Benefits Configuration - need guidance

Hi All,
I have the following situation and seek your guidance to do the config accordingly.
1. Some benefit plans are eligible for one set of employees based on their Paygrades - can I set the eligibility criteria for these plans for employees based on their TRFGR in feature ELIGR. Pls let me know if I am right in this approach.
2. Some benefit plans are closed and are available only for those employees who have already enrolled. So, this plan should be available only in the adjustment reason and only as change or delete. This plan should not be configured in Standard Selection. Pls confirm if this would meet my requirements.
3. One benefit plan is available only for new employees. How should I achieve this through config. I am not sure how to go about this.
Would appreciate if you can kindly help me in this.
Regards,
Lakshmi

Hi Lakshmi
Here is what I think:
1. To enable eligibility based on Pay/Salary, you need to do following:
a. Make sure Salary Groups are defined
b. Link it with eligiblity grouping
2. Immediately after a plan is closed, and you want it to be available only to employees already enrolled in the same plan. In this case, nothing special is required, just change the plan status to closed. In case, you want another plans to be available to employees who have enrolled to closed plan, make sure you have an entry in table V_T74FY indicating such condition.
3. It is not possible with simple configurations because Benefit eligibility citireria can be defined based on: 1. Number of hrs worked, 2. Number of Days/Month/Year worked, 3. On a specific Date in Future
To achive your client's requirement, you may try following: (Note: This may not be the best solution)
Lets say you have Plan A, Plan B, Plan C and Plan D, of which Plan A should be available to new hires.
You can create two plan groups, as:
PG1 = Plan A, Plan B, Plan C and Plan D
PG2 = Plan B, Plan C and Plan D
Now make sure new hires are automatically falling in PG1 Group. And rest in PG2. You can develop this case from here on.
Thanks
Yash

Similar Messages

Need guidance in displaying graphics shapes on image

I would like some help drawing a circle over an image which is displayed in JScrollpane through JLabel, The goal is, whe we click over the image, the image apperas with a small circle in the place we have clicked. I have used JLabel for displaying image in JScrollpane by using imageLabel.setIcon(new ImageIcon("default.jpg"));
I need to draw circle/rectangle when i click on image by this i need to select different points in the image by drawing circles/rectangles over the image.
If you understand my problem than please guide me for the same.
Thank you

Don't post the same question multiple times. It's rude, as it leads to people wasting their time duplicating each others' answers.
http://forums.oracle.com/forums/message.jspa?messageID=9385315#9385315
http://forums.oracle.com/forums/message.jspa?messageID=9385314#9385314
Need guidance in displaying graphics shapes on image

Need guidance on statspack report

Hello Friends, How are you. I hope you all will be fine.I need guidance on statspack report. I do not know how can i resolve wait events. Please help me and give me some time for considering statspack report. If any one willing to do my help its really honour for me. In reply just show me email address and i contact you for you kind consideration.
Thanks in advance

Either post the report here, or send it to me at [email protected], and I'll try to give my 2 cents on it.
Daniel

Configuration needed for SOA call to create PO in classic scenario

Dear Experts,
We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi Vardhan,
Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
Regards,
Nikhil

What are the configuration need between R3 and XI when we use RFC sync adap

hi,
What are the configuration need between R3 and XI when we use RFC sync adapter.
Regards
siva.

if its the sender adapter ref:
RFC adapter
Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Receiver;
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Also;
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

I'm looking for Apple desktop P.C. as an upgrade from my Dell /windows XP. I need guidance.

I currently use a 6 yr. old Dell Vostro 200 (Windows XP). I want to upgrade to an Apple desktop PC. I need guidance to a product. Are any peripherals compatible (ie. screen, printer, Maxtor hard drive)?

Almost all peripherals are compatible. I'd recommend reading https://www.apple.com/support/macbasics/ and if you have an Apple Store in your general area stop buy and ask questions. You were not specific as to what screen, printer etc... that you want to use with the iMac and that is all important so you can verify they are compatible.

Any special configuration needed for Print PDF?

To print as PDF is there any configuration needed to be set.

Hi,
the only thing to pay attention is when you have to print large PDF and you receive this error: AGEGTYVF.
Refer to this doc in the Oracle Support: Printing A Large OBIEE Answers Report Or Dashboard To PDF Fails With Error Code: AGEGTYVF
Regards,
Gianluca

OIF-Logout configuration- Need clarification

Could someone please highlight what are configurations need to enable logout for Oracle Identity Federation. Is it just as simple as invoke URL: /fed/user/logout.
Should this URL be invoked from SP host or IdP host?
Thanks

To configure Logout at SP side.
===================
1. Go to Fusion Middleware Control and navigate to the Oracle Identity Federation instance.
2. Navigate to Administration, then SP Integration Modules. Click the Custom SP Engine tab.
3. To modify an SP integration engine, select it and:
*Enable logout engine
*Set "/logout.jsp" as the Logout Relative Path of the SP integration engine
4. Save your changes
Implementation of logout.jsp
<%@page buffer="5" autoFlush="true" session="false"%>
<%@page language="java" import="java.net.*"%>
<%
response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setHeader("Expires", "Thu, 29 Oct 1969 17:04:19 GMT");
request.getSession().removeAttribute("feduserid");
request.setAttribute("oracle.security.fed.sp.engineid", TEST_ENGINE_ID);
request.getSession().getServletContext().getContext("/fed").getRequestDispatcher("/user/logoutretsso").forward(request, response);
%>
=====================================
Launch the logout process by accessing a URL of the form:
http://hostname:port/fed/user/logout?returnurl=http%3A%2F%2Fanotherhostname%2Fpath
The logout service takes a returnurl parameter, which is necessary for correct operation; the user will be redirected to this URL after the logout process completes.

For showing smartforms through dynpro,Is there any ADS Configuration need ?

Hi,
I am showing smartform through dynpro application . So Is there any adobe document service configuration need for same.Please provide details if possible.
Regards,
Gurprit Bhatia

Thanks Arafat and Amit for quick answer,
I am working one application in which i am showing smartform through dynpro. In development this application shows Smartform as PDF but When i try same application on Quality or Production . It does not show anything means pdf does not generated.Is there any note for that.
Regards,
Gurprit Bhatia

What configuration needs to be done so that the requirement appears in CPPR

Dear Experts,
What configuration needs to be done for a product category so that it appears in CPPR?
I was running a test scenario where the Product category was relevant for CPPR. However, after the creation of the Purchase requistion, I could not find the requisition in SRM SOCO to assign a source of supply/
Thanks and regards,
Ranjan

Hi
what are the configuration existed in ECC for transfering PR to SC or BID Invitation ?
did you do sourcing configuration for this material group?
Hope you might done XI configuration to connect SRM and ECC ?
Muthu

Need guidance to solve the problem.

my internal hard drive is not showing up on mac. need guidance to solve the problem. thanks

Hi,
First make the finder the Front app.
The Finder Menu > Preferences > General Section should have the Hard Drive item ticked to show the Hard Drive on the Desktop.
The Name of the drive should not have a . at the beginng as in .Mactinosh HD as this will make te file Invisible.
There are also other characters that cause this.
If you go to the Finder > Go Menu and select My Computer it should have opened a window displaying the Volumes ( Hard Drives and storage devices) that are connected.
10:17 PM Sunday; April 14, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

BASIS Configuration needed to send an external mail from SAP Program

Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
Regards,
Subhasish

Hi Subhasish,
Please go thru the below link.
Re: SCOT Configuration--for external mail
Regards,
Lakshman.

Benefits Configuration - Basic Coverage Amount Capping

I am mostly familiar with the Benefits Configuration and currently have an issue with capping the Basic Coverage Amount.
I have capped the Insurance Coverage amount in the field - V_74FC_B-MAXAM and this works correctly however I am struggling to cap the Basic Coverage Amount - does anyone know what I could try to achieve this?
Many thanks,
Danny Boy

Hi,
I am not sure if I got your query right. You wish to configure two limits (basic coverage amount and insurance coverage amount) in a single plan?. What you have configured in V_74FC_B-MAXAM, is the maximum allowed coverage in this insurance plan (It refers only to the base coverage for this plan. It does not refer to the additional coverage units).
You would require separate plans if you wish to cap at different limits on the coverage amount.
Hope this helps.
regards
Sharath

Configurations needed for Proxies.

What are the all configuration steps for using a Server proxy.?

Hi Soumyasanto Sen ,
Proxy generation converts non-language-specific interface descriptions in WSDL into executable interfaces known as Proxies. Depending on the target programming language, you choose one of the following:1. Java Proxies. or 2. ABAP Proxies.
We can interface to XI through proxies. From WAS 6.20, proxy generation feature enables application systems to communicate with XI using proxies. Proxy generation enables you to create proxies in application systems. Proxies encapsulate the creation or parsing of XML messages and the communication with the relevant runtime components required to send or receive the messages.
There are two types of Proxies.
1. Java Proxies.
2. ABAP Proxies.
Java proxies are used when java applications needs to send and receive data and ABAP proxies are used when ABAP applications needs to send and receive data.
The following websites contained detailed explanation (PDF & PPT docs) on Configurations needed for Proxies:
Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To activate ABAP proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Detailed step-by-step solution for ABAP proxies in XI
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
cheers!
gyanaraj
****Pls reward points if u find this helpful

Benefits Configuration - need guidance

Similar Messages

Maybe you are looking for