Benefit of having different network names for n- b/g networks on new AEBS?

This option is available when selecting simultaneous dual-band on the new AEBS, but I'm not sure of the benefit?

There are two main reasons you might want to do this:
1) You want to manually force your "n" devices to connect only to the "n" network regardless of signal strength.
2) You use your system in an area where signal strength varies such that your system switches back and forth between the 802.11b/g and 802.11n networks frequently.
You might also want to do it if you are for whatever reasons having problems with the AirPort driver's auto-switching.

Similar Messages

Multi playlist's on different screen names for XP

Right now we have four different play libraries in four different screen names. What I would like to do is consolidate all the libraries into one big library. Is there any way we can do this? The way we have it set up now is... if my wife and my two kids like a song and want to pay for it, they are paying THREE times for the same song!!!!! Our OS is windows XP...Please help before I go broke!!!! Thanks.
Message was edited by: ptdock

You can keep the separate libraries for ease of syncing, but share music among them.
See if this document is of any assistance:
http://support.apple.com/kb/HT1203
CG

Different ID names for Apple and iCloud

I apparently created my iCloud account with a different email address than I did my Apple account. I thought I knew which email address I might have used to create the iCloud account, but I am not being allowed to sign in. I there any resolution to this?

To make maters worse, I found something that may have been what I used as my log in, but now its says my account has been locked for security reasons, and when it asks to verify my personal information, the date of birth I entered isn't being recogninized. What the heck?!

To Select Data from Mutiple Table having different column name

Dear All,
I have 100 tables under one user Operation, each table has column containg the code of the Data Entry Operator, But name of the column in each table is different.
Can anyone give the script to run from SQL PLUS so the we can find the total entry of each D.E. Operator per month.
Thanks and Regards,
Manoj

Perhaps the UNION ALL operator is what you want.
SELECT data_entry_operator, count(*) AS qty
FROM(
SELECT de_oper AS data_entry_operator FROM a
UNION ALL
SELECT d_e_operator FROM b
UNION ALL
SELECT d_e_op FROM c
GROUP BY data_entry_operator;

Is there a way to use different NIC names in 10g RAC?

For example node 1 has ipge0 for private, ipge1 for private and node 2 has Solaris default e1000g0 and e1000g1? Or do interface names have to match on all nodes? I am not referring to IPs or subnets - just NIC names.
Here is some background.
This was a 2 node 10g RAC on Solaris that has been in operation for years. Node 2 experienced a corrupt root partition (OS, nothing to do with Oracle), so OS was reinstalled. After OS reinstall I copied /var/opt/oracle/*.* from node 1, changed them to reflect node 2 info, plus CRS related files from /etc/init.d, such as init.crsd, etc. This is shared Oracle home, so Oracle continued to run on node 1 just fine.
However, after crs startup nodeapps tells me "atlts04ra.atlts04.vip:ifconfig: status: SIOCGLIFFLAGS: ipge0: no such interface". Indeed, this interface does not exist on node 2.
So, is there a way to instruct oracle to use different interface names for nodes? Or will vipca ask for matching NIC names just like disk mount names have to match?
I want to avoid reinstallation of RAC because that will disrupt oracle database that has been running on shared oracle home all along.
Thanks.

Fzheng, I am very interested in your statement "however you can change the e1000g0 to ipge0".
You mean to say there is an OS script that will downgrade ipge0 interfaces to e1000g0?
I got some more information from SysAdmins yesterday. Apparently, when OS was reinstalled on node 2 after root partition corruption, they also patched it up to Solaris 10u9 (which by default created e1000g0-type interfaces). The first node still had 10u7 with ipge0 interfaces. We, the DBAs, were not aware of the upgrade. So, nodeapps cant start saying "no such interface"on node 2.
You are probably referring to script /usr/sbin/e1000g_transition.
Here is the description:
"DESCRIPTION
This script allows you to perform an optional driver upgrade
for the Intel PRO/1000 device present on this system from the \"ipge\"
network driver to the Sun standard \"e1000g\" network driver. The
e1000g driver include features such as link aggregation as well as
superior performance in most environments. Moving forward, e1000g
will benefit from new features as they become available, bug fixes,
and performance enhancements. The disadvantage is that some
applications configuration files may require modification to use
e1000g if they reference the ipge network interface.
This script must be run in single user mode.
This script will alter network interfaces and related system
configuration files. Configuration files for 3rd party applications
will NOT be changed. After running this script, applications present
on the system may require maintenance. The system may be in an
unsecured state. The effects of this script may be reversed using
the backout (-b) option."
So, if I understand you correctly, you are proposing to run this this script with the backout (-b) option on node 2, so interface names will match.
Is this correct?
Thanks.
Vladimir Grigorian.
http://vgrigorian.com

Use different column Name in Analytic View depending by logon session language

Hi everybody.
Is it possible to have different column names for ONE single Analytic View column depending by the Client session language?
For instance:
- we have one (only one) column name let's say that is 'fatturato' (for an Italian Client session) and 'invoiced' (for an English Client session) etc.. etc..
in other word the 'column name' changes depending by the language but the column is only 1 (one).
Is it possible to manage this and how? In SAP Hana Studio?
Is it possible to store in some way the different names of that column and relate them to the column itself?
Thank you in advance
Best regards.
Sergio

Hi Sumeet.
We already did your suggestion...
But after the action:
" tab--> Migrate--> Add---> OK"
what do you have to do to have a multi-language column naming?
Let's say we have a column name = 'product' (in English).
We'd like to have for the same column also the following name:
- 'prodotto' -> for Italian
- 'produit' -> for French
- 'produkt' -> for German
.. and so on
depending by the Client session language (and this has to be done automatically of course).
How this can be achieved?
Thank you
Sergio

Different fiscal variant for same controlling area

Hi,
as my client requirement is having 3 company codes two having same fiscal year variant another having different fiscal year for legal requirement operating under same same county.
i have maintain all the setting for the 3 company codes but .
but when i enter to maintain controlling area OKKP.
system is throwing following error.
Differing fiscal year variants: V3 - ZP
Message no. KT297
Diagnosis
Fiscal year variant V3, controlling area SQRE, does not agree with fiscal year variant ZP, company code 3000.
The following entries must agree:
u2022 Same number of posting periods (the number of special periods may vary)
u2022 Same period limits
Procedure
Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.
Please suggest me how to proceed further in this case.
thanks
kareem

Hi Kareem
What you are doing is not correct
All comp codes under the Contrr Area must have same FYV and same Ch of accounts
1. Go to IMG and assign same FYV to the 3rd comp code
2. Go to IMG > FI (New) > Global Settings > Ledgers > Define and Activate Non-Leading Ledgers
Here, activate parallel ledger for this 3rd comp code and assign the other FYV in the parallel ledger
Also maintain the Doc No ranges for parallel ledger because your FYV will be different between Main and Parallel ledger
br, Ajay M

I use the company's iPad at work that has a different apple id for iCloud than my own personal iPad at home. How can I change the company's iCloud id to synchronize with my own one?

I use an iPad 2 at work that has a different apple id for iCloud than my own personal new iPad. How can I change the company's id for iCloud to synchronize with my own personal iPad?

Go to Settings>iTunes and App Stores and tap the Apple ID listed and sign out and sign in with other ID
You also may want to go to other places like:
- Settings>iCloud
- Settinge>FaceTime
- Settings>Messages>Send and Receive and change the ID
It may be best to go to Settings>General>Reset>Erase all Content and Settings and start over again and set up the iPod again with his account/ID

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

Question about having name for 5 Ghz network

The subject title sounds stupid, but the question is straightforward. Do you tend to give your 5 Ghz network a different, separate network name in your Airport Extreme? In the "Wireless" options you are presented with the choice to give the 5 Ghz network a different name, thereby giving you the option to connect to the 5 or the 2.4. Is there any benefit to this? And if you don't give it a separate name, to which frequency does your computer automatically connect?

I think most users tend to use the same network name with "5 GHz" added to indicate which band they are using. The idea here is to simply identify the 5 GHz band, so Apple adds the "5 GHz" by default unless you change this yourself.
The benefit to assigning a separate name to the 5 GHz band is that you can "force" a computer to connect to this band. Surprisingly to many users, this can also be a negative (see information below). Or, if you plan to "extend" your wireless network with an AirPort Express, you can choose to extend either the 5 GHz band or the 2.4 GHz band.
If you don't assign a separate name to the 5 GHz band, your computer will automatically connect to the signal with the best combination of strength and low noise.
Because 5 GHz signals are absorbed by walls, ceilings and any other obstructions much more quickly than 2.4 GHz signals, your computer will likely connect to the 5 GHz band when it is the same room as your wireless router or it has close to line-of-sight with the wireless router. Once you are a few rooms away, or down the hall and around the corner, your computer will likely connect to the 2.4 GHz band because these signals "travel" better.

How can i give 2 different names for the same attribute in querypannelVC

Hi
I have a View criteria and exposing as a query panel.In the VC, we are using one VO attribute instance twice"FullName".We have a requirement of display 2 different names for this attribute in the query panel Ui.Attached the VC screenshot.
Ex:Present in the Query panel Ui fields are displaying like
FullName
FullName
Requirement:
Owner
Assignee
Thanks in Advance,
Naga

Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

Problems assigning different locations to different Network Names/AirPorts

At my office, I have two different networks:
1. AirPort where I need to use a static IP setting on a my Mac.
2. Airport where I need to use a DHCP.
I would like to assign a network name (AirPort A) to one Location A and another network name (Airport B) to Location B.
Previous to the Intel-Chip Macs this was no problem at all. Then the Intel-Chip Macs came which had 10.4 installed, and it was no longer possible to assign certain network names to certain network locations. However, with 10.5 this problem was solved until most recently, when I realized on a few of my Macs that it would not switch to the other AirMac, even when I switched the locations. The proper network names are assigned to each network locations.
It is likely a problem with Keychain, but I even tried to reset my Keychains and also erased the complete "login" Keychain and created a new "login" Keychain. But I am still experiencing the same problems.
Has anyone experienced the same problems and found a way to solve this problem.

> We would like to setup up a group policy and apply it to the users who
> are in the remote locations with the RODC.
Link your GPO to the respecitve Active Directory Sites.
> We would also like to have a
> different group policy setup for a particular group in our headquarters.
Read about Security Filtering.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

I am getting different Names for one Shift_ID...

Hi Gurus,
I am new to Oracle report and trying to fix one bug.When I run a report with a particular Shift_ID , I am getting different Customer_Service_Representatives Name in the report.
I checked the sources of each columns in the Layout.
I have also gone through the tables used in the report(actual datas are in Prod for which I have no access) :((
I am Stuck and its not working...
PLease Help!!
THanks

Hi
the thing is the shift ID where they are having problem is in the production Another choice pls define the problem if u can't define (but u didn't mention it)and suppose a solution for it to guarantee a valid data output.
I have to modify the package associated with the Report.if they depends on shift ID that have problem is in the production and needs to modify modify it temporary with a static test data purposes.
and if i got ur point clearly and if i were u i would ask for any hard copies or documents related to this report that would match with the production if it is necessary to have a specific shift ID and i had a limited access to DEV and TEST access.
make sure that u r having a valid data in TEST or dev user otherwise pls try to invent a use case or test data with a new shift_ids and new Customer_Service_Representatives Name and try to test .
Hope this helps...
Regards,
Abdetu...

Necessary to have the same wireless network name for using WDS?

I have set up two Airports in WDS mode. I did this so my ps3 could get on the internet via ethernet (its an older model, and doesn't have wireless, so you have to use an ethernet bridge). I set up the WDS fine, and my Airport extreme base station (the square one) is the WDS main, while as my old Airport extreme (snow) is the remote, which I use to run a cable from to my ps3 to access the internet. This works fine when I have the network names for each base station the same.
I was under the impression that you could have two different named wireless networks for two base stations (i.e .they have different names), as long as you have the MAC addresses set up correctly for the WDS settings (i.e. main and remote). However, when I do that, I can no longer access the ethernet from the remote base station on my PS3. I can only access the ethernet via my PS3 if I have the wireless network for each base station literally named the same. Seems kind of strange if you have the MAC addresses set up correctly for the main and remote, as shouldn't they be talking to each other via that mode, and not the actual wireless network name?
I would like to have each base station with its own wirelss network name, so I can differentiate between them. I get some strange issues when my airport card scans, it frequently switches between base stations, and this slows down certain programs (i.e. VPN connections for mail etc).
I set this up pretty literally from the airport guide from the apple site.

I was under the impression that you could have two different named wireless networks for two base stations (i.e .they have different names), as long as you have the MAC addresses set up correctly for the WDS settings (i.e. main and remote).
No that is not correct. Since the 2 are working together to create a single wireless network, they must use the same network name.

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Benefit of having different network names for n- b/g networks on new AEBS?

Similar Messages

Maybe you are looking for