Best Adobe Captivate Screen Size for all Devices?

Which would you say is the best screen size to use to cater for all device types (pc, laptop, tablet, mobile, etc.)?
Thanks.

Hi there,
You can select any moderate screen size and publish the course and on the publish dialog box, check "Scalable HTML content" (only in case of .swf, HTML5 and PDF).
If you are not sure about which screen size to choose and you are creating a course for large audience for devices and systems of different resolution, then 800 X 600 is recommended.
But now, with scalable HTML content checked, your course window will fit to the screen size of the device, and there will not be any scroll bar.
Thanks.

Similar Messages

Changing screen size for screen sharing

Is there a way to change the screen size for screen sharing?
I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
Thanks,
Rob

Well, the question should really have been, "What is the ideal page width for the iPad?".
The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
Something like this...
Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

HT201251 I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
Here is a pic

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

Script to "Reset size" for all images in a RoboHelp project

New UI. Quick fix to pull new screenshots is hampered by the size constraints of graphics.
Is there a (third party or built in) script that will reset size for all the images in a RoboHelp HTML project?
RH8, RoboHelpHTML bulished as WebHelp.
PS the filter in Adobe Forums doesn't allow me to limit the search to RoboHelp HTML and WebHelp; I don't have any other Adobe products, so all the hits don't apply.

Thanks for this script!
What needs to be done to convert a .jsx into an .exe executable that I can add to the RH Toolbox (pod) and run it in a project on my terms, rather than import into the project so it runs (whenever I compile?)
What is the ReSize tool for that already exists in the toolbox?

Why screen size for iPhone simulator is still 480x320 pixels?

Hi,
I just upgraded my xcode to 4.2.1 so I have iOS SDK 5.0 now. However, when I create a project, the screen size in simulator for iPhone is 480x320 pixels. I was told the screen size for iPhone/iPad is now 960x640 pixels. Why in simulator it is still old size? What should I do to get the correct size or I am wrong and the actual device is still 480x320 pixels? Thanks.
Regards,
Taizhi

hi,
you change between "iPhone" and "iPhone retina" to simulate both physical resolutions.
For the project it doesn't matter because the logical resolution is still 320 x 460 "Points". The OS does most of the work for you.
I suggest reading: this: http://developer.apple.com/library/ios/#documentation/2DDrawing/Conceptual/Drawi ngPrintingiOS/SupportingHiResScreens/SupportingHiResScreens.html#//apple_ref/doc /uid/TP40010156-CH15
Dirk

How to block a website (for all devices) on an EA6900

I'm trying to figure out how to block a website for all devices connected to my router. The only thing I can find is blocking websites by device. Please tell me that they did not take this feature away.

welcome to the 'smart' world. I think one of the best improvements Belkin could do is to give us back the option of the old gui. so much more useful.

Running adobe captivate keeps asking for flash even though its already installed

running adobe captivate keeps asking for flash even though its already installed

iTunes will ask you to enter your password when buying songs for each browsing "session". This wouldn't explain why you are being asked to enter it every 3 minutes though.
I would suggest logging out of your Apple ID on iTunes and logging back in. Also, you may verify that your computer is "Authorized" for use with your iTunes content.
To do this on a Mac, go to the "Store" tab at the top of the screen and click "Authorize this Computer"

How can I create a magazine web app for all devices?

How can I create a magazine web app for all devices?

magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

Developing and using Adobe AIR native extensions for Android devices

I was using this tutorial:
"Developing and using Adobe AIR native extensions for Android devices"
http://www.adobe.com/devnet/air/articles/ane-android-devices.html
When packing the Flex mobile ANESampleTest to deploy on an Android device, the below error happens
Error occurred while packaging the application:
aapt tool failed:invalid resource directory name: /private/var/folders/k8/1thhvkf92h947n_g22hg_v9m0000gn/T/52ba05aa-9001-4d46-9438-db81ef83 06f0/res/drawable-xxhdpi
invalid resource directory name: /private/var/folders/k8/1thhvkf92h947n_g22hg_v9m0000gn/T/52ba05aa-9001-4d46-9438-db81ef83 06f0/res/values-sw600dp
invalid resource directory name: /private/var/folders/k8/1thhvkf92h947n_g22hg_v9m0000gn/T/52ba05aa-9001-4d46-9438-db81ef83 06f0/res/values-sw720dp-lan
Does anyone know what the issue might be?

Did you find a workaround for the Error? I'm getting the same and I can't seem to find any solution.

Java script issue on screen rendering for all-11-otn4.js

Hello,
I am getting java error on screen rendering for all-11-otn4.js line no 12277 and 16073. The java script error I get is, *"A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in debugger, or let the script continue"*. After this page stops responding, i have to close the browser and reopen it.
I have a table inside my screen. The table is added inside a af:panelCollection and have few toolbar buttons added inside the secondayToolbar facet. This error is commng due to the table toolbar buttons.
When i check the java scirpt using debugger, it stops at following java script at the bold line,
AdfUIComponent.prototype.getParent= function()
var x147=this._parent;
if (x147===undefined)
var x148=this._peer;
if (x148!=null)
x147=x148.getComponentParent(this);
this._parent=x147;
return x147;
Any idean why this could be happening and any ways to tackel it?
- Sujay

Hi,
did you try with a production build. Sems to me that you use Technology Preview, which is almost 2 years old
Frank

Why isn't there a mobile version / screen size for apple support communities ?

Why isn't there a mobile version / screen size for apple support communities ?

GOD!
I have the same problem and I've been trying to find a way around it for about...4 hours now. It's driving me nuts!
Is there anything that can be done? Can I really not use the nano b/c of my operating system? that seems nuts to me!
am totally bummed out as mine was a gift as well and now I have to return it...

Merging 2 apple id's in family for all devices

Is there an easy way to merge 2 different apple id's in the same family for all devices & iCloud?

No

LMS 4.1 shows "No records" for all devices

Hello everyone,
One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
Also see attached screenshot:
I would really appreciate your advise on this issue.

hello Daniel,
you are getting syslogs but they are getting filtered .
go to >>
Admin > Network > Notification and Action Settings > Syslog Message Filters
and change the filter settings . Try >> KEEP and Enabled combination. after changing settings check the syslogs collector status , Keep an Eye on the Forwarded column, you should see counts in it instead of zero .
you might need to play with filter settings to get this worked.
This is how Filters works:
Scenario 1:
All filters are disabled. Mode:Keep (Like in Our case with
Disabled the LINKUPDOWN and Mode is Keep .so all the messages for that
LINKUP DOWN will be only Forward)
All messages will be forwarded.
Scenario 2:
All filters are disabled. Mode:Drop
All messages will be filtered.
Scenario 3:
Atleast one filter is enabled. Mode:Keep
Only those syslog messages that satisfy the enabled filters will be
forwarded and all others will be filtered.
Scenario 4:
Atleast one filter is enabled. Mode:Drop
Only those syslog messages that satisfy the enabled filters will be filtered
and all others will be forwarded
Thanks-
Afroz
[Do rate the useful post]

LMS 4: VLAN config fetch failing for all devices

LMS 4.0.1, standalone on W2K8 R2, new install
Vlan config fetch is failing for all devices. If I attempt to put a vlan.dat file in tftpboot and then manually copy a vlan.dat file from a device, the following is returned:
TFTP: error code 2 received - 16739
%Error opening tftp://server_name/vlan.dat (Permission denied)
The Windows application logs ont the server log this:
Log Name:      Application
Source:        CRMtftp
Date:          6/15/2011 2:07:49 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server_name
Description:
GetEffectiveRightsFromAcl failed: Overlapped I/O operation is in progress.
(997)
I tried restarting crmtftp, but no luck. Any ideas what may be causing this?
-Jeff

I have the same issue with a freshly installed 4.2 version now:
Log Name:      Application
Source:        CRMtftp
Date:          2/24/2012 12:30:50 PM
Event ID:      3
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      srvwienlms.nts.local
Description:
GetNamedSecurityInfo failed failed: The operation completed successfully.
(0)
I will also open a TAC case, lets see if we still have to stick with a3.x TFTP binary...
br.herwig

Best Adobe Captivate Screen Size for all Devices?

Similar Messages

Maybe you are looking for