Best back up software and hardware requirement for the same

Good morning to all,
I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec
We plan to upgrade our servers , and moving to VMs and plan to implement network storage.
So we want a back up solution which could back up VMs ,Shared folder and other required data.
What are the best practice and solutions for backups.

Nopes :)
It depends on you. I've been using Symantec from many years now ;)
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

Software and Hardware Requirement for Management Agent

Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

Software and hardware requirement of Discover 4i?

What is the software and hardware requirement of Discoverer 4i?
What is the requirement also for application-mode? I mean the application side.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

Hardware Requirements for the SAP SSM (pilot works) installation

Hi All,
Can any one please provide me with the information on hardware requirements for the SAP SSM (pilot works) installation.
Thanks in advance.
Anjum.

I'm think if you can install Windows then enough RAM and Processor you have ....
In any case "the more the better" .
Regards.

Software and firmware updates for the Zen Vision M 30 gb.

On the Creative support homepage I can find the software and firmware updates for the Zen Vision M 60 gb, however, there is nothing listed for the 30 gb unit. Where can I find the software and firmware updates (downloads) for the 30 gb unit's

http://support.creative.com/Products...me=MP3+Players

Different LOVs in af:query and af:form for the same VO attribute

Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?

We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel.

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price I am paying for Photoshop alone?

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?

Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium

Maximum user and hardware requirement for SAP B1

Dear All,
One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
Rgds,

Mark,
Please refer to the following PDF
https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
Also check the following link
https://websmp206.sap-ag.de/smb/sbo/resources
Good luck
Suda

Hardware Requirement for the SAP E-Sourcing 5.0

Hi,
Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
Thanks
Sanjay Rai

Hi Sanjay,
May be this forum is not relevent.Hardware requirement mainly may depends on number of user licences which your company looking.also based on number applications which u r going to install....
Rgds,
Gadde.

Stetting up FTP and SFTP adapters for the same interface

Experts-
I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
Please send me any suggestions which would resolve my problem

Hi Hari,
As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use SFTP for the secure transfer.
Best Regards
Srinivas

What are the disc space and memory requirements for the apps?

What are the disc-space and memory requirements to run the apps

Hello John!
thank you for the info. However, as I have only 1Gb memory and a 32Gb
solid-state disc, I think that I will stay with Acrobate.com for a while
longer.
Regards
Brianb

Best practice when FACT and DIMENSION table are the same

Hi,
In my physical model I have some tables that are both fact and dimension table, i.e. in the BMM they are of course separated into Fact and Dim source (2 different units) and it works fine. But I can see that there will be trouble when having more fact tables and I e.g. have a Period dimension pointing to all the different fact tables (different sources).
Seems like the best solution to this is to have an alias of the fact/transaction table and have 2 "copies" of the transaction table (one for fact and one for dimension table) in the physical layer. Only bad thing is that there will then allways be 2 lookups in the same table when fetching data from the dimension and the fact table.
This is not built on a datawarehouse - so the architecture is thereby more complex. Hope this was understandable (trying to make a short story of it).
Any best practice on this? Or other suggestions.

Id recommend creation of a view in the database. if its an oracle DB, materialised views would be a huge performance benefit. you just need to make sure that the MVs are updated when the source is updated.
-Domnic

Can you switch back between CS5 and CS5.5 with the same project with Premiere??

Hey all,
I just got CS5.5 for Mac (Lion) and was wondering if i am able to save a project and open it with CS5 Premiere because I work with one other editor who has CS5. I have tested saving a project in CS5.5 and opening it in CS5 but it says that it needs to convert first but then it seems to work fine. So basically, is there workflow good between the 2? Any known issues or anything else i should know about when switching back and forth?
Also, I have the student edition of CS5.5 and was wondering how many times can I install it? I plan on buying a new computer in a few months from now but currently have 2 and was wondering if i should install it on both my current computers and then deactivate one and install it on my new computer in the future? Or is there a limit and that will not work?
Thanks!!

Because it has to create a new "version" of your project every time you go back and forth, you'll end up with umpteen versions if you go back and forth every time which could become a nightmare for you... And because it creates new "versions" every time, you're far more likely to end up with a corrupted file at some point... I'd stay away of going back and forth between versions...
As an aside, does anyone know if you can go back and forth between the same version (CS5.5) on different platforms (Mac/PC)? I may need to start doing that soon at work, and I've never tried...

How can I differentiate between iPad and iPhone iMessages for the same contact?

I have my sister in law's email and phone number all in the same contact. She iMessages me from both her iPad and her phone. They come up as two different iMessage conversations, but they both are under her name. When I go to text her I don't know if I'm sending it to her iPhone or iPad. Anyone know if there's anyway to differentiate? Sometimes looking at what was previously said in the conversation helps but I can't always remember (nor do I know which device he was messaging me from in the previous convo). Thanks all

Try scrolling to the top of the conversation and tapping Contact. You will then see the originating address highlighted in blue on the contact. If the iPad and iPhone are creating two different conversations, chances are if the email address is highlighted it's coming from the iPad; if the phone number is highlighted it's coming from the iPhone (although not necessarily). To know for sure you would have to ask her to check Settings>Messages>Send & Receive and tell you which is checked under "Start new conversations from" on both devices to know for sure.

Command to see host and static nat for the same object together

I have researched this but cannot find an answer. ASA running version 8.5.
When you create the config using object NAT you enter the commands as follows
object network <object name>
   host x.x.x.x
   nat (inside,outside) static y.y.y.y
When the config is displayed it separates the host and nat commands in two different sections of the config as follows
object network <object name>
   host x.x.x.x
object network <object name>
   nat (inside,outside) static y.y.y.y
Is there a command that will display it all together (like it was typed in)? Show NAT is something like what I am after but without all of the extra info such as translate_hits, untranslate_hits etc. I need this information but cleaning up the output of a show nat is going to be tough.
Any suggestions?
Thanks.

Sorry, show nat detail is what I meant in the original post in place of show nat.   Show nat detail still has all of the extra info I was trying to avoid. Guess I will be editing a text file.
Thanks for the reply.

Best back up software and hardware requirement for the same

Similar Messages

Maybe you are looking for