Best Audio Filter to cut out traffic noise

I'm new to the audio filters. Can anyone suggest one that might help reduce the background traffic noise in an outside interview?
Susan

You can try using the noise reduction tools in SoundTrack Pro, but the best way to eliminate background noise in situations like this is to use a directional, dynamic mic when recording.
If you are unfamiliar with the noise reduction tools in STP, check these out: http://www.google.com/search?client=opera&rls=en&q=noise+reduction+soundtrack+pr o&sourceid=opera&ie=utf-8&oe=utf-8&channel=suggest
-DH

Similar Messages

What's the best audio filter and settings to eliminate echo?

I shot an interview in a hallway. What's the best audio filter and settings to reduce/eliminate echo?

There isn't one. You will be trying to remove the same frequencies as those you want to keep.
Reshoot it, strategically position some heavy drapes and use close miking such as a lav and reliable monitoring quality headphones.

Best audio filter for heavy wind noise ?

Hello everyone
I'd like to know what is the most used audio filter in order to recuce a heavy wind noise without affecting the voices of a conversation in my movie ?
Thanks

I don't know what people use, but I've always been told that the best way to get good audio is to get it right the first time. Since I'm no sound guy, I struggle to get anything to sound good.
Export your offending Audio to .aiff and pull it into SoundTrack. Go to your Effects on the middle left of your screen and pick SoundTrack Pro>Channel EQ. Drag this into the area under your Effects bin. Then start playing your sound while adjusting the Advanced Dialog.
You can tweak different frequencies and try to pull out the wind. However, wind often is around the same range as voices, so it's going to cause some distortion.
Beyond this, if the wind was really bad it will have caused "popping" that will have mutilated any talking at that moment.
Can you do any looping/re-record the voices? That may be your best bet.
I'm hoping some sound guy comes here and sets me straight and helps you out. Perhaps check the SoundTrack forums....
I'm sorry I'm not more help.
~Luke

Any audio filters to take out "hiss" noise?

I have recently done some quick interviews with a boom mic, and there happens to be a "hissing" sound that I wish to take out of the audio. I was just wondering if there is any audio filter or anything in Soundtrack (not Sountrack-Pro) that anyone would suggest me using to take this unwanted audio away. Thanks for any suggestions.
(I also have FCE 3.5HD)

I use SoundSoap2 which works pretty well. It's around 100.00. I think it can be used as a stand alone app. I use it as a plugin with audio apps. Audacity is a free audio editor that reportedly has a feature that is very good, altho I haven't tried it. You would have to clean up the file, render it and then import back into FCE. good luck.

Premiere Pro CC audio pops then cuts out. HELP PLEASE.

Driving me nuts...
Read all the forums. Tried reinstalling, deleting .cfs files, changing audio inputs, everything.
What is happening is that when I play back, the audio will "pop" (like feedback, loud, distorted, sounds like its hurting my speakers) then just not play anything. Levels monitor will be firing away, waveforms are there. Matching back to source monitor does nothing. Totally silent.
When I quit I hear another pop as the program exits.
The rest of the computer has sound functions (iTunes, internet, everything)
Anyone?
Macbook pro 2011 - 10.8 - 16 gigs of ram - playing off secondary internal SSD drive. 4 tracks of sync sound. Thanks.
PS - just noticed a little warning triangle at the bottom right of the program that says "Audio Dropout Detected at 1:11.442 in Adobe Player" - no idea what the hell that means.
PSS - I have a feeling its because of the video. I'm editing RED (4k) - when the video is just on one track its no problem, but as soon as I put it above another clip, then it pops and cuts out.

I dropped 8K on a new mac pro, thinking, foolishly, to just throw some computing power at it...
My friends, Adobe just hates macs.
Both my D700 GPUs are kinda useless to Premiere. nVidia won and I guess Adobe could give two sh*ts about anyone on a new mac. I was hoping to go to premiere after Apple decided to drop FCP. What's amazing, as a commercial editor in NYC, EVERYONE was either on FCP or Avid (much more FCP) so there was lots of business to pick up... but the more I talk to people, and stories like this get shared, the more people are moving over to Avid, even FCPX if you can stomach it. Such a shame because AE, PS and the rest should work so nicely together... they just couldn't make it easy for non nVidia people or mac people.
I've tried contacting them (I'm even on their customer review panel) but no one seems to be able to patch this up. I've done 2 clean installs on my new mac, because I've gotten to the point that every premiere freezes, its a restart. Unreal. Been editing for 10 years and never had problems like this... even when we started putting Avid on a mac.
Failed and quite pissed. Not for nothing Adobe, if you're listening, I've got a real mind to use every piece of my social media platform to bring this to your attention - this program has wasted so much of my time (and money, jeebus) that it's almost immoral what's been going on.

WHAT IS THE BEST WAY TO KNOCK OUT TRAFFIC NOISE IN SOUNDTRACK PRO

I have watched apple pros knock out the sound of the boat noise and just had the people talking, could someone explain how you knock out that sound again, I am pretty knew to this program. I am trying to knock out the background sound of the traffic. Thank you for your help,
Bill

I worked on a project to cleanup up audio - where 'guerilla video' was shot in the streets of SF during the massive war protests - had:
a. sanitation trucks operating
b. wind
c. bicycle bell
d. heels/ footsteps
e. background voices
f. sound of the camera operators lens cap clicking against the camera body
g. other vehicular noises
I used:
Peak
Sound Soap
Eventide Harmonizer
Logic Audio / Pro plugins
Lexicon PCM 80
STP / plugins
and although we were able to reduce some of these, overall, I was quite unsatisified and realized, perhaps for the last time, that you simply cannot remove most 'aural debris' from a mix, period. If you want a quiet background, well now you know why most productions bother to shoot on sound isolated stages and love to yell "quiet on the set" (he).
And Ive had those who would argue with me in saying that 'old/dirty paintings can be cleaned up' - perhaps true however, usually the debris is on an outer layer and not mixed in much with the original artwork, at least to some extent. And even this kind of work is incredibly delicate and said to be quite difficult to do.
In the final analysis, the shooter was advised to realize that the very nature of the video - its completely urban setting, was still quite compelling.
fwiw

Audio chipmunks - then cuts out completely

I switched to an M-Audio MobilePre USB unit for good sound
quality today. Now when I record narration, the first one or two
frames are fine, then on frame 2 or 3, my voice turns into a
chipmunk. By frame 20 the narration stops completely.
I've changed the latency but it has had no affect.
Please help. I have to record today!
Thanks.

I had the same issue when using the M-Audio unit.
My solution was to set "Sound Scheme" to "none"
For some reason when recording, when there is a system
generated sound (like a click from a web page being loaded) it
messes up the audio.
It worked for me, I hope it works for you.

Bluetooth audio cuts out

Hi,
I have a 3G iphone and recently purchased a Blueant T1 headset. One of the key features that I wanted to make use of is it's ability to stream audio from my iPhone. I had no problems getting the headset to connect and can play audio through it but I have noticed some odd behaviour and wanted to know if there's something I can do about it.
First when I play music and the phone is not locked it's fine, but once I lock the phone the audio startes to cut out once in a while and it gets worse when I start walking and is constantly cutting out when I start running. Now if I plug the phone into power it's solid, but on battery and the screen locked it's irritating to say the least.
Thanks for your help.

you don't press the power off button when you're listening to music
just don't click on the screen
when I run with my headset and leave the power button alone and the iphone turn off the screen itself without disconnecting my bluetooth headset connection

Sony STR-DN1040 audio cuts out briefly, frequently

Audio on my new Sony STR-DN1040 cuts out whan SAT/CATV is the source. This happens frequently (every 30 seconds to a minute, unpredictably), though it is only for a fraction of a second each time.
When the audio cuts out, the following items on the front display panel of the receiver all flash off momentarily:
A.P.M.Dolby Digital SymbolD.L.L.
When I reconnect the cable box directly to the TV instead of the receiver (same HDMI cable), the audio issue goes away. I have tried resetting/clearing the receiver. Any thoughts/suggestions?

Thanks again for your suggestions! They are much appreciated.
I have noticed that the problem is apparent on some TV channels more than others. Some channels seem to cause the audio drop and other channels don't.
I have now tried attaching my Blu-Ray player to the SAT/CATV port using the same HDMI cable. The problem was not apparent (but I haven't noticed the issue with the Blu-Ray source previously, so perhaps that helps rule out the SAT/CATV port).
I also tried attaching the cable box/PVR to the BD port and the problem was still present (as mentioned earlier, mostly present on certain channels).
The software is up to date as of last week (ver. s9327.1074.0).
I also tried powering off and disconnecting everything, then reconnecting and powering everything on in the described order. The issue is still present, regardless of the HDMI input port that I use. As mentioned before, this happens only when I route the SAT/CATV signal through the receiver. When I bypass the receiver, by connecting the cable box/PVR directly to the TV, the audio does not cut out on the usual affected channels.

The audio on my iPhone 4s cut out randomly; I have to unplug and replug headphones to get it back. How can I fix this?

For the last year I have been unable to use my iPhone speakers because of some bug. I can play music and audio through headphones, but that's it. And just today even the headphones became spotty. I'll play a song (through iTunes) for a while, then the audio will just cut out. I can get it back by unplugging and replugging the headphones (sometimes multiple times) but that fix doesn't last long; usually within a few minutes (if not much sooner) the music cuts out again.
I really don't want to buy a new one because this one otherwise works fine. How can I fix this?

iOS: Unable to update or restore

Audio on keynote exported quicktime videos cuts out at 50 seconds?

It just started! When I export my keynote into a Quicktime file, the audio cuts out at 50 seconds. I have been creating videos a long time with this method and never had problems before.

I am willing to share files with Apple. Mine are copyrighted, but are shareable.
But here's a wrinkle on the problem that puts me a little more in sympathy with Apple engineers, since they may well not have encountered the subtle environments we have that is generating this audio problem.
I was having the same problem you are for several days after I upgraded to Keynote 6.5 and Yosemite 10.10 (running on a mid-2011 MBA). I duplicated a keynote file with audio recorded that cut out after 50 seconds or so: audio stopped on slide 2 even though I had recorded and saved the whole 50 minute presentation. I store my keynote presentations along with Quicktime movies (m4v) and downsampled mp4 files in a sparsebundled disk image. I created a new, larger disk image yesterday because I was running out of storage space. To do that, I copied all the files in the sparsebundle to a temporary folder on a backup drive (My Mac Book Air is running out of storage space). Then, I deleted the old sparse bundle, created the new one, and copied all the files back.
After reading your latest post, I thought I would try again. I opened my test Keynote file, now copied to the new sparse bundle, and the audio works! I can hear the audio in the Keynote file when I "Play Recorded Slideshow" from the Play menu. I also exported to a Quicktime m4v movie and the audio is all there. The Keynote file size didn't change during all this: still 36.8MB, which is typical for the audio recorded ones. I start with a 2 to 4MB presentation of 15-20 slides, record audio, and the file size increases to 35-40MB. Then the Quicktime m4v is typical 200-300MB. This one is: 239.4MB.
So, although the bug is not squashed, take heart and don't delete those files! Your audio may actually be in there somewhere.

Bluetooth audio cutting out

The bluetooth connection for all audio speakers is cutting out - especially when scrolling through email and web browser. I'm on a MacBook Pro 13-inch, Mid 2010. The issue of bluetooth cutting out started after loading Yosemite (now 10.10.1.). It doesn't matter what speaker I'm connected to via bluetooth or the distance between the computer and speaker. While listening to any streaming audio - from any source (web, iTunes, etc.), when I type or scroll through email or browse the web, the audio cuts out on the bluetooth speaker. Is there something I can do to fix the connection issue?

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear, and then again as you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Audio Cuts Out During Slideshow Transitions

Hi-
In my iDVD6 slideshow I have embedded audio. It cuts out during each transition. Do I have to not use transitions to keep that from happening?
Are there some transitions that don't make the audio cut out, or is it something else entirely? Thanks for any insights!
-Ranger

MacinTouch has a good discussion of this issue here:
http://www.macintouch.com/readerreports/idvd/topic2244.html
Besides making the slide show in iMovie, one poster at MacinTouch said he had always had success with DVD playback if he created the slideshow in Photo to Movie:
http://lqgraphics.com/software/phototomovie.php.
I just had this same problem with my very first iDVD. The problem does not appear to be with iDVD, but rather with DVD players that do not fully support the DVD spec or have large enough playback buffers. I found a little more insight here:
http://www.aidinc.com/features/dvdfaq.asp
I tried the disc I burned from iDVD in 2 different physical players and also in Tiger's DVD Player app. The disc works perfectly played back from computer. It played with just a slight bit of audio stutter on a 5 year old, under $100 Go player but with lots of stutter and even stutter on menu transitions in a 2 year old $250 Samsung DVD recorder.
I want to try burning the project from a disk image in Disk Utility using a slower burn speed but have not yet tried that.
My slideshow is pictures of a recent visit to relatives who are die-hard PC users. Unfortunately, I bragged to them about my Mac and promised to send them DVDs. Hope the discs will playback okay on their machines.
Hope this helps and Merry Christmas!
Paul

Audio cutting out on playback

I am editing a video in FCP X and the audio keeps cutting out in playback.
The video is mainly comprised of .mov files converted from M2T files using the Apple ProRes 422(HQ) codec. There are one or two .mov files supplied by another camera operator with lower spec, but these are not problematic.
I had no problems with previous projects using the same files, but this time the audio is constantly cutting out on playback. It seems to be fine on export which is a relief but the playback problem is making editing very difficult.
Does anyone have any advice?
I am using:
MacBook Pro
OS 10.8.4
Processor: 2.7GHz Intel Core i7
RAM: 8GB 1600 MHz DDR3
Graphics: Intel HD Graphics 4000 384 MB
Final Cut Pro X 10.0.9
Thanks.

Hi
Sorry for the delay in replying.
The video was filmed on a SonyZ7 camera which created M2T files. These were then converted using Pavtube MTS-M2TS Converter. I converted them to .mov files using the Apple ProRes 422 (HQ) codec.
I used the default audio settings for the conversion which are:
Codec: pcm_s16le (no other options)
Sample rate: 44100 (only other option is 44800)
Bitrate: 352800 (only other option is 38400)
Channels: stereo
The only changes I've made to the audio in FCPX are to adjust volume, add fades, and in some cases remove one of the channels and turn the other one into dual mono.
I've also now cleared some space on my Macbook harddrive as I wondered if that was the problem, it's now less than 50% full and it's still an issue. It doesn't seem to be a RAM issue as I have the MemoryFreer app and this happens even when I have plenty of free memory.
Hope someone can help?
Thanks
Elspeth

I have a 2nd generation ATV and my audio and video is cutting out.

The problem is intermittent. Sometimes the picture continues and only the sound skips. Sometimes both the audio and video cut out and return a second or so later. This even happens on the menu screens where the video and/or sounds will "hiccup". This happens when playing internet conent (like from iCloud or iTunes radio) or when playing content resident on my home computer via home sharing. I've tried the setup at more than one house, on more than one Wifi network and hooked to more than one TV, but the problem still occurs. Can anyone offer suggestions for a solution?

Hello WanderNotLost,
The article linked below details some useful information and troubleshooting steps that can help resolve issues with playback on your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
Cheers,
Allen

Best Audio Filter to cut out traffic noise

Similar Messages

Maybe you are looking for