Best 32" lcd for ps3 and tv
Hi all
I have been searching forever for the best 32" lcd to be used for ps3 and hdtv. I also will be using the blue-ray player alot. I was very disappointed in the 32" sony Braviakdl32l5000 i looked at today . Any help would be so appreciated!!!
Thanks
What didn't you like about it? There is a 1080p model with 120hz if you want to take a look at it. At that size, there's not much in the way of image quality but the one you looked at is ideal simply because it doesn't have 120hz processing which screws with your gaming image and introduces lag.
Similar Messages
-
What's the best approach/program for finding and eliminating duplicate photos on my hard drive? I have a "somewhat" older version of iPhoto (5.0.4), and it doesn't seem to offer anything like that except during the importing phase of syncing my phone...
I wonder, is there room to transfer them to your phone, & then back to filter them?
-
Best format for ps3 and apple tv
What is the best format for viewing movies on a hdtv (1080p) via ps3 and apple tv?
Not sure what my best option would be in the sharing/export options, also should I make it 16:9 even though all the footage was 4:3?
Message was edited by: rwltrz4Thanks.
I've posted up on their forum too (the folks over there are not as responsive as you guys, helpful, but not in the same volume )
I kinda hear what you're saying, but the encoding time (fps and time taken) is pretty slow on my PPC G5 iMac at the moment, and if the Turbo.264 is doing most of the processing then from what you say it'll stay the same on a new Intel Mac. I really hope not, or it'll be me throwing in the whole notion of recording TV on my Mac and heading off down the shop for a PlayTV for the PS3.
Either that or hope for a decent upgrade to the Mini at Macworld, sling the Apple TV on to ebay (film rental selection here in the UK is still pretty weak) and replace with a Mini, plug the tuner in that and watch native EyeTV recordings without the need for lengthy encoding. I reckon Front Row, and an iPhone Remote will do almost as good a job for my music as the Apple TV does.
One day we will look back and laugh at the notion of an hour long TV show being 'encoded' for playback at all, let alone waiting more than 2 minutes for the process to happen! -
Time Capsule best to dedicate for backup and usb external for other data or partition TC for dual
I have lots of video and photo and have 2TB drive on my iMAC and want to use TC for backup.
1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC? Otherwise very slow via wireless and perhaps better to get Seagate Go Flex or WD and go Firewire right?
2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
Here's my use case:
1) Time Machine tied to TC for the 2TB via wired to main machine iMAC - I only have this 1 iMAC.
2) Like to share data with iPhone and iPAD some pictures, etc... so do this with USB port and see data on the shared drive via iPhone and iPAD - no need to backup - just viewing - but need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
Sorry for multi questions - my first iMAC so still stumbling around to see what works best for me.
Thanks,
///dondon1217 wrote:
1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC?
If I understand your question, depending on the signal strength, backing up over Wi-Fi can be rather slow. An Ethernet connection would be much faster, particularly for the first backup, which will the the largest. Backing up to a locally-connected disk will be faster still.
2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
I'm not sure what you mean by "mix partition to do 500GB per say for data on the TC". It's not recommended to share the same volume for Time Machine output and other things.
need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
If you mean that you need wireless to give an iPhone or iPad access to the Internet, a Time Capsule would do that. If you want to give those devices access to content on a Time Capsule, that's still an immature technology, although things may improve with iOS 5 or updates beyond that.
3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
A WIn7 computer will be able to see files on the drive(s) of a Time Capsule. I haven't tried that, but instructions are available. -
Best General practice for performance and tuning.
Hi ,
Can some body let me know the General Best practice for performance and tuning for Oracle Application 11i and 10g.
that can be implemented and suggest in a new environment.
Regards,Hi,
Please see the following documents/threads.
Note: 744143.1 - Tuning performance on eBusiness suite
Note: 864226.1 - How Can I Diagnose Poor E-Business Suite Performance?
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
Note: 216205.1 - Database Initialization Parameters for Oracle Applications Release 11i
EBS, performence issue
Re: EBS, performence issue
Oracle Apps Tuning
Re: Oracle Apps Tuning
Regards,
Hussein -
Best file formats for graphics and photos for iWeb
What is the best format to transfer files from PDF's, JPEGS, Illustrator CS3 & InDesign for best resolution display in iWeb
Welcome to the Apple Discussions. JPEGS should have the sRGB color profile. I don't know of anything special for PDFs. You might compress them to make them load quicker when viewed but those that I've added I've not done anything to them. For Illistrator and InDesign it probably would be best to take screenshots of them and use those. I don't think iWeb can import those formats but since I don't use either I could be mistaken. All graphics in web sites are displayed at 72 dpi so having large graphic files are not needed. Resize to approximately the size you want to display on the web page at 72 dpi and use that.
OT -
Best Video Card for Editing and Rendering?
I bet this topic has been discussed at length, but doing a search for "best video card" did not give me the results I need. I am working with the latest version of Magic Bullet Movie Looks and started to notice artifacts in rendered video; flashes, black/white lines and complete boxes in the final frame. I contacted Red Giant, and they informed me my Quadro FX 1500 is not a "supported" card and is most likely the cause of these artifacts. Strange, as Movie Looks had Quadro FX 1300 and up as listed on their web site as compatible - but I digress. My question is, what video card do YOU like for PPRO CS3 AND AE? Movie Looks, like many other programs, rely on the video GPU to render their output - what has been fastest for you, and NOT caused issues with the rest of the system? I use video overlay (as part of Nvidia's Dual View) to edit the Program ouput on a separate monitor and also need this functionality as well - can't live without it! Thanks for your answers.
System Specs:
Dual core Dual processor Woodcrest
6GB RAM
2 TB RAID HD
Current Card: PNY NVidia Quadro FX 1500Well, if you go to Adobe's hardware compatibility page is does list the 7800 as being fully supported:
http://www.adobe.com/products/premiere/search_result.html?manuSearchVar=1&modelSearchVar=0 &supportSearchVar=0&brand=&dataFormat=&version=CS3&device=graphic&format=
but the 8800 series cards are also listed, which will support CUDA once it becomes widely used. CUDA is rumored to be utilized with CS4 which will speed up render and preview times drastically by utilizing the GPU as well as the CPU rather than mostly the CPU only.
http://insidehpc.com/2006/11/10/what-is-cuda/
This could still be a year or two away, so if you think you may upgrade your video card again before that time, you may want to stick with the 7800 for now. -
What is the best leaked OS for Z10 and why??!
What is the best system update for the BlackBerry z10 in terms of battery and use of the device?>>> "leaked ones"
Please advise me please ^ ^ Thank you??Hello AZUZJUMA.
Amigo is depends on the taste of each person acuerdate each OS works differently on each device, but in my case I recommend the OS 10.1.0.4543 is one that has been more fluid and has been much better in performance ...
I'll leave the link for you to download if you like.
http://crackberry.com/leaked-os-10104537-blackberry-z10
Regards.
Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
@ gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
Problems opening ports for PS3 and XBOX 360 on WRT160N
i opened all the ports for both system but one system will be lagging while the other will be fast on connection im trying to make both system run on a fast connect is there a step im missing
Which ports you have opened for x-box and ps3..?
Have you done port forwarding or port trigerring..?
Is ps3 and x-box are connected wired or wireless...?
Reduce the MTU sixe to 1364 on the router.Uncheck"Filter Anonymous Internet Requests". Under Wireless tab,click on Advance Wireless Settings tab and Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304 and Click on Save Settings...
Now,power cycle the entire network and then,try........ -
Formatting external hdd for PS3 and final cut.
I recently purchased a 1TB external hdd. I would like to partition this drive so I have 320gb to back up my PS3 and the rest to use to store my Final Cut express projects.
Does anyone know if this is possible? I know the PS3 only reads FAT32 and I am wondering if it will be able to pick up my external hard drive if part of it is not formatted FAT32.Oskar,
This is the Final Cut Express Forum, not a PS3 forum. There's no reason to expect anyone in this forum to be able to answer questions about PlayStations. Tom was quite reasonable suggesting that you search elsewhere. -
Best Calling Plan for India and USA
Hi
Can you please suggest me the best plan to call India and USA?
ThanksNot sure to be honest. Maybe some other users can shed some light.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. *** -
Best Workstation Card for AE and Mac Pro 3,1
I want to upgrade my video card. What is the best one for my purposes.
I do HEAVY After Effects, CG (Lightwave and Vue)
I was thinking about this:
http://www.nvidia.com/object/product-quadro-4000-mac-us.html
Pros? Cons?
This is my system config.
MacPro3,1
Quad-Core Intel Xeon
3.2 GHz
Number of Processors: 2
Total Number of Cores: 8
Memory: 20 GB
NVIDIA GeForce 8800 GT
Thanks
Fred Raimondi
www.fredraimondi.comSell the Mac and spend the money in building yourself a PC with the best components you can find. You will have much more freedom of choice when it comes to hardware, especially in this case where you need the fastest CUDA card you can get. With a PC you can use any Nvidia based card in the market, while with Macs you're restrained to just a few outdated and hugely overpriced ones.
Granted, Mac towers are very good machines, and the OS is great, but CS6 relies heavily on CUDA cards, and Macs have very few CUDA options. A PC that you build yourself from the best components can be less expensive, stable and more powerful. -
Best hosting plan for iMac and PC editing?
I've been using iWeb for the past year on my personal site. I love its ease of use, not to mention how great everything looks.
Now I want to start another site with a more commercial flavor. The big difference with this one, though, is that I need to be able to update my site on my iMac at home AND my PC at work. I've yet to find a hosting plan or program that will allow me to do this efficiently. I'm thinking a web-based file manager might be my best option, but maybe there is something else out there that would be better. Would FTP be better? I have some experience with file managers but absolutely no experience with FTP.
This new site will mostly be set up in a blog style (several updates each day, permalinks, etc.), and I also want to be as flexible as possible in posting ads on the site. It seems some blogging software is fairly restrictive when it comes to ad flexibility.
Anybody have suggestions as to what might work best for my circumstances? I would appreciate any help.
iMac Mac OS X (10.4.2)I'm thinking a web-based file
manager might be my best option, but maybe there is
something else out there that would be better. Would
FTP be better? I have some experience with file
managers but absolutely no experience with FTP.
Of course you can't use iWeb for your project, because it doesn't run on PC's, and you can't update an iWeb-created site without the app and the appropriate Domain file. So you presumably need to look at a cross-platform app like Dreamweaver.
As far as uploading technology, web-based file managers provided by the host are usually very limited and not to be recommended. You should use a real ftp client to get the best results, and major apps like Dreamweaver have this built-in.
Here's a list of Mac web editors. You might check to see which other ones have Windows versions.
http://www.pure-mac.com/webed.html
The host is pretty irrelevant if you go that route.
Another option is to do everything on a site like Blogger, where you create your pages via a browser, rather than using a local web editor. -
Best video format for mac and pc
Hello,
I recently embeded an mpeg video, flv, mp4, and swf video file to my web page. I then asked several pc users to go to my page and see if they could view the animation clips. They were were able to view all clips, but the mpeg and flv clips automatically downloaded to their computer. I don't want that to happen. The mp4 did not download, and it worked as well.
How do I stop this from happening? I ask becuase it seems flv is used by mac and pc users alike, and I think I may use said format.
What is the most widely used video format by both mac and pc users?
... should I just stick with mp4 since it worked without down loading?
rekh
code i used...
<iframe width="410"
height="357"
src="http://www.mysite.tv/myfolder/myfile.mp4"
frameborder="0"
allowfullscreen=""></iframe>Colin has pointed you in the correct direction.
I'll bet you're using just plain text "links" to your files. That method by-passes the browser plug-in and can cause issues (especially on Windows).
You need solid html code that gives the browser plug-in all of the needed instructions.
Another thing that may have happened is that your fast start files have lost their fast start abilities. This happens with any fast start file that is then edited and uses a regular "save". Save As will restore the fast start feature (even in files that do not normally have it).
AVI is dead. Do not use it.
Many WMP formats (codecs) are not yet ported to the Mac OS so that delivery container should also be ruled out.
H.264 Video codec (default in most Tiger app exports) also requires the viewing machine (Mac or PC) have QuickTime version 7 installed.
Since not all machines can install QT version 7 (requires 10.3.9 or Win 2000 or XP) maybe you should rule it out, too.
So.
What are we left with?
Maybe QuickTime format using MPEG-4 Video codec and AAC audio?
They would only require QuickTime version 6 be installed. Since version 6 has been around for over 5 years it may be your best option.
But you're still going to get complaints from PC viewers. -
Best fit lines for loops and sine waves
I am trying to find a best fit line that will work for sine waves and loops (hysteresis loops). I can get the sine wave just fine, but when I switch to a hysteresis it just puts a line across the middle (I assume because of the 2 y values for every x). I am doing data acquisition that will take in both forms and graph them. I tried a polynomial fit and it doesn't work at least the way I implemented it and I tried a few others but it looks like they are all function based. Also, my y values are coming out of a Bessel filter. I don't think this would be affecting anything but I thought I would put it in here incase it does.
Did I miss one that I haven't tried that works for my application?
Thanks
PatrickRiversDaddy wrote:
... currently I am doing it by looping and reducing the error towards zero to fit the amplitude and phase. (I know the frequency). If this is what you are looking to do then I will help, or should I be doing things differently? All of the functions I have found to filter or extract tones seem to introduce a larger frequency of phase error than i get using this method, but am I missing something?
"looping" is a bit vague. What is the actual algorithm to find better estimates (e.g. levenberg marquardt, etc.)
What problems did you have with extract single tone. Can you show some data where the results from it are not good?
LabVIEW Champion . Do more with less code and in less time .
Maybe you are looking for
-
Hi Is it possible to pay down payment through APP, because when I am trying I am getting error in edit proposal, Please provide me steps I will assign points Thanks Radha
-
BAdi: Construct ID from Components in Bar Code
Has anyone used this BAdI in Aii 7.1? Trying to find where this BAdI is called. Looking for a method to convert between various barcode data, e.g. (01) (21) (10) (17) (30), and either parse out the AI data not contained in the GS1_SER ID or convert
-
Installation of BI Content cube
Hi, We are going for a fresh BI implementation. Nothing is installed as of now. When I am trying to install one of the cubes with the grouping option 'in data flow before and after' its giving error for all the infobojects saying that they are not av
-
I am a novice. I have a few thousand iPhotos stored on Dropbox. But now I have a Canon T5i camera and want to get more involved in photography. I want to open a Lightroom and Photoshop account. I have a Windows desktop and an iPad. Will I have any co
-
Hello, I'm an abolute beginner in Multisim. I want to simulate an DC -voltage equivalent from a phase difference of two AC signals. I've done two simulations: 1. Four Quadrat Multplier 2. RMS And validate them - works good. When i combine the two cir