Besides Maya, is there another Motion Software for Autocad2015

esides Maya, is there another Motion Software for Autocad2015

Are we just going to be left in the Wilderness until some PC Software Program decides that there is a market for Mac's... Until recently Autocad decided to start supporting Mac Users but not to the extend they support the Virus Plagued Breaking Down PC/Window Crowd... Is this going to be an unsolvable Problem until there are no more PC's left... That will be awhile...

Similar Messages

Is there compatible motion driver for LabVIEW 8.6?

Is there compatible motion driver for LabVIEW 8.6? The latest motion driver seems to be 7.6 and it only support up to LabVIEW 8.5...

If you buy LabVIEW 8.6, you will also get 2008 August Driver CD.
NI-Motion 7.7 driver should be included in it.
Or you can wait for a while.
I guess NI will put on Web these days.

Why did Apple destroy iTunes? Is there another music player for Mac.

I hate the new iTunes. Useless steps for navigation. They took something simple and complicated. Is there another music player for Mac. Unless I get the old iTunes back I'm done! I would use anything but this ridiculous player. How could they do this? Steve Jobs would never have let this happen.
Plus it's slow!!! Diffcult to burn CDs then find them. Yikes!!!!

iTunes works fine for me, and hasn't been "destroyed" by any means. If you can't deal with the new, simpler interface, just go to the View menu and select "Show Sidebar" and "Show Status Bar". iTunes 11 will then look much like the pervious versions did.
Diffcult to burn CDs then find them.
Not sure what you mean here. In what way is it difficult to burn a CD, and what do you mean by "then find them"?
Regards.

Is there any Ipcommunicator software for 64 bit OS???

Is there any Ipcommunicator software for 64 bit OS ??? or same setup in CISCO site is working with with 64 bit os's?

IP Communicator supports 64 bit OSes. I'm running CIPC 8.6 on 64 bit Windows 7.
Thanks, Jeff

Is there Remote Desktop Software for Lion?

I have been using RDC 2.1.1 to connect to my PC at work. However, after an Exchange server upgrade, it doesn't work anymore. I went looking for a newer version and could only find versions compatible with iOS devices, not computers. Then I looked at Apple discussions under RDC (which I cannot find now) and saw that someone recommended CoRD as not only free (RDC apparently now has a charge) but also better than RDC. I downloaded it but cannot figure out how to connect because it does not seem to have any input areas for usernames, passwords, etc. It's pretty darn bare. Can someone tell me what to do with it?
On another discussion, someone recommended Software Update to get a newer version of the RDC. But when I open RDC, there is no software update option. Unless the person meant Apple's software update, in which case it would have done that automatically during one of the regular updates.
I'm running the latest version of Lion on an iMac.

Microsoft Remote Desktop Connection for Mac shouldn't be affected by an Exchange server upgrade in any way. If RDC no longer connects to your work system, then your network adminstrators have probably made a change to your network, perhaps to a firewall, and you'll need to sort it out with them. RDC 2.1.1 works on my system, though I find it slower than other options for connecting to Windows systems. RDC 2.1.1 is the latest version available, by the way, and is still free.
If you want to try CoRD, though, information how to set it up can be found it it's Help files. You can also ask for help in the CoRD forum:
http://sourceforge.net/apps/phpbb/cord/viewforum.php?f=1
As to Software Update, I think either you or the other person was confused, and was referring to Apple Remote Desktop, a completely different product. You cannot update Microsoft software through Software Update in Mac OS X. n
Regards.

IS THERE ANY MALWARE SOFTWARE FOR MAC

I am hoping someone can help me with this I am searching for malware detection and removal software for my MakBook Pro. I am about ready to throw it threw a window and use my windows desktop (which is what I am using to ask this question). When using my MacBook I am CONSTANTLY having problems with different malware software popups and other popups that I never used to see. I am seriously getting ready to smash this MacBook to pieces.
PLEASE HELP ME!!!!

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(123319)

Is there anti-spam software for Ipad2?

I have anti-spam software on my laptop and desk top. But, seemingly, there is no anti-spam software for my iPad and/or iPhone.
Or is there?

You don't need such software, thus none is available.

Is there any database software for Snow Leopard?

Hello, I am trying to set up a database for work but I use macbook pro at home. I know Access is a good database software and I once used it before but now I migrate to mac and I found Access doesn't support mac. Can you recommend any database software for mac? I know Bento is one but it seems work for personal. I want some soft like Access can be used for commercial, for office. And I prefer the soft can generate documents used for Windows too because in office I use Win. Thanks in advance. I know this question may not be posted here, but I can't find a more suitable place to write. Sorry for that.

FileMaker Pro

What is going on? Westell 6100 keeps turning on and off and now there's new software for modem?

Recently, I've been having problems with my internet connection. No big whoop-- I would just power cycle the modem or reset it to default or whatever.
Then this morning I woke up to find that I could no longer control the modem (Westell 6100) at all (reset the modem) and that every few minutes it will keep going through the process of turning on, then turning off. In other words, the lights will all turn on like "normal (power, ethernet, dsl, internet)", I'll have internet access for a few minutes, then the lights will all turn back off, then back on again. Wash, rinse, repeat.
I thought I was or suffering a virus until I accessed "http://192.168.1.1/", only to see new Verizon software installed (ProLine DSL???) for the first time in maybe the 8 years I've had high speed internet. Is this repetitive cycle of turning on and off just something that's just a temporary thing or is my internet now completely screwed?
What's going on?
Solved!
Go to Solution.

Verizon more than likely updated your modem's firmware and this as a result, messed it up causing it to go into a constant reboot. Give the modem a reset to Factory Defaults, holding in the reset button for 30 seconds to clear the modem configuration file to rule out any problems being caused by that. If it's still rebooting and you cannot update the firmware by any means (the trick to doing this is to wait until the modem is fully booted and you are at the modem's firmware upgrade page before attempting to flash it!), get another modem from Verizon or purchase your own.
To update the modem's firmware, you'd need to visit http://192.168.1.1/ , choose Advanced and then choose Firmware Upgrade. You will need to have a firmware file from Verizon ready to install to the modem via the browser. You will be prompted for a Username and Password to do this, so try one of the following if you wish to try:
admin/password
admin/password1
admin/admin
admin/admin1
Your Verizon Username and Password.
Please note that if you reset the modem to factory defaults, the Username and password WILL be admin/password. You will need to change this when the modem asks you to do this.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Is there plagiarism checker software for mac

Does anyone know if there is any plagiarism checker software that apple makes? This would make my life a lot easier with school.
Thanks

Just Google "plagiarism software mac os x" and you'll get a plethora of hits.
Clinton
EDIT: None that I see specifically from Apple, though.
Message was edited by: clintonfrombirmingham

Is there stress testing software for the Mac?

I am looking for a stress-testing program for OSX. Something that would press a computer to it's limits and make it crash faster, if it's supposed to crash intermittently. Can anyone suggest such a program for the Macintosh?
iMac G4 Mac OS X (10.4.6)

Hi, T.M.
If you're looking to troubleshoot an intermittent problem that may be hardware-related, See my "Apple Hardware Test" FAQ for comprehensive advice on using the Apple Hardware Test in troubleshooting, including running the test in Loop Mode.
There is also Xbench, a performance benchmarking tool.
More details as to what prompts your question might help.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Looking for a free stop motion software for my Macbook Pro?

Sorry if this is in the wrong category; I am new here.
I'm currently working on a 40 minute stop motion film. I've experimented with various stop motion apps, but none of them fit what I need. I'm making the film in 9 parts, and I want to be able to export each video as a .mov file and later import into FCPX to make edits and combine everything. I have the audio completely recorded and I plan to take the pictures using my Macbook Pro's built-in webcam. (This film doesn't need to be very fancy; it's for my family.)
I'm looking for something free (not a free trial) and without a watermark. Each of the 9 parts is inbetween 3-8 minutes. What do you recommend?
Thanks
-Jenni16

Tontothetank wrote:
I want to find a 1080p projector that I can connect my macbook pro to wirelessly and mirror what is on the screen... Or maybe a way to go about doing so, I knwo that you can mirror your iphone and ipad with ios 5 and apple tv...not sure on macbook pro? This might be too strange of a thing to be looking for but it would be so nice to eliminate wires from my life as much as possible...i.e. wireless headphones, printer, and projector (rather than a television) Anything help on this would be great! Thanks everyone!
You can do it, but are you prepared to spend? it won't be cheap. It may be cheaper than I thought.
You will need a projector with an HDMI input, and you will need a method of transmitting the HDMI signal, complete with all ancillary protocols (so HDMI 1.2 at least, 1.4 is safer) via wireless. That means way more bandwidth than 2.4 or 5G wireless can offer.
I have had success with the TruLink 60Ghz WirelessHD transmitter/receiver, 30ft range (20 is more 'real world') 1 hdmi in and 1 hdmi out, so they replace the cable. Last pair I bought were $600, but I just saw that Amazon have them available at $141 ....
However these are line of sight devices, no motion and no obstruction between the pair or fuzzzzzz

Does anyone know if there's any software for the iPad that allows you to trigger videos via Midi?

I am a musician and would like to trigger certain videos and audio samples via an external midi controller. Ideally I want to project the video image from the iPad into a projector or possibly via Air Play. I'm currently using Arkaos Midi VJ software on my old Macbook but would like to replace that with the iPad. If anyone has any thoughts, they would be much appreciated!

If you check the App Store in iTunes for remote control programs, you find a lot of them. You will have to decide which one is right for you.
Allan

Is there label-making software for printing on address labels?

Hi all,
I am a science person looking to create labels for some animal stocks. I have a list of the stock and am wondering if I can use pages or numbers to organize the list and effectivly print out these list onto Avery labels"? Also, can I do it without going through the crazy hassle of formatting this list into those annoying little boxes? For example, can I put the name and number if the stock into a list format and have it print onto these labels? Thanks!

Question asked and answered many times.
Go to my iDisk :
<http://public.me.com/koenigyvan>
download, expand and use
For_iWork:iWork '09:for_Numbers09:for_labels.sparseimage.zip
Yvan KOENIG (VALLAURIS, France) jeudi 21 juillet 2011 23:10:57
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Is there any free software for reading PDF in BB8300

Can anyone advice me a free PDF reader for BB8300, the eOffice is too expensive;(

mizu wrote:
i think the problem with your firmware at your blackberry
I believe that all the 8330 come with the same OS 4.3 but the difference I believe is if the units are connected to a BES (BlackBerry Enterprise Server), the BES has an attachment converter that allows corporate users to get PDFs and other types of attachment.
I'm not sure if the standard data plan from Verizon has anything like that.....

Besides Maya, is there another Motion Software for Autocad2015

Similar Messages

Maybe you are looking for