Best agp card for k7n2 delta ilsr

Hi again folks
I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

I notice your talking in £'s so I assume your located in the UK. 
Have a look around overclockers.co.uk
For a sub £100 I noticed a good offer:
HIS ATI Radeon 9800 Pro - £82
Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one 

Similar Messages

  • AGP Setup For k7n2 delta ilsr

    I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

    Hi,
    No, leave it at 64 or 128.
    Go here for an explanation:
    http://www.rojakpot.com/default.aspx?location=7&var1=18
    Then - Click on:  "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
    Axel  

  • Need help with jumper settings for k7n2 delta ilsr

    I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
    Thanks, Ron.

    Hi,
    As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
    Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
    Axel  

  • Kingston HyperX Memory for K7N2 Delta-ILSR

    Hey will my K7N2 Delta-ILSR support the Kingston HyperX serises DDR400-512MB Ram?
    Im looking to buy 2 maybe 3 of these and really want to be sure theyll work.
    http://www.ec.kingston.com/shop/partsinfo.asp?ktcpartno=KHX3200A/256&promo=hx2shp
    I checked the supported ram list for the K7N2 Delta-ILSR  and they wernt on there so i just figured it may be out of date?
    So thanx in Advance for info!
    p.s. It will support 3x 512MB right?

    Has anyone noticed how the Hyper X went from the poor-man's Corsair to being priced equal to OCZ, and usually higher then Geil, as well as usually being very close to Corsair, if not the same? I think only Mushkin beats it out now price-wise...

  • New Modded BIOS for K7N2 Delta ILSR

    MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
    download here:

     Description: Access through interface which is on insecure interfaces list detected. Request aborted.
    Interface/Client IP address:
     Date: Wed, 18 May 2005 13:11:17 GMT
    Doesn't work for me 
    By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
    EDIT: Thanks it's working now 

  • Case Recommendation for K7N2 Delta-ILSR

    Greetings,
    I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb.  By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb.  My eyesight isn't as sharp so hooking up those one wire at a time is tediuous.  Not to mention the lack of starndards   Does anyone know if this is address on the next rev of mb's (with pcix etc).
    Thanks

    Brazos,
    I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
    If you want a good case at a cheap price, then go with the SLK3700AMB:
    If you want a good high end case, then go with the Sonata:
    If weight is an issue, then go with the Super Lanboy:
    Take Care,
    Richard

  • Warranty Length for K7N2 Delta-ILSR

    What is the mfg's warranty length on the K7N2 Delta-ILSR?
    I filled out the online support form earlier today but no response as of yet, and me being the impatient rascal I am, I didn't want to wonder all weekend. I bought it October, 2003 and the floppy drive controller seems to have gone out.
    Thanks!
    HH

    Thank you, Glenn!
    Looks like mine is 2 yrs. & 4 months old. Kind of stinks that I lost 5 months on the warranty by going by the mfg. date instead of date of purchase. Its not worth the hassle & would even cost more to RMA it for the controller. Ahh, but this is IT, the "World of Workarounds". I'll live!
    Thanks for your time, Glenn! 
    HH

  • Temperature reading for K7N2 Delta ILSR

    I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
     I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
     How can this by possible?

    I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.  

  • Anyone help - need I/O plate for K7N2 Delta ILSR??

    I'm based in the UK but will pay P&P worldwide........
    cheers
    D.

    Good luck!
    http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
    Edit: If applicable:
    http://www.mycableshop.com/sku/ATXBACKPLATE.htm

  • Linux for K7N2 Delta-ILSR

    Hello,
    Does anyone know of with Linux distro is compatible with the K7N2 Delta Series?
    Sincerely, Deft

    Knoppix worked too, even my TvTuner worked.
    Not that I would recommend Knoppix as a solution, I was just playing.
    There is a lot more support for the nvidia kit now.

  • Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

       < i need a replacement heatsink and fan for this fan.  that will fit!          Reason: I want a new one that is quiter, and the original fan in it broke.  I also need to be able to buy these part(s) online.

    Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
    Check it out here:
    http://www.pcabusers.com/reviews/iceberg/p1.html

  • G4Ti4200-VTD64 voltage incompatibility with MSI K7N2 Delta-ILSR??

    Hello,
        I have the MSI G4Ti4200-VTD64 (4X) video card..  I want to upgrade my motherboard to K7N2 Delta-ILSR. Is there any voltage incompatibility?? I heard that new mother boards will support only AGP 1.5V. Is the AGP voltage of K7N2 Delta-ILSR 1.5volts??  Is my video card compatible with this voltage?? I really want to retain my current video card as I am quite satisfied with it and I'm not willing to invest on a new one at the moment. If there is an incompatibility could you suggest another Socket A MB with good performance and SATA RAID support.
    Thanks in advance
    Regards,
    Joseph

    Joseph,
    All 4X Vid Cards work on all 4X and 8X mobos. All 4X mobos work with all 4X and 8X Vid Cards.
    Take Care,
    Richard

  • What is the Best Graphics Card for G4 Gigabit Ethernet?

    Hi, i use my trusty g4 dual 450 at the moment and i cant help but feel sorry for it.
    I think it could do with a bit more ZING
    I was looking though some of the graphics card upgrades avalable and i want to make sure i get the best
    that i can get for it. I thought the ATI Radeon 9800 pro with 128mb vram was the best i could do but lately
    i found better ones that would supposedly work with it.
    Can anybody help out a die-hard G4 fan and say whats the best my mac can handle?
    Oh yea, I want to see if i can manage to play minecraft well/desently on my mac
    and i have my eyes on some 1.6 ghz and 1.8 ghz processors on ebay to help do this, think its a good idea?

    I was hoping japamac would reply first, but...
    See japamacs page here on the best AGP cards for G4s & G5s...
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    You need an AGP 2 x card.

  • TS1935 I have the video card model . What is the best video card for a 1.6GHz PowerPC G5 please?

    Hello
    What is the best (most modern and reliable) video card (AGP) which will work in a 1.6GHz PowerPC G5 (mid 2003)?
    I believe I have ATY,RV350, and according to the attached article, it may be causing video start up problems.
    Thank you
    Adam

    Hi Adam,
    See japamacs page here on the best AGP cards for G4s & G5s...
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    Rated slowest on top, fastest on bottom.
    Though with no power loght & such, I'm not sure that is the problem or not... does the Hard drive(s) spin up?

  • Best Cooler For XP 3000+ on K7N2-Delta ILSR?

    As the title suggests I am looking for a good, high performance Heatsink and Fan for my current XP 3000+ system. I have a K7N2 Delta ILSR mobo. Three Heatsinks I have been looking at are:
    Thermaltake Volcano 12 Extreme
    Thermalright SLK-900A with a Vantec Tornado 92mm fan
    Thermaltake SilentTower - (I think this one requires holes in the Mobo which the K7N2 Delta ILSR doesn't have :( Please correct me if I am wrong).
    I am looking for a high-performance heatsink at an affordable price (max £50) with which I can do some overclocking. Currently I have one of the Zalman ones ( I think it is a CNPS6000-CU) which is insufficient (load temps 66 C).  Help would be much appreciated. Thanks in advance.

    Yeah, i'm looking for a good price vs performance vs noise solution really. Both the Volcano and the Vantec Tornado are really loud, but they seem to perform quite well.

Maybe you are looking for

  • Time capsule problems after installing Lion

    After installing Lion, I need to regularly shut down iMac(Intel) in order to have Time capsule do the next backup. This method allows me to manually back up the automatic function to back up no longer exists. Also unable to connect to the backup disk

  • Problem in Creating Billing Document

    Dear all, I'm doing practice according to course SCM600 - Processes in Sales and Distribution. I tied to create a billing document for a delivery. But in t-code VF01, the processing status of the delivery is "Incorrect". When I tried to save that doc

  • Hi   lsmw

    hi 2 questions 1.  when is lsmw is preferred, when BDC is preferred to migrate data. 2.  could any one pl send me steps to migrate data using LSMW-bapi method, i know direct method, but i do not know bapi method through lsmw. thanx rocky

  • GR55 Report Generation

    Dear Expert, The report group which is created by report painter can not display text correctly after executing it under another language environment by using t-code:GR55, we have to re-generate the report group(Using T- code: GR55 to do the re-gener

  • HT201303 How can I retrieve the answers to my security questions?

    I just got my new iPhone 4S and its asking me to answer the security questions and I any remember what I put.