Benifites and time event

hi,(URGENT)
v.v.thanks to anji reddy for giving valuable coding and reward also.
please give me coding on 'benefits and time event' and some functional matrial also.
regard : mahesh
thanks in advance

Woody,
Check Schema TC00,
The daily work schedule is imported as follows to table TZP:
Time ID     Time        Duration
01          00.00                   Time outside working time
02          08.00                   Fill time
03          09.75                   Core time
04          12.00       0.75        Core time break
05          09.00       0.25        Fill time break
The time ID is used to control the assignment of time types to time
pairs (function TIMTP) using the Time Type Determination Table (T555Z).
The time pairs generated by function P2000 in table TIP are assigned
pair type "1", if the day type according to the personal work schedule
is blank or "0", and pair type "2" if the day type is "1".
All clock times are decimalized beforehand. If there is a substitution
with cost distribution on the day being evaluated, the appropriate split
indicator is set.
Hopefully this helps,
Regi

Similar Messages

Differences between Time ticket (CO11N) and Time Event (CO19)

Hi Guru
Could you please briefly explain differences in between Time ticket (CO11N) and Time Event (CO19) during Prd Ord confirmation?
I tried searching for relevant material but could not get any.
Please advise

Dear Lyonie,
In my understanding CO11N, is generally used to confirm the production execution at operation level or sub operation level or
normally for milestone operation confirmation.Automatic Goos movement can also be performed when this T Code is executed.
There is no track of exact setup start time,end time,execution start time and end time.
Using CO19,we can track the or post the exact or actual setup start time,setup end time,processing start time,end time for each
operation.
More related to Time Eevnt confirmation,
Time Event Confirmations
Every confirmed time event is assigned internally to a record type group:
Setup times are assigned to record type group 1.
Processing times are assigned to record type group 2.
Teardown times are assigned to record type group 3.
Each record type group can be assigned to one or more parameters in the standard value key for the work center (for example machine time). (See Customizing in Production ® Basic data ®Work center ® General data ® Standard value ® Define standard value key). The link between time event and parameter ensures that the calculated duration counts as an activity (for example, when calculating the actual costs of the operation.
The processing of an operation requires both machine time and labor time. The time event confirmation for the processing section of the operation can take effect on activity u2018machine timeu2019 and on u2018processing timeu2019, if you enter record type group u20182u2019 for the parameters u2018machineu2019 and u2018laboru2019 in the standard value key.
You can only confirm quantities when you confirm processing time events.
You can only confirm activities that cannot be assigned to a particular record type group (Set-up, processing, teardown) by using the time event u2018Variable activityu2019. The confirmed value is assigned to corresponding value in the standard value key parameters.
Regards
S Mangalraj

Daily workschedule and time events

Hi,
we have problem about time events day assignment on holidays. it is as below:
we have a daily workschedule 16:00 to 01:00 (on the next day). it is working well on normal days but when it is a holiday on the calendar the clock out time (01:00) is assigned to the current day and it is not paired to the clock in.
we use P01 as time event type. how I can do something to daily workschedule be prior to holiday calnedar in day assignemt?
could any one help me on fixing this problem?
Regards,
Elnoosh

Hi,
there was a long break for this discussion,
I tried my solution for this problem but there was big bang after running final time evaluation for payroll payment
my solution:
1- I tried Mr. Omid's hint and changed "day type rule" to 02 and
2- regenerated my workschedule then holidays day type was 0 for this workschedule
3- I put a rule after function p2011 as below
time evaluation worked properly and every thing seems ok when I run it individually but it seems that when it was run finally by our time administrator every thing is mixed up and the holiday is counted as absence for some employees. I don't know what happened, now I rolled every thing back and again we have problem for holidays.

Restriction in event reported date and time

Dear All,
            We have a requirement where we want to keep check on all the reported events such that none of the events are reported with future date and time.
          We have some 25 reporting events and we have an option to keep the check in Preprocessing FM but then i have to add the customizing of each of the reported events.
Do we have any possibility to keep a validation via customizing on Actual Reported Date and time event to be within current date and time i.e. no future event is possible without using preprocessing functionality.
Thanks,
Shubh.

Dear Steffen,
                   Thanks for your reply but what i meant to ask is as below :
                   For an event which I am reporting , I have actual date and time as a field. In this field user can enter any date and time and this will be treated as reported date and time for that event.
   What I need is the restriction that none of the reported date and time is in future from the time when user is actually reporting the event. I am not considering planned date and time as the criteria for restriction.
Thanks,
Shubh.

When I try to adjust the date and time of an event by selecting Photos from iPhoto, the year I enter is altered.

I have images in iPhoto from an older digital camera which did not record the date and time. In iPhoto, with an event selected, I have tried to adjust the date and time by choosing Photo. When I adjust the date and check Modify original files, it makes the date much earlier--in centuries. I now have an event from August 2003 (the date I entered) which reads June 2, 1251 under the event! When I attempt to correct it, it goes back further in time. What am I doing wrong?

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

Why do some events show date and time in ical?

Some events show the date and time, others show only the time. I cannot find a setting in preferences to have it be one way or another. I do enter events both on the computer and also my iphone 4s, but that doesn't seem to be the difference.

oz81dog wrote:
Does anyone have any clues for me?
Look in Window menu > Previous Recipients

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Adjust Date and time for all Photos in an event?

Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

Entourage Calendar Events: Dates and times are not being saved accurately

After an event has been created and saved, the date and time will change pushing the event forward, but not consistently. Some events jump forward a few hours others an entire day or more. I've been using this program for many years without fault but this problem started several days ago after a recent automated software update. It is not only happening with newly created events, it has also altered events saved weeks ago! (note: time zone is set accurately in the System Preferences and Entourage)

I would check Microsoft's Entourage 2004 forum to see if others have experienced the same issue. Entourage 2004 has been replaced with Entourage 2008 awhile back. It may be those issues are fixed with 2008 and will never be in 2004, or you may need a later patch for 2004. If the automated software update was Microsoft's I'd contact Microsoft, if it was Apple's, this may just be a sign you need to upgrade your Microsoft to keep up with Apple. Whenever you do a system level software update you always need to verify compatibility bugs don't exist with the newer system when you are talking about other third party software. There are way too many third party software titles out there new and old for Apple to test with its own system given the time frame people desire updates.

How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

How can I see Date and Time of an event in iMovie 10.0.4?
Thank you for your answer.
greetings from Switzerland

Managing Profiles
http://support.mozilla.com/en-US/kb/Managing-profiles

Using + and - keys to change dates and times; Find and Replace event

Hi all, \
I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

Don,
...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
;~)

Calendar List mode not showing correct event days and times

I am currently using Exchange server to sync my calendar events to google apps. All my calendar entries are correctly syncing to the iphone, but when I open List view, it shows all my entries on different days and times. Drilling down into an event, and it brings up the correct information. Switching to day or month, the events are displayed correctly.
I have reset my phone and this problem is still occurring.
Thanks for any advice.
r
Cant wait for multiple exchange servers!

I found the other thread discussing this at length:
http://discussions.apple.com/thread.jspa?threadID=2470805
Doesn't solve it for me, but that's where the discussion should be...

ICal events and time zone change

Has anyone scoped out what happens to iCal events when your MBP moves between time zones and automatically changes the date and time settings? In general, I'd like my calendar events to be fixed at the time in the time zone where they are supposed to occur, and not where the MBP is, but of course I'd like the MBP to be telling me the time where it actually is. I don't think iCal does it this way, but I'm not sure how it handles time differences. Anybody know?

In iCal preferences, there is a check box for "turn on time zone support." If you leave it unchecked, iCal will automatically adjust to your current time zone and move the events forward/back by the appropriate number of hours. If you check "turn on time zone support" a drop-down menu will appear at the upper right of the iCal page allowing you to select the time zone you wish to view. In this mode, iCal does not automatically move the events unless you select a new time zone manually. Does that make sense?

Create quick event fails to recognize date and time

When I use "Create Quick Event" and enter "June 29 9am debate", iCal creates an event today, now, named "June 29 9am debate". I have tried different variations like "29th of June at 9am" etc. but all failed - I always get an event today, now.
I am pretty sure Create Quick Event used to extract date and time from the box: it created an event named "Debate" on the date of June 29, starting at 9am, lasting one hour - what could be the reason it doesn't work any longer? And more importantly, how could I get back the old behavior?
Thanks!

It is not prerly connected to the network
Make sure location is set correctly
DNS should be set to auto (settings - general - network)
If on wifi try ethernet
Ensure rputer has port 123 open (refer to manual if unsure)

Manipulating imports or photos events dates and times

It's a simple question and obviously related to the subject, but I'm trying to find out if it is possible to manipulate imports of images from an I device, we have an Apple Mac that has images on spreading over 3years, obviously with the event dates and times logged, but between each of the photos there are thousands of other images, therefore I would like to know if it is possible to slip images into iPhoto between these thousands of images and alter the date and time of the import or image
plus is there any way I can bring import logs up within iPhoto?

iPhoto has two ways to change the date of photos.
From the Photos menu select "Adjust Date and time". That will let you shift the dates of all selected photos by a fixed amount.
Or use "Photos > Batch Change". This way you can set the date of photos to a fixed date and time, with a optional increment between the photos. This is very useful for scans, where no capture date has been recorded.
To change the dates of events, change the date of the photos inside, or split the events, if you want to insert a different event in between. You can split an event by sorting the photos according to date and selecting a photo in the event. Then use the command "Events > Split event".

Benifites and time event

Similar Messages

Maybe you are looking for