Best Apple Computer for Video Editing (when you're on a budget)?

I shoot video on a Canon XL2 and edit with Final Cut Express. I am looking to get a more powerful computer to edit as I currently edit on a 2007/8 MacBook with 120GB hard drive. It gets the job done but rendering takes forever and I can tell my MacBook is slowing down. What is the best apple computer for video editing? And, what would you recommend if you're on a budget? iMac? MacBook Pro? Thanks for any and all help.

Well, depending on budget...
Today, this would be my personal choice...
http://store.apple.com/us/configure/MC560LL/A?mco=MTg2OTUwMjQ
(3.33 GHz “Westmere” 12 GB Memory)
http://store.apple.com/us/configure/MC511LL/A?mco=MTg1ODA4MDM
(2.93 GHz “Quad-Core i7” 8 GB Memory)
If portability is an issue...
http://store.apple.com/us/configure/MC024LL/A?mco=MTc0Njg1NzI
(2.8 GHz “Intel-Core i7 ” 8 GB Memory)
Regards
Nolan

Similar Messages

  • What is the best Apple notebook for video editing and pro music creation?

    What is the best Apple notebook for video editing and pro music creation?
    I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

    MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

  • I would like to build a desk top computer for video editing, business management and online learning and also have a small compatible laptop or tablet or ipad to take to university, Can someone please advise me of the best set up for this?

    I would like to build a desktop computer for video editing, business management and online learning and also have a small laptop, tablet or ipad to take to university, Can someone please advise me of the best set up for this?

    Let's see if I understand this...   You're asking for advice on building a desktop computer, in the Apple developer's forum?  Why not just buy a Mac?

  • Computer for Video Editing for the Present and Beyond

    In an earlier post I announced that I have been a Premiere Elements user since Day One, and I also mentioned I was looking to have a new computer built from scratch rather than purchase from Dell or HP. I am close to finalizing that build, and am looking forward to upgrading to Elements 8.0. I am also looking forward to becoming a subscriber to Muvipix.com. Becoming a part of the Adobe Premiere Elements Forum coupled with being an eventual subscriber to Muvipix.com has elevated my enthusiasm for video editing. Special Thanks go to Bill Hunt and Steve Grisetti for anchoring this Adobe Pre E Forum. Your advice has motivated me to take my video editing with Premiere Elements to another level.
    Speaking of advice, what does everyone think of the following specifications for my new computer? Is this a solid computer for video editing? In some cases some components lack specificity (model numbers, brand names, et cetera). Suggestions and comments will be greatly appreciated as I take this final step. Thanks to all!
    ATX Antec     193 Computer Case
    X58 ASUS      Motherboard
    Core      i7- 930 Processor (1366)
    700W     OCZ Power Supply
    Triple     Channel DDR3 (6 GB RAM - 3x2GB)
    64-bit      Windows 7 Home Premium
    (2) Western     Digital 1T HDDs
    22xDVD+/-RW      Burner
    ATI  Radeon 4670 Video Card DDR3 (dual     monitor support)

    jcrystal76 wrote:
    I read your computer spec sheet. Thanks for sharing. You  said the ideal thing to do is use the computer just for video editing.  Best way to go. However, you still need an OS, which requires updates.  And you need to update drivers, and then there are product updates and  add-ons. You need to connect with the Internet to do all of this
    I do not have $$ or space to have 2 computers, so my single computer is for day to day work, and video editing as a hobbyist... which of course is not "ideal" for video editing... but I don't make $$ at this, so I use what I have
    I am still learning about Win7 64bit, so do not have all the startup process optimized... that is my next project, to figure out what does not need to be running, and remove that un-needed stuff from the startup
    You also asked about backup... the IMAGE program I use is mentioned in http://www.pacifier.com/~jtsmith/ADOBE.HTM#SmartOwn
    I make a boot drive image to external USB hard drive before installing any new software

  • What is the best macbook pro for video editing dslr footage?

    what is the best macbook pro for video editing dslr footage?

    It is the GPU that is important.  All the CPU's will be fast enough.  If you can affords it, the 15" with the NVIDIA GPU is the best.
    Ciao.

  • Best display profile for video editing

    Among the choices you see under Display Profile on a Mac, what is considered "best" choice for video editing, so that you can assess color, exposure, etc. in your footage as you edit? I have always used Adobe RGB (1998), but realize that I have no knowledge about whether that's a good choice.
    What do the 'good' editors use (to differentiate them from guys like me)? Do top editors calibrate their monitors for video editing? Any insights into this would be greatly appreciated!
    -- Mark Strand

    what is considered "best" choice for video editing
    there is only one setting for Final Cut; Generic RGB
    This is an apple stipulation, its how Final Cut must be set up, choosing any other profile will cause problems with any out put files you create.
    Do top editors calibrate their monitors for video
    ICC colour management is designed and can only be used for still image files eg. so while you can calibrate a computer monitor it can only be used with still image files; TIFF CRW JPEG PSD. ICC profiles are not recognised by Final Cut Pro or QuickTime.
    The colour management system used in video involves using video scopes, an accurate PAL or NTSC colour monitor and tools like the 3 way colour corrector.

  • Best affordable choice for video editing & other stuff?

    I've been a PC user forever. I'm looking to enter the world of Mac. I do video editing with Adobe CC on a windows 7 Destop PC with an i7 Quadcore and have a nice LED monitor. I'd like a Mac capable of doing graphics well and has the processing power of an i7. I was thinking of a Macbook rather than than a iMac because I don't need the built in screen - I already have a very nice LED monitor. I also like the idea of portability. So I figure i could hook up the Macbook to my LED monitor when at my desk, and then be able to port it around when I wanted to go mobile. Is this reasonable? Is a macbook laptop capable of this kind of processing? I know my HP Powerbook with Win7 struggles doing this kind of stuff even though it has a dedicated nVidea Graphics and is an i7 2.3GHz with 16G memory, so I never use my HP laptop for video editing. I thought about the Mac Pro, but that is WAY out of my budget. Is there a Macbook that would be good for video editing and not break the bank? Like I've said, I'v discounted the idea of getting an iMac because of space & (I already have a decent size LED monitor that I'd like to continue to use and share with my Windows PC.

    the last 2 and the bottom of this link would be more than adequate: http://store.apple.com/us/buy-mac/macbook-pro

  • What is the best set up for video editing?

    What is the best computer? The best software? The best external storage? The best ram? 3D editing? Everything!!!!!!
    Running full HD and 720p at 60 fps videos. Clips ranging from a few seconds to 10-30 minutes.
    Cost isn't an issue.
    What is the best set up, not the most excessive. If it doesn't need to be there or it isn't greatly needed I would like to know. This is looking at the production aspects, not the camera and such. What is the best plug in for slow motion? Pros and Cons of the set up?
    I would greatly appriciate everyones input in this. Thank you so much.

    That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
    A high end windows pc (only cause mac pro hasn't been updated in ages)
    Avid Media Composer with Nitrus DX
    Two monitors
    Broadcast monitor
    HD Deck
    pimping 5.1 speakers
    A good mixer
    You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
    If price is not an issue then there you go....
    However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
    I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
    Have a second monitor..
    I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
    Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
    Be more specific and you will get clearer answers..

  • Best MacBook Pro for video editing

    Any suggestions - I would like to purchase a MacBook Pro but I want to some video editing with it -which is the one to look at?  Thanks

    The best one is the model without the word "Book" in it... 
    You don't say what you want to edit, but in general, editing is a horsepower game so you'll want a lot of RAM, a fast system disk/SSD and the fastest processors and video board available. Don't expect to do much on the battery because all those resources (plus your external media drives) will severely limit your battery life.
    You may also want an external monitor and plan on either USB 3.0 or Thunderbolt external drives for media and scratch storage. The bigger, the better.
    Hope this helps

  • Best Mac configuration for video editing

    I am going to be getting into video editing at work and have about a $6000 budget for the software (Final Cut Studio) and the hardware to do the work on.  I'll be doing short 3-5 minute videos as well as some lengthier 20-30 minute videos. Those of you who have a lot of experience working with FCS, what would be your recommendations for my Mac configuration? Memory, Drive, Storage, etc.  Thanks!

    Buy the best MacPro you can afford.  Go for the best ATi video card that is an option, try to get at least a gig of RAM per CPU core, and don't skimp on your storage.
    At that budget I'd say 8 core 2.4, 12gb RAM, 1tb boot drive, 2x 2tb editing drives, the ATi 5870, and a single 27 inch window.  That comes in at about 5700 without FCS.  The cuts I'd make if that's too much are 8gb RAM and 1 2tb drive for editing to get down to 5100, 6100 with FCS.  If you can wait Final Cut X comes out this summer for about $300.  We don't know a whole lot about it yet, but the better specs with FCX will be a lot faster than the lower specs with FCS.  Whether or not you can wait is a question you need to answer for yourself.
    If you don't need the monitor change your boot drive to the SSD.

  • The best RAID level for video editing that has some form of redundancy?

    I've been asked to help find the best solution for importing and editing large amounts of HDV (25 Mbit/s) video. However, those whom I am helping also want a level of redundancy that will allow a single drive to fail and their data to be preserved. So what I'm trying to figure out is the best RAID level (or levels) for their need. I'm fairly certain that either 0+1 or 10 is what I'm looking for, however the I/O performance differences between 0+1 and 10 aren't quite clear to me. If someone could explain that to me I would appreciate it. Additionally, if someone knows a better level than either 0+1 or 10 for the needs I described, please don't hesitate to let me know.

    The difference between RAID 10 and RAID 0+1 is how the array is created.
    RAID 0+1 creates a RAID from multiple RAID 0 arrays that are mirrored.
    You can tolerate any number of drive failures in any one side of the mirror (that side of the mirror goes offline as soon as any one disk fails, so it doesn't matter how many other disks fail in the same array), but one drive failure on both parts of the mirror will trash your data.
    RAID 10 creates a stripe of multiple RAID 1 mirrors.
    In this setup you create RAID 1 mirror sets and stripe them together.
    In this setup you can tolerate one disk failure in each element of the stripe.
    For example if you have 6 drives you might create three mirrors of two drives each, and each mirror is then striped.
    You can lose one drive in each mirror, but if you lose two drives in any mirror set, you're out of luck.
    In both cases, though, you're not going to get the best usage out of the array since mirroring has a 50% overhead - meaning you're only going to get 50% of your total disk capacity as usable space.
    With the XServe RAID, the RAID 5 performance is very good - good enough for your 25MB/sec throughput so I'd go with RAID 5 arrays, not RAID 0 or 1 on the XServe RAID itself.
    Then, depending on your space requirements, you can either stripe or mirror them together for a RAID 50 or 51 array. In this way you gain the data redundancy of RAID 5 with better disk utilization than 10 or 0+1.
    RAID 50 will give you the best performance (and the most usable space), RAID 51 will give you the best redundancy.
    At the end of the day it's up to you to decide which format to use based on performance and usable space requirements.

  • Best external harddrive for video editing.

    Hey all,
    I'm looking at getting a new external hard drive. I need speed over capacity and wondered what people thought of the g-raid systems?
    Much thanks, mungo.

    I love G-Raid. Nothing but good things to say about them. I had a bad drive... dropped it off at their office in Santa Monica at 9:30am and picked it up same day at 5:45 and I'm just a little guy.
    They did have some issues with power supplies for a short run, but quickly cleared it up. On the Customer Service side, they also got overwhelmed due to rapid growth, but quickly addressed the issue.
    Heck.. they even fixed a client's drive that I dropped off as a courtesy to the client, at no charge, and saved all data. It was 1 year out of warranty. That my friends... is Customer Service at it's finest.
    In my book they are the best. I don't think I'll ever see LaCie, Seagate, Maxtor, or Western Digital provide that kind of top-notch service.
    Sorry you had a bad experience Studio X, but these guys are the cream of the crop in my book.
    Cheers!

  • Best Internal HD for video editing??

    I bought my Mac Pro month ago with only a 250gb HD, i want to buy a new HD to run windows Vista, i have parrallels desktop but it only uses 1gb Ram from my 4gb I have on my system...i use Final Cut Pro as well as Premiere Pro and other Adobe and windows applications that i cant run on a Mac.. so i was thinking of getting a new HD 2 run windows with Bootcamp
    * i dont want to mess with the same HD since windows still have problems with viruses so i want to run both OS in separate HD.
    I want to know what is the best internal HD to run heavy windows applications on my Mac (with Bootcamp) seagate, Maxtor?? plz give me the models and serial#s
    Thanks
    Hansel Jr.
    Mac Pro   Mac OS X (10.4.10)  

    I don't want to mess with the same HD since windows still has problems
    with viruses so I want to run both OS in separate HD.
    There is nothing to stop a Window's virus from formatting a second disk drive, even if it doesn't know how to read or write its file system. It's no harder than wiping out a second partition on the same drive as Windows, so using separate drives is not adding much more protection for OSX against Windows. You just have to trust your virus protection on Windows. Of course, having separate drives does give you the option to unplug the OSX drive before you boot Windows. (Turn off the power first.) It would be nice if SATA drives had a connection for a write disable switch.

  • 13 inch 2.9GHZ MBP or 15 inch 2.3GHZ? for video editing

    Hi, everyone. im looking to buy a new MBP but i don't know which one to buy, the 13 inch 2.9GHZ MBP or 15 inch 2.3GHZ? i will mainly use the computer for video editing and sometime photoshop. i'll be using Adobe Affter effect, and premier. i have a samsung and i think i already had enough of it. it takes me 40-60 min to render a 7 min video and if i have effects from after effects in it, it take even more to render my videos. im thinking about buying the 15 inch mainly beause of the NVIDIA GeForce GT 650M with 512MB of GDDR5 memory. but i don't know if the money is really worth it. i have the budget to buy these computer, so the budget is not a concern, but i still don't want to throw the money around.
    i also been thinking about the 15 Inch 2.6GHZ but i don't see that big of a jump from the 2.3GHZ. BTH forgot to mention i want to buy the non-retina Display MBP
    Which one wold you guys recommend.

    that's an easy answer.
    go with the 15' for what you'll be using it for.  it has it's own discreet graphics.
    the 2.3GHz is better because of the quad core design.  especially true for video editing.
    the 13' will also do what you want but slower because of the built in intel video which is driven by the processor and uses part of the system RAM.
    if you're not worried about speed and are more concerned about portability, then you can stick with the 13'.
    whatever, you decide to buy, you'll be happy with either macbooks.  just make sure you max out the RAM for your purpose.

  • Thinking of Building/Buying a PC for Video Editing?

    If one is thinking of building, or buying a PC for video editing, Harm Millaard has published an ARTICLE in the Adobe Hardware Forum. He has arranged it such that one can rather pick and choose from three levels of system - beginner, intermediate and full-blown advanced pro-level rig. There have been some advances in hardware, since the article was first published, but with the discussions that follow it, much has been updated.
    Harm approaches the computer from the eyes of one using PrPro, but with the exception of the GPU requirements for the Mercury Playback Engine (MPE), PrE will benefit from his suggestions. Be sure to follow all of the links that he offers in that rather longish thread.
    Also see his other NLE PC ARTICLE, and his storage requirements ARTICLE.
    If one is considering a RAID setup, his RAID ARTICLE will prove very useful.
    If one is considering working with external HDD's, then this ARTICLE should be useful.
    Hope that this helps people, who are considering a new computer for video editing.
    Good luck,
    Hunt

    Harm Millaard has written an update to his computer ARTICLE, and there is some good discussion in it, as well.
    Hope that this helps someone.
    Hunt

Maybe you are looking for

  • I want to turn off auto updating on my Mac 10.4.11 How do I do this?

    # Question I want to turn off auto updating on my Mac 10.4.11 How do I do this? When firefox tries to upgrade (without asking) it tends to upset my Mac's usual functioning.

  • How to deactivate schedule line in sales order

    hi friends, how can i deactivate the schedule line in sales order so that we can deliver the sales order after the schedule date. i can uderstand that system is not allowing before schedule date. but what if i want to deliver after that. Thanks in ad

  • Oracle 11g SUM function on the result of inner Select

    The inner Select returns rows with the values. The outer select running on tthe result of inner select SUM the result of the inner select. Although there are valid rows of the inner select the SUM in the outer SELECT return NVL. As a comment any aggr

  • Regarding number of nodes in endeca cluster

    Hi, I have a question regarding number of nodes in the endeca server cluster. Our solution contains one data domain running in a endeca cluster with two nodes. Endeca server documentation recommends to run the cluster with atleast 3 nodes however our

  • Cannot edit Service Requests or Service Offerings in SM Console

    I have been working on a Service Manager deployment for the past few weeks and yesterday I lost the ability to edit a Service Request or Service Offering when going to the Library, highlighting the object and the clicking Properties.  I am using the