Benefit Error "No Benefit Plans found for Program Grouping"

Hi Experts,
While running Report for Employee Eligibility RPLBEN01 it through an Error Message
"No Benefit Plans found for Program Grouping 1st/2nd"
I have configured 1st and 2nd Program Grouping and maintained respective features also.
Can any body guide me to clear this issue.
Thanks in Advance.
vnk

check this view V_T5UBU whether you have created the record for you plan against your first program grouping and second program grping

Similar Messages

Error-No Warehouse FC found for plant 1010/valuationh classs 3001

Hi,
Funds Management is active in my company code.Budgeting is on cost center level.
My question is in many PO's and PR's we dont input account assignment as cost center because we dont require to put in it so now while creating PR for a BOM material im getting error "No warehouse FC found for plant 1010/valuation class 3001"
When i select account assignment as Cost center it is working but i dont want to select that assignment as per requirement.
And when i select Account assignment as UN (unknown that is also working fine.
What is the possible solution to get rid iof this error.
Thanks
Deepa

consider it as a high priority

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Error - No update server found for context

Hi
I'm trying to write a BSP page that sends E-mail via sap connect.
I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work.
When I try to send an E-mail, the program terminates with
500 SAP Internal Server Error
Error message: No update server found for context :b: ( type of termination: ABORT_MESSAGE_STATE )
I can in my system send e-mail from a standard program using the function Z_E_KEG_SEND_SIMPLE_EMAIL that I found in a weblog here on sdn
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I have not been able to find any info on this error, just a hint that I need to configure some RFC destination ?
Any hints on how to solve this are very much appreciated

I found nearly that exact same error message in an old MM OSS note - 333941. The error message there was in ME47:Termntn A:No update server found for context:X. Now that was context:X and not context:b like in your error, but perhaps the solution then will lead you to some clues. The following were the code changes of that OSS note:
Delete Block
    SET LOCALE LANGUAGE EKKO-SPRAS.            "CF 4.5A TODO
    XEINA-SORTL = XEKPO-TXZ01.
Insert Block
    DATA: S_LANGU LIKE SY-LANGU.
    S_LANGU = SY-LANGU.
    SET LOCALE LANGUAGE EKKO-SPRAS.                         "149717
    TRANSLATE XEINA-SORTL TO UPPER CASE.                    "149717
    SET LOCALE LANGUAGE S_LANGU.
On one hand this correction might be telling us that this error has something to do with language, or more specifically the act of not returning the local language to the logon language. On the other hand, maybe it is just leading us on a wild goose chase.
Message was edited by: Thomas Jung

ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

Error 'No tax code found for difference' in Posting Vendor Invoice IDOC

Hi All,
I am getting error message 'No tax code found for difference' while posting Vendor Invoice IDOC into SAP. IDOC type is INVOIC02. There is no difference in PO price, Invoice price and even Standard price. then why this error message? Other Vendor EDI settings are done ( OBCA, OBCD, OBCE etc). Is there any thing specific to be done in the config for this error?
IDOC has PO as reference document.
I looked into several threads in SDN forum but could not find proper solution
Can any ine help me with this issue?
Thanks in advance
Hari

Hi
You might be missing the tax code for uploding through IDOC
so you can use the t.code we02 and give the doc and find the error
go to the WE19 to edit the tax code
and USE the t.code BD87 to select the doc and process it
thanks
Madhu

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
No object type found for this message; check the activation of the corresponding process
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

ALE settings error "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

Error: No Logon Data found for Lotus Notes System

Hi,
I have created a lotus notes sytem and have configured the transport also.
But even then i am not able to create appointment under collaboration.
I get the error msg :
"No logon data found for the system 'system name' ".
And when i tried to change the User Mapping , it gives the error msg,
" Error in accessing user mapping data for selected system"
Pls help. Thanks in advance.

Hi all,
Here are a few solutions which may help you solve your problem
1) Access the lotus system with its fully qualified hostname in the system credentials and in the Lotus transport as well.(Ping from portal side and Domino side to each other to check the connectivity as well as the heartbeat check i.e.Launch http://<hostname>:<port>/<servletDirectory>/CalendarServlet in the browser to check the connectivity)
2) In the servlets.properties file,add the following(marked in bold)
servlet.CalendarServlet.initArgs=saveperiod=50,width=7,AttachmentFolder= D:
temp,useEmail=true,debug=true,logResponse=true
This will help you find on the Lotus console what the possible error could be.
3) Run the command 'load http' (coz the http protocol might not have been loaded) on the lotus console and restart the lous server.
If this is the case then make the following entry in the notes.ini file.
Against the list of ServerTasks add HTTP
Regards,
Prathamesh

CS4 internal error 11 Media not found, for menus?

Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal Burner

Shouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio

Lync Topology fails with error (Mutliple Entries were found for type "ms_RTC-SIP-EdgeProxy")

Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JH

Hi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error - No defining declaration found for implementing declaration of partial method

Hi,
I am quite new to c# and using lightswitch to create a webform. However, I have to write a code as per the webform logic and requirement and now getting error on this part -
partial
voidgridDeleteSelected_Execute(StringID)
The error is - No defining declaration found for implementing declaration of partial
method
Could someone please tell how this error can be resolved ? Please find the code attached below.
Thanks.
using System;
using System.Linq;
using System.IO;
using System.IO.IsolatedStorage;
using System.Collections.Generic;
using Microsoft.LightSwitch;
using Microsoft.LightSwitch.Framework.Client;
using Microsoft.LightSwitch.Presentation;
using Microsoft.LightSwitch.Presentation.Extensions;
namespace LightSwitchApplication
public partial class EditableServicesGrid
partial void gridDeleteSelected_CanExecute(ref bool result)
partial void gridDeleteSelected_Execute(String ID)
if (!string.IsNullOrEmpty(ID))
string sqldelete = "Update services set DELETED_FLG = 'Y' WHERE ID IN ( " + ID + ")";

partial
voidgridDeleteSelected_Execute(StringID)
The error is - No defining declaration found for implementing declaration of partial
method
Could someone please tell how this error can be resolved ? Please find the code attached below.
Could you explanation what your requirement is? detailed information is necessary.

I get error "no content was found for the specified identifier of 10006715353

I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353

When you export your completed book , you wil see the saved file as .... xxxxxxxx.ibooks
A Preview is a sample of your book to allow potential buyer to check the content.
You can either duplicate your book, add PREVIEW to the file name ie PREVIEWmybook.iba.
This must have at least 15 pages. OR when you upload your book, you have an option to allow iTunesProducer to take a chapter as a preview and you can also select which chapter you want as a sample.
Tiffs are not suitable jpgs are.
Your original post says....I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353
If you do not know what an ibooks file or preview is... what were you trying to upload?
"Publishing to iBooks Author" You create books in iBA to "publish" to the iBook store via iTunesProducer.
Use this link for more information: http://support.apple.com/kb/PH12101 or this is the full list for you to study: http://www.apple.com/support/mac-apps/ibooksauthor/

Error: No standard agreement found for....

Hello,
I've been fighting during hours with this error. I'm using PI 7.1 ehp 1 in a SOAP to RFC scenario and I can't find why this is happening.
In the scenario everything it's ok. If I go to the receiver determination I can see the interface determination, receiver agreement and receiver communication channel but when I test the scenario PI isn't capable to determine the receiver interface (the system determines that the receiver interface is the sender interface)... It doesn't matter if I use a SOAP client or I use the RWB tool to test it directly to the IE.
I've refreshed all the caches, and I created allt the scenario again but the problem is still there...
Can it be a problem with this last PI version?

Thank you Rajesh,
I've tested the configuration in ID and it's much more clear there. The problem is that the system didn't found any interface determination... and then it uses the sender interface as receiver interface... But it has no sense because if I go to the receiver determination object I can see how PI detects the interface determination for that receiver...
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service "RECEIVER" </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) "RECEIVER" "OUT INTERFACE" </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: "IN INTERFACE" </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>

Error:No Suitable Driver found for sybase

Jdev 11.1.1.4, ADF BC and ADF Faces
Problem:
Created ADF BC module using Sybase Database connection. While running the module its giving
“No Suitable Driver found”.
Process we have followed:
1) Created a Sybase Database connection in Resource palate. (jar added in classpath jconn2.jar & jTDS2.jar).
Note: Sybase connection is successful :)
2) Use this connection in New ADFBC Appmodule.
3) In Implementation class we are trying to call a Sybase procedure.
4) Then Running the Appmodule using “Run” button.
Approach we have tried after getting the error:
1) Copy jconn2.jar & jTDS2.jar in BC4j/jlib – It ‘s not working.
Any suggestion will be helpful. Thanks in advance.
~Abhijit

You have to configure the SQL flavor and Sybase JDBC driver class in the AM configuration properties:
<tt>jbo.SQLBuilder=SQL92
jbo.sql92.JdbcDriverClass=com.sybase.jdbc2.jdbc.SybDriver</tt>
(The JDBC driver class may be <tt>com.sybase.jdbc3.jdbc.SybDriver</tt> depending on your Sybase ASE version).
You may have to set the AM's property <tt>jbo.sql92.LockTrailer</tt> as well.
Alternatively, you may set the SQL flavor, JDBC driver class and the lock trailer in adf-config.xml. If you are setting these values in adf-config.xml, then you may have to choose "Custom" SQL flavor.
Dimitar

Benefit Error "No Benefit Plans found for Program Grouping"

Similar Messages

Maybe you are looking for