BenQ XL2420T 120 HZ / 3D Ready - May I use this with my iMac?

Hi.
My Philips 190B monitor that I have been using with my iMac in Extended Desktop mode recently died so I'm looking for a replacement second monitor.
I also own a PS3. Well, actually I own two. One is sick at the moment.
I would like to replace the Philips with the new BenQ XL2420T monitor. Use it with my iMac as I did with the Philips (possibly for gaming too) and use it with one, or both, of my PS3s for gaming and 3D Blue Ray movies via HDMI. Thinking forward I am likely to get into 3D gaming too.
The BenQ has a 120Hz refresh rate and I wonder if the ATI Radeon HD2600 in my Mac can handle this? It's late 2007 vintage.
Or with the BenQ XL2420T monitor am I being too ambitious?
My Philips is currently connected to my iMac using DVI -D by means of an adapter.
Message was edited by: El Deanio

lottathings1 wrote:
BenQ just intro'd a couple of new monitors with a macbook mode to match mac color space. you might check those out as a 2nd monitor for your imac - they're 1080P and have hdmi input, they're white too.
more info is on the Benq US blog at http://info.benq.us/blog/bid/231596/BenQ-s-New-White-Monitors-Offer-Choice-Style -and-Mac-Compatibility
W.
Looks rather nice to be sure. It's got DVI-D so it ought to work with my iMac without a problem. My current monitor is (was) connected this way by means of a small adapter.
BenQ say it has it has HDMI 1.4 so it can work with consoles. Doesn't say 3D though, so I assume that is a 'no'. Strange that 3D should be omitted when all the consoles can handle this.
In fact I have just downloaded the extra info from BenQ ad the spec looks reallly impressive. I assume that D-Sub is what they call VGA now. I need VGA in case I ever bring my old PowerMac 6500/300 out of mothballs. Yes, the white Benq looks like a great second monitor for my iMac. I'm virtually certain now that it doesn't have 3D but now I'm not so sure about the desirability of having that facility. I'm intrigued by what they say about the 'Reading Mode'.
Thanks for the heads up, lottathings1. Really given me something to think about. LOL!

Similar Messages

May I use Builder with older Flash files

That sums it up. Its a very simple question. I have used older versions of Flash to build many Flash files. I'm needing to redo my software and am wondering if Flash bulider, which is a good bit less coslty, to work with, modify, and add to my older files? Can I build new Flash files with the same functionality? Or..can I import older Flash files into builder and go from there?
This should be simple, and I appreciate your help. Thanks in advance.

So I glanced at the source. Note that you are using the
AC_RunActiveContent script to embed your swf.
So I tried to go to that script at:
http://www.christykarpinski.com/Scripts/AC_RunActiveContent.js
(The src of the script on the page is
"../../Scripts/AC_RunActiveContent.js" and the page is in: "
http://www.christykarpinski.com/videos/pages")
I got a 404 on the script. Double check that
http://www.christykarpinski.com/Scripts/AC_RunActiveContent.js
is the actual path where the file is located on your server.

May i use the session bean in the jsp

<%@ page import="sms.EJB.*,sms.UserDetailEJB.*" %>
<%
if (request.getParameter("userid")!=null && request.getParameter("password") !=null && request.getParameter("userLevel")!=null)
UserHome userHome look up...
UserLocal userLocal;
userLocal = userHome.create(userid,password,userlevel);
%>
<html>
     <head>
          <title>Insert One Page</title>
     </head>
     <body>
     <form action="/testing/insertOne.jsp">
          <h1 align="center">Insert into User Database !</h1>
          <table align="center">
               <tr>
                    <td bgcolor ="#FFFCCC">User Name :</td>
                    <td bgcolor ="#FFFCCC"><input type="text" name="userName" size="12" maxlength="12"></td>
               </tr>
               <tr>
                    <td bgcolor ="#FFFCCC">Password :</td>
                    <td bgcolor ="#FFFCCC"><input type="password" name="password" size="12" maxlength="12"></td>
               </tr>
               <tr>
                    <td bgcolor ="#FFFCCC">User Level :</td>
                    <td bgcolor ="#FFFCCC"><input type="text" name="userLevel" size="12" maxlength="12"></td>
               </tr>
          </table>
          <p align="center"><input type="submit" name="submit" value="add it"</p>
     </form>
     </body>
</html>
May i use the session bean like this, if i dont want to use the data access object
may i use this...

Hey it apperars to me like heero82 is using session facade and all he has to do is use session bean to make one business call on session bean. Now if u say it is not correct then i would like to know the better way to doing so.
I can imagine one ways is use business delegate. Just make new of java class in jsp and let that java class do lookup and delegate the call to session facade.
Let me know inpout on this
pranav

May I use the ESMTPA id trace to Messaging Server user

My Messaging Server is iPlanet Messaging Server 5.2 HotFix 1.21.
I have a trouble
If i reecive a mail header Like
" Received: from tailed ([abc.abc.abc.abc])
by xxx.xxx.xxx.xxx (iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)) with ESMTPA id <[email protected]> for dunn@ ***.net;
Wed, 27 Oct 2004 15:35:17 +0800 (CST) "
Q1:
In Messaging Server , May I use this ESMTPA id trace which one send this mail by my Messaging Server ?
what kinds of Messaging Server Command-line I can use or logs I can check ?
TKS!

bec I received a message to my abuse mail and the message mean
" It looks like spam, unsolicited bulk e-mail. Could you encourage him/her/it to
cut it out?
---spam follows---
Return-Path: <[email protected]>
Received: from tailed ([abc.abc.abc.abc])
by xxx.xxx.xxx.xxx (iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)) with ESMTPA id <[email protected]> for dunn@ ***.net;
Wed, 27 Oct 2004 15:35:17 +0800 (CST)
May I use this ESMTPA id trace which one send this mail by my Messaging Server ?
what kinds of Messaging Server Command-line I can use or logs I can check ?
And find which account to spread spam mail ?

A stale Connection Factory or Connection Handle may be used in SOA 11g

Hi all,
I am working on a outbound process from oracle apps to BPEL. I am using SOA 11.1.1.3 version. I have created connection pool in admin server.
But BPEL does not pick the messages from ecx_outqueue present in apps.
Also when i update the Aqadapter in the admin server i get the following message
Selected Deployments were updated.
You must also activate the pending changes to commit this, and other updates, to the active system.
The soa diagonostic log is provided below
[2011-02-14T02:29:21.248-07:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ohsadmin] [ecid: 004b3eilKBAE4UVQu2q2TH0006H0000Fay,1:30378] [APP: soa-infra] [dcid: 49c8ed318246db94:41013faa:12d7ab8287f:-7fff-0000000000002a49] [URI: /em/faces/ai/soa/composite] JCABinding=> Invoice_OracleApps *Error while performing endpoint Activation: javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/AQ/ExtEBizConn_Factory from JNDI and get a new Connection Handle.*
[2011-02-14T02:29:21.248-07:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ohsadmin] [ecid: 004b3eilKBAE4UVQu2q2TH0006H0000Fay,1:30378] [APP: soa-infra] [dcid: 49c8ed318246db94:41013faa:12d7ab8287f:-7fff-0000000000002a49] [URI: /em/faces/ai/soa/composite] JCABinding=> Invoice_OracleApps [[
javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/AQ/ExtEBizConn_Factory from JNDI and get a new Connection Handle.
Can anyone provide some inputs on this?

Hi Anuj,
I have followed the following steps mentioned in the metalink ID 1235943.1 but still it is throwing the same error.
1.Log on to your Admin console and navigate to Domain -> Deployments -> <adapter name> -> Configuration Tab -> Outbound Connection Pools Tab -> Under Groups and Instances expand the javax.resource.cci.ConnectionFactory
2.Locate and select the adapter JNDI and click on the Connection Pool Tab.
3.Please check to see if Shrinking is enabled. If not, please enable it.
4.Please check the value for Shrink Frequency Seconds. The default for some connection pools is as high as 900 seconds. Please reset this to 120 seconds or less.
5.Activate your changes.
6.If this does not improve the situation, please also try increasing the max size of your connection pool.
Please advice if any other solution is there.
Thanks,
Dhiraj Mishra

"Your app is being created but it isn't ready to be used yet." Access Services error

Hi All,
I have configured my environment to be able to create custome Access Apps by using this guide:
http://blogs.msdn.com/b/kaevans/archive/2013/07/14/access-services-2013-setup-for-an-on-premises-installation.aspx
I have followed everything to the letter (except the "Configure for Apps" optional section as I had already done this).
However whenever I try to create a new Access App I get the "Your app is being created but it isn't ready to be used yet." message and if I browse to the site contents of the url I am targeting it shows the app as installing but it will never complete.
The logs don't give much more information than what is in the message displayed except the following entry:
MossPackageManager.InstallPackage: Timeout before installation completed for the SPApp '94d0d6b0-cfd7-4ab6-8c7e-403ea6db0231'. Elapsed time: '1' minutes
Is there anything that I may have missed/configured incorrectly?
Many thanks in advance :-)

Hi,
According to your post, my understanding is that you could not create the Access app.
Based on the log message, some service application may not be created well.
You should double check whether the following service applications had been created well.
Access Services
Access Database Service 2010
App Management Service
Microsoft SharePoint Foundation Subscription Settings Service
Secure Store Service
There is a similar thread for your reference.
http://social.msdn.microsoft.com/Forums/ie/en-US/18e8f749-3c1d-4d94-8e41-7226a8c2f904/error-creating-access-custom-web-app?forum=sharepointadmin
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

HT4436 I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 8

I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?

This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

I am a teacher with 7 iPads for my room with no VPP or Apple Configurator. May I use the same Apple ID for each of the devices with a separate password for each device?

Who can help me with the above question? Multiple iPads in one classroom: may I use the same Apple ID (which is my work email) for each iPad, and construct a separate password for each device? My school does not have VPP or Apple Configurator

Password to what, exactly? If you're referring to the screen lock, each iPad can have a separate passcode, since that's not tied to an Apple ID. If that's not what you mean, please post back and clarify what password you're referring to and what you wish to accomplish.
Regards.

How many computers may i use aperture on

hi
purchased a copy of aperture - I like many people have several computers - how many computers may I use my copy of aperture on? i.e. I plan to use it on one laptop and one desktop.

If you really wanted to access the same library on both laptop and desktop, you could keep the library on an external drive that you plug into one or the other.
For traveling, what I do is keep a more limited version of the library, with offline masters, on my laptop. If you were willing to give up enough disk space you could keep your whole library this way.
Or, you can just export projects and keep those on your laptops library by importing them. When on the road I create libraries on my laptop and then re-import them into the desktop library when I get home.

Can you create apps after 1st May 2015 using Adobe DPS single edition?

Can you create apps after 1st May 2015 using Adobe DPS single edition?
I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' - even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

I keep getting a display message saying this cable or accessory is not capitiable with this apple product may not be reliable with this iphone even when i have no cable or accessory in use

My iphone 5 has been saying this for days now. Yes I have recently purchased a motorola ear piece for easy talking while walking, but i have also used a 10ft cord purchased at walmart for months now and no display before the motorola. now even without anything plugged in ,I still get the display message on my phone saying" the cord or accessory is not capitable with this iphone and may not be reliable with this iphone.
what DO I do ?! is there something I can do without going to either Sprint or Apple for help.... will this be damaging to my iphone ?! HELP before its too late.
sincerely,
Apple lover JAJA

Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
CAUTION - This may get rid of the warning for now, but the issue the warning points out still remains. One or both of your cables is certainly suspect.

My iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do???

my iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do??? i leave in diferent country now!!!???(((

in many countries to make phones seem less expensive
carriers pay most of the phones price for the customer
but this come at the cost of the phone only being able to work
with the carrier this is called a sim lock
the only people who can remove a sim lock is the carrier which
the phone is sim locked to they been doing it like that for at least 20 years

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

BenQ XL2420T 120 HZ / 3D Ready - May I use this with my iMac?

Similar Messages

Maybe you are looking for