Best cable connection: gtx560ti(2xSLI) to 2012 3DpanasonicTV with(1.3a receiver)

Hi everybody.
Best cable connection between :MSI gtx560ti(2xSLI) to 2012 pana-TV  with (1.3a receiver Onkyo TX-SR507)
The TV I am planning to buy is a 2012 viera 3D model: TX-P42ST50Y .
Does any of you guys know how the best way is to connect the three so that 3D- picture and 5.1- sound is optimal ?
Notice the Onkyo is 1.3HDMI and not 1.4!
Greeting from Flemming from Denmark.
PS: I guess I also have to buy NVIDIA´s software:3DTV Play

Quote
Solution B) Do you know a 1.4 HDMI-3D-TV/monitor that can passthrough the 7.1 DTS sound back to the 5.1 DTS  1.3a-Receiver and be recogniced as 5.1-DTS ?
Yes it should
Quote
Solution A) I have heard that the 1.3a receiver ruins the 1.4 3D-signal to the 3D TV/monitor.
1.3 specs also can transfer 3D signal, but i guess you have to try to find out.

Similar Messages

  • What is the BEST cable connection from Canopus ADVC 300 to Black Magic Intensity Pro HDMI PCI Express Capture Card?

    I must connect an ADVC 300 to a Black Magic Intensity Pro HDMI PCI Express Capture Card.   For best quality, which cable should I use?
    On the ADVC 300 there are outputs of firewire, S-VHS and RCA.
    On BMPro it's a little confusing. On the breakout cable there are connectors that say:
    -5 B-Y OUT
    -4 Y OUT
    -3-R-Y OUT
    -7-R-Y IN
    -8-Y IN
    -9 B-Y IN
    -15 AUDIO IN RIGHT
    -10 AES/EBU OUT
    -12 AUDIO LEFT OUT
    -14 AUDIO LEFT OUT
    -13 AUDIO RIGHT OUT
    With the BMPro, there is also a separate, shorter cable.  On one end it looks like S-VHS and on the other there are two connectors, one black and one blue.
    On the actual BMPro Express card strip instead of using the breakout cable, there is HDMI IN (and HDMI OUT). 
    How should I connect this?  Is there an adapter cable of FIREWIRE TO HDMI? 
    Any help is much appreciated. 

    Well, when I researched how best to digitize VHS (into Final Cut Pro 7), I learned two of the best devices to use are BMPro and Canopus ADVC 300.  I’m using the ADVC 300 for the built-in time base corrector.  I definitely want to use that to stabilize the video.  I also read how well BMPro improves image quality.  So, I thought to use the two together must produce outstanding quality (well, as good as VHS can be). 
    Perhaps I got confused into thinking I can use both.  But the BMPro appears to have an S-VHS adapter. 
    I guess I’m wondering what is better quality: 
    Run the firewire from the Canopus ADVC 300 converter directly into the firewire port on the Mac Pro
    Or, run an S-VHS cable from the Canopus ADVC 300 into the BMPro Capture card
    (I should mention that I have purchased all these items and already have the BMPro Card installed so at this point it’s not a cost issue, but rather an issue of simply which works best?)

  • What is the best cable to use to connect my MacBook Pro to my LG HD TV

    What is the best cable to use to connect my MacBook Pro to my LG HD TV?

    Read the tv user manual to see what they recommend. 

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • Best cable to use to connect an Airport Express to a Sony DE 1075?

    Hi, Does anyone have suggestions on the best kind of cable (RCA etc) to use to connect an Airport Express to a Sony DE 1075 receiver (the receiver was purchased about 10 years ago)...I have the receiver hooked up to a Bose Acoutimass 15 sound system. Thanks,

    If you plan to use the AUX input on the Sony receiver, then you will need a cable that consists of a 3.5 mm Stereo Mini plug on one end and 2 RCA plugs on the other.
    The RCA plugs are almost always color coded red and white to designate the left (white) and right (red) channel.
    Any electronics superstore will have what you need, as will the Radio Shack.
    If you are still not sure what you need, take a picture of the back panel of the Sony receiver using your camera phone and take the AirPort Express with you to the store.

  • What cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    Mine has four  Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out.  True you can only use one feed at a time nut you can only use one port on the telly at one time too.  I used it on my old one port telly for PS3 and Sky and it worked a treat.
    Enjoy
    Jules

  • Two 1st Generation iMacs using 1 Broadband Cable connection - Best way?

    Hi guys,
    I have a snow iMac (600Mhz) running 10.2.8 - I have it set up with Virgin Cable Broadband (formerly Telewest/NTL using a Motorola Surfboard Cable Modem), my mum has passed us her old Tangerine iMac (400Mhz) also running 10.2.8 - I currently have both set up in one of our bedrooms, they are about 2 metres apart on seperate desks.
    I have asked this to quite a few people but am getting different answers all the time so I am hoping you guys here can help in giving me a definitive answer:
    What's the best way for me to get both of these iMacs on via by Cable connection? - I don't want wireless, I just want wired ethernet.
    Some people are insisting I need a wired router similar to this:
    http://www.broadbandstuff.co.uk/productinfo.php?productsid=225
    Whilst others are saying that I just need a switch device similar to this:
    http://www.broadbandstuff.co.uk/productinfo.php?productsid=113&osCsid=7b23b40476276b3714287fcad8b20a38
    Can anyone confirm please?
    Thanks

    I know I have closed this thread off, but wanted to
    ask Alan one more question...
    Did you have to recontact NTL when you got your
    router to supply them with the new code on the router
    before it would work?- A guy at my work has said I
    will need to do this, is this correct?
    Hello IntelMacMini,
    No I did not contact NTL about anything. I think you may have to do this if this is the first time you have made any connection to the internet.
    I presume you already have one computer connected to the broadband modem as I had.
    All I did was unplug the ethernet cable from the modem to the computer and plugged it into the internet port on router and then ran an ethernet patch cable from one of the numbered ports to the computer. Then I switched on the router and followed the instructions that came with the router until it was up and working and connected with the internet.
    Then I connected a patch cable to another numbered port on the router and plugged it into the ethernet port on the second computer.
    Next switched off both computers, the router and the modem in that order.
    Then switched on the modem waited until all was working ( lights steady ), then the router until all the right lights were steady, then the first computer and checked that it connected to the internet, and finally the second computer and checked the connection.
    With the third old g3 powerbook OS 9.2.2 I just set the TCP/IP to connect via ethernet and configure using DHCP server and plugged it in without switching anything off and it worked first time.
    It sounds a bit complicated but if an old technophobe like me can do it anyone can.
    Hope this helps,
    Alan
    Message was edited by: Alan Bishop2

  • Which video out (HDMI or Thunderbolt) will give me the best experience connecting to a Dell U2713H?

    And also, which cable would you recommend?
    (Dell U2713H uses DVI, HDMI and DisplayPort for Video in and has 2560x1440 resolution.)
    I would like to achieve the best possible connection.
    Thanks,
    Johan
    ps. I use a macbookpro with retinadisplay mid 2012.

    Thanks.
    Are you aware of difficulties that seem to be rife when connecting for example Dell monitors to mbp?
    Typically people often say that they don't get maximum resolution. What can I do to avoid that, or is it a problem of the past? I don't want to buy an Apple display as I want to be able to turn the screen vertically.
    Any suggestions? Thanks again.

  • How can i connect my Imac late 2012 to my Samsung TV??

    How can i connect my Imac late 2012 to my Samsung TV??I have a hdmi cable stuck in my Tv and the other end a adapter from hdmi to mini display port. but it won't work I don't get no picture or sound on my tv

    I have an Apple tv and with this it works of course. But I wanted it to use with Windows 7 so I need to connect my imac to my tv...
    how can i turn it on in the settings? it won't work or recognize my tv

  • Not connecting to mssql server 2012 after Installation

    Hi
    I am facing problem since yesterday. Not able to connect to msmssql server 2012
    On my laptop server name 2012 taken itself. but on PC server name is empty and when I put Computer-name\instancename 
    "Lenovo\MSSQLSERVER" then this message come
    Cannot connect to MSSQLSERVER.
    ===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
    Error Number: 53
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The network path was not found
    Please help
    I will be grateful.

    Hi ORashid,
    Try to type in a command prompt the following:
    SQLCMD -L
    It will list you all SQLSERVER INSTANCES and its names, after that, you can try to connect to the correct name.
    Try to check for the protocols (SHARED MEMORY, TCP/IP and NAMED PIPES) are enabled
    And finally check if the SQL Server Browser service is running...
    Best Regards,
    Edvaldo Castro
    Edvaldo Castro http://edvaldocastro.com MCITP Database Administrator on SQL Server® 2008 MCITP Database Administrator on SQL Server® 2005 MCTS: SQL Server® 2008 MCTS: SQL Server® 2005 MCT: Microsoft Certified Trainer MTA: Microsoft Technology Associate
    MTAC – Microsoft Technical Audience Contributor CCSQLA – Cambridge Certified SQL Associate TOEIC – Test of English for International Communication

  • Can I use Time Capsule 1TB as an external hard drive tos tore my music library(but with cable connection,not WI-FI)

    Can I use my Time Capsule 1TB as an external hard drive to store my music library but with a cable connection(Ethernet or USB) and not Wi-Fi.

    Yes, with the following warnings.
    1. A 1TB TC is a Gen3 or earlier and can die at a moments notice.. So backup is essential.
    2. A Gen1 or 2 is slow.. even over ethernet they were processor bound and so transfer speeds are not great.. a USB2 plugged into the computer will be faster. Gen3 is about 50% better as the processor was upgraded by 50% speed.
    3. TC has no built in backup.. TM cannot backup network drives.
    4. TC is designed to spin up slowly and spin down quickly.. you will have issues with itunes constantly losing the library.
    5. You cannot use USB to the TC.. it is a network drive. If you want to use USB directly on the computer buy a USB drive.. but buy as fast a drive as your Mac supports.. Thunderbolt>USB3>FW800>USB2
    USB3 is cheap and very good.. but the port is only from 2012 so check your Mac specs.
    Thunderbolt whilst being super fantastic and around since 2011, has a bank account clearing price although there are Thunderbolt to esata converters.. for around $160. esata falls between usb3 and fw800.
    FW800 from WD is no better than USB2 but other brands it can be twice the speed of usb2.
    USB2 is the worst. But still faster than a TC.

  • Best audio connection

    Best audio connection ?
    a) itunes computer via RCA stereo connection to home theatre
    b Itunes computer streamed to Apple TV , Apple TV connected via optical cable to home theater
    c) this I have not tried ... Itune computer connected  directly via HDMi to home theater
    Also does the sound-card in the computer make a difference ?
    Antoine

    I have Fredereih ataxia so my only hobby left is musique and no way I have the dexterity to insert a cd in a tray, I have 400 cd's all ripped at 196kb.
    I love my Ipad with Itunes and the remote app to take control of my 5 computers in the house.
    My apple tv is ok but I do not have a good internet connection.
    In the room where I listen the most music, I have a small EEE laptop.
    it is directly connected on a 925 pioneer receiver with 9 speakers (RCA)
    Also in this room I have the apple TV connected via the Digital audio cable
    Recently (I'm  in Canada ) I have been using RDIO (Like  Pandora) , they claim sending in  256  kb.
    I  now notice that here is  a difference in Quality for the same file sent it different ways.
    played directly from the Pc is not as good as if I use Airplay ?
    a) should I resample my 400  cd's at 320kb ?
    b) should     I buy another Laptop with a good soundcard and  a HDMI output.
    I would appreciate any recommandation for any laptop under 1000$ ( Only Itune will be o n it.
    Regards
    Antoine

  • Internet through USB cable connection

    Dear Sir;
    How do I connect my phone to the internet through USB cable connection?
    i would like if i can connect to the internet through the USB cable, not through W-LAN, so if i can, how , which software i need?
    Best Regards

    you ahve to install Nokia PC suite then you will be able to connect to internet via your phone over the USB cable.

  • Cabled connection issue but wireless fine?

    I wonder if there's a known issue and resolution to an issue I'm having with a client computer? The PC has been on a cable connection to the Hub v3 for around one year without any issues but it's suddenly blocking the PC via cable to the router. I've tried resetting the hub and also received a new one in the post which also did the same. I did have an issue with "netware" on the PC and other connections in there so for surety I've re-installed Windows XP on the PC and it works fine on my own LAN via cable ruling out the suspected failing LAN card. It also has Kaspersky Internet security 2012 on and nothing else. A clean registry
    I haven't re-installed the BT software as I know it's not needed and for me either the hub has blocked the PC's LAN card mac address somehow or is failing? The only thing I haven't tried is the new hub with the new XP installation which I'll do tomorrow when I return the PC.
    I can install a wireless adaptor and it'll work fine as does another PC on the LAN so DHCP is working in the router, just not for cables lol
    Any ideas as to how I resolve this are welcome?
    TIA
    Andy

    Thanks for moving and replying Molly I appreciate the time it takes as a forum owner/admin and can see the volume of posts you reply too so barely get time to read them but I'm a professional computer technician and never use (buggy) ISP given CD's for just that reason but if you'd fully read my post you'd have seen that I did say I hadn't installed the software. I've also got lot's of coasters though
    The LAN card is an intel pro 10/100 about 6-7 years old (xp media centre) and has always worked like I said then suddenly it has an issue but only with the HH3? My LAN is on VM 100mb (naturally ) and the PC works great here so it has to be a clash between the LAN card and the HH3?
    I updated the Sony Viao VGC -RC204 drivers (intel) and picked up on a security issue where the drivers are vulnerable to hacks but installing the driver did nothing to improve it. I haven't even run TCP optimizer in case I corrupt my clean registry & LAN drivers so I know the PC is clean & cannot be blamed for the problem.
    I installed an ethernet to USB adapter to try & it worked straight away so that led me to believe the LAN card was failing but using it on my LAN it's fine! Maybe the HH3 has had a f/w update that knocks the intel drivers off or blocks them in the f/wall?
    If I put the new HH3 in it should be fine & connect straight away yes? The server login details are preset in the HH3 then it's posted out? Or do I need to login & put them in manually as the new HH3 gives the same error, lol
    I could use the ethernet to usb adaptor or w/l adaptor OR even try a new PCI LAN card in to see if it works but I'd rather get to the bottom of the problem as I don't like to be beaten
    Anyone else seen this issue or can link to it ?
    NOTE: My topic was moved to "the lounge" but on the forum index page there's no description of the forum category which is how I missed it so maybe an admin could put a decsription in there for us? and save a lot of post moves maybe

  • HT4413 I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining.  Thoughts on how to proceed?

    I am trying to use migration assistant to move everything from snow leopard (10.6.8) to mountain lion (10.8.3) using a direct machine to machine ethernet cable connection but it stalls out at about 17 minutes remaining.  Thoughts on how to proceed?

    Have you set both to never sleep?
    Is the source (old) Mac's software up to date (including the Migration Assistant for Mac OS X Snow Leopard update)?
    Is the old Mac healthy?  Have you run Verify Disk on it lately?
    The estimates are wildly inaccurate under the best of circumstances.  How long has it been stuck? 

Maybe you are looking for