Best 3DMARK03 Score of 9500 pro + K7N2-Delta L combo?

Ran 3DMark03 at 800x600 with default settings
and came back with [size=17]5032 [/SIZE] :]
What's your best score for this 9500 PRO/K7N2
combo at default or any other settings? Thanks
Specs:
Athlon XP 2500+ Barton @2005Mhz (1:1)
MSI K7N2 Delta-L v5.1
2x Cosair 256MB XMSC2 DDR400 w/Spreader
2x Maxtor 80GB Diamond+ HD w/8MB Buffer
FIC 9500 PRO 128MB @ 364/317
Samsung 19" 900NF
Lite-On CD/RW 48X
Toshiba DVD 16X
Audigy 2 Platinum
Win XP PRO w/SP1
APC Back-Ups 1000XS 600W
Logitech Z640 5.1
Antec TruePower 430W
Chieftec Aluminium Case

More of question to user of MSI K7N2 DELTA-L Board. Looking to use board if AGP voltage is adjustable in the bios. May be required to stablize ATI AWI video card.
Regards
AE Fronk

Similar Messages

Best Cooler For XP 3000+ on K7N2-Delta ILSR?

As the title suggests I am looking for a good, high performance Heatsink and Fan for my current XP 3000+ system. I have a K7N2 Delta ILSR mobo. Three Heatsinks I have been looking at are:
Thermaltake Volcano 12 Extreme
Thermalright SLK-900A with a Vantec Tornado 92mm fan
Thermaltake SilentTower - (I think this one requires holes in the Mobo which the K7N2 Delta ILSR doesn't have :( Please correct me if I am wrong).
I am looking for a high-performance heatsink at an affordable price (max £50) with which I can do some overclocking. Currently I have one of the Zalman ones ( I think it is a CNPS6000-CU) which is insufficient (load temps 66 C). Help would be much appreciated. Thanks in advance.

Yeah, i'm looking for a good price vs performance vs noise solution really. Both the Volcano and the Vantec Tornado are really loud, but they seem to perform quite well.

K7N2 Delta-ILSR - Radeon 9700 pro - no power.

K7N2 Delta - ILSR (6570)
AMD Athlon XP2800+ (Barton)
nVidia GeForce III 64mb
1GB Samsung PC3200 400MHz DDR Original [2x512MB] [Checked nVidia site = Compatible]
40gb + 80gb Hard Drives
Sony DVD burner
500wat psu 3.3 - 28 / 5 - 40 / 12 - 17
3 extra fans
2 Cathodes
1 EL Cable
Windows XP pro SP2. [all drivers and Bios are upto date]
Everything works 100%
Sapphire Radeon 9700 Pro... No fans, No lights No DVD and 1 Hard Drive.
Power on... Continuous short BEEPS... Monitor comes on with the message "NO POWER CONNECTED TO RADEON"
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
I have been building my own P.C's for years. Starting with a 386sx, a huge 2mg of ram and Windows 3.11
Everything is connected as it should be.

Quote
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
that is suggesting to me either your PSU is failing, or it is a Poor PSU with over-optimistic amp ratings (eg Q-Tec). it will all appear to work fine on your older board, as that has lower power requirements, have a look in my sticky Is your problem caused by your PSU? for more info and advice.
Quote
Could people please read the entire post and NOT just the title.
that was a bit rude. people try to help by asking questions and giving suggestions. making responses like that is more likely to make people ignore this topic. Please read and comply with the Forum Rules.

K7N2 Delta-ILSR Agp conflicts

hi all
just regestard NEW BEE
just got k7n2 delta-ilsr
got all set up BUT, i had to use old graphics card to install Xp pro then put my primary graphics card in (phrophet 4500 64mb) in started up system and in devices of motherboard the pci to agp recources were all full up and dont work so the graphics card doesnt work, any ideas ??????
ps I'll have to get uptodate driver for graphics card.

Hi,
Killy your score's not bad at all! I'm more used to 3D Mark2001SE scores but yours seem very reasonable. I get about 1,600 on 3DMark03 and I run most recent (3D games) without problem (a little slowing down here and there) but your score is nearly 3 times mine! - Quite respectable!
Axel

OCing 2500+ K7N2 Delta-L (which bios to use)

i wanna OC my cpu 2500+ to 3200+, my bios is the default i think, cuz i never changed it.
my system
amd 2500+ XP barton
k7n2 delta-L
2x256Mb ddr400 twinmos
20Gb 5400rom maxtor
40Gb 7200rpm Maxtor
160Gb 7200rpm Samsung
370W
Gigabyte 9600Pro 128Mb
52x24x52 cdrw
120mm fan, 2x80mm fan, stock cooler for my cpu
hmm so jo think my PSu can still handle OCing? i got 50+ ultra bright red LEDs running too (@ 2.3Volts each)

well the cpu temp stay in 40-55 degrees celcius and case temp 20-35C
i run 3dmark03 with no hangs and stuff
however on Aquamark3 i only get a score of 21826
DATE: 2004-12-11 04:18:11 Set this Measurement to be public. Delete this measurement
CPU: AMD Athlon(tm) XP 3200+ CR: 2186 MHz SRAM: 512 MB OS: Microsoft Windows XP
GFX: GIGABYTE RADEON 9600 PRO CM: 398 / 297 MHz VRAM: 115 MB DRIVER: 6.14.10.6467
# 1 AquaMark Score: 21826 (CPU: 4611, GFX: 2868) FPS: 21.83 TPS: 6570 K Compare
RES: 1024x768 x 32bit AA: Off AF: 4x DETAILS: Very High View
DATE: 2004-11-29 11:32:32 Set this Measurement to be private. Delete this measurement
CPU: AMD Athlon(tm) XP 2500+ CR: 1819 MHz SRAM: 512 MB OS: Microsoft Windows XP
GFX: GIGABYTE RADEON 9600 PRO CM: 398 / 297 MHz VRAM: 125 MB DRIVER: 6.14.10.6467
# 1 AquaMark Score: 25538 (CPU: 5803, GFX: 3297) FPS: 25.54 TPS: 7687 K Compare
RES: 1024x768 x 32bit AA: Off AF: 4x DETAILS: Very High View
not really sure why, im thinking of Service Pack 2, ever since i installed SP2 my computer had been running slower than before (installed it 2 days ago cuz i repaired my sindows xp and downloading sp1 would make me go over my monthly bandwdth limit)

MSI K7N2 Delta-ILSR Dead? Help!

Hey all,
Well, the other day I was on my computer playing a game when my mobo fan started making an odd noise (as if switching rpm), so I took off the side of my case and took a look inside. Everything seemed to be functioning properly, then I switched my cpu fan speed via the pci slot speed control. As I switched from High-Medium-Low, I noticed that the fan actually slowed to the point where I could see the blades spinning, at least for a second or so. I found that rather odd, seeing as how I've never seen a fan (especially a cpu fan) slow to the point that I could see the blades spin. Anyway, a couple of hours later, I shut down and went to sleep.
The next day I had my comp on for about maybe 30mins to an hour or so when suddenly I heard an alarm from the computer speaker, so I was like, ":censored:?" since I had never heard it before. It was evidently the temperature warning, which I had set to 70C. So I shut down within 15 seconds and opened up the side of my case.
I noticed that the cpu fan wasn't moving at all (usually I'd open the case in time to see the spin-down). So I turned the computer back on and the fan didn't budge, so I immediately powered down, assuming that the CPU Fan had died. Later on, I hooked the fan itself up to a free power cord in my sister's computer and booted up, along with the speed controller, flipping from medium to high to low without any problems.
I then did screwed the fan back to the heatsink in my comp and booted up. I went into the bios an noticed that the rpm was 8k, which is way too high for my fan (normally 5k). So i began switching from high, medium, to low once again, then I saw that the rpm reader in the bios went to 0. So I looked back in the side of my case and saw that the cpu fan was once again dead. At this point I concluded that it was the fan and was about to order the Volcano 12.
A day later I placed the fan inside my sister's computer on a free cord, yet again, and yet again, it worked fine.
I once again put it in my computer to test and this time it worked fine, even while switching between speeds. Unfortunately, I then noticed that the mobo fan was not moving, then began to move.
Well, I'm guessing now that it's simply the motherboard that has a short, since both the motherboard fan as well as the cpu fan have randomly been dying the past few days. The motherboard fan; however, has switched rpm many times in the past from 5k to 3k.
It could also be a PSU problem, but I have Antec 400watt psu and it's been working fine for the past 2 years, so I doubt it. I've had the motherboard for a little over a year. I upgraded my cpu from 2200+ to 3000+ in July. That's also when I bought the cpu fan. The motherboard fan began fluctuating in rpm noticeably back in April or May of this year.
Yesterday, I used the computer again and had it on for about 2 hours or so and I had speedfan monitoring the temps and the rpm. The temps stayed relatively stable: 48 cpu, 44 mobo.
But alas, the RPMs were totally [blame me for the swear filter] up. At one point, both the mobo and cpu fan speeds were reading 0, even though both continued to spin within the case and the temps remained the same. Then after 30mins or so, they cpu fan began reading again at 40,000-42,000rpm, which is obviously incorrect, seeing as the fan is rated for around 5k. I got/get the same readings in the bios, both fans reading at 0rpm as they continue to physically spin.
Also, during a number of times that I've started up the comp within the past few days, the motherboard northbridge fan wasn't spinning at all and didn't begin to until a few minutes into my windows session.
Also, I took out the NB fan and noticed a slight crack in the back of it.
I was considering simply just buying the Volcano 12 and the MSI K7N2 Delta2 Platinum rather than RMAing the mobo. Then perhaps an Antec 550W psu, if necessary.
Any ideas what I should replace and in which order? And has anybody else encountered any similar problems with this mobo (at least with the mobo rpm, which has been a prob for about 6months on and off)?
I bought the mobo along with a 2200+ in July of 2003. I upgraded the ram from 256 to 512 in April 2004 (which is around the time I started hearing rpm probs with the mobo fan) and I upgraded the cpu in July of 2004
Many Thanks!
My Specs are as follows:
Windows XP Professional SP1
Antec SX1040B2 File Server Case
400watt Antec PSU
MSI K7N2 Delta-ILSR
AMD Athlon XP 3000+ (2.17GHz)
Thermaltake TR2 M2 HSF
Kingston 256MB of PC2700 DDR-333MHz RAM
Generic 256MB of PC2700 DDR-333MHz RAM
ATI All-In-Wonder 9800 Pro
Sound Blaster Audigy 2ZS Platinum
Pioneer 10x DVD Drive
Sony 8x Double Layer DVD-+RW
Western Digital 120.0GB 7200RPM HD ATA/100
Western Digital 120.0GB 7200RPM HD ATA/100
nForce Ethernet Adapter w/Cable line
Logitech MX500 Optical Mouse
Logitech Elite Keyboard
19" Envision Monitor EN985e
Logitech Z-680 5.1 Speakers

Could be a fluctuating PSU that's breaking down power to the MB. You have a whole lot of components dragging that PSU down. With what you have in your rig I would run either an Antec or Enermax 550W. Best way to be sure is to borrow a PSU or buy one from a store with a good return policy so that you can return it if indeed it turns out to be the MB. If I don't have your board here on my bench to test the only thing I can suggest to you is to swap out components unfortunately.

Problem with K7N2 Delta-ILSR, please help

First off, these are the specs for the computer to which I shall be referring in this post:
K7N2 Delta-ILSR
AMD 2700+
1x512MB PC3200 Memory Corsair CM64SD512
Seagate Barracuda 80GB 7200RPM SATA ST380013AS
ATI 9600 Pro
400 Watt power supply
Cendyne 52x cd burner
Here's what happened. I installed everything with only minor difficulties, mostly due to getting the hard drive to work. They were worked through with little problem due, in large part, to this forum. I installed Windows XP, and we ran a number of things with no problem after the OS installation. The drivers for the video card loaded well. 3DMark2003 ran beautifully. After I got that working, I went to put my friend's old hard drive in as a slave, so he could get the files off of it. This seemed to work well enough. Then we went to load the drivers for the motherboard. When it got to the audio driver, we got the old "blue screen". Then the computer reset and tried booting 98 from the old hard drive. We shut down and disconnected the old hard drive. Then we restarted to find that after the second screen XP would not begin to boot. After some playing around we decided it best to reinstall, because with no combination could we get the OS to boot up. So we reinstalled, with a full format. This time, the first thing I went for was the motherboard drivers. It stopped at the audio driver, again, and gave us the old "blue screen", again. This time, instead of stopping the boot after the second screen, it came up with this message
Windows could not start because the following file is missing or corrupt:
\system32\hal.dll.
Please re-install a copy of the above file.
Any suggestions would be greatly appreciated before we decide what to do next. Please let me know if any more information is required. None of the bios settings have been altered, save to boot from the CD.
Thank you,
M.Cordier

i would test ram
http://www.memtest86.com
and go to drive makers site and get their testing utility
other possibility is a crap psu like them qtecs

Two dead K7N2 Delta-ilsr's..

Greetings...
I seem to have the same probles with this board a LOT of others do...
EXCEPT for the fact eventually the board dies(?)
Just winks out...power goes off...restart evokes a one second blink of power,
then the power switch does nothing...unplug...plug in, hit the power, BLINK, dead...repeat...same results...
reset cmos...remove cmos battery...restart?
BLINK...nothing.
strip board of everything one piece at a time down to mobo vid card cpu memory heatsink/fan...reassemble one piece at a time...
same result.
help.
(Tried other vid cards...checked all pins and connections everywhere...everything works fine in other machines)
Ski
antec true 500 (ok other machine voltages good)
3200xp (ok other machine)
k7n2delta-ilsr (second one, lasted a couplea days longer than the first)
thermalright slk-900/92m vantec tornado (temps good)
2x512 kingmax pc3500 sveral different timings and voltages (single channel, tests OK in other machine)

Tried it outa the case...its outa the case right now.
first board died after a day, second died after 4 days.
ALMOST had everything loaded on the second,
ran 3dmark2001se several times to check temps and performance
and was satisfied...checking my e-mail, BLINK...like the power went out, just like the first one...arrgh. Best 3dmark score was 15,241, BTW...
NO apparent physical damage...if I pull the power cord and stick it back in, I can get it to BLINK once, fans and drives power up for a second.
pulled the vid card and stuck it in this lil KM2M combo,
gonna put the gig of DDR in here too while I'm waiting for a new board...
RMA tomorrow, only I DON'T want to waste any more time
on what amounts to only the SECOND problem of a couplea dozen or so boards I've installed in the last 7 years...last bad board was a shuttle socket 7, BTW...
2 in a row, me and the K7N2 Delta are finished.
Still like to know if anybody else can come up with possible answers,
might help somebody else...LOL!

MSi K7N2 Delta-L + 320Gb hard drive - does it work?

So. My old hard drives have became malfunctional after long career and now it's time to buy new ones. The best price/Gb is now in 320Gb ATA disks so I'm turning to them.
The question goes..does my mainboard support those hard disks? I've done the upgrade to the latest but I'm not sure if the mainboard is capable of handling this big hard drives.
Is this hard drive size too big or can the k7n2 delta-l handle them?

..Running Windows Vista Ultimate Edition Beta and winxp pro sp2 so no probs
Oh ok, here's full specs of my oldie:
Mobo: K7N2 Delta-L with newest bios
CPU: AMD XP 3000+
Antec medium tower + Antec 450W power supply
Memory: 2x512Mb Apacer DDR333 CL3 @ Dual-channel
2 (had 4, 2 died in past 4 months, more going soon) oldish, crappy maxtor hdd's 80 + 120 Gb's with Adaptec ATA RAID 1200A Controller (JBOD configuration) + 1x120Gb WD Caviar
Ati Radeon 9600XT 256 Mb
SB Live! 5.1 Platinum
LG DVD+/-RW drive, (non-dual layer)
Lite-On 52x cDRW drive
Toshiba 12x DVD-ROM
Dell 19" Flat-screen CRT (á la Sony)

Weird K7N2 Delta (or sth) problem...

Hi all, I'll be quick because I need an answer to my problem as soon as I can...
Today I switched my old Albatron KM18G-Pro with an MSI K7N2 Delta-L, because I had problems with a heatsink on Albatron's Micro ATX mobo...
Ever since I did that, 3dmark01 score has gone at about 1000 (from 13200 to 12100) down, using the exact same drivers for VGA (Triplex Millenium Silver Ti4800SEV 128MB) mobo (nForce drivers v2.03 or 2.45 doesn't matter...). I can see that all tests from approximatelly Nature test and beyond are running choppy. I'm seeing choppy gameplay on screen but the fps on Nature seem correct. My refresh rate is set at the same rate as it was before (75Hz on my Eizo LCD 15" monitor). Fill rate runs too much choppily though the score must be correct. Tried switching to 4x mode but nothing happened. I'm really frustrated here guys so please help me...
ps. sorry for my bad english but I was in a hurry...

hi and welcome to this forum.
the score is not interesting and dont really say much.
whats interesting is how it works in games.
tried any games?
new install of xp?
irq conflicts ?
bye

Another K7N2 Delta reset issue

After having a good look through the forum today I believe this will be an all too familiar issue.
Recently purchased K7N2 Delta (not the ILSR) along with XP 2500 Barton and 512mb PC3200 Kingston RAM. Put all of the kit together with no real problems (apart from the frightening ammount of pressure I had to apply to the Aero 7 screwdriver clip to get it to lock onto the mount). Installed Windows XP Pro SP1 with no problems installed all of the updated drivers with the MSI update util and installed the most recent certified driver for the vid card from Nvidia homepage.
PC booted OK changed FSB to 166 in order to recognise the XP2500 installed MSI CPU monitoring software. CPU temp in BIOS around 38C, and from software approx 40C (idle). All looked great!
However, I then installed No One Lives Forever 2 set all the details to high (OK on my old PIII 700) and when I attepmted to run the game PC reset itself (as if the reset button has been pressed). Tried it again on low detail setting the game ran for a bit longer (approx 1 min) and then reset again.
An error is reported in the Event log (event ID 1003 source system error) I have checked this on Technet and it appears to be a generic hardware error.
So I think it may be 1 of 3 things.
1. Cr@p PSU (I will add the details below)
2. Dodgy/incompatible memory (I have heard that the Kingston can be a bit hit and miss with this chipset.
3. Overheating CPU. I was a little bit stingy when applying the Coolermaster Premium Thermal paste, but all of the monitors a reporting that the CPU is relatively cool.
Details of the PSU are as follows..
Eagle 350W. Mod DR-b350ATX (supplied with case)
+3.3v - 28a
+5v - 35a
+12v - 16a
-5v - 0.3a - 1.5w
-12v - 0.8a - 9.6w
+5vsb - 2a - 10w
I am leaning towards a weedy PSU but some advice would be great! Thankyou for your time.
IllPhil.

Right. Ive just checked the cooler and it appears to be mounted the right way round (clip on the outside of the Motherboard and looks flush with the cpu).
I did however change the FSB/DRAM ratio from By SPD to 1:1 and this appears to have done the trick. POST now reports 'DRAM clock for DDR 333' and NOLF2 loaded with highest detail settings and played without a hitch for about 1/2 hour. Also tested OK with BurnTest and 3dMark2003 (p!ss poor score of 1699 though but ill have to tinker with the driver and maybe overclock a bit to get that up). So it looks like you hit the nail on the head their Wonk. Could you recommend some stress testing software I could try so I can give it a good soak test?
Oh and I almost forgot the PSU combined wattage figures are 200w, 192w and 330w.
Thanks again.
IllPhil

Help with k7n2 delta-islr

I am thinking about purchasing the cyclone bundle from allstarshop.com
It comes with the msi k7n2 delta-Islr nforce2 ultra 400
With the athalon xp 2500+ barton
512 kingston ddr 400 pc3200 cl 2.5
ati radeon 9500 pro 128k 8x agp.
I will be running windows xp pro
Will this all work together seems the msi board has lots of issues?
Thanks for any help.

Quote
Originally posted by ally68
I am not that concerned with bench marks as I do not play alot to games. I guess what I am asking is the fx cards more compatible also if I do get kingston ddr400 should I get 2 256 stcks or one 512 stick?
For video the TI4600 would be fine and is more reasonably prices. As far as RAM Kingston is not on the approved list, like I said it may work fine or you may have problems depending on the chipset, but no matter what type of RAM you buy you definetly want to buy 2 X 256MHz so you can run dual channel.
Rob

Another help request for K7N2-delta

I was trying to overclock my memory and when my system rebooted after saving my settings in the bios, I just get a black screen. On the D-bracket, the top two are red and hangs there, which, according to the manual, means that either my processor is damaged or not installed properly.
I tried rebooting in safe mode by changing my J10 jumper and clearing the cmos but to no avail. Could I have damaged my CPU just by changing a setting?
Specs:
CPU: AMD Athlon Barton 2500+
Motherboard: K7N2 Delta-ILSR
Video card: Saphire Radeon 9600 Pro 256 mb AGP
RAM: Corsair Value Select, PC2700, 256mb, 512 mb, and 1 gb of RAM.
Hard drive 1 & 2: Seagate, 120gb, ATA100
Hard drive 3: Western Digital, 500gb, ATA100
Windows XP SP2
Powersupply: Antec TruePower, 430w (3.3v/28a, 5v/36a, 12v/20a)

Quote from: Stu on 18-February-08, 02:21:22
Guys, the Insert key reset was for the K7N2-Delta2 series, which didn't have the safemode FSB jumper, it does not apply to the K7N2 Delta
You're asking for trouble by a) using cheap value-branded RAM, and b) mixing sticks of different sizes
Also you always get best results by running memory clock at same speed as CPU FSB clock.
Take out all the sticks of RAM and have just one installed, then see if it will start up again
I read a review of how well this memory overclocks, so I thought I'd give it a shot. Also, the value-brand for Corsair is rated just under their XMS series; it's solid as far as I can tell.
Anywho, I've always had the 256mb one in the slot ever since the incident anyways. Thanks for the warning, I never knew mixing different sizes had negative effects.
Quote from: Maxwell Smart on 18-February-08, 02:18:35
I own this board... it's not the insert key, but rather the delete key... so yes, as soon as your pc boots up, hit the delete key repeatedly (or hold it down) and then it will let you go into the BIOS.
I'll try that once I get home. Thanks for the info!
Quote from: HenryW on 18-February-08, 03:01:23
"I was trying to overclock my memory..."
There is a miss-print in your manual for the CPU D-LED, I had the same in my K7N2G-ILSR manual.
So it's stuck at the hard drive or at the system power on? I'm assuming the latter since my hard drive shouldn't be having any problems.
Yea, I don't know what I was thinking when I decided to try this. This is what I get for it, I guess.

K7N2 Delta: frequent Tone freeze

Quick Overview of system
K7N2 Delta
400 Watt power supply
2500+ Barton
512 Pc 2700
128 radeon 9500 pro
Audigy 2 ZS
The problem started when i realized that the motherboard i bought didn't support the 4.1(5.1). I needed the higher end version. So i go out and buy a sound card (one listed above) that does support it and it started just to lock up with a high pitched squeal after a random period of time. The squeal happens in anything with sound (music games etc.)
Total lockup. I've tried everything. reformats with new drivers on sound cards and the motherboard. Im stumped. Any had a similar problem and fixed it?
-Thanks

The K7N2 Delta does have support for 5.1. But there is a better audio driver than the nforce one to enable this feature. Just download it at Realtek site:
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
Maybe you could change this audigy 2 you bought for something else more usefull.

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

Best 3DMARK03 Score of 9500 pro + K7N2-Delta L combo?

Similar Messages

Maybe you are looking for