BES vs BES/BIS Service - Restrictions?

Hi
I have a BB Curve 8900 and I have BIS service on it. I have friends and colleagues who have BES service on their BB Bold 9700. Company IT Policy restricts them from adding me on their BBM. They receive my invite and accept it but it goes into the void. I am also able to send them PIN msgs and they receive it but they can not reply to them.
My service provider provides a service called BES/BIS where both BES and BIS are provided. I have taken this now and still have the same problem as before. My question is, if my friends subscription is changed to BES/BIS will that allow them to communicate with me on the BBM through the BIS?
Thanks.

Hi and Welcome to the Forums!
Nope. The level of data plan that one has only defines the level of services that can be made available. With BES, if an IT Policy restricts some of those services (e.g., BBM and PIN messaging), then those services are simply not available on that BB. So, changing plans will have no effect on this service being blocked by the IT Policy for as long as that IT Policy exists on the BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

BIS service in China

Does anyone know when BIS service will be available in China through China Mobile?
BES service has been available for some time now, and recently there was news about RIM and China Mobile preparing to start offering BIS service.
Thanks,

Does anyone know when BIS service will be available in China through China Mobile?
BES service has been available for some time now, and recently there was news about RIM and China Mobile preparing to start offering BIS service.
Thanks,

BIS services on Z10

Hi
Currently i am using BB 8520 curve and using Airtel BIS services. I want to know whether these BIS will work on my new Z10 and if not then what is the option.
Also please tell me if i use normal gprs what is security for mails and other data. Is the mail service will be the same as in the case of BIS like push mail from blackberry server.
Please help

Hi and Welcome to the Community!
BIS is no longer required for email functionality, though there is some debate as to if BBM requires BIS or not (I think not, and that BIS is entirely eliminated, but the carrier must still provision things correctly for BBM to function). BlackBerry has implemented ActiveSync for email, and it no longer uses BIS as the interface between the email server and the device. The device no directly interacts with the email server via ActiveSync. I do not know what security exists...I believe that if you have BES, higher security may well be usable (likely server set, and requiring BES10).
In some cases, it has actually been reported that leaving BIS attached to an account when shifting to a BB10 device actually prevents many functions...requiring the carrier to remove BIS from the account, which allows the BB to then function correctly. I do not know if this is the case with your specific carrier or not.
In general, all that is required is a generic data plan...but you must ask your carrier for anything specific.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Activating BIS service in china! Help!

I am hoping someone can fill me in with the general info needed to activate BIS service.
I just moved to shanghai and went to get my BB activated with a service plan. I was told to get a sim with a data plan first then sign up the BIS service online. I did what I was told but after 3 hours (that's how long they said it would take to work), it wasn't activated with BIS. I called CS. They said they already did what they were supposed to do, which was to activate APN. The only reason they could think of was that my IMSI# wasn't provided to the BIS group. Long story short, I got the ImSI, called BIS group and provided the info. After they fiddle around with it, they said it should work...obviously, it doesn't! They asked me to call CS again to double check if ApN was activated and it is.
Now they are investigating as to why it isn't working. I don't think thy have the slightest idea why it doesn't. I want to use my BB so if you guys have any suggestion, I would greatly appreciate it!
A little additional info: my BB worked when I was in hong kong. I manually input the APN setting in my berry. I also tried to register the Host Routing Table and it's still empty.

shogun308 wrote:
My unit is not being sold in china at the moment. I will worry about that later once I can get on BIS.
That's actually my point. If the carrier does not directly support the specific model number of BB, then their system may not deliver to the BB the required Service Books in order for BIS to function. I have no way to know if your new carrier falls into this category or not.
shogun308 wrote:
I used a PayGo plan while I was in hong kong. last I checked in hong kong, BIS wasn't active since I only purchased 1 mth of BIS service. However, the sim card/account still had credits on it so I could make phone calls. Would that be a problem? If so, how do I unregister it? Is this something I could do personally via RIM website or RIM tech support? Or is it something china Unicom can handle.
If this is causal (I cannot know for sure), then the place to accomplish the un-registring is the carrier that has it registered. RIM can do nothing since the carrier controls their own systems.
Before proceeding, please try this, with your new carriers SIM installed in the BB, and please first test that you can correctly use all of your voice-level services before doing the below steps:
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for an "Activation" or "Registration" message to arrive on your BB...there should be just one.
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for one "activation" message for each configured email account (if any) to arrive on your BB.
If there are Service Books left over from your prior carrier, you may have to manually delete them. Sorry, I can't guide you in any greater detail as I've no idea what their SB's might look like...but, if you delete all SB's, then resending them should generate new and proper SBs from your new carrier.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Regarding BIS Service in INDIA

TO WHOM SO EVER IT MAY CONSERN
Sir / Ma'am,
My Name Is Jay Mehta(India) and I'm using BB since 3 years.I'm using Curve 9360.
Now BBM Introduce in iOS and Android they are using this serevice on internet they don't have to pay any BIS cost.
One of the store delear to told me that in BB OS 10 you can use all feature on internet you dont need BIS service.
So my point is how long we have to pay 400 INR.?
So is Blackberry(RIM) will launch any update for OS 7 user? So they can use all service in internet cost? Or they will reduce BIS cost?
Awaiting for your reply,
Regards,
Jay Mehta

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
ALL pricing is a matter for the local carriers to set...BB does not force any pricing models onto the carriers, they decide for themselves what they will charge. In some markets, BIS has never cost more than a non-BIS data plan. In other markets, it has always commanded a premium price. Each market is different, and controlled not by BB, but by the local carriers.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Z10 BIS service not working

Hey guys,
do you think that BB Z10 need BIS service or only Internet service???? any buddy has an idea about this issue!!!!
kindly advise.......
Hussein Ayash
Solved!
Go to Solution.

Lunabel wrote:
Ok but will BBM still work without BIS?
Yes, generically...but only your carrier can tell you anything for sure as they are in control of all of your services. There are many "flavors" of BIS, and some carrier folks still refer to BIS even when they don't actually need to assign BIS for BB10 devices. Such is the nature of a brand new, and very revolutionary change to how BBs function for the carriers. But the carrier does need to configure your account with them correctly so that you receive the services to which you are entitled.
Lunabel wrote:
Also my Carrier tells me that i do have a unlimited data plan, but its my fault that i get charged because they say that i use APN and i bypass their blackberry network.
I tried leaving APN empty, but by default it puts my carrier's APN, and if i leave it empty it just doesn't let me save.
Also if i use a incorrect APN, i stop having internet.
Its like they don't believe me that i can't leave APN empty.
So i think i will just get a normal data plan but i don't want to lose the BBM.
They need to tell you exactly how all of that needs to be configured for their network and services. For instance, on mine, I cannot even change anything about the APN settings...AT&T's network is configuring those for my device, and locking me out of controlling the fields. So they are responsible for ensuring that information is correct to provide the services I am entitled to, at the costs my service plan dictates.
Everything I've been told is that BB10 devices will receive BBM but do not require a BIS service plan to do so, that a generic data plan is all that is required. But, each carrier controls their network, so yours needs to tell you what must be configured so as to provide you access to the services you are entitled to at the costs your contract dictates.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem connecting BB 8900 to Alt-N MDaemon BES/BIS

Hello Everyone,
I have recently upgraded our mail server to MDaemon 12 Blackberry Edition. This gives us the functionality for BES and BIS.
So, in order to test the platform I have a user that has a Blackberry Curve 8900.
I tried following the directions that MDaemon gave us to "subscribe" the phone to our mail server, but I seem to be stuck.
When accessing the E-mail setup function on the Blackberry, it gives her two options:
Set up an email account
Set up an enterprise email account
When I select the first option, it opens up a web browser and links her to the T-Mobile site where she needs to enter an account. She says that she can go through the website on a browser on the PC and do it as well, though when she does this, it does not ask her for a incoming and outgoing server??? Yet she still receives company emails (this was how she had her work account set up before we upgraded our mail server to the BB edition). How this works... I have no idea, as I thought she needs our incoming and outgoing server. (We deleted her old work/pre-upgrade account as MDaemon's instructions stated.)
When I select the Enterprise email option, it asks whether her BB account has a BES password, which I set up for her on the server, and then proceeds to ask for the username (full email address), a password (which I assume is the BES password (poor wording on the device btw)), a mail server, it lists that Blackberry's pin, and then the option to "Activate".
We set all the settings, and proceeded to activate the phone. It then stated that it was activating the phone and started to initialize it's settings (which took about 5 - 10 minutes). I also looked on the server and saw that the BES integration listed her phone's account/ pin.
Only one problem.... where is the account accessible on the phone?? We saw no feature or function for her to access our company's/her work email account? The only accounts we saw were the personal gmail and yahoo accounts she'd set up through the T-Mobile website.
Help!?

Hi and Welcome to the Forums!
Nope. The level of data plan that one has only defines the level of services that can be made available. With BES, if an IT Policy restricts some of those services (e.g., BBM and PIN messaging), then those services are simply not available on that BB. So, changing plans will have no effect on this service being blocked by the IT Policy for as long as that IT Policy exists on the BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with Data or BIS services on Z3

Hi I have got a new Z3 phone as a replacement for my old 9220. The same SIM works well for BES and Data /Internet on the 9220 but not on z3. Checked with the carrier they plan is active and in new Z3 device it displays "e" only. Have been struggling to get this worked for last 10 days. No luck. Any suggestions please. Regards

sbassa wrote:
Same issue, with Vodafone. same sim work fine in both phones, including BOLD and Curve.
Same solution... A BIS account for the legacy devices will NOT work on BlackBerry10 models, such as your Z3.

Can't turn on reminder at a location with location services restriction.

I think I may have found a bug, or at least unintended functionality.
I have an iPhone 4s with iOS 5. When I turn on location restrictions (Settings > General > Restrictions > Location > Don't Allow Changes -- note that in this list Reminders is set to ON, which means that location services is ENABLED for this app), then create a new reminder in the reminders app, then try to have it remind me at a location, the "At a Location" switch is disabled, not allowing me to create a reminder with a geofence alert.
When I change the setting to "Allow Changes", the "At a location" switch in Reminders is re-enabled.
Interesting thing is that it works just fine if I create a reminder at a location using Siri.
I'd like to be able to keep the "Don't Allow Changes" restriction on as, if my phone is stolen, I don't want people to be able to turn off location services, thus blocking Find My iPhone.
Anyone else can reproduce/confirmt hat this is a bug?

dav3ypants wrote:
I'd like to be able to keep the "Don't Allow Changes" restriction on as, if my phone is stolen, I don't want people to be able to turn off location services, thus blocking Find My iPhone.
Hate to burst your bubble here, but all a thief has to do is turn your phone off to defeat "Find My Phone". This is common knowledge. Once turned off, a quick restore in iTunes & then listed on eBay or Graigslist.

Service restricted

I have a problem with "vista previa" (the mac os x image viewer). I cannot use the "search with Google" service regulary, a message appears and ask me if i'm sure to use the restricted service. How can I unrestrict this service?

Try this. Open Safari, go to the Safari menu, then Preferences. Under the General tab, click the "Default Web Browser" dropdown list, and re-select "Safari". Close the preference window.
Let me know if that helps. You could also try repairing your permissions from Disk Utility (in the Applications/Utilities folder). Open Disk Utility, click your drive on the left side, and click Repair Disk Permissions.
Matt

Error during JNDI lookup Accessing Remote EJB (access to web service restricted using declarative security model)

Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my web
service with a declarative security model by implementing steps provided in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. When prompted
to accept the digital certificate, click Yes, when prompted for network
authentication information, enter username and password, navigate to the
Test Form tab of Test View, invoke the method by clicking the button and I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I tested my
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order to get
that working. Has anyone seen similar behavior? Is there a known resolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Andre,
It would be best if this issue is handled as an Eval Support case. Please
BEA Customer Support at http://support.beasys.com along with the required
files, and request that an Eval support case be created for this issue.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I removed "t3", still get an error but a different one (Unable to create
InitialContext:null):
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetVisaHistoryTransactions.getVisaHistoryTxn(GetVisaHistoryTransactions
.jws:67) </jwErrorDetail>
</detail>
</error>
Note: inter-domain communication is configured properly. The Web Service to
remote EJB works fine without a declarative security.
Any other ideas?
Thank you for your help.
Andre
"Anurag" <[email protected]> wrote in message
news:[email protected]...
Andre,
It seems you are using the URL
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB
whereas you should not be specifying the "t3:" protocol.
The URL should be like
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB
Please do let me know if you see any issues with this.
Note that this will only allow you to access remote EJBs in the same WLS
domain. For accessing EJBs on another domain, you need to configure
inter-domain communication by
following a few simple steps as mentioned at
http://e-docs.bea.com/wls/docs81/ConsoleHelp/jta.html#1106135. This link has
been provided in the EJB Control Workshop documentation.
Regards,
Anurag
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Raj,
I tried that before, it didn't help. I got similar error message:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB]</faultstr
ing>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
Anything else should I try?
P.S. AccountDelegatorEJB, the remote EJB my Web Service calls is NOTaccess
restricted.
I hope there is a solution.
Thanks,
Andre
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Andre,
Can you try using the following url with username and password
jndi://username:password@host:7001/my.resource.jndi.object ?
once you add webapp level security, the authenticated is the user who
invokes the EJB.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/ejb/con
CreatingANewEJBControl.html?skipReload=true
has more info on using remote EJB's.
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Alla Resnik" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my
web
service with a declarative security model by implementing steps
provided
in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. Whenprompted
to accept the digital certificate, click Yes, when prompted for
network
authentication information, enter username and password, navigate tothe
Test Form tab of Test View, invoke the method by clicking the buttonand
I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during
JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookupfailed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260)at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64)</jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I testedmy
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order
to
get
that working. Has anyone seen similar behavior? Is there a knownresolution?
Or a suggested way to work around the problem?
Thank you.
Andre

Windows SMTP service - restrictions

Hi
I have installed a SMTP service under IIS 6.0 in windows 2008 R2
I would like to know if is possible to restrict the SMPT traffic to specific domains
Example: i only want that only relay traffic to google.com
Thanks in advance.

Hi,
Please refer to Don's suggestion in following thread and check if can help you.
restrict destination domain on SMTP service
In addition, for your current issue, I suggest that you should post it in
IIS forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

BIS Service Provider

I was told that if I write here, someone will give me a link
to my providers setup for my wireless phone. I use
ATT. I have logged in there to their wireless setup and
it has been virtually useless in resolving my problem.
I even "chatted" with an ATT service person, who said
they could help me with none of my issues; that I must
go through Blackberry for my answers.
Help!
I really, really hate this Blackberry phone.
It is terribly unnavigable.

First of all, do you have and pay for a 'BIS' plan on your service??
See this thread here..
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryInternetSolution&message.id...
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Service Restricted for Non-Payment of Paid Bill

I can't believe having paid/cleared a bill online 6th June, how my service could be restricted 21st June ofr non-payment. That's ridiculous! To make matters worse, you have to wait 24hrs to get service back.
Laynet

Hi
I am sorry to see you are having problems
I suggest you contact live chat at this link they should be able to help you
http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Web Services - restriction

Hi,
I have developed a web service and deployed it in standalone Oracle oc4j server and i published the web service to UDDI registry.
We given the access to all users to view the registry. But we want to restrict who are all implementing our web service. So in future, if we change the service we can notify them.
rgds,
Bala Murali

We given the access to all users to view the registry. But we want to restrict who are all implementing our web service. So in future, if we change the service we can notify them.
rgds,
Bala Murali It'd be helpful if you could clarify your requirement. Do you want want to restrict the users who can implement your web service, i.e., restricting access to the service interface specification (such as <wsdl:binding> of a WSDL)? Or do you want to restrict users to access the web services you implemented?
- sam

BES vs BES/BIS Service - Restrictions?

Similar Messages

Maybe you are looking for