Best aproach to zoom in on a clip

What would be the best apporach to zoom on a certain area on a clip? Is there a plugin to do this automaticaly?

There is no need for a plug-in. Each Video Clip automatically has several fixed Effects applied to them. First, Select your Clip, and then click on the Effects tab, choosing Edit Effects (lower-left of that Panel). This will get you to the Effects Control Panel. Look for Motion, and there you will choose Scale to Zoom. You might also want to Pan, and that would be done with Motion>Position.
One can adjust these Effects to be static for the entire Clip, or they can be Keyframed to change over time. To start the Keyframing, you need to toggle ON Animation with the little "stopwatch" icon.
Good luck,
Hunt

Similar Messages

  • Easy way to do smooth motion pan and zoom on a video clip?

    Howdy..
    As a recent convert from Vegas and Premiere Pro, I'm very happy with FCP6, with 1 issue: Easy moves on video clips.
    It's very easy to setup a move with the motion filter, but the problem is that zooming with moving on the clip with 'ease-in' is problematic.
    The scaling and motion seem to accelerate at different rates, making it very tough to achieve a smooth pan and zoom at the same time (either one by itself is easy).
    I've tried using anchor points, but that's difficult when doing several moves on a clip.
    Basically, is there ANY way (either native or via a plug-in) to set up simple pan+zooms on a video clip, with smoothness turned on without having the 'slingshot' effect that you get? I know I can mess around with the acceleration points, but this is tough to do with 100 of clips that need adjusting.
    I'd appreciate any help you can offer..
    Thanks...
    Best,
    Ben

    Howdy...
    Usually I set easy-in/out on the canvas window (for center) and then 'smooth' on the keyframes (for scale) in the motion window.
    Can you actually set smoothing for center in the viewer? I think you can only set easy-in/out for center in the canvas. (could be wrong on this one).
    I wish it worked like in Motion. Much easier and more intuitive, but one shouldn't have to jump to a different app just to do a simple pan and zoom...
    Any other ideas?
    -Ben

  • Different zoom levels for different clips in the same project?

    Hi
    I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
    kind regards
    Soren

    You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
    Using Motion or Scale to Frame Size commands
    Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

  • Zoom in on video clips???

    anyone know of any plugins that allow zooming in on video clips?
    sort of like the ken burns effect for still photos?
    thanks

    http://geethree.com/slick/index.html
    They MIGHT have what you need. Too many to browse today. This is easily done in FCE or FCP. If it is a still shot you might try zooming in in iphoto and adding a disolve between the original and the blow up.

  • Fram junp/zooms on start of clip

    Hi, Yes i 'm looking for help but I think this is a hard one sorry about that.
    Ok I have two tracks of footage where I have a cap between two clip on track 2.
    when I move my player head over the start of a clip I can see on the tv that the fram zoom for that first fram just a little but you see it jerk/zoom just uneven if you have come across this you will know what I mean. I have rended the project but dose not help. any ideas as to what I should do. pleased for your help.
    Trevor

    Hi , And thanks to you all this has not been to get across.
    v2 ------------- --------------- -----------------
    v1 ----------------------------------------------------
    when player head get to the gap start or finish the fram on track v1 moves up or down dosen't hold still as if the start or ed of the gap is making this do this is a strange,it's just at the end fram or the first fram of the gap. I have closed the gaps and it's fine, but as you know it's cheating it shoud't happen. it's not praitcal either.
    Now the same thing happens if you turn the whole thing the other way around.
    I think I saw you had dell montors are you Happy with them?
    I have to invest in 2 products which would you say I should spend most of my hard cash on a screen or a montor.
    It's late and time for bed here in the uk. I thank you for your help may be I can send you a personal mail tomorrow.
    RT is set at unlited and play back at dynamic.
    All the best
    trevor

  • PrE 9, zoom out of a clip?

    im making a video and i want to make the clip start zoomed in, and as it progresses, to zoom out. i know of the zoom out effect, but that remains the same for the entire clip (no motion). i have a transition on it already, so i can't use the zoom transition. are there any other methods to do this on PrE 9?

    Because of the power of Keyframing (not only can you Keyframe the Fixed Effects>Motion>Position and Motion>Scale, but also many other Effects, that you would wish to add), every moment spent learning the ins & outs of Keyframing will pay dividends. Steve does one of the best jobs of explaining Keyframing, that I have seen.
    Also, initially it will seem like a lot of work, but it gets easier, and easier, and the "power" of Keyframing can be "intoxicating!"
    Good luck, and happy Keyframing,
    Hunt

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

  • Zooming in on a clip

    Ok so i dont exactly know how to explain what i want, but is there some way to make the camera zoom in on a part of the film? Like when working with a clip can i have it zoom into the upper left corner of the screen? I tried different things in motion working with 3D but none of it really looked right. Is there some way i can do this in Final Cut Pro 6. Thank you.

    Movement on Stills
    This is pertinent for video too.
    Shane

  • Adobe Premiere Pro CC Timeline automatically zooms in when moving clips around

    This is an issue that keeps happening. It has been an ongoing problem with Premiere Pro CC and now 2014.1. It would start after working for a while on a project and become more frequent as the project gets larger. The only way to rectify the problem is restarting the computer. I would be working and I go to drag a clip around on the timeline and the timeline will automatically zoom in and thus place the clip in the wrong location. This happens when I am not holding down any keys. It will continue to zoom in every time I move any clips on the timeline and once it starts it happens on all sequences. While restarting the computer seems to help I have to do that 5 or more times in a day which can be very frustrating. It doesn't seem to be related to any OS, computer, hard drive/storage. Deleting preview files, flushing PRAM, trashing preferences doesn't help either. I usually work with Quicktime files AppleProRes Codec or H.264. Any help or insight into this issue would be greatly appreciated.
    Here is a video that demonstrates the bug:
    Premiere Pro Version: Every version from 7.0.0 to 8.1
    OS Version: Every version of Mavricks and Yosemite including version 10.10.1
    The footage I most use is H.264 and ProRes 422
    The problem occurs randomly throughout the day, nothing seems to trigger it. When it starts the only way to make it stop is to restart the computer
    Other software running at this particular time is” Mail, Evernote, Safari, OmniFocus, On The Job, Text Expander, Messages, Preview
    No third-party effects or codecs installed.
    Hardware:
    Mac Pro (Late 2013)
    3 GHz 8-Core Intel Xeon 5
    32 GB 1866 MHz DDR3
    AMD FirePro D700 6144 MB.
    No third-party I/O hardware.
    Mercury Playback Engine is turned ON

    Hi Patrick,
    Sorry, I've never seen that. What happens if you do not run any other software launched as you work? If you have time, please file a bug report: http://adobe.ly/ReportBug
    Thanks,
    Kevin

  • Best way to adjust lighting in video clips

    Is there a "best" way to adjust lighting conditions within a video clip?  I have a clip with terrible lighting conditions and cannot reshoot the scenario.
    While I don't expect a perfect solution, I am hoping that there are better approaches than the ones I've been using.  If recommendations include third-party plugins, I would appreciate hearing about them, as well.
    I have been using the gamma corrector and luma corrector filters.  The gamma corrector adjustments in greater values, but seems to only work in discrete steps.  So, if the gamma needs to be stepped up or down within a clip, there is a very visible and sometimes jarring visual effect.  The luma corrector seems to only be able to increase the brightness level (through a combination of all 5 or 6 variables including brightness, gain, gamma, etc.) before the clip looks washed out. 
    Thanks,
    Steve

    All CC and Grading should start with "Levels"
    You could then go into 3-Way Color Correction.
    You could also look at a more powerful CC such as Colorista 2

  • Best way to deal with multi-track clips?

    Hi,
    I'm editing a documentary using pre edited program masters and have been supplied the audio stems. Can anyone recommend the best way to deal with them so I can access any of the tracks within the main edit.
    I've tried creating a compound clip and adding the stems but I only access to a mono track when using the clip in my main project. I've also tried creating a multicam clip but as my stems need to be split and spaced to line up with the main Pro Res file I don't seem to be able to insert slugs into multicam clip.
    Has anyone found an elegant way to do this?
    Many thanks,
    Leigh

    Hi leiski,
    Happy New Year, and Welcome to the Support Communities!
    Compound clips are still the best way to approach this, because you have access to the stems at any time with a double-click. 
    The following resources may provide additional information:
    Audio editing overview
    http://help.apple.com/finalcutpro/mac/10.1/#verdcd1cc1
    Advanced multichannel audio editing
    Final Cut Pro automatically groups channels into audio components according to how the channels are configured for the clip. You can expand the audio portion of clips to reveal and edit audio components down to the individual channel level. This allows you to apply different effects to different components and streamlines the process for making quick sound cutouts to a single microphone input or other fine adjustments. 
    Important:  Many digital audio file formats, such as AAC and MP3, use interleaved stereo files, which do not contain separate left and right channels. These files appear as a single audio component unless you change the clip’s channel configuration. 
    Keep in mind the following when editing audio components in Final Cut Pro:You view and change the audio channel configuration of your clips in the Audio inspector. You can change audio component names, add or remove audio components, and configure channels in mono, stereo, and surround formats. See Configure audio channels.
    Configure Audio Channels
    http://help.apple.com/finalcutpro/mac/10.1/#verc1fab5f6
    Using Roles to organize clips and export audio files
    http://help.apple.com/finalcutpro/mac/10.1/#verc1faa7ce
    Cheers,
    - Judy

  • Is it possible to zoom of pan a clip?

    Before I had my Mac, I used Sony Vegas on Windows, and for pictures (such as slideshows), I could make the picture or clip pan across the screen, or zoom in or out from a certain point. How would I do this on Final Cut Express?
    Thanks

    http://www.fcpbook.com/MotionControl_inFCE.html

  • Best approach for green screen over multiple clips?

    So I know this may fall under the category of after effects, but starting with a project in premiere with many clips and cuts, what would be the best way to apply green screen over all of these clips? I'd think that making all of these clips after effects compositions would be excessive and not the best approach. So is there a better way to go about doing this?

    In these cases it's best that you test with one clip before going all in and having to change direction after much is done.  You can get by with Ultra Key in PPro if the screens are done correctly and clean enough.  Much will also depend on the expected result.  That is, you may wind up doing lots of tweaking for shots that might not pay off if they're quick/action, etc.  I usually go round house for AE involving complex shots that need to be really clean, but have opted for Ultra in PPro for quick clips with action.  When I do use Ultra Key I use more than one instance of the key.   So, test it both ways and use this as an opportunity to know the Pro's of both methods.

  • Need to zoom out to see clips in organiser monitor

    Hi
    I'm working on a project with settings at PAL AVCHD HD1080i 25. When I put a clip on the timeline, it is much too big for the monitor panel. Is there a way to zoom out within the monitor panel so that the whole frame can be seen please?

    Yes. Right-click and select Magnification> Fit
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Zooming out during a clip

    Me again.
    I've shot a video using an autocue and because of this i was unable to zoom out during filming. Using premiere pro how can I can give the effect I'm panning out of the shot to reveal what is on the subjects desk?
    Thanks
    A

    Biggles Lamb wrote:
    Select the clip
    Go into the effects tab and select motion
    There you will be able to scale and move the clip around
    But that will only work if there is more of the clip to reveal when you scale it down or move it. That's unlikely in most cases, so animating motion will only reveal black around the image when you downscale or move it. You'll probably need to re-shoot the footage and zoom out if possible.

Maybe you are looking for

  • How do I use the High Speed Data Logger with multiple I/O devices?

    I am using the High Speed Data Logger vi to read from a 16 channel A/D card (NI PCI-MIO-16E). The project may require more than 16 channels. How can I use High Speed Data Logger to read from two A/D cards? Will it be able to write the data to one fil

  • Did class Double change in 1.5?!! (Or is this a bug?)

    In my mind, if I use Double.valueOf, it has to be like this: String stringValue = "2.0"; Double doubleValue = Double.valueOf(stringValue); However, the 1.5 javac is currently allowing me to use valueOf and cast the answer to a native. double doubleVa

  • Remote...How can you set the your amplifier to be the default volume?

    Does anyone know how to set your amp to be the default volume control without have to switch between devices to change the volume? Can you have 2 devices on the screen at the same time. Like cable box and the amp? i've had other sony remotes that wou

  • Frequent error on feed posting - iTunes server problem?!

    Since last friday iTunes server has a frequent problem accepting feeds for review. I had the same experiences as mentioned before. All the messages in this board point to one thing: iTunes server - mainly error 5002 Can someone of Apples staff PLEASE

  • Photoshop CS5 issues with..everything

    I recently posted a specific question, but it looks like there are more issues then just the original. Basically, I will be using the clone tool and all of a sudden I cannot change the brush size with my wacom tablet. I have to quit and restart Photo