Benefits Participation Print Confirmation Form

There is a Print Confirmation Form link on the Benefits Participation page that brings up an adobe form with a benefits summary. Where that form is located, maintained, and how can it be changed?
Edited by: David Keiser on Feb 25, 2009 12:33 AM

Hi,
Go to Flexible Admin-->Form setup -->Assign templates to form types.
And also in
ESS >Home Page>services-->EMPLOYEE_FLEXBENS_PRINT_FORM & EMPLOYEE_FLEXBENS_PARTICIPATION
Resources-->EMPLOYEE_FLEXBENSPARTICIPATION_SERVICE
Here give the URL for Benefits Participation.
Kind Regards,
Saisree.S

Similar Messages

Print Confirmation Form: All Plans

Dear Experts.
I want know What is the name of the service(link) that is closed in the box green for put this service out in a subarea. In this moment this service is a link in the iView of Benefits Participation
Attach Image following:
[Print Confirmation Form: All Plans|http://www.freeimagehosting.net/uploads/312757289a.jpg]
Thank in advance for your help.
Best Regards
Juan.

Dear Suresh
I checked the Views V_T7XSSSERSAR & V_T7XSSSERSARC using SM31 in the backend, but I don't found a service assign to Subareas with Text "Print Confirmation Form."
I also check the view V_T7XSSSERVSRV and not exits a service with Service Link Text "Print Confirmation Form..."
Can I put this service as a link in a Subarea?
Thank in advance for your help,
Best Regards
Juan

Print Confirmation Form link missing

We recently upgraded to ESS 603 and now on the Benefits page we no longer have the link at the bottom that says "Print Confirmation Form: All Plans".
Any idea how to get it back?
Thanks,
Jennifer

But the OSS Note [1240906|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1240906] says ESS_603 will fix this issue.
~Suresh

ESS Benefits Participation overview print form HRESS_BEN_CONF

Hi
We are trying to use the print form HRESS_BEN_CONF for benefits participation overview. However, when clicking on the print icon, a pop-up comes out with no pdf form. HRESS_BEN_CONF exists in SFP but not showing up on ESS. Configurations all look ok.
Is there any checks thats to be done?
Thanks

in Standard it will point to SAPScript form HR_BEN_CONF.
You can change this to point to Adobe Form.
Maintain the form name HRESS_BEN_CONF and check the ADOBE radiobutton in table V_74HL_1

ESS 1.41 Benefits Confirmation Form

We are implementing ESS 1.41 on ECC 6 Ehp4.
When Open Enrollment is on the Completed Screen (Step 3) there are four links and The HR Team Lead wants the link 'Print New Plan Selections' changed to 'Print Confirmation Statement'
What do you want to do next?
Go to Benefits Participation Overview
Go to Benefits and Payment Homepage
Go to Employee Self-Services Homepage
Print New Plan Selections
Is there a simple way to make this change?
Change via iView personalization - how to you find the parameter for the iview?
Change via IMG - What is the Link Key
Or is there some other way?
Your assistance is appreciated!
Thank you,
D. Maupin

I have reviewed this note but do not understand how this applies to our problem which is:
Need to change the link text for the 'Print New Plan Selections' link which appears on the Open Enrollment Completed Screen
When I go to IMG - ESS - Homepage for Self-Services - Services - Define links on confirmation page there is no entry for the 'Print New Plan Selections' to change the text. Even though this link shows up on the final page for Open Enrollment.
Thanks,
D. Maupin

Customize Benefits Confirmation Form

Hello,
I need to customize the Benefits Confirmation Form (part of the ESS Benefits Participation page). I haven't been able to find this form in the backend. Is it a Smart Form? What is the name?
The Benefits Participation page is in:
Content Provided by SAP -> End User Content -> Employee Self-Service -> iViews -> Benefits and Payment
Thanks,
Scott

Hi Scott ,
What is the version of SAP-HR ,EA-HR and ESS/MSS Components .
Some applications r not available in some releases . This application will be availabel in enhancement pack 603 above .
Check with SAP .
Surekha.

HR Benefits Confirmation Form

Hi,
I am working on HR Benefits Confirmation form. I am found some extra symbols like 'IF' , 'DEFINE' on the standard form.
Could you please any one suggest how to remove that works

Hello,
IF is standard keyword used to check any condition and DEFINE is keyword to define a variable in the Form. these are related ABAP coding.

How to setup benefit confirmation form in ESS?

Hello experts,
Would you please share your note on how to setup the benefit enrollment and confirmation forms from ESS side.
We have the form and the relevant configuration in view V_T74HL. Not sure how to do from ESS side. Does the ESS
calls the same form or we have to create a new? Moreover, what happens when we make changes in the forms on SAP
side, do we have to duplicate the changes on ESS side as well.
Please advise.
Thank you.
saplover20

Ok....follow below...document...you will get all your answers.....if its overview page for Benefits and Payments....
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d?quicklink=index&overridelayout=true

Print Confirmation (CO11N)

Hi PP's.
Pls, I need to print a document at the confirmation time (with CO11N).
The user need the Activity Times and Goods Movements.
Pls, tellme if exit a standard form (sap script / print program) and the config steps in order to do this.
thanks.

Hi,
You can Print Confirmations & Goods Movements (GI) through making necessary customization in OPK8 :
In OPK8 you select option : List Control for transactions
IN this option you can see different types of List available for printing like
LV02 : Confirmation Slip
LK02 : Goods Issue Slip etc
You have to tick the check box beside above two options and make necessary Printer Settings in Printer Specification option in OPK8 only.
You can do other way also by selecting appropriate Control Key in Work Center -
> Default Values which have Prt Cnf check box ticked. You can check this in Work Center ---> Default Values ---> Control Key enter F4 on control key and then go inside you will find Overview and select respective control key with PRt Cnf check box as i told you above.
If you dont have control key with above requirement then you can create control key in OP00 with indicators of :
Print Confirmation
Print Time Tickets etc and then assign it in work center so it will be copied in routing.
BY this way also you can automate your confirmation printing.
Pls. try above settings and revert if any doubt.
Hope it will resolve your problem.
Reward if useful.
Regards,
Tejas Pujara
Edited by: Tejas Pujara on Jun 18, 2008 6:36 AM

Error when trying to print a form

Hi all,
I'm getting the following error when I try to print a form (transaction SFP - Form Builder):
Cannot find PDL type for output device LOCL
Message no. FPRUNX113
Does anybody know why I'm getting this error? I get it for all forms I try, but not when e.g. I print some source code in se80..., so I guess it's not due to my printer settings.
tia,
Jeroen

Hi Jeroen,
Maybe you don't have in the TSP03 table the Printer Declaration for the LOCL Output Device (TSP03-PADEST field).
Please take a look at SE16 transaction to confirm it.
NOTE: Try to see also the ADS_GET_PRINTER_ATTRIBUTES function module and the LFP_PRINTPRI include, the error you are getting is occurring in the Line 60 of that include.
Regards,
Daniel Carvalho.

Wrong Header Discount at Order Confirmation Form, /SMB40/SDORC_A

Hi All,
I have set the smartforms, /SMB40/SDORC_A as the print out form for Order confirmation. However, it is found the header discount shown on that form is always wrong.
For example, the header discount is 6.00% but shown as 60.00%.
Could you let me know what's the problem?
Cheers,
Chris.

Dear Chris,
Please check note 852250. Also check the following settings:
1. User setting -> Defaults tab
2. IMG -> SAP NetWeaver -> Set Countries -> Define Countries in mySAP
Systems.
I hope this helps.
Best regards,
Ian Kehoe

Err print confirmation ?

Hi,
In benefit management , when i want to print the confirmation for the benefit plan , i got the err: like : 'No entry for form type B2 " .. Could you help me out for this
Thanks

Hi Arun,
Thank you very much for your reply,
I got this error for all employees , i can not print confirmation but i can enroll them.
In the setup form IMG i left it default ( There are 2 SAPscript form for confirmation and infomation ) But i changed nothing ,,,, So i think that the default will be used...
Till now i still get the same error
Thanks,

Printing PDF forms to an impact printer

Greetings,
I hope I've found the correct forum for this question.
We are having difficulty printing PDF forms to an impact printer. We are required by regulations to print to multi-part forms from our GTS landscape, which is going live soon. Since Adobe is the direction SAP is headed with forms, we have been utilizing ADS. However, the need for impact printing has presented a problem. Has anyone utilized PDF printing to an impact printer? I'll list some details in case it will help.
Printer: Lexmark Forms Printer 2590
Backend Print Solution: HP Output Server on AIX
SAP GTS: NetWeaver 7.0 SP17 w/ SLL-LEG 720 SP7
Our printer has printer languages of Epson Emulation and Personal Printer Data Stream (PPDS). Neither of these are included in the standard device types for PDF as specified in OSS Note 685571. I do not see an appropriate XDC file to copy and modify.
Has anyone else run into this issue and found a resolution?
Many thanks for your assistance.
Wesley Tollett

the PortName should be changed accordingly.
if you are using printer port , commonly lpt1, you should change it to lpt1
ur command line could work , i think
i've tried it locally in my machine, it works fine.

Print multiple forms between FP_JOB_OPEN and FP_JOB_CLOSE

I am aware, that there are questions regarding "Printing Multiple forms", but I didn't find answers there.
Still my system is not working as expected:
1. FP_JOB_OPEN is called
2. the generated Adobe Forms function is called multiple times
3. FP_JOB_CLOSE is called
This program doesn't deliver all the pages, but just the first call. How shall I solve this problem?
(Coding should work anywhere with copy-pase.)
data: fm_name           type rs38l_fnam,
      fp_docparams      type sfpdocparams,
      fp_outputparams   type sfpoutputparams.
parameters: p_fpname type fpname default 'FP_TEST_02'.
* Get the name of the generated function module
call function 'FP_FUNCTION_MODULE_NAME'
exporting
    i_name     = p_fpname
importing
    e_funcname = fm_name.
* Sets the output parameters and opens the spool job
call function 'FP_JOB_OPEN'
changing
    ie_outputparams = fp_outputparams
exceptions
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    others          = 5.
* Call the generated function module
call function fm_name.
* SECOND CALL ****************************
call function fm_name.
* Close the spool job
call function 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.

Hi ZSOLT,
In order to call the form multiple times please do the following,
1) Just before your FP_JOB_OPEN you need to pass the output parameters (good practice). You can also set other parameters as well (for example nodialog, preview, copies., etc)
CLEAR fp_outputparams.
fp_outputparams-dest = 'PDF1'.      "Default pdf printer
fp_outputparams-reqnew = 'X'.       "New spool request
Now call your FM FP_JOB_OPEN with the above output parameters.
2) Usually this step is processed in a loop. (getting your interface data into a internal table and then looping at it)
But here I am enhancing your example code.
In order to trigger the form multiple times you need to change some input data to the form (for example I have changed date and time below in the prepare test data sections) so that the call function fm_name gets regenerated every time there is new data
data l_datatypes       type sfpdatatypes.
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20040613'.
l_datatypes-time = '100600'.
l_datatypes-lang = sy-langu.
FIRST CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20100913'.                 "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-time = '10700'.                        "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-lang = sy-langu.
SECOND CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
Close the spool job
call function 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.
I have tested the above code and I am getting multiple forms.
Please try on your end and let me know if it works.
Thanks
Raj

View/Save/Print Embedded Form on Webpage to PDF

How can a user View/Save/Print Embedded Form on Webpage to PDF?

Hi,
Currently FormsCentral does not support to View/Save/Print Embedded Form from the Webpage to PDF. If you are the form author, you can save/print the form to PDF in FormsCentral, and the PDF forms can be viewed in Acrobat or Reader.Or if you like, you can save/print the entire web page to PDF using the browser, but the form could not be submitted then. I hope it's clear, and please let me know if you have any questions. Thanks!
Kind regards,
Shiyao Bao

Benefits Participation Print Confirmation Form

Similar Messages

Maybe you are looking for