Besoin de laide sur pages

J'ai un mac et j'ai besoin de l'aide.. comment on peu t'on faire pour que sur pages il corrige non seulement les erreurs mais les verbes aussi? (comme pour qu'il corrige le temps des verbes et tout?) merci

Pardonnez mon mauvais français.
Correction sur épreuves des documents (un pue!)
Lire le Guide de l'utilisateur. Vous pouvez télécharger à partir du menu Aide dans Pages.
Cordialement,
Ian.

Similar Messages

  • When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application." Using OS X 10.6.8

    When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X."
    I've run the software update several times. Pages is located in my iWork '09 folder in Applications. Using OS X 10.6.8

    Delete and reinstall it.
    (104030)

  • Un fichier texte crée sur Pages pourra il être lu par Word ou Open Office sur Pc?

    Un fichier texte crée sur Pages pourra il être lu par Word ou Open Office sur Pc?

    I hope Google translate is correct.
    Utilisez la commande Fichier -> Exporter pour enregistrer le fichier en tant que .txt ou .doc ou .rtf.
    Use File > Export to save the file as .txt or .doc or .rtf.

  • Surligner sans avoir besoin de recliquer sur surligner

    Bonjour
    j utilise adobe reader pour etudier de nombreux livres et documents et de ce fait je prends de nombreuses notes et je surligne un nombre considerable de mots et phrases sur une meme page.
    Y a t il un moyen de garder actif le pavė surlignage pour eviter de cliquer interminablement sur ce pavė a chaque mot que je souhaite surligner sur la meme page?
    Merci pour vos reponses.

    In the application's Preferences select the Category "General".
    At the top of the Basic Tools pane tick "Use single-key accelerators to access tools".
    Now, when on a given page, after using the Highlight tool simply press the "U" key to turn on the Highlight tool for use again.
    Be well...

  • Making sure page prints on page

    Often times when I print from these forums, the right side of the page gets cut off and does not print on my printer. Is there a way to configure it so it prints the entire forum page on the paper?
    Thanks.

    To test it, I just printed this page and it printed fine.
    I suppose your are using Safari, Under File I selected Print then when the printer window showed up
    I choose "preview" then click "Print" and it printed all this page.

  • Je ne peux plus enregistrer de document sur pages.

    On m'écrit "Enregistrement automatique du document impossible." J'ai vérifié et mes documents ne sont pas fermés ou protégés... Que puis-je faire?

    Bonjour
    As tu réussi à régler ton problème.
    J'ai exactement la même chose que toi et j'ai beau restaurer l'iPod rien ne règle le problème de la musique
    Merci

  • Besoin d'aide sur l' option Tracé--- Décalage

    Bonjour
    Je m' explique :
    Imaginons une forme que je réduis d' 1pt avec l'option Tracé---> Décalage:  -1pt
    Jusque là tout va bien..
    Mais comment feriez vous pour ne garder que la forme décalée de -1pt  et pas avec tous les anciens tracés ?
    Je pense que ça doit etre via Pathfinder mais en essayant plein de chose je n'y parviens pas.
    Merci pour votre aide !
    Bonne soirée
    Ben

    La solution tient plus de l'habitude dans illustrator :
    Sélectionner les formes à décaler.
    Appliquer menu objet > tracé > décalage.
    Masquer les objets sélectionnés (cmd/ctrl-3)
    Resélectionner les formes.
    Les effacer.
    Réafficher les objets masqués (cmd/ctrl-alt-3)
    Si vous avez un contenu complexe, après l'étape 1. passez dans le menu Sélection, mémorisez la sélection.
    Du coup, l'étape 4. devient "récupérer la sélection, sélection 1"
    Et pour bien faire, Sélection > modifier la sélection > supprimer la sélection (vu que vous venez d'effacer les objets concernés.
    Mais il serait plus intéressant d'avoir un script si vous faîtes cela souvent…

  • Comment ouvrir un fichier dans Pages après un bug sur iCloud ?

    Bonjour,
    J'ai crée, puis écris sur un fichier une vingtaine de pages sur Pages pour iPad. Lorsqu'il a essayé de se synchroniser avec iCloud ma connexion en 3G s'est arrêté.
    Depuis, impossible d'ouvrir le fichier sur mon iPad, ni sur iCloud.com (le fichier est grisé ou un message "mise à jour..." s'affiche sur internet).
    Même en WiFi avec une très bonne connection (mon fichier problématique pèse 1Mo, je n'ai pas de problèmes avec des fichiers à 30Mo)...
    Pouvez vous m'aider s'il vous plaît à récuper le contenu ? C'est un fichier très important, un travail d'une année...
    Plus d'informations:
    Il existe sûrement une version procèdente sur iCloud, j'utilise le même fichier depuis que iCloud est sorti. Un moyen de la récupérer ?
    Le fichier dois être en cache sur mon iPad. Comment le récupérer (Logiciel comme iExplorer ou Jailbreak) ?
    L'iPad a été restauré et rédemarré plusieurs fois, mais le problème persiste sur iCloud.
    La date du dernier enregistrement est sur Pages est du 8 mars à 10:19 soit quelques minutes avant le bug.
    J'ai contacté plusieurs fois le support, mais ils me disent que mon fichier est perdu. un m'a dit de contacter le support de MobileMe (mais j'ai pas de comte mobileMe donc échec. Un autre a essayé de m'aider et m'a demandé d'appeler le support pour developpeurs (étant donné que je le suis), en supposant qu'ils ont un moyen d'accéder à nos donnés depuis les serveurs d'iCloud (absurde ?) et récupérer le fichier dit "corrumpu".
    Toutes les mises à jour sont éffectués sur mes appareils.
    Merci d'avance,
    Igor.

    Bonjour,
    J'ai quasiment le même problème.
    Pour le boulot, on m'a envoyé par mail un fichier Indesign créé sur Mac et sous CS5.5.
    J'utilise CS6 sur PC (Windows 7). Impossible d'ouvrir le fichier ! J'ai le même message que Leonard : "le fichier n'existe pas, vous ne disposez pas des droits d'accès nécessaires ou le fichier est utilisé par une autre application".
    J'ai vérifié les propriétés : le fichier n'est pas en lecture seule.
    J'ai lu plein de choses, mais je ne trouve pas vraiment la solution...
    La personne m'a renvoyé le fichier une seconde fois, mais cela ne règle pas le problème. Je lui ai demandé de le réenregistrer dans un autre dossier (mais comment vérifier qu'elle l'a bien fait ?), de vérifier qu'elle n'avait pas de fichier .idlk, etc.
    Pensez-vous que l'enregistrer au format IDML pourrait être la solution ?
    J'ai vraiment du mal à saisir le problème... J'espère vous avoir donné suffisamment de détails.
    Je reviendrais donné la solution si jamais je la trouve !
    Merci !

  • Sycning pages from MacBookPro to Ipad

    Purchased this 'app' and paid for it yesterday. It shows up in my Itunes on my Mac.
    It does not sync. No icon appears anywhere on my Ipad. My Mac is system 10.6.6

    Hi and welcome.....
    Connect your iPad to your Mac. Launch iTunes. Make sure the iPad is recognized under Devices on he left side of the iTunes window.
    Select the Apps tab. Select the *Sync Apps* box and make sure Pages is listed just below that.
    Now click the Sync button buttom right side of your iTunes window.
    If that didn't help, restart your iPad.
    Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Try syncing again.
    Carolyn

  • Error message when trying to open pages

    I'm having trouble opening new or existing documents using pages.  I get the error message, "pages cannot be opened because of a problem.  Check with the developer to make sure pages works with this version of Mac OS x.  I've never had this problem before and it's been working since I purchased my IMAC back in 2010.  Other programs for Iwork are working fine..Numbers 09 and Keynote 09.  I tried reinstalling the software several times, restarting my computer and still no luck.. Any suggestions?

    You didn't save the iWork trial.dmg  somewhere by any chance?
    You have not move enough parts of iWork over to the new computer. There are files in
    Users > your name > Library > Application support > iWork. Get the iWork folder
    MacHD > Library > Application Support > iWork '09. Get the folder
    To get into the users Library you have to on Mountain Lion in the Finder click on Go in the menu while pressing down the Option key.

  • Pages cannot be opened because of a problem

    Installed Snow Leopard last year over Leopard. Currently running 10.6.3 on MacBook Pro. I've not used any of iWorks before. I tried to open Pages v 4.0.3 from the iWork '09 program installed on my computer and got this message: "Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application." I'm not sure if iWorks came with Leopard or Snow Leopard and don't want to reinstall the OS. Can anyone help?

    Do you actually own and have registered iWork '09? There may have been a demo version, it did not come free with the computer.
    Have you moved either Pages or any of the iWork programs from the iWork folder in the Applications folder? They should stay where installed.
    Try reinstalling iWork '09 from either the DVD or the DLed demo file.
    You may not have migrated the installation correctly.
    Peter

  • Pages can't read a file I created yesterday

    I spent hours working on a document yesterday that was very important to me, saving it regularly. When I came back to it today, it said that Pages cannot open the file because the format is not supported. I can't open it with Text Edit, either. It was saved to My Documents. Other Pages files in the same folder work fine. When I view the package, I can't even open the .tiff thumbnail that shows up, though things like that work fine in other Pages packages. It is very important I can at least extract the text from this document. Is there anything I can do?

    How are you trying to open the document? Using File > Open or double-clicking? If you're double-clicking, are you sure Pages 2/iWork '06 is trying to open the file & not another application or Pages 1?
    I'm going to ask someone else for some more help on this for you.

  • Resolution of Pages PDF for offset printing

    I'm making a brochure for my wife's company. I've already made it in Photoshop (on my PC). I've duplicated it in Pages (tri-fold template). The pdf made in PS is about 25MB. The pdf made by pages is about 1.3MB. The printer wants files that are 350ppi. And now that I think of it, they also want them in the CMYK color space. Pretty sure Pages won't do that. Anyway, anyone made a document that was printed by a service (offset press)?
    Dave
    in Maine

    I'd agree with what Peter says but for a possible few points.
    1. As you have calibrated monitors, you presumably have a spectrophotometer and a monitor calibration / monitor characterisation package. The package should autoinstall the ICC profile for the state of the display and set the ColorSync Utility and the Display control panel correctly. However, take care that you don't override these settings manually. The typical mistake is to use the display profile as the profile for colour correction. The reason this is a mistake is that your display typically has a smaller colour space than your offset printing condition, except if you are printing on lowend gray newsprint or lowend gray magazine paper as in US SWOP. For any half-decent printing gamut, use a larger colour correction space such as ECI-RGB or AdobeRGB or if you are digital then PhotoGamutRGB by the pro photographers in Germany. If you can't define a colour in the colour correction space you can't define the colour in the output space - you have to have the colour to be able to print the colour.
    2. In using the PDF/X-3 workflow, check with your printer for the bleed box and trim box. If you don't have to have transparency, try staying away from it in your design. The idea is that PDF is output to a determinate imaging area for the page itself, which you define in Page Setup, but printing processes have different needs of additional space and this additional space is customisable. If you do have transparency, set the transparency flattening appropriately in the PDF/X-3 dialogue. Finally, talk to your printer about the printing condition and determine if there is a house printing condition for which an ICC printing profile is available or if the shop supports ISO 12647 in which case you can get prebuilt ICC profiles at www.eci.org and the measurement data itself to build your own gamut mapping and black generation at www.color.org which is the home of the International Color Consortium.
    Probably a bit rambling, sorry about that.
    hh

  • Duplicate form fields across multi-page forms

    Hello!
    I have some multi-page forms which include a few identically laid out pages; pages which take a long time to manually set up (nearly 100 fields per page, of varying sizes and positions)...
    I tried to duplicate the fields from one page to the others, which worked; but they are identical fields, meaning text input into one will likewise be seen in the other pages. I need the other pages to be unique, even though they look identical (field-wise they look identical, the background images for my form distinguish the actual contents of each field).
    Copy/Paste is the same as duplicate.
    I can just do that and then manually rename a few hundred fields; but at that point I am not much better off than manually placing the fields. Some, but not much.
    Is there any way to do this?

    I would look at using the template object within for this task.

  • How do I adjust the depth of a text box on a page in an iPhoto book?

    How do I adjust the depth of a text box on a page in an iPhoto book?

    You can't.  Those are fixed.  You can create a custom page in Pages where you can duplicate the background add photos with frames, any size of text box and text.  Make sure page size is the same as you've selected for the book. 
    Then do a Print ➙ PDF ➙ Save PDF to iPhoto of that page.  That till create a 200 dpi jpeg file of that page that you can use on a blank page with an image for the background layout. This is a rough example:
    Custom book cover
    Click to view full size
    Custom text page (left)
    Click to view full size
    OT

Maybe you are looking for