Best BIOS for the job? (K8N Neo4f)

I have, as stated in the subject, a K8N Neo4F mobo and an AMD Venice core CPU. I have read that there are BIOS specifically tailored for Venice core, and some are not. Which version of BIOS should I be using to optimize my system? Honestly, as I am not at home, I'm not even sure which I have, but I believe it is 1.6. I do seem to be hitting the same walls that I have read other people hit without a BIOS modded for Venice core. Is there any truth to this? I am still rather new to all of this, as this is my first build, would it not be advisable to start messing with this stuff?
Thanks for any help.

Is there any problem with your hardware? If you don't have any problems do not flashed it as it might cause you problem unless it has a problem then you have no choice to flashed it. Many ppl used Ver 1.9 while other's don't. You may look into this forums where you have the same spec's of yours.See from my sig as it might help you how to flashed the bios. Gd luck.

Similar Messages

Is the 'Undercover' app the best app for the job ?

Hi,
Is the 'Undercover' app the best app for help finding a lost iPhone/Touch or is there an app that does a better job ?
Thanks

Short of getting MobileMe that is probably the best you are going to come up with. You will have to hope that whoever finds the iPhone actually plays the game and that you check for this information close to the time they do so. You also need to hope they don't connect the iPhone to their computer which will wipe the app from the device.

Best router for the job

Hi,
I was wondering if anyone had a proposition to resolve this situation:
i work in a small office (10 employees, 1 server)
presently, our internet goes trough a linksys router and a linksys switch with power over ethernet
... ITS HORRIBLE... I keep having to reset the router and the internet is not constant (programs such as ichat keep connecting and disconnecting)
my firmware is up to date
does anyone have a better proposition as far as equipement for this type of setup? I was thinking airport extreme maybe? would it be enough?
thanks
JM

I would like to add two more points:
You also need to consider the type of Internet link you have. If you have a slow 1.5Mbit DSL line, even 20 people are downloading large files simultaneously, you are still going to be fine, since your bottleneck is in the slow DSL line. If you have a leased line, and manage some web servers in-house, that could be taxing for the little Apple router.
The other thing you have to consider is what type of office you're going to be covering with the wireless network. Are you in an open floor office (easy) or old brick building (hard)? Apple have always put styling above functionality, and they have always hidden the antennas inside the box. As result, there is very little you can do to shape the radio waveform.
Click Here for a good explaination of different types of antenna and their signal shapes (including the Airport built-in one). As you can see, Apple has a very short range, but it's placement is not very critical. If you need the flexibility of having external antennas, then Apple is not for you either.

Best Mac for the Job

We are looking to upgrade our editing system.
We produce 1-2 minute motion graphics in After Effects CS4. We also import miniDV footage and use 'multi-cam edit' in Premier Pro CS4 to produce a 30-min T.V. show.
We are looking at a Mac Pro. Give me your recommendations on Processor, Ram, HD, Graphics Card and how to preview on TV video monitor. We have a 2TB in-house server, so I don't think I need multiple HDs for media storage.
Thanks in advance.

Neither Harm nor Jim are correct. I use both platforms and the Mac wins hands down. Regardless of hardware, OS X is far superior to the world of hurt that is Windows. I would recommend getting the base quad-core Mac Pro and adding RAM from a Mac specialized 3rd party supplier (you will save a ton of money this way). The Mac Pro is a great machine and a snap to upgrade. Comparable Windows PCs are actually more expensive than the Mac Pro so it is also a good bargain. The stock graphics card should be good enough for your needs. With a DVI or mini display adapter it should permit you to connect to a TV monitor.

K8n neo nf3 250: best bios for OC.

Hi.
What is the best bios for overclocking on msi k8n neo fsr/platinum. I use bios 1,47 now, but i think it is playing games with me.
I have no problem running my cpu at 10/255/2550, but my Ocz 3500 EB wont follow that long on 1:1. So i tried running this at 9/280/2520 and my memory running at 5/6. But my cpu wont get totally stabil here...
My temperatures here is 32c idle and 48c load.
Is there a better bios for OC?

Try 1.42
Find it here K8N Neo Bios Collection.

How do I upload to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC :) )

How do I upload photos to Facebook in High Resolution using my iPhone. Do I need an app? Which ones are best for the job? (I know how to do it on a PC )

100pat wrote:
Thanks, I can do it fine from my Windows desktop PC, I just want to know how to do it from an iPhone4
Like I said before ask facebook or look at their support site to see if that is even a feature.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Best Bios for Geil Rams

I have 2x Geil Ultra PC3200 2-3-3-6 sticks. What's the best Bios for that memory??? (i mean OC)

Perhaps telling us what kind of motherboard you have would help .
Create a hw signature as noted in the forum rules.

Best bios for p965 neo v.1x

what best bios for p965 neo v.1x?
proc dual core 2,8 nvdia ge force 8400 GS,2x 1 gga ddr2 pc 800
windows 7 ultimate 32 bit
thanks for reply

I have 1.9 right now...i just ask for best perfomance for my pc...what recommended bios for the best perfomance and for gaming thanks

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

Best Practice for the Service Distribution on multiple servers

Hi,
Could you please suggest as per the best practice for the above.
Requirements : we will use all features in share point ( Powerpivot, Search, Reporting Service, BCS, Excel, Workflow Manager, App Management etc)
Capacity : We have 12 Servers excluding SQL server.
Please do not just refer any URL, Suggest as per the requirements.
Thanks
srabon

How about a link to the MS guidance!
http://go.microsoft.com/fwlink/p/?LinkId=286957

Best practice for the test environment & DBA plan Activities Documents

Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PM

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

Convert Spool to PDF and mail for the jobs not run in background.

Dear All,
I need to convert the spool job into pdf and mail as attachment for job not run in background.
I am printing the bills using the program SD70AV3A to print the bills in a batch using the SUBMIT.
But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
SUBMIT SD70AV3A
         WITH RG_KSCHL-LOW = 'ZRR'
         WITH RG_NACHA-LOW = '1'
         WITH PM_VERMO = '2'
         WITH PM_NSORT = '1'
         WITH RG_VBELN IN range.
*        TO SAP-SPOOL
*        SPOOL PARAMETERS print_parameters
*        WITHOUT SPOOL DYNPRO
*        VIA JOB name NUMBER number
*        AND RETURN.
so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
please suggest some solution.
Thanks
Bhargava.

Hi,
Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
Table TSP01 to get spool number
You ,may need to convert OTF to PDF: FM CONVERT_OTF
and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
To send mail use class: cl_document _bcs.
Regards,
Maria João Rocha

Best Resoltion for the 7" Digital Photo Frame

Hello,
I have got a
*Digital Photo Frame II, 7"W, 720 x 480, Sensor Touch, MP3 Player-Funktion PA3637K-1ETC*
The Manual doesn't tell me about the best Resolution for the Pictures to put on.
on the Web you can Find: 800 x 480 Pixel WVGA-Screen (720 x 480 Pixel sichtbarer Bereich)
The samples are 726x 480 pixel.
Now my Problem:
When you put Pictures on it - *It cropps a bit on the right and left side and much more on the top and bottom.*
I have tried a lot of sizes. Even on 720 x 480 it cropps.
So my question is : What is the best Resolution for the PICs ?
Best Regards
Markus

Sorry,
check your calculator: 800:533 is NOT 1.562... Mine Says : 800:533 = 1.5009380863039399624765478424015
That is less wrong than it cut's off.
Try it: take a white pic with 800x533 and draw a black frame of 10 pixels on the border. you won't see it on all sides !
That makes 20 pixels (10 on each side) of 533 cut off ... that is more than 0.0009380863039399624765478424015 error.
Markus
Message was edited by: markusb68

Best BIOS for the job? (K8N Neo4f)

Similar Messages

Maybe you are looking for