Benefit from high speed arrival..........or not ?

Superfast Cymru, high speed internet, is coming to our exchange, Newport Pembrokeshire. We are 8 miles from the exchange and currently are lucky to get 1 Meg.
Will our speed go up "proportionately" with the arrival of high speed, assuming that BT will only cable to a box on the outskirts of Newport ??
Would be very happy with 3-4 Meg !
NB - please no feedback on how lucky we are to get 1meg currently given our location (we know).

Hi Gorillaman,
Was their a cabient number on the http://dslchecker.bt.com/adsl database for your number?
EG Exchange xxxxxx is served by Cabinet n
All three cabinets on the exchange Newport Dyfed exchange are planned to get a FTTC DSLAM cabinet, however it all depends how far you are away from the cabinet that cabinet which will determin if you can get FTTC fibre broadband and what potenitial speed.
If you can say what cabinet you are on, the community may know where it is and from that you can roughtly estimate what to expect in terms of speed (bearing in mide the your line maybe longer, and line quality will also have a contributing factor)
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Similar Messages

Hourly disconnects from High Speed Internet Enhanced

Hello all, I have verizon high speed internet enhanced and have not had any problems at all with the internet since I had a verizon tech. install it. However, since 4 days ago my actiontec GT740 WGB router has been constantly disconnecting from the internet on an hourly basis. It happens up to 5 times an hour, with the disconnectiong lasting about 10-15 seconds. Now, this may not provide much of a problem, but I bought the internet basicly for my xbox 360. I cannot complete full games online versus other players because of these interuptions 'causes me to lose connection and ultimately lose the game.
Verizon HSI Enhanced download - 10.1mbps
Verizon HSI Enhanced upload - 0.8mbps
I have only had my verizon for a few weeks now, but up until now it has been working extremely well. I'm a bit disappointed now, because I have read and heard of this problem, and was hoping not to encounter it.

Hello,
When you notice the disconnect, are the router lights turned off? Outside of playing games on the XBOX does your computer lose a connection as well?
Please send me a private message if you still need assistance.
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Upgrade to High Speed Internet Enhanced : Not working

I recently upgraded my internet connection to High Speed Internet Enhanced (7.1 Mbps to 15 Mbps) from my old plan which had a speed of 1Mbps to 3.1Mbps. The order status indicates that the service has been activated. But still I am experiencing only the old speed (approx 2.5 Mbps only). Can anyone help?

Could you post your modem's Transceiver Statistics for us? If you don't know how to get them, finding your modem make and model and posting it up will help us help you get them.
One key thing to lay out on the table, if it isn't a stats issue it's possible 3Mbps/768kbps is your max speed due to your line coming from a Remote Terminal or DSLAM rather than the CO itself. Remotes are currently capped at 3Mbps, with the exception of a few meant to act as Mini-COs due to the lack of capacity going to them, and especially due to some of them being quite old. This is something for a person with the right level of access to the network or your account to find out. I've got someone who will check and turn up the speed if possible but we need to see the stats first.
========
The first to bring me 1Gbps Fiber for $30/m wins!

High Speed broadband? Not from my WRT54G

Please help. I recently upgraded my broadband to the highest speed available in my area, downloading at 15 Mbps. With a direct line connected to my modem, I am achieving that speed. As soon as I go wireless through my WRT54G Version 6, my speed goes to 4 Mbps. I upgraded my firmware. I chatted with tech support and they had me change my MTU. Still nothing. Can someone please help? Andrew

After upgrade did you resetted the router?? If not then reset the router for few seconds ... after reset again reconfigure therotuer with different wireless network name .... change the channel from 6 to 11 ...click save settings ... Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ... Again check the download speed ... Hope it works...

Macbook Pro fan running at high speed but is not experiencing heavy usage

My computer is 3 years old and I've had no problems.
A few days ago the fan started whirring incessantly after the computer had been on for only 10 minutes or so, even when experiencing minimal usage.
This could be just a coincidence but the issue started about the same time I installed the latest security update, I'm on Yosemite.
Can anyone help?

The first thing to try is a SMC reset.https://support.apple.com/en-us/HT201295 Also check for run away apps. https://support.apple.com/en-us/HT203184 You could also make sure the back vent is not getting clogged.

Does Aperture Benefit from RAIDs???

I was just thinking about getting a RAID-5 external enclosure that would allow high-performance and the protection from a single dive failure. I would use this new drive for Final Cut Pro, Music files, and Photos (Aperture)...
So, my question here is, does Aperture significantly benefit from the speed of a RAID??? Please comment on the speed benefit that you have witnessed by going from a single (high-speed, SATA) drive to a RAID.
Thanks,
Robert

Complete Newbie wrote:
Aperture doesn't appear to me to be disk-bound. You get redundancy (and hence more reliability) from a RAID-5 system, but you won't see much increase in the speed of the app. Aperture's problem is that a single 12 Megapixel image takes ~ 100MB of RAM...
Working on a properly configured Mac Pro platform, the workflows of apps handling large quantities of images often are "disk bound." Fast drives and various RAID array configurations can be very beneficial. Optimizing each drives setup, however, is very individual and indeed a challenge.
Also RAM usage IMO is not a problem, RAM is cheap. Any new MP setup should have at least 8 GB RAM (US$450) added to it, minimum 2-GB sized DIMMs.
-Allen Wicks

What is the difference between USB bus and USB high-speed bus?

anything that i plug into the USB ports that registers in the USB high-speed bus does not show up on the desktop. i have tried different devices and none work when the system profiler show them in the high-speed bus. anything i plug into the USB that registers in USB bus works just fine. what is going on here?

jmfordham wrote:
i tried my new sony camera and also a SanDisk memory card reader. looks like both are USB 2. neither show up on the desktop. why does my computer have trouble with devices that are USB 2 and how can i fix it?
I've got a couple of SanDisk memory card readers. Nothing shows up on the desktop until a formatted card is inserted in the reader. If it's not formatted, I believe it can be formatted in Disk Utility.

How can I stop spam from someone called AT&T High Speed Internet? I do not know what the email address is.

I am receiving 100's of spam emails. They are all advertising different types of products but they all say they are from AT&T High Speed Internet. I have used the junk filter on them but it does not pick them up as junk. I have to do it manually each time. I have contacted my UVerse provider and they cannot assist because it is getting through Yahoo to Thunderbird. They say that it is a problem that I will have to have assistance from Thunderbird to resolve so that I can have this listed as junk and will not have to do this manually. I am at my wit's end. Please, please help me!

Yahoo has its own junk mail filter (Spamguard), which you should confirm is enabled:
* [https://help.yahoo.com/kb/mail/stop-spam-yahoo-mail-sln3227.html Mail Help | - SLN3227 - Stop spam in Yahoo Mail]
The significance of this is that marking messages as junk in Thunderbird probably isn't integrated with Yahoo's system, so Yahoo may not be getting trained to block them. You might need to go into Yahoo from time to time and mark accumulated junk as spam.
Separately, there are solutions for filtering spam on your computer as the mail is downloaded from Yahoo. Thunderbird has a built-in filter, as described here: [[Thunderbird and Junk / Spam Messages]]. However, if that isn't as effective you would like, there are third party products as well.

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What do I need to do?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do.
I did try to download Firefox again, but still will not work.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Changed from dial up to high speed

The area I live in finally has high speed (wireless), so I have a new ISP and broadband connection. Also Internet Exlporer was acting up so I now am using Firefox.
If I put in a new cd to download to my ipod (5th gen.) I get...unable to connect to the CDDB server. Network connection timed out. I called my ISP and all is ok. also can't buy any tunes. In frustration I've downloaded itunes again with my new user name. This page had my old user name. I've flushed the DNS settings in widows. I've spent hours yesterday trying to get this, which must be a simple thing, to work and came within an eyelash of putting my fist through the monitor!
I tried calling the help line with it's push 1 for this and 3 for that and on and on, what a joke, got nowhere.
Does anyone know it this is firefox, or something not set correctly, and how to set it, or what the heck is the problem?

Is this the error?
Disk cannot be read from or written to error syncing iPod in iTunes.

Connecting to High Speed Internet - I am not a Crook!

Ok, first of all, you're going to have to hear me out. I think technically what I'm trying to do is illegal, but in the real world I think its perfectly justified...
I have cable internet at home that I pay for and enjoy. My computer is the only computer in the house and thus the only one using the service. Right now I am house sitting with my girlfriend and have brought my computer with me, thus leaving my cable internet hookup behind at home unused. I'm connecting to the internet here with a dialup connection account that the owners of the house have and the slowness is driving me crazy.
I thought that if I brought my cable modem with me and hooked their cable into it I would be able to get access to the high speed internet - which I think I am justified in doing since I am paying for the service and it is going unused at home. The only problem is it doesn't seem to be working. The cable modem has a green light for "cable" but nothing for "data", and everytime I try to go to a website it either asks me to dial in to the dialup service or work offline.
At home I know that we have the same cable for our TV as we do for my internet because in my room where the computer normally is I have a small TV (for viewing with Premiere) that we also pay to have a cable connection into and the cable guy merely split the cable to go both into my computer and my TV.
Is there something they would normally have to switch on outside to make the cable work for the internet as well? I'm not interested in messing with that, I'm just wondering why its not working here.
Darcy

Oddly enough, I was in paying for my cable and asked (in a roundabout way) about the possibilities of hooking up at another house and what was the deal about splitting the line and getting basic cable without paying for it.
The answers I got were basically...
When you sign up for cable modem, you are renting a port, that prot can go anywhere, it's not stealing if you only use it from one place and can only get detected if it's on in two places.
When you subscribe to cable modem, the basic cable is inherent in the signal. In my case (comcast), you can opt for a package that includes basic cable and the internet service for the same price as the internet port alone. They know people split the cable and hook it up to their TV, some installers go ahead and do that as a service. If the installer runs two cables into the house, it's simply split upline somewhere, it doesn't really accomplish anything.
It was almost like talking to the limo driver in the Wayne's World movie. Too much information...

Help! data manipulation for high speed streaming to disk from multiple boards and multiple channels

I am using Labview 7.1 and have been trying to capture data from 12 channels simutaneously sampled at 2MS/s each and streaming to disk for up to a minute or more. The hardware I am using is 2 x PXI 6133 S series boards with a MXI4 link to a Pentium D 2.8 Ghz machine with 2Gb ram. I have 2 sata drives set up in a raid 0 configuration which should give me hard disk write speed faster or equal to the MXI-4 transfer speed.
I have first started off by using the example code "multi device sync - analog input- cont acquisition" which has enabled me to sync the two boards and sample at the required speed.
To stream the data to disk, I have first merged the data from each board together to save it to one file. I have tried using the storage vi's but I end up with a Daqmx read error (trying to read data that is no longer available). I have played around with the read data size to the point that I either get a insufficient memory error, or I get the "trying to read data that is no longer available" error. I have also tried using the file IO blocks with some success and have found that I have been able to stream to disk only if I configure the daqmx read block to output the data in "raw 1D I16" format and plugging it into the file-write block. In doing this, I have noticed that using multiple channels on one daqmx read task, I will get all the channels in one 1D array rather than a 2D array organized by channels. This makes it messy to read at the end of this, and I also don't want to write another vi to separate the channels, due to the high chance of getting the data mixed or messed up if I happen to change the number of channels on a board
Is there a cleaner way of streaming this data to disk and keeping the channel data separated from each other?, and/or is there a better way to capture and handle the data I need?
I have attached the vi which I have got to consistantly work streaming to disk using the raw 1D I16 format.
Thanks in advance to anyone who can help.
Attachments:
multidevicesync_analoginput_streamtodisk.vi ‏197 KB

Hi,
i can suggest following
Refer to an example VI called as "High speed data logger.VI" in conjunction with "High Speed data logger reader.vi" in Labview examples. Alhrough the logger might be in Tradiditional Daq format, it can be quite easily converted to Daq Mx format to store data in Binary (I32 format) . I have used this for many of my applications and i have found that the data retrieved does not have any "messups".
Why not keep a seperate file for each card? This way, you do not have to load your application with extra process. You only have to acquire and save. After saving in Binbary format, you can retrive it offline, convert it to ascii format and merge the data files of various cards to get one consolidated ascii data file.
hope this helps
Regards
Dev

HT201257 I have an iMac (Mid 2007) upgraded to Lion OS. My fan runs all the time at high speed. I tried the SMT reset without results. I could not try the AHT test because it is not on my computer or install disk. Any suggestions what I can do to correct

I have an iMac (Mid 2007) upgraded to Lion OS. My fan runs at high speed all the time. I reset the SMT without results. I had no way to do the hardware test.
Can I fix this high fan speed?

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
If the above doesn't help then create a new user account. Log into the new account. Does this fix the problem?

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and labview.

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and Labview 8.2 . I've found example code for generating pulses and creating intricate count setups but no straightforward examples of a simple counter. Any suggestions?

Hello tinfish,
I could not find a simple example that implements simple counting either, but it should be straightforward enough for us to try. Do you have the CTR module configured properly in MAX? If so, can you monitor the channels on your CTR 502 for input? Try connecting a square wave or some other digital pulse to the terminal to test the functionality of the counter module first (before programming). If you monitor the input channels with somethign connected you should see the count increment each time it sees a rising edge (assuming default configuration).
Once you've verified that everything works in MAX, you can set up your CTR module in a LV 8.2 project. If you need help with this, refer to the help document (look in the "Configuring FieldPoint in LabVIEW" section):
C:\Program Files\National Instruments\FieldPoint\documentation\Online Help\fplv.chm
You should be able to just read a channel tag from your CTR 502 using an FP Read VI. (Simply drag the channel from your project onto the block diagram). Since counting is the default behavior of the 502, there is no special programming involved to make it work.
I hope this helps -- if it's too high-level we can talk details about specific questions you have. Have a good one!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

Benefit from high speed arrival..........or not ?

Similar Messages

Maybe you are looking for