Benefits of Airport Express wireless printing VS. built in printer WiFi?

I currently use an Airport Express N to enable my old HP laser jet for wireless printing. The HP just stopped working and I need to buy a new one. I'm seeing built in WiFi in some printers today, so I'm wondering if there is a benefit to still using the Airport Express N for my wireless printing vs. the built in WiFi of the printer?
Thanks.

I do not currently use an iPhone, though I plan to. Any idea if you can wirelessly print from an iPhone with a printer with just built in WiFi vs. doing it from an Airport Express?
Thanks.

Similar Messages

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Airport express wireless connection freezes SSH connection - any fixes?

airport express wireless connection freezes SSH connection - any fixes?
so i am using an airport express and remotely access computers/servers via SSH. port forwarding is set up and the computer has a fixed local IP address.
if i continue to issue command in the shell, then the connection persists. however, if i leave it idle for some amount of time more than a half an hour, both terminal and xterm (X11) freeze for a considerable amount of time. then they time out and return to a active shell on the local computer.
i have since determined that this does not occur if i am using a direct (built-in) ethernet connection.
is this problem fixable? are there settings in airport admin utility that can be changed to prevent this from occuring?
any advice or pointers would be tremendously appreciated
stefanos

hi bill,
thank you for the suggestion. i added the lines to my .ssh/config file and so far it seems to have solved the problem.
i'll evaluate it over the next few days and post back if i notice any problems. it seems to achieve what i was thinking at least conceptually. to somehow, while idle, send something to ensure the connection stays alive.
many thanks for the solution. it's been a nagging issue and it's great to be likely rid of it.
stefanos
Powerbook G4 & iMac G5 :: Mac OS X (10.4.9)

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

How many devices can you use on an airport express wirelessly?

How many devices can you use on an airport express wirelessly? Does it matter how many devices you have?

The Express supports up to ten clients.

HELP ibook g3 OSX 10.2.8 no longer detects airport express wireless network

my ibook G3 OSX 10.2.8, airport admin utility software 3.1.1 no longer can detect the airport express wireless network (powerbook G4, OSX 10.4.11, airport admin utility 4.2; airport express, WEP protected, to DSL modem). i just installed an ipod driver update on the ibook, and wireless networking went down on restart. any help greatly appreciated!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

PCs suddenly no longer see Airport Express wireless network - please help!

Hi,
I am new to this forum and I need help. Two days ago - without me making any changes to settings etc. my Airport Express wireless network at home was no longer visible to any of my devices except to the Powerbook (G4 OS 10.3.9) which controls it. From one second to the next two Vista laptops and my cell phone (Nokia, Symbian OS).
My Powerbook has no problem connecting through AE to the internet. The two laptops are both able to connect to other wireless networks so they don't seem to be the problem. I just don't understand what caused this sudden drop-off/invisibility.
I have already tried the following: resetting the base station, changing the channel on the base station (from automatic) removing the network security altogether (from WPA2). But none of the devices except the powerbook can now see or detect my network.
Please - if anyone knows what the cause of this problem could be or how to fix I would be very grateful!!

you name it : com.apple.airport.adminutility.plist
delete it and do as advised.
This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
You cannot destroy something with these actions, because it is Unix maintance so usual routines.
A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
Best wishes from Germany

Cannot connect Airport express wireless

Hello, cannot connect airport express wireless to linksys router. Connected now with ethernet cable but cannot figure wireless connection. My laptop cannot find the express while preforming setup scan, yet I'm connected to it. I can connect with my iphone but not wirelessly. Any suggestions?

....I was then told over the phone that airport express will not connect to third party routers.
This is NOT correct.
The AirPort Express will connect to a wireless network if you know the following:
1) The name of the wireless network
2) The exact setting for wireless security that the network is using
3) The wireless network password
Most users know 1) and 3), but very few know the exact type of wireless security settings that their wireless router is using. The Express will not connect to the wireless network unless it receives all of the information listed above.
So...we will assume that you know the name of the wireless network and the password for the network.
Do you know the exact type of wireless security setting that your wireless router is using? If not, the Express will not connect.
You may need to check the setup of your wireless router....or if the router was supplied to you by an Internet Service Provider, they may be able to tell you what type of wireless security setting is being used.
Post back when you have this info and we will proceed. There are still no guarantees that the Express will connect....but at least there may be a chance.

Linking Dell Laptop to existing/working Airport Express wireless network

Hi,
I'm trying to connect a Dell Laptop (Inspiron 2500) running on Windows XP to an existing and functionning Airport Express wireless network set up for my girlfriend's iBook. It works perfectly for the iBook.
I have outfitted the Dell with a D-Link wireless G USB adapter and I see the network (i have the password) and it says I am connected to the network (even says connection is very good).
However, when I open the internet browser, nothing.
The network set up is: Cable to RCA Digital modem (model DCM425) to Airport Express (via ethernet) and to computer.
I have tried playing around with the Dell Laptop settings (IP, DSN, etc ...) and I have called everyone involved (including Apple) to no avail.
Any help would be greatly appreciated!
Thanks,
Nick
Dell Laptop Windows XP iBook

Thanks for the reply.
WEP is enabled. As far as the encryption, I'm not sure. I believe that it's 64-bit, as the password for the network is a five-letter word.
The funny thing, though, is that I had been using an IP address which I found on my girlfriend's Ibook, which allowed me to connect to her AEBS network, although the internet browser showed no connection.
Following directions from somebody else, I removed the IP address to enable DHCP, and then I was able to connect to other networks in the area (and the browser also connected to the internet) but I couldn't get onto her network anymore. Even with the password ...
Any ideas?
If i'm supposed to upgrade to 128-bit, how should I go about doing that?
Thanks again for the reply.
What encryption are you using?
Do you have WEP enabled?
The problem you are having probably lies with the
encryption key.
ccessing a Airport Network with a Windows XP PC or
laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or
laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Intemittent dropouts connecting through NBN Australia Skyedge2 satellite modem, via Ethernet is fine, but Airport express wireless is unreliable!

Intermittent dropouts connecting to NBN Australia Skyedge2 satellite modem. Via Ethernet is fine, but Airport Express wireless is unreliable! In particular https and getting mail. This problem did not occur on previous Optus satellite AGBG satellite system. Is there a different mode required for AAE?

I continue to have the problem with dropouts to satellite internet via airport express. My isp has loaned me a Linksys (Cisco) E1200 wireless router which I have connected and it works flawlessly. Maybe my AEx is faulty?

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

Will the use of an Airport Express widen the range of my existing wifi?

Will the use of an Airport Express widen the range of my existing wifi?

Yes, but only if your existing WiFi is being produced by another Apple wireless router.
The AirPort Express is almost certainly not compatible if you are planning to connect using wireless only with another brand of wireless router.

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Estoy tratando de instalar un airport express como repetidor de señal de wifi utilizando como base un router de telefonica del Peru modelo ZTE zxv10 w300 y no he logrado hacerlo. Alguien sabe si es posible y en caso lo sea como se hace?

estoy tratando de instalar un airport express como repetidor de señal de wifi utilizando como base un router de telefonica del Peru modelo ZTE zxv10 w300 y no he logrado hacerlo. Alguien sabe si es posible y en caso lo sea como se hace?

Yes in an STL file the subs have a comma after each In and Out Timecode (as a separator) and also they don't normally have line spaces between each entry. If you want the subs to be on two lines and "force" what goes on to the second line (rather than SP deciding for you) then where you want the return to be you need to add "bar" symbol (the one above the backslash on a Mac keyboard)
Try it on a couple of lines of your subtitles to see if it works before committing. I usually create my subs as STL files but it should work
Steve

Can Airport Express speed up my Macbook Pro's Wifi Connection?

Hey all
Just a thought, I'm with Virgin Media for my broadband and my Macbook and iPhone can be rather slow on the network. Plenty of devices on but my parents broadband speed should be plenty to manage them all.
My question is, if I purchased an Airport Express, would that maybe speed up my Wifi connection on my Macbook?
Not to sure so thought I'd ask
Thanks
Rob

Hi Bob,
My router and the Airport Express is located directly beneath my bedroom so within perfect range I'd say. I get between 2-3 out of 3 bars of wifi signal on my iPhone and 4/4 bars on my Macbook so I'd say I'm close enough however I have been thinking of trailing a network cable from the router to the airport express through the floor and putting the airport express in the same room as me.
Thanks
Rob

Benefits of Airport Express wireless printing VS. built in printer WiFi?

Similar Messages

Maybe you are looking for