BES serverrole in hyper-v
can we use bes service in 2008r2 server in hyper-v
Yes you can use. Please check below link
http://docs.blackberry.com/en/admin/deliverables/25751/New_in_this_release_503_1311756_11.jsp
http://docs.blackberry.com/en/admin/deliverables/27945/BlackBerry_Enterprise_Server_Express_for_Microsoft_Exchange-Installation_and_Configuration_Guide--1530551-0411045427-001-5.0.3-US.pdf
Akshay Pate
Similar Messages
-
Bonjour,
Nous souhaitons paramétrer nos Blackberry Q10 pour qu'ils passent via BES.
Nous utilisons la solution BlackBerry® Business Cloud Services de Research In Motion (RIM®) via Office 365.
Nous ne savons pas quel nom de serveur il faut indiquer lors du paramétrage des Q10.
Voici pour plus d'infos la demande effectué chez microsoft :
http://community.office365.com/fr-fr/forums/248/t/191298.aspx
Merci d'avance pour votre aide.that looks like BES 5 and not BES 10 which will be needed
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Tour not deleting messages when deleted from BES/Outlook
I was hoping this annoying problem would go away when I upgraded from the World phone to the new Tour on Verizon. Not so much. It worked great after activating my BB with our corporate BES. Now a day later when I delete a message in Outlook, it will not automatically delete on the BB so I have to delete everything twice. I get all new messages syncronized on both, but deleting would be nice as well. Any clues? On the world phone, deleting would never work in both directions. i.e. delete on phone won't del in Outlook and vice versa. At least with the Tour it does seem to delete in Outlook if I delete on the phone but not the other way around. Thanks for the help.
PatrickIs it a hard delete in outlook? (aka Shift Delete)
If so look at this KB
http://www.blackberry.com/btsc/KB04863
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Bridge browser intranet bes issues
lets list here what we manage or do not manage to reach in the internal network from the bridge browser through the bes server and mds i.e. paired to a blackbefry smartphone ( not setting up a vpn through the normal browser through wifi )
i say this because it seems that you do not manage to reach evrything that you manage to reach through the ordinary bes blackberry smartphone.
eg. in our private network we have a bes and an exchange server and if i type http://myexchangeip/exchange/myusername/inbox on my blackberry smartphone i get a domain authentication request and if i provide the correct password i can access my exchange owa (outlook web access) mailbox view. if i type the same url on the playbook bridge browser i do not manage to access
although other internal urls work on both the smartphone and the playbook bridge browser
eg. bes5 webconsole url - nas webconsoles - hp printers web interfaces
i would have expected to see working also vnc servers java access, but doesn't
the only vnc server i managed to partially access is thinvnc a special web only version but this also only setting it to https with no authentication
i also have dell server management web consoles and hp ups power management web console that are on strange ports that do not work through the browser bridge
any ideas or better success?I can access my exchange server by IP, Sonicwall, APC 3000 web interface, most printers, IP switch and more.
are you accessing by IP or DNS name? try Ip and see if it is better.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Re: BES 5 Updating Device Software from 4.6 to 5.0
Can you comment on how I can download the actual 5.0 OS for a device? I have a Curve 8330 and it is listed as a compatible device for 5.0. I have installed software on my PC that checks for Updates and says NONE. I checked for updates via Options --> Wireless and says NONE. I'm on SPRINT and not sure if that matters, but for whatever reason the device shows as compatible, but I cannot seem to update.
Is there a way to simply download the OS file and install? I know you have great steps, but they don't seem to work for me, in that I'm at the mercy of the "Find updates" and its not showing OS 5.0
Any pointers would be greatly appreciated, thanks :-)
...Ryanworb68 wrote:
Ryan,
Use the link above - i had the same problem as you if you follow BES upgrade instructions.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
we need to do this globally - we are in London but have BES devices in NY, London, Paris, Amsterdam & India.
Whats the best way to upgrade these?
W.
I would send them the instruction I just sent. it worked reall well for me.
I would also suggest to stagger them to 30 or so per day as you will get a few calls and dont want them all on the same day unless you have the people to assist with it.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Does Blackberry Classic requires any BES?
Hello!
My company is using Blackberry Enterprise Service at the moment.
we want to stop using this server, due to the upgrade costs, but we would like to remain with blackberry devices and, mainly, to buy new blackberry classic devices.
Is it it mandatory to have the BES to access our e-mails of Microsoft Exchange server through the Blackberry Classic?
Or can it work like any Android and iOS device and access them directly (without the BES)?
All help is appreciated!
Thank you!You can use Active sync but you can only wipe whole device or get BES 12 whch can remove work side only.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Is RIM implementi​ng BES enterprise security on all Playbooks
Is it possible that RIM is implementing BES enterprise strict security on all Playbooks even though they are not on BES? It seems like a lot of things that normally should work are not working and these are the same type of things that Corporate BES implements (not being able to open certain type attachments, not being able to click certain links, etc.).
good info here
http://docs.blackberry.com/en/admin/deliverables/26992/BlackBerry_PlayBook-Security_Technical_Overvi...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
E90 fails BES activation, HELP!
Im having an issue where my e90 will fail the BES activation. Ive upgraded to the latest firmware (210.34.75) and am using "Nokia S60 BlackBerry Connect 4.0 vers. 8.14.1(.SISX, 2,89 MB)" from the Nokia website. The conformation email gets sent to the hand held as well.
I have deleted and re added my user from the BES several times but I always get the "your account is not authorized for Enterprise Activation. Contact your IT Administrator." Message. The password is accepted but It will always fail. any help will be appreciated. I will post more as I try other scenarios. Thanks.
P.S I know the E90 at least passes the password verification because when I set a blank password on the BES the E90 will give a password error.
Dave Mills
Sr. Mobile Support Technician, BES Admin
Wyndham Vacation Ownership
"In the parlance of our times."Do you have a BlackBerry data plan?
With out one you will only see BES activation in email setup.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Hi i just brought this blackberry storm 2 on eBay and it has BES and I would like to change it to BIS. I tried using the policy bin but my blackberry desktop manager 6 is constantly on BES and I don't know how to change it. All I have is the pin and the BES says it is not activated. Can anyone help?
the carrier has to do this, they have to add in the more expensive BES plan.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Application running slowly under Hyper-V (factor of 100 times slower)
I have an application running in a non virtual Windows Server 2008R2/SP1 environment. It processes about 60,000 records from an indexed file (about 20MB in length) in about a second running in that environment. I want to move the application
to a Hyper-V virtual server also running Windows Server 2008R2/SP1. When I do so, the application runs, but processing the same file takes almost 2 minutes.
The application is the only thing running in the virtual machine and the virtual machine is the only VM running on the physical box. The VM is configured with a single processor, 2048M of fixed (not dynamic) memory and a fixed size disk of 255GB.
There is no network traffic so the single network connection is not used. The physical machine is a quad core with 8GB of memory and two 1TB drives that are less than 1/4 used in each case.
Now for the weird part. The application runs from the command line. If I start it and do nothing else, it takes about 2 minutes to complete its process. But, if I start the application, switch focus to another window on the virtual
machine then switch back, the process completes immediately upon switching back to the command line window.
Any thoughts?The VM is configured with a single processor - The physical machine is a quad core
Do you mean the physical machine that was running the application has a quad core processor? If not, what did the physical machine running the application actually have? Is the application multithreaded so that it can make use of multiple processors?
Did the application in the physical world have OS and data on the same disk or on different disks? Did you run this application shortly after you started the VM, or did you let the system quiesce a bit? Did you measure performance on the physical
under the same sort of conditions? Are you running from a cmd window or PowerShell? (Your comment about clicking away and coming back brings to mind things I've seen with PowerShell) Does it run quickly on a second instantiation, or does
it run poorly every instantiation?
Determining performance requires a lot more information than what you provided.
I always assign at least two virtual CPUs to any Windows Server VMs. There are enough system processes running on the box that two processors will almost always benefit the workload. Also, it it not uncommon that the first run of an application
shortly after a machine has started will never perform as it will after a machine has settled in. This is why every benchmark worth its salt will start the benchmark and let it run for a few minutes before they actually start measuring.
.:|:.:|:. tim -
How to get information about creation of a virtual machine on a Hyper-v host.
Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius ValiantFor Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:
-
Unable to WDS install Win 8.1 VM on Hyper-V 2012 R2
Hi.
We've recently gone from Server 2008 R2 (Data Center) to Windows 2012 R2 (Data Center) and we're now trying to install Windows 8.1 clients on our Hyper-V solution.
When using the virtual machine creation wizard I create two test machines.
One machine is a gen1 and one machine is gen2 both are set to install via network (MDT 2013) and both a given a 40GB disk and 4GB of ram. Both installations fail.
"Windows setup could not configure windows to run on this computer's hardware".
According to everything I've found on the web this could happen if you try and install Windows 7 - something to do with 4K disks I think. This shouldn't happen on Windows 8.x.
I've seen a few posts where they explain the IDE controller being unable to handle 4K disks so that might explain something but in my case I also have a gen2 machine where disk is attached to a SCSI controller.
As I understand it a server 2012 R2 with Hyper-V should be able to have a Windows 8.1 installed on a VHDX file on a SCSI controller.
Can anyone help out here?
Thank you!According to the web setup.exe /quiet /norestart should be valid parameters for the components.
What I mean by Applicaton Install is that there's a part of a Deployment Share where you can choose to install applications. A Task which will run at a appropriate time, e.g. Office is installed into our base image at that time. I tried including the Integration
Components before the Office install creating a base image with Office 2013 and the IC.
I also tried to use the base image a create a task for VMs only where no driver what so ever gets installed - it simply installs the base image created and activates Windows and nothing more. That doesn't work either.
The problem in a nutshell is this:
I want to install via MDT/WDS. I don't care if it's a regular machine or a virtual one. Both should work.
I've created several base images (Win7_x86, Win7_x64, Win8_x64 etc.) with Office included and everything has worked fine except when I try and install Windows 8 as a VM.
I must say that I've tweaked around and tried a few things while trying to find the problem so I probably have to test some things again to make sure what I say goes but we've installed both Win7 & Win8 on regular machines without problems but I can't
seem to install a Windows 8 machine via MDT/WDS for some reason as a VM - only on regular PCs.
As tested above installing via ISO works fine and creating a new image didn't help either.
The way I capture an OS is by simply write DoCapture=YES in my Deployment Share Rules section and boot into that Deployment Share (then I get a menu where I can choose to capture the machine and it simply installs the imported Windows ISO via a Standard
Client Task Sequence (where it also installs Office - there's an Application Install section part of the Standard Client Task Sequence).
So really really short; the image I try to install works fine on a regular PC but won't install on Hyper-V. -
Steps to compact a hyper-v VHD without bringing down live VM.
Hi all,
I have a hyper-v 2008 R2 hyper-v host with some VM's that are dynamic disks. Some of them have grown to the point where our backup is failing because its exceeding the capacity of the tape.
I know the general proper process to compact a VHD is to:
1. Defrag the VM
2. zero out empty space with a utility like sdelete or precompact.exe
3. compact within the VM manager edit disk or to use diskpart. (I think diskpart will be faster?)
Since these are live VM's I don't want to bring them down for too long. I was thinking I could take a of copy the VHD's and put them on another 2008 machine, Mount the VHD as a drive and perform the steps above. Then I would remove the old VHD on the production
server and copy over the compacted VHD.
What Im not sure about, is whether it is ok to run defrag and sdelete on the mounted VHD or whether its preferable to run that within the VM itself?
Secondly does the machine where I mount the VHD's need to be the same OS and have hyper-v installed? For example if I copied the VHD to a windows 7 machine and mounted for these steps would that cause a problem when I restore it back on the server 2008 hyper-v
server?
Lastly I see people who use a third party app to defrag. What benefit is there to using a third party utility (defragger etc) versus the built in defrag within windows? Does it even matter?Hi Guys,I wrote below script for creating new user and granting it read only access but I'm getting attached error.Please help...Powershell$HostList = Get-Content C:\Users\malvika\Desktop\Hostnames.txtforeach ($server in $HostList){ $HostDetail = $server.Split(',') $HostName = ($server -split ',')[0] $userid = ($server -split ',')[1] $password = ($server -split ',')[2] $VCimpl = Get-VIServer -Server $HostName -User $userid -Password $password [Reflection.Assembly]::LoadWithPartialName("vmware.vim") # The name of the role to be assigned $roleLabel="Read-Only" #craete user New-VMHostAccount -Id Test -Password U!er -Description "Test User" #The name of the principal (user or group) that the role is assigned to $principal="Test" # set to false if principal is a user , not a group $principalIsGroup = $false $propagateToSubEntities = $true ...
-
Hyper-V Server Manager -Error occurred during enumeration of Data Deduplication volumes
Hi Experts,
I having this problem in my Hyper-V Server Manager. Can somebody tell me why this happening? Inside my Hyper-V, I has been installed Microsoft DPM 2012 and both Hyper-V is cluster. Please advice.Hi Tyler,
I had the same problem until I unlocked (BitLocker) the HDD causing the error message. -
Unable to start guest OS in Hyper-V on Server 2012 R2
I get the following error trying to start any guest OS in Hyper-V Manager:
"An error occurred while attempting to start the selected virtual machine(s)::
'TestVM' failed to start.
Virtual Machine 'TestVM' could not be started because the hypervisor is not running.
'TestVM' failed to start. (Virtual machine ID xxxxxxxxxxxx)
Virtual machine 'TestVM' could not be started because the hypervisor is not running (Virtual machine ID xxxxxxxxxxxx).
The following actions may help you resolve the problem:
1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization.
2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then
turn it back on. Resetting the physical computer is not sufficient.)
2) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically."
Host (Physical) Hardware:
- Supermicro X9SRL-F, BIOS Rev 3.0a (current) with Intel Virtualization enabled and Execute Disable Bit enabled
supermicro.com/products/motherboard/Xeon/C600/X9SRL-F.cfm
- Intel Xeon E5-2620 CPU
http://ark.intel.com/products/64594/Intel-Xeon-Processor-E5-2620-15M-Cache-2_00-GHz-7_20-GTs-Intel-QPI
- 96GB ECC DDR3 RAM
Host Software:
- Server 2012 R2 DataCentre with update 1 (clean install)
- Hyper-V role installed
All hardware supports virtualization and was previously running VMWare VSphere 5.5 without problem.
The BIOS settings for Intel Virtualization and Execute Disable Bit are both enabled.
The server has been physically shutdown and powered off numerous times, but still doesn't work.
I've read Ben Armstrong's notes on setting the Hypervisor Launch type in BCDEdit
Here's the current Boot Configuration Data
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume8
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-US
inherit {globalsettings}
bootshutdowndisabled Yes
default {current}
resumeobject {06bff081-9477-11e4-ab74-9faf6fe9d444}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device partition=C:
path \Windows\system32\winload.efi
description Windows Server 2012 R2
locale en-US
inherit {bootloadersettings}
recoverysequence {06bff083-9477-11e4-ab74-9faf6fe9d444}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {06bff081-9477-11e4-ab74-9faf6fe9d444}
nx OptOut
hypervisorlaunchtype Auto
Here's my System Info:
OS Name Microsoft Windows Server 2012 R2 Datacenter
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HYPER1
System Manufacturer Supermicro
System Model X9SRL-F
System Type x64-based PC
System SKU To be filled by O.E.M.
Processor Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz, 2001 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 3.0a, 5/12/2013
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode UEFI
BaseBoard Manufacturer Supermicro
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Workstation
Secure Boot State Unsupported
PCR7 Configuration Not Available
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume8
Locale Australia
Hardware Abstraction Layer Version = "6.3.9600.17196"
User Name Not Available
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 96.0 GB
Total Physical Memory 96.0 GB
Available Physical Memory 93.0 GB
Total Virtual Memory 110 GB
Available Virtual Memory 107 GB
Page File Space 14.0 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
I do have the following two errors in the Hyper-V server role event log that occur at system startup, but can't find any info on it:
Log Name: System
Source: Microsoft-Windows-Hyper-V-Hypervisor
Date: 12/01/2015 3:35:37 PM
Event ID: 63
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPER1
Description:
Hypervisor launch failed; The hypervisor was unable to initialize successfully (phase 0x5), and was not started. This initialization failure may be the result of a platform configuration or firmware issue. Contact your system vendor for more
information or updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Hypervisor" Guid="{52FC89F8-995E-434C-A91E-199986449890}" />
<EventID>63</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-12T04:35:37.814579300Z" />
<EventRecordID>3955</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>HYPER1</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Phase">0x5</Data>
</EventData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 13/01/2015 11:21:23 AM
Event ID: 15350
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPER1
Description:
The virtualization infrastructure driver (VID) is not running.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>15350</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-01-13T00:21:23.250980100Z" />
<EventRecordID>181</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="1576" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPER1</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
</VmlEventLog>
</UserData>
</Event>
I've also read a number of other threads that haven't assisted including:
- https://social.technet.microsoft.com/Forums/en-US/396c882f-2cc8-4bc8-804d-eec75c0b8066/virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/85b323a8-9233-49b9-bc38-e28e7a4222c6/server-2008-hypervisor
There is no event ID 3112 in the event log, so this MS KB article (2490458) is not relevant
Following pics attached show BIOS settings for CPU and Virtualization / Execute Bit Disable settings:I recently ran into this. The person had made a modification to the System Properties of the Windows operating system.
System Properties > Advanced > Performance > Settings ...
On the Performance Options window, select the Data Execution Prevention tab. Ensure Turn on DEP for all programs and services except those I select is the option selected. He had the other option selected. The only way to get it to get it working
was to change the setting, uninstall Hyper-V, reboot, install Hyper-V, reboot.
. : | : . : | : . tim
Maybe you are looking for
-
BAPI_ACCOUNT_GETBALANCES only supports IS Utilities?
Does anyone know what tables this BAPI goes against and if it only supports IS-Utilites and will not return standard customer or vendor balances? Thanks
-
Auto Closure of the PR once the PO is made
Hi !Friends , My requirement is such that once the PO is made reference to that PR it should get closed (tick mark on the closed box in Item detail) Do we have any user exit or Badi for this , if so kindly share them. Thanks in advance
-
While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time Now I am working with FireFox Today I have noticed that FireFox had this Google Talk pop-up Maybe this pop-up Google Talk is what is causing Safari 7.1 to cras
-
Hello everyone, I'm currently working with WL 6.1 and I'm having trouble with the persistence of some session variables which are initially created correctly on the server side, and they get lost (null) once the Web
-
Problems with my Acrobat IX reading images
I have just started having problems with my Acrobat IX reading images. I have now noticed that when I open up a PDF, the images are now blacked out with a black box. These are all documents that I have been able to read just fine in the past. I hav