are configured for current period
2. in portal for the same employee how many services are seen
3. What is the link that you click and you get message "no enrollment reasons found"
I had a similar issue and this was because we enable a wrong service.
The correct service if enabled will show all the reasons configured for current period in infotype 378.

ESS BP-50.4 Benefit Enrollment - Dependant Selections

Hi - I have installed the ESS BP 50.4 and for benefit enrollment all of the screens that all you to select eligible dependants - the check box shows at the top of the screen when the dependant name shows in a table at the bottom of the screen....how/where do I correct this?
Thanks - Janet

Did you ever resolve this issue? I am experiencing the same issue.

Discoverer report showing null instead blank

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

hi,
I am running report from discoverer and it is showing null instead blank, do I need to check some thing in pref.txt file in oracle 9i
regards
kumar

Goods receipt subtotal is showing zero instead sum of quantity..!

Hi Guys,
1. Goods movement subtotal showing 0 instead of the total of the quantity.
The check throwing the following error message.
Update control of movement type is incorrect (entry 122 X X)
Message no. M7226
2. Purchase order data tab not showing item details for variance items but showing the message
"This item has not been ordered." But the PO items are ordered and present in the PO.
Please find the screen shots.
Thanks
Sam

Hi Sam,
Kindly Check table T156SC entries there is a entry missing in the table.
And if required so kindly Maintain the missing entries in table.
If entries of movement type 101 are prefect then
Goto Transaction -- SE37 ,
Function module -- MB_CONTROL_MOVETYPE_GET_SINGLE
Kindly do Set a break point to select statement which is failing at the table above at both the systems.You should be able to crack the error.
Hope this will help you to solve the issue.
And if not Kindly let us know.
Thanks & Regards
Ritesh Kumar

Discoverer 10.1.2.55.26 Viewer Shows NULL instead of Blank

Hello All,
we recently installed Discoverer 10.1.2.55.26 and applied cumulative patches(CM4). we migrated 9.04 version reports to Discoverer 10g(10.1.2.55.26).
On all the Reports, we see NULL instead of Blank spaces in the data in the viewer. How can we change all of the reports to show blank space instead of NULL.
Please share your experience and thoughts on this Issue
Thank you
Chandu Ambati

Thank you Tamir,
Before i try on the big bang approach. I tried changing the worksheet options for one of the worksheet that shows NULL.
I changed from NULL to blank space and saved the workbook.
we use Oracle Portal to show these workbooks as Portal Views. Portal View was showing NULL before the change, and after changing the worksheet options and saving it, i refreshed the portal view and it started showing Blank instead of NULL. Works fine for that day.
The next Day again it started showing NULL.
Do u think are we missing any step?
Thanks again for your help.
Chandu Ambati

I accidentally ran iPhoto Library Upgrader on my Picture folder and now I have to right click on it to "show contents" instead of looking at it in Finder. Help!

Help! I have 2 problems related to iPhoto:
1: I accidentally ran iPhoto Library Upgrader on my Picture folder and now I have to right click on it to "show contents" instead of double clicking on it and looking at it in Finder. I cannot figure out how to fix my Pictures Folder so that I can click on it and view it in Finder, when I double click on it Terminal opens up with this message "Pictures - Bash 80x24" and
Last login: Mon Nov 3 14:00:05 on ttys000
Christinas-MacBook-Pro:Pictures christinagrierson$
It will not let me replace or delete the folder... I got to my files and backed them up, but trying to avoid reinstalling my OS.
2: When I try to Upgrade my Library.iPhoto file so I can open it in iPhoto it says I need to finish by opening in iPhoto, but then when I do, it tells me it first needs to be upgraded in the iPhoto Library Upgrader... Vicious circle. Please, help! Just trying to recover about 3 years worth of photos...

Hi! Thanks for responding!
I have iPhoto 9.5.1, I am on OS X Version 10.9.5 on a MacBook Pro with 2.66 GHz
My current "iPhoto Library" file is OK (I can open it with iPhoto), however I cannot access the old one from iPhoto 6 titled Library.iPhoto
I tried right clicking and choosing the application, it did not work.
"exactly how did you "I got to my files and backed them up"" - I showed the contents of my Pictures folder, and it opened up the folders in Finder and I copied them to an external hard drive. In my Picture folder I have several folders of Photos plus the iPhoto Library files (old & current)
I do have old back ups, but they are from April, and I recently imported 5 months of photos from my iPhone, so the iPhoto Library I copied after showing contents is the one I need.

Whenever I try to download a new application, my parent's apple id shows up instead of mine which is on my computer. My mom doesn't want to put down her credit card information because I use gift cards. How do I change the ID on my ipod to my apple ID?

Whenever I try to download a new application, my parent's apple id shows up instead of mine which is on my computer. My mom doesn't want to put down her credit card information because I use gift cards. How do I change the ID on my ipod to my apple ID?

thank you so much lllaass. im an idiot for not finding that out.

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

Hi Rakesh,
Who should handle benefit enrollement depends on client requirement.
In SAP Benefit Administration module we do have enrollment function.
Here is the document
http://help.sap.com/saphelp_46c/helpdata/en/7e/8a5f51545711d1891c0000e8322f96/content.htm
Client may chose to only store benefit related information and take help of other third party vendor and use interfaces to communicate it to SAP for payroll and master data maintenance.
Aon Hewitt is one of the well known vendors. Might be more not sure of all names.
Hope it answers your question.
Regards,
Jignya

Show key instead of text in ME51N for PR document type

Hi, did anyone know how to show key instead of text in ME51N for PR document type? How can I remain the setting after shut down the PC?
Thanks.

Can you give more info about your need as it is not clear which text you're referring to.
Regards,
Vivek

Why did contacts suddenly show numbers instead of names on calls and messages?

My calls and messages stopped showing names and started showing numbers instead? Why?

On verizon dial *228 to setup.

Benefit Enrollment (HRBEN0001) Showing Annual instead of PayPeriod Costs

Similar Messages

Maybe you are looking for