Benifits with BW over R/3--reporting
Hi,
i would like to know that what are the major benifits of reporting with BW over R/3?
it is very helpful if you send me some links or material to my mail ID;
[email protected]
thanks,
jeo
Hi Joe,
Check your in box , had sent some PPts to you.And also check the following links
with http://help.sap.com/Support Guide Reporting (http://service.sap.com/REPORTWRITER-old-old)
...-old-old Support Guide Reporting
SAP INFO (http://service.sap.com/sapinfo)
... strategy, technology, in practice reports/ customer reports, Topic: SAP INFO
hi guru's
Information needed
http://www.itbusinessedge.com/item/?ci=19826
Thanks,
Hari.A
Similar Messages
-
I have been trying to export a keynote powerpoint with voice over to quick time. It keeps crashing. Can anything be done?
Can you explain this better, there appears to be a strange work flow going on, have you imported PowerPoint into Keynote or you are trying to export to PowerPoint?
There are many users who have trouble with a recorded voice over going to Quicktime.
Try this repair, its sorted out many similar problems in the past.
Complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to do this, its freeware
2 restart the Mac; Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped. -
Problem with voicer over on IMAC
hello , I have some troubles with Voice over on my IMAC. I am blind and this function is really important for me. I use it for many applications, but my bank had currently changed the graphic of the website, voice over fails to interact with images and so i could not do operations. someone can help me?
I am having problems with my Intel iMac's Firewire 800 as well. I have two WD drives daisychained on the 800 port. After 6 months with no problems, and a few weeks after updating to Snow Leopard the second drive intermittently stopped mounting after sleep. The devices attached to the 400 port were OK. It got worse over a few weeks, and after over an hour on the phone to Apple support and multiple tests (eg linking two computers using target mode), the tech said it was an 800 port hardware problem. My iMac is just back from having the logic board replaced (200 km round trip!!), and it has happened again - the second drive "was not ejected properly" after waking from sleep and has not mounted. WD refuse to support daisychained devices, though I don't think the drives are faulty because I can get them to mount using USB. So, you could have a hardware problem, but it may be a Snow Leopard compatibility problem if you have recently updated - other discussion topics have reported similar problems with firewire drives after updating to Snow Leopard.
-
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
Iphone 5s black screen with Voice Over On
I turned on Voice Over on my iphone 5s and it started to repeat everything, so I had to punch 2 or 3 times some commands in order to go back and suddenly my screen blacked out. I have tried to restart the iPhone and can see the silver apple, but again I can hear the commands (I can still hear all the commands (Voice Over On, Screen Curtain On, 8:45, Screen Locked) but can’t see anything on the screen. Please help!
Hello promomap,
Thank you for the details of the issue you are experiencing with Voice Over. Try turning off the Screen Curtain by triple tapping the screen with three fingers.
Additionally, you can turn Voice Over off completely using these steps:
Press the home button three times quickly. This is also called "Triple-click Home".
If the VoiceOver feature still is on, you can navigate to Settings > General > Accessibility and turn VoiceOver off here.
If it is too difficult to access those settings on your iPhone, you can turn VoiceOver off using iTunes:
Managing accessibility features using iTunes
Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
In iTunes, select your device.
From the Summary pane, click Configure Universal Access in the Options section at the bottom.
Select the feature you would like to use and click OK.
You can find the full article here:
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Issue with Variable Personalisation in Bex Report
Hi Gurus,
I'm facing a typical problem with Variable presonalisation in the Report.
I've executed a BEX Report and filtered data on some characteristics and used SAVE AS Button on the Portal to save the resultset. When I'm trying to use the variants, again say after 2 or 3 days i couldn't find updated data for particular variants upon using the same variants rather its refelecting the old data. Further more when I execute the report and try filtering on the same criteria altogether, I'm able to see updated result set.
Is there any setting to be enabled when we personalise variants or variants are dependent on the data or the date on which they are created. Not sure why the reports are behaving this way. Or Do I need to create variants time and again.
Any pointers would be of great help.
Regard,
YaseenHello,
In the BEx report, when you get the variable selection screen there input your selection and at the bottom you have the option of saving them as a variant.
Now in future when you run the report simply use this variant and execute the report. It should work fine.
Also remember date selection can be tricky. If you input todays date in the variant, it wil consider the same date in further references. So do a check on that too.
Regards,
Shashank -
Issue with Varchar2 field conversion for report output generated in EXCEL
Hello All,
I have an unique problem with one of my new reports for the User. The user wants the report output generated in excel data only(delimited data) format *(reports builder 10g)* .
Everything was fine until i encountered this problem, there was this field which has unique ID's(alphanumeric and numeric), when i tried to run the report and generate output in Excel the numeric ID's say for example *(41593497999679354429)* is converted in excel and displayed like *(2.5881E+19)* and after format cells in excel it displays *(41593497999679300000).*
The issue is only with 20 digits numeric ID's , if i append any special character to the end say '#' or '..' it shows the exact value along with the appended character. But the user insist they need only the value that is in the table. I am finding it hard to figure out, if any one of you have encountered the same issue or if any of you have any suggestions to overcome this excel conversion thing please do advice me.
Thanks in advance :)Thanks for you response, but i already tried what you suggested, instead of appending single quote in front of ID, i did at the end prior with '#', it preserves the value if i add any character to the id but the appended value shows up too :(.
Well, i just got the solution and it did work, thanks to [Brian Hill|https://forums.oracle.com/forums/thread.jspa?threadID=651632] for the post, i did what exactly he said and it worked. I was so very happy and wanted to share with everyone. -
I have a MacBook Pro with OS X Yosemit. MY safari will not open, it only comes up with a safari quit unexpectedly report. A new helper app appeared requesting my system password to download the helper. Stupidly I input the password, when I log off I can see the download icon for a split second still running asking to abort or continue. How do I sort this?
cheersGenieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
Select your preferred search engine.
4. Safari > Preferences > General > Homepage:
Set your Homepage. -
Error With Export/Print from Crystal Report Viewer
Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" EnableDatabaseLogonPrompt="False"
BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
public partial class Reports : System.Web.UI.Page
protected override void OnInit(EventArgs e)
base.OnInit(e);
if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
if (reportService != null)
string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
+ "Where SI_PROGID='CrystalEnterprise.Report' "
+ "And SI_ID = {0} "
+ "And SI_INSTANCE = 0", Request.QueryString["rId"]);
InfoObjects infoObjects = infoStore.Query(queryString);
ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
if (infoObjects != null && infoObjects.Count > 0)
ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
//Viewer options
// Don't enable prompting for Live and Custom
CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
protected void Page_Load(object sender, EventArgs e)
if (IsPostBack && CrystalReportViewer1.ReportSource == null)
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
private bool AssignReportParameters(ISCDReportClientDocument reportSource)
bool success = true;
if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
if (Request.QueryString["t"] == "2")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
else if (Request.QueryString["t"] == "3")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
else
//Unknown report type alert
success = false;
return success;Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice, -
Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.
Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.
-
Hello!
I'm using InDesign CS6.
I'v finished now a layout for a folder, and I put a photoshop-image with transparency over a InDesign-rectangle which I have filled with a cmyk-color in yellow.
When I export a PDF with the Settings "PDF X-3:2002" (with PDF-Standard 1.3) the Photoshop-image shows uggley jagged edges at the border to the InDesign-colored background. However, the Photoshop-images which are over another bitmap-image (as background), this images don't show this annoying edges.
When I export to PDF-Standard 1.4 the problem doesn't occor, however my printing-service requests PDF 1.3.
I know, the workaround for this problem is, to replace the yellow background-color with an bitmap-file with the same color, but is there any other option to get a correct result without this more time-consuming image trick?
I think it has to do with the transparency reduction which is necessary if using PDF 1.3. When I examine the PDF-File in Illustrator, this edges occurs mostly at the borders from the tiles in which the image is cut during the transparency reduction process. Although, if I open the rendered PDF in Photoshop this jagged edeges are visible, so it is definitly a render error.
I would be glad if someone of you has a solution for this problem, in the attachment is an image which illustrate the problem.
Best wishesFind another printer.
End of problem. It really saddens me to think that these Luddites are
still in business making no effort to move into the 21st century.
Bob -
Problem with PDF extract in a report
Hi guys,
We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
Export excel works fine for all cases.
I am assuming it has got something to do with the way the system handles the cache for PDF export.
I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening the report for the first time the query does not get executed automatically.
Any help on this would be highly appreciated.
Thanks and Regards,
immanuelHi Immanuel,
Have you tried clearing the cache? My guess is, it is probably a defect.
Regards,
Vikram -
I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?
dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter -
KE24 Report comparison with FI GL account balance report
Hi Friends,
I'm comparing KE24 transaction code COPA actual line item balance with FI GL account balance report, but I'm not able to match it/not sure how to match it.
Could you please let me know how to compare these two reports mainly to know whether all the balances in FI are moving to COPA properly. Also please let me know how the values are being extracted for this KE24 transaction code.
Thanks & Regards,
DwarakThis comparison can only be done with a thorough knowledge of the config that was made to transfer information into the COPA system. It is COMPLETELY implementation specific. It generally is grouped into several areas - Revenue, Cost of goods sold @standard, cost of goods sold period based adjustments (E.g. variances) and overheads.
Here is some VERY broad guidelines:
Revenue method will depend on whether you are using "vanilla" sales of inventory from SD, or whether you use resource related billing in PS. Further you will need to know which condition types post to which GL Accounts, and to which value fields.
Cogs method will depend on the sames differences, also whether you are using material master price (VPRS), or whether you are using standard cost estimate. If you are using standard cost estimate, you need to know the cost components used, and which value fields they post to.You also need to know which GL account(s) is posted to. This is based on the valuation class in table 30. Alternatively, for resource related billing you have to know how the DIP profile was set up.
You need to know how your production variances are posted, your purchase price variances and your overhead variances on production cost centres.
Overheads can be posted directly from FI, from MM, or settled from an internal order or project. Alternatively, they are assessed from cost centres, to PA using assessment rules.
You also need to know whether there are any statistical value fields, which should be excluded from the reconciliation.
Maybe you are looking for
-
Memory density clarification!!!
I started another thread on this, but the update to that thread is big enough to have its own thread. However, for the history the link to that thread is https://forum-en.msi.com/index.php?topic=127102. In a nutshell in that thread I wanted to know i
-
ITunes 10.6.3 Update Error
I have been offered the iTunes 10.6.3 on my Windows computer but every time I press the "Download iTunes" button, nothing happens. I know that many other people have been having the same problem. Does anyone seem to have a solution to this problem? W
-
Fix a data value in a field (to be by default)
Dear all, Does anyone knows how can I fix a data value in a field, i.e, to be by default when I first execute a transaction? Another thing, in version ECC 6.0, can I export a excel document directly without using the option "save as"? My user just wa
-
Applications are logging me out when Javascript files are called
Hey Guys, I am using APEX 3.1.2 and am using LDAP as my Authentication scheme for my application. SSL is also activated on the environment my applications run on. I can log in using the login page (page 101) and I can use my application perfectly. Ho
-
Can the Metadata Browser be extended?
I am thinking of filtering according to 'Focal Length' or 'ISO Speed Rating' or eventually the aperture f-value (if only this were not shown together with the exposure time in 'Exposure'). Thanks Stefano