Best ATV-2 settings for ripping DVDs using Handbrake

I have a large dvd library that I want to get into itunes for the ATV-2 as well as the ability to use on my iOS4 devices. Can anyone share their experiences?

If you're talking about commercial, encrypted DVDs, the terms of use of these forums prohibit discussion of software or methods of breaking the encryption/copying them.
For unencrypted DVDs, Handbrake is one of the most recommended applications.
Best of luck.

Similar Messages

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

What are best Mpeg encoder settings for making DVDs?

In switching from PP1.5 to CS3 the procedure is different for making DVDs and we have to encode mpeg files that later get picked up by Encore DVD build proces. What are the best mpeg encode settings for making the DVDs?
Thanks,
Chuck Taylor

Question:
If you are doing a video that is small enough that you are not worried about size, what is the absolute best quality encoder settings? Would a Continous Bitrate result in a higher quality file generally? VBR is for trying to make a smaller file I assume.
I'm frustrated with even white letters on black titles that have some flicker. I just don't seem to get the smooth quality I desire.
Should I look at a different encoder?
If you output PP3 to an AVI and then import it into encore, isn't there a reduction of Q. due to the save to the AVI file?
thanks.

AVCHD best output option settings for standard DVD

I just purchased a sony HDR-SR5 and was wondering the best settings options to make a standard DVD from an AVCHD source. Plus I would like to keep it letterbox.
Thanks and Happy Holidays!
dp

Export to QuickTime Movie and take it to iDVD.

Ripping dvds to handbrake and editing in FCE

I am trying to rip DVDs using Handbrake and edit them in FCE. I am not sure which settings to use in Handbrake to ensure the ability to open the file in FCE. I ripped an hour long DVD to an AVI file which took 9 1/2 hrs., but when I tried to open the file it was empty. I also tried MacTheRipper, but FCE won't work with MPEG 4 files.
I'm not sure what Codecs are in Handbrake, but there are 4 options and I'm not sure which is the correct one to select (MPEG-4 video/ MP3 Audio, MPEG-4 Video/AC-3 Audio, AVC/H.264 Video/MP3 Audio, or AVC/H.264 Video/AC-3 Audio).
How can I make this work? I'm unfamiliar with most of the different setting options as a whole in Handbrake.
Please advise.
iBook G4 Mac OS X (10.4)

DVxDVD will convert your MPEG2 files(DVD) to DV files that work in FCE. It is not a free program, but it is fairly cheap (around 40 bucks Cdn I think)
Another way to go is hook a DVD player up to your Cam via analog cables and hook the Cam to the puter via Firewire and capture that
When ripping, even with a solid program like DVxDVD, there will be some quality loss, especially if you are going back to DVD at the end
MPEG Streamclip is a free program that can do what you want but you need the Apple MPEG-2 Playback component which you can purchase (around 30 bucks Cdn) on this website

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

What are the best settings for ripping cd's in the AAC format?

I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

mysteryroach wrote:
My questions are: What are the best settings for ripping cd's in the AAC format?
It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
Yes. Just put them in a playlist and burn.
Does the AAC format have VBR like the MP3 format?
Yes. You will see it as an option in the Import Settings.
Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

Best settings for older dvd players

anyone have any recommendations on bit rate or other compression settings for older dvd players? everything i produce plays fine on my personal dvd player that actually says dvd-r on the front, but i continuously have problems with clients players having pixel issues of freezing up. i've tried lower bit rates and such but i'd rather not go into all the different angles and just see what you guys say.
I can't be the only person out there that has clients with cheapo players!
thanks in advance.

I don't think you are going to find a single solution to this problem. Just about every DVD player is going to have problems with some brands or types of recordable DVDs. Some things to consider or try:
1.) Educate your customers about potential DVD media problems. Potentially tricky since not everyone will freely admit or accept that such problems exist.
2.) Burn the DVD at the lowest possible rate (burn at 1X rather than 4X, etc.).
3.) Try a different brand of DVD-R.
4.) In special cases consider using DVD-RW rather than DVD-R (some older players will actually work better with DVD-RW).
5.) Consider using the best possible DVD recorder (I'd recommend Plextor drives mated with Roxio's Toast software).
6.) Use a commercial DVD mastering service (only practical if you want to duplicate several hundred discs -- too costly for small runs).

Best custom video settings for QT on iPod

What are the best Custom video settings for creating a QT video via iMovie for use with the iPod? That is to say, I want to d/l from a Camcorder and then convert that to Quicktime...ultimately to be played on the iPod.
Thanks,
Lyman

Larry,
Try performing a Google search of world of warcraft mac graphics settings. With the popularity of the game, you'll get quite a few hits, One such hit is:
http://www.xlr8yourmac.com/games/macwowperformance.html
Steve

Best in-Aperture settings for iPad

Hi,
Does anyone know what is the best in-Aperture settings for optimum iPad photo quality ? (Maybe able to do a 2x zoom without pixelating)
Currently my previews are set to *"Fit within 2560x2560"* and Quality is set to *"10 High"*
However, in this settings, i realized that iTunes automatically "OPTIMIZES" the pictures.
Therefore, has anyone found the perfect settings ?
Regards
Nycky
Message was edited by: NyckyLim

Doesn't matter, iTunes will still Optimise them. The process doesn't just resize them it also converts them to the format used on the iPad.
Regards
TD

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

Best Resolution/Quality Settings For 4:3 Video Going To DVD...

Hello,
I have several old Hi8 tapes that were imported into iMovie 10x and need to find the best export quality for these uncropped 4:3 videos. They will be exported via "Share > File" into an MP4 file format (with H.264) and then sent to a third-party DVD program. So, what resolution and quality settings do I use?
Do I use the highest resolution (1280x720) and then gauge down the custom quality until it can fit on a 4.7GB DVD?
Do I use whatever resolution that can handle the quality of "High" and still fit on a 4.7GB DVD?
Peace,
Dr. Z.

Hi
DVD is as standard - Interlaced SD-Video quality - Whatever Video-DVD authoring program used (e.g. iDVD, Toast etc)
Feeding iDVD Higher resolution and Progressive material - Will not improve the final DVD but decrease the quality as iDVD do a bad job in downscaling.
To get best possibly result I do
- Use a Video-Editing program that can handle - Interlaced SD-Video quality - as iMovie up to HD6 and any version of FinalCut.
iMovie'08 to 11 can not do this in full.
- Export as QuickTime .mov (just straight off) - if iMovie HD6 then just drop the Movie project icon into iDVD (All Quality is preserved)
- Brand of DVD used - I only use Verbatim
- Type of DVD used - RW-DVD usually do not work. R+DVD only works on Newer DVD-players - I use R-DVD
- BURN SPEED - I set as low possibly
- Free Space on Boot Hard Disk (Mac OS/Start-up one) - never less than 25Gb
This should deliver best possibly result.
Good Luck !
Yours Bengt W

Best Bitrate settings for laptop DVD play?

This is a question about what encoding bitrate settings are best when customers will play DVDs on laptops as well as DVD players. I've been using variable bitrate encoding and settings of min 2.8, target 5 and max 6 and that seems to work well on the test laptops I'm using. However, the slowest is a pentium 4, which is faster than some of the older laptops still in use. I just read that using a constant bitrate will make it easier for a wide range of players to accept a DVD because the device (or software) has to make fewer calculations when playing the DVD. I've been using VBR because it was recommended for higher quality when transferring HD to SD.
I make educational DVDs that are sometimes played by teachers on laptops. Any suggestions on the best compromise settings that will maintain decent quality and still make it as easy as possible for a range of laptops to play the finished DVD?
In Adobe CS5, I'm currently encoding from 1080p HD to SD from Permiere to Encore using these settings in the media encoder:
Format: MPEG2-DVD
PRESET: NTSC Progressive Widescreen High Quality
Maximum Render Quality
VBR 2 pass
Minimum bit rate: 2.8
Target bitrate 5
Maximum bitrate 6
GOP SETTINGS
M frames 3
N frames 15
Audio preset of 48 kh and PCM 16 bit
Multiplexing = NONE
The quality on the finished DVDs looks quite good. I understand CBR will degrade the quality some. I thought I'd get some input and suggested settings before burning tests using CBR. Is it even worth it to burn CBR at the bitrate settings I'm using?
Finally, I will have the DVDs professionally replicated.
Thanks

If the laptop has a DVD player in it, you have to assume the hardware is fully capable of the full DVD spec, which means VBR up to 10 Mb/s
I think you're worried over nothing. Just make the DVDs as you have been.

What are the best settings for Youtube videos using Camileo X200

What is the best video settings for the x200 for youtube videos. 720p-30/ 720p-60/ 1080p-30 .
Thanks

Hi
In my opinion the 720p-30 is good enough for Youtube.

Best volume/compression settings for AUDIO for Rock concert DVD ???

I am putting the finishing touches to a 2 hour rock concert DVD.....
I am converting the wav/and 5.1 to Dolby 5.1 and 2.0 files ....
They are sounding really quiet compared to the original waves...???
I can see that there are some dolalogue/audio compression settings and something set to -21db.....
How can I make them louder...and if I do will it mess up playing on normal DVD's ....
I know there are some DOLBY compresor settings in mac DVD player that make the sound pump if switched on...
Any thoughts or help would be appreciated???

Hi
You must change some settings in the standard Dolby presets to keep the original level and mix:
- Dialog Normalization: -31
- Compression preset: none
This way your AC3 files will keep the level and mix from your original files.
Hope that helps !
Alberto

Best ATV-2 settings for ripping DVDs using Handbrake

Similar Messages

Maybe you are looking for