Benefits userexit for insurance plans

Hi,
I am working on modifying an benefit userexit (ZXPBEU08). To evaluate the EECost and ERCost, I need to obtain the service years for the employee, it comes from infotype 41. How can I grab that information in this userexit?
When I added the code related to infotype 41, it resulted in error saying that this infotype and table has been declared in another userexit ( related to infotype 41 - ZXPBEU20).
Any ideas as how to go about it?
Thanks in advance,
VG

I tried it. It throwed an error that table declaration that I had done for infotype 41(PA0041) in the benefit userexit is not applicable. The message was the table has already been declared in ZXBEU20. But if do not declare, my existing code in the benefit userexit does not work.
Also my question is, am I adopting the right approach, because this userexit(in the debug mode) only stops when I am in the benefit infotypes like 167, 168 for an employee. Being in infotype 168, am I able to grab the infotype 41 data for that employee?
Let me know,
Thanks,
VG

Similar Messages

How is the Basic Coverage amount calculated in IT0168 for Insurance plans?

Hi All,
I am in the process of configuring benefit plans for IT0168 -GB can anyone of you help me with the below?
How is the basic coverage amount caluclated - can you please advise configuration for the same?
Many thanks in advance.
Regards,
Anjali.

1. Configure the Plan Type for the Insurance Plan.
2. Configure the Insurance Plan
3. Coverage Grouping ( if needed ) - Different coverage based on Employee IT0001 information / IT171 Grouping.
4. Configure the Coverage Variant - If coverage varies by ( Parameter grouping ) Gender, Age, Smoker, Length of Service,
5. Configure the Coverage where one specify the actual cost per unit of coverage ( example 0.25 cents per $ 1000 coverage ).
Path for above items...
Personnel Mgmt ---> Benefits ---> Plans -
> Insurance Plans....

BENEFITS: CLAIMS AND INSURANCE PLANS

Dear Experts.......
Let's say that we have an INSURANCE PLAN in a company and on in one hand I want to watch the receipts and and the bills of the employees...
HOW CAN I COMBINE THE SPECIFIC INSURANCE PLAN WITH THE CLAIMS?..........
Thank you very much!!

I tried it. It throwed an error that table declaration that I had done for infotype 41(PA0041) in the benefit userexit is not applicable. The message was the table has already been declared in ZXBEU20. But if do not declare, my existing code in the benefit userexit does not work.
Also my question is, am I adopting the right approach, because this userexit(in the debug mode) only stops when I am in the benefit infotypes like 167, 168 for an employee. Being in infotype 168, am I able to grab the infotype 41 data for that employee?
Let me know,
Thanks,
VG

Help, please - Combined Limits and Expressions for Insurance Plans

I seem to be configuring something incorrectly using the Combined Limits and Expression in the IMG. I was wondering if somebody has used this successfully and can give me some pointers? I've used it successfully when I've limited a plan to coverage of not more than 50% of the coverage for another plan, but I can't seem to get it to work for my current requirement. Here is my current requirement:
I have 2 life insurance plans, one basic and one supplemental. The supplemental can only be elected if the basic plan is elected, so the basic plan would be the priority plan. The individual maximum allowable coverage amount for each plan is $3,000,000, which is configured under the coverage rules. However, the combined limit between the 2 plans is also 3,000,000. A person can have the basic plan only and have the full 3 mil, or they can have both plans and must not go over the 3 mil between the 2 plans. The basic plan is 1x but the supp plan can be 1x - 8x so it is very possible that the basic will not hit the limit, but the supp will.
I tried to set the combined limit of 3,000,000 for the 2 plans using the 2 pieces of the combined limits config, but I've tried everything, and it does not cut them back.
Can anyone tell me step by step how to configure this, or do I need to enable and develop a user exit?
Thanks!
Lisa

Hi, Lisa
This should not be a problem.
Firstly, have you set the Basic plan as a corequisite for your optional plan?
Benefits--> Flexible Administration -->Prerequisites and Corequisites --> Define Corequisite Plans;
Choose your secondary plan from the drop-down; then define your primary plan as the corequisite. In most instances, selecting the 'Any plan required' radio button should to the trick.
Now for the combined limits:
This is a 2-step process.
1: Define Combined Coverage Limits.
Choose your Optional life plan, and enter the following: Limit Amount -- 3,000,000; Rel. Operator : >=
REPEAT FOR BASIC PLAN AS WELL!!!!
When you save this, your resulting screen should read something like this : OPTL Optional Life Limit 3,000,000 0.000 >=
2:Define Combined Coverage Limit Expressions
Select your Optional life plan.
Enter the following in the table:
1.00 | Basic Life Plan
1.00 | Optional Life Plan
Again, do the same for the Basic plan.
the combination of these two steps creates the following equation:
3,000,000 >= 1* Basic Life + 1* Optional Life.
Feel free to ping me if you have questions. Contact details are on my business card.
Rob
Select your Optional life plan

Benefit - Question on EOI configuration for Insurance plan

I have a question related to Evidence of Insurability under Insurance Plan.
The requirment is that when an EE enrolls into an Insurance plan within 30days of DOH then EE doesn't need to provide EOI otherwise if EE enrolls into the plan after 30days then its mandatory to provide EOI. Could you please help me on how to set this condition when configuring EOI?
Thanks,
Raj.

Hi DF, Thanks for the comment.
Actually the requirement is, the EOI to be provided by EE is determined by DOH. Under garce period it determines the period when the EE should return EOI.
In our case, the EE don't have the provide EOI when they enroll within 30 days of DOH and they must provide if they enroll after 30days.

Benefit Salary for Insurance Plan

Hi Experts,
I need your help. I have a requirement to show the benefit salary in PA30 till the end of the month when an employee is terminated on any day of the month. Currently, the benefit salary in Insurance Coverage tab in PA30 is getting dispalyed only till the termination date of the employee but I need this to be extended till the end of the month. For example, if an employe is terminated on 4th of April, the benefit salary on 30th of april should be same as it is on 4th of april. But currently, if I change the calculation date in PA30 from 4th to 30th of month (or any other date after 4th), the benefit salary becomes zero. When I debugged, I found out that the FM 'HR_BEN_GET_PLAN_SALARY' is reading IT0000 and if the employment status(PA0000-stat2 = 0) is withdrawn, it is returning zero as benefit salary. Could any one please advise how to handle this so that I can extend the salary till the end of the month? Any help is greatly appreciated. Thanks so much in advance.

Hi Raj,
You should create a termination rule and attach it to the plan. You need do the following...
>>> Go to "Flexible Administration" under benefits - go to "Participation Termination"
1. Define termination groupings - You need to do this if the termination rules are different for different employee groups.
E.g. PT employees may be terminated immediately from the plan but FT employees till end of the month.
2. You define termination variants - these will be based on how many different possiblities you have. E.g. Immediate, End of the month...
so after 1 & 2 - you will have term groupings FTEE and PTEE and you will have two variants IMMD, EOM (end of month)
3. Here you will define the actual rules for the combination of grouping and variant - this is where you actually define what is the rule....
so here you can say EMO/FTEE - here enter 31 of day of the month - to take care of of your requirement. Hope this helps.
Cheers,
MK

How to select Dependants in IT0167 for Benefits Coverage of Health Plan

Hi
How to add Employee's dependents in IT0167 for Health Plan Benefits Coverage? Are there any specific configuration steps to be included: I have configured the below
Define Options for Health Plan: EMPL (Employee only) & EMFL (Employee+Family)
Define Dependant Coverage Options: EE (Employee only) & EEF (EmployeeFamily)
Define Min & Max No of Dependants: Coverage option EE+F
1 Spouse 1 1
2 Child 1 8
All the other activities in SPRO are completed - but when I trying to enroll employees with Family coverage, I am not able to see the Dependants information in IT0167 in Depents Tab
Please help me to fix this
Regards

Hi,
Please check if you have configured the below nodes:
Benefits
Flexible Administration
Dependent/Beneficiary Eligibility
-Define Family Member Groupings
- Define Dependent Eligibility Rule Variants
- Define Dependent Eligibility Rules
- Assign Eligibility Rule Variant to Plan
Hope this helps.
Regards,
Anand Jalan

Fraudulent insurance plan

I went into verizon in August 2012 since the mi-fi was not working . I has originally gotten it in Jan 2011. I was told I needed to update. I decided to update my phone at the same time. The rep stated that they now had an insurance plan that you pay a one-time rate of 129.00 and if you don't use it in a 12 month period verizon will reimburse your money and give you 50% of what your old phone or device toward a new device. so OK I get the insurance plan on both the new phone and the mi-fi. So first my new phone dies, just goes black while I am on a call , wont turn on or off, nothing. I take it in on a Friday morning, after working all night Thursday. It takes about an hour on the phone at the store to be told that they will overnight a refurbished phone to me. Thank god the rep at the store sent me with a little loaner phone because it was 4 days until the other phone arrived, I sent the unfunctioning phone back to them the same day. I was sent notice after notice for about 3 months to send the phone back, If I hadn't already. Then my mi-fi quits charging at home. so I unplug it and take it in to the store, tell them it is not charging, they plug it in and it comes on, then when they go to unplug it the little metal sheath comes out, so they call the warranty department since it has been less than a year, they state it is not covered because it is physical damage, even though it never did that at home, just in the store was the first time. so they call another department and they tell me it will be $100 to file a claim. So why did I get the $129.00 insurance plan? I walked out of the store without doing anything so now I pay for a large 10GB mi-fi plan every month and can't even get mi-fi. I am so discussed with verizon that I am on the verge of going with a complete different company. I am not at all happy with the insurance plan. I feel it is false advertising.

If I had to make a quess, the $129 charge was if the unit failed due to a manufacturer defect, not something they are calling a user caused problem. What was the name of the place that you went to? There are a lot of "Authorized Verizon Reseller" stores that look pretty much like Verizon stores themselves...

New iPhone User... Does AT&T offer insurance plan??

Just changed my carrier to freaken AT&T and was wondering if they have an insurance plan? Do you know how much it is? At verizon i think it was like 7 bucks a month.

There is no insurance available through AT&T for iPhone (apparently soon there will be). You can purchase the Apple Care Protection Plan (through Apple), which will boost your service coverage from 90-day phone and 1 yr. technical support. To 2 full years on both. This covers hardware and software issues, but like most plans like this it does not cover water damage, or if you happen to drop your phone and crack the screen.
But it is great in case your buttons have issues, or your phone dies on you (had both happen)
I highly recommend getting the Apple Care Protection Plan.
Hope this helps,
Message was edited by: jokerman129

The Best Lost/Stolen Insurance Plan?

My carrier is ATT and I want to purchase insurance just in case of my new 5s being lost or stolen. I understand ATT uses Asurion to cover lost/stolen phones. However, I have read a number of complaints that they often substitute the phone for whatever is available. Like if I lose my 5s they may send me a 4s, 5c, or god-forbid some junky knockoff thing called Android. I will be keeping the 5s only one year until upgrading to the 2014 iPhone. Has anyone had any experience with Asurion and actually had them provide a different phone within one year of that iPhone's release?
Any help at all or even in general about Asurion or another company I could use would be very helpful! I love to handout answer points!

Really? The title of your post is:
The Best Lost/Stolen Insurance Plan?
So, how is the fact that some credit card companies have amazing (and free) lost/stolen coverage programs, have NOTHING to do with your 'original question'?
Everyone already knows it? Not really. A friend of mine works for a bank, and there are literally thousands upon thousands of customers that have no idea that their credit card company has that option.
Name a better option than 'Free, and guarantees the same device, or an upgrade if that device is no longer available, or the original purchase price if no upgrade exists'?
There isn't one. And if you knew of it, then why would you ask?

Need to delimit an insurance plan

Hello, I currently need to delimit a life insurance plan that is no longer in use. I am in the "Define Insurance Plan General Data" section of SPRO. When I choose the plan, and then the delimit button, a screen pops up asking for a date. But what happens with this date is that it becomes the start date of a new date range (i.e 10/01/2008-12/31/9999) for the plan, as if I made a change to the plan. This is not what I want. What am I doing wrong? Is there a more appropriate way to do this? Please advise. Thanks

It's showing a date range because going forward your plan is closed.
For example:
From your Beg date thru 10/13/2008 your plan is open and then
as of 10/14/2008 thru 12/31/9999 you still have the plan but the status is now closed.
Chris

I have the Insurance Plan..but old Phone (Samsung Saga I-770)

I've had insurance for 2 years. It looks like they don't even sell that model on the Verizon Website or store. It's been lost, will Verizon send me the exact same model or give me a choice for replacement?

terpsfan78 wrote:
Thx...My friend is giving me his old Palm Pre Plus. When I register that phone on the network, will my insurance plan cover that phone? Say in a few months I lose the phone. Will the insurance replace the Palm Pre Plus?
How does that work?
No, the insurance covers only the original phone. It will not cover the Palm Pre and will replace the original phone. At this point it would be more cost effective to drop the insurance and save the 6 or 7 dollars a month towards a new phone. You may also be eligible for an upgrade if you have had your current phone for 2 years....

Sap hcm insurance plan

Hi,
for the coverage varaint I have defined it as DESG & DEMA. Its coverage for single and married employee. Like if single employee died in the course of work, they will be compensate 20 times of their salary and as for married employees they will be compensate 30 times of their salary.
As for the cost variant, I make use of smoker/non-smoker whereby the premium paid is different.
Hence i have 4 cost variant for:
Single employee that smokes
Single employee that do not smokes
Married employees that smokes
Married employees that do not smokes
When assigning insurance plan attribues, under the coverage option, i cant use the same name but the problem is my single employee whether they smokes or not they will be compensate 20 times of their salary. How do I configure this?
Thanks:)

Hi YanZu,
Is there a particul;ar reason why you need to have 2 cost variant then for Single employee if they get the same thing whether the smoke or not?
I suppose in this case 3 variants will be enough, no?
best regards
Sarah

User exit for Invoice plan settlement

Hi
Can any tell me the user User exit for Invoice plan settlement to display PO# on the check?
All your efforts are appreciated.
Thanks

ref link below
http://www.easymarketplace.de/userexit.php
http://www.planetsap.com/userexit_main_page.htm

Regarding Email address - Userexit for VF02 transaction

Once you enter a VF02 transaction, If you goto header partners and double click on the partner number it would take you to the customer master data screen in which we have an option for Email address this is in Display mode my requirement demands to make it Visible so that the enduser would enter the email address which finally reflects in the printoutput.
I would like to know the correct exit for resolving this issue
Any suggestions are appreciated........................
Naveen.

Hi Naveen,
Check all Exits for VF02
Transaction Code - VF02                     Change Billing Document
Exit Name           Description
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
No of Exits:         10
Rewards if useful...............
Minal

Benefits userexit for insurance plans

Similar Messages

Maybe you are looking for