Best cable to use to connect an Airport Express to a Sony DE 1075?

Hi, Does anyone have suggestions on the best kind of cable (RCA etc) to use to connect an Airport Express to a Sony DE 1075 receiver (the receiver was purchased about 10 years ago)...I have the receiver hooked up to a Bose Acoutimass 15 sound system. Thanks,

If you plan to use the AUX input on the Sony receiver, then you will need a cable that consists of a 3.5 mm Stereo Mini plug on one end and 2 RCA plugs on the other.
The RCA plugs are almost always color coded red and white to designate the left (white) and right (red) channel.
Any electronics superstore will have what you need, as will the Radio Shack.
If you are still not sure what you need, take a picture of the back panel of the Sony receiver using your camera phone and take the AirPort Express with you to the store.

Similar Messages

  • What is the best cable to use to connect my MacBook Pro to my LG HD TV

    What is the best cable to use to connect my MacBook Pro to my LG HD TV?

    Read the tv user manual to see what they recommend. 

  • Connect to Airport Express to use AirTunes via ethernet cable?

    Hi,
    Here's my setup and question: I am connected to the internet using the wireless network in my house. I want to also connect my computer to my Airport Express for AirTunes which is hooked up to my stereo in the computer room. Since I'm already connected to a different wireless network for internet, can I connect my Airport Express directly to my computer using an ethernet cable in order to run AirTunes?
    Thanks!

    Hi.
    You don't need to do that. You can simply set the express up as a "client" allowing you to be on the network and/or airtunes and/or wireless printing.
    Have a look at this post for the relevant info:
    http://discussions.apple.com/message.jspa?messageID=5578616#5578616
    ---

  • Is is possible to use a netgear wireless router to share a cable internet connection between an airport express and a Sony BD player?

    Hi,
    I have a couple of netgear wireless routers (WGR614, WPN824 v3) as well as a Belkin wireless router (F5D8233-4v3) lying around, and was wondering if it is possible to use any of these to share the internet feed from a cable modem to both an airport express and a Sony Blu-Ray Player?  I connected the WPN824 router between the cable modem and the airport express but the airport express will only give an orange light then as if it does not have internet access.  Any suggestions would be much appreciated! Many thanks.

    What you are basically attempting to do is extend the Belkin router with the AirPort Express Base Station (AX) via a wireless connection between them. This method is known as a Wireless Distribution System (WDS). Unfortunately, WDS is not a standard and router manufacturers implemented, in most part, to only work with their products ... so it will be very unlikely that you can create a WDS between your Belkin and the AX. There have been a few Belkin model that have been updated by third-party firmware that support WDS, but the models you listed are not any of them.

  • I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

    I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

    Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

  • HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

    do you need to connect the airport express to a router via ethernet or can it do it using wireless?

    There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
    http://www.apple.com/compare-wifi-models/
    Do you have one of these products in the living room? 
    If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

  • HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

    Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

    What is the make & model of your modem?
    You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
    Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt).  The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800.  All of the will transmit data, simply a different speeds.
    For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input.  eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
    Ciao.

  • MBP won't Connect to Mac Mini: Using Base Station and Airport Express- HELP

    I'm not a n00b Current setup: I have the dual-band Basestation and an Airport Express to extend the range. I have a MBP and a Mac Mini(Mac Mini is connected to Airport Express due to range).
    Everything works fine and then one day I can't connect to my Mac Mini from my MBP on the same wifi network. The Mini will show up in Finder, but when I click, it can't connect.
    Everything is running latest updates and latest firmware versions. Running 10.6.3.
    Please help. Thanks!

    Hello Al,
    The article linked below details a number of steps that can help get Continuity working correctly with your iPhone and your Mac Mini.
    Get help using Continuity with iOS 8 and OS X Yosemite
    http://support.apple.com/en-us/TS5458
    Cheers,
    Allen

  • Can't connect to Airport Express using Linksys WRE54g?

    I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
    Here's my setup.
    I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
    I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
    I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
    So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
    Now I bring macbook to living room. AE1 works!
    What I intend to setup is,
    1. WAG200G, macbook and external HDD in my studies.
    2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
    3. Control the playlist using iPhone Remote and listen music in living room.
    Question:
    1. Did iTunes connect directly to Airport Express without going thru network router?
    2. How should I setup Airport Express in this case?
    Appreciate anyone who can help me on this. Thank you.

    pss.
    actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
    the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

  • I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
    Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
    Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

  • Why would you need to connect an AirPort Express to a printer to print wirelessly when you could just use AirPrint?

    What is the point of connecting an AirPort Express to a printer when you could just use AirPrint from an iPhone?

    All you guys are mistaking the Airprint system. Wireless printing is a Misnomer. Nothing prints wirelessly. Both the printer and the computer, or i or android device have to be all connected to the same LAN. They can be connected by a wire or a WiFi signal but they all must be on the same LAN.
    Airprint is a Driverless printing system where No Specific Printer drivers have to be installed on the computer or other device. Even with the Airprint system both the printer and the device you are printing from have to be on the same LAN.

  • Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

    Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load.  I've increased / deleted Cache.  Suggestions? Misconfig?  Could it be possible my configuration from MacBook to router isn't correct?
    Thanks!

    JG,
    Thanks for the info.
    Couple of questions. I found an apple support document on this topic that opened with this line:
    "AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
    If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
    http://support.apple.com/kb/HT2044?viewlocale=en_US
    If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
    Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
    I'd like to keep one network if possible but just kicking around short term solutions.
    Thanks again.

  • Wireless iBook not connecting to Airport Express

    As in previous discussions i've seen, all of a sudden my iBook which i have used for quite some time now without any major problems will not find my airport express wirelessly, i am using a router and the same connection for my desktop (hardwired) and the desktop works 100%, i've even replaced the cable from the router to my Airport Express and when I take the very same cable that goes from the router to the AE but plug it straight into my iBook it works 100%, but when plugged into the "AE" the iBook is not finding it, or actually it does come up in the list of available wireless ports (I live in new York city so there's a bunch on there at any given time) but it does find mine automatically as it used to, but when I try to connect to it when i find it in the list, it says "There was an error joning the AirPort network"... if i hit 'try again' several times it it will evntually (somrtimes after 3 tries othertimes after 30 tries)... but even after it says in the menue bar that I am connected with 100% strength, nither iTunes Air tunes finds the AE connection nor Safari (which says "You are not connected to the internet.")
    At the browsers suggestion i then go to the network diagnostics and run through the prompts, until it gets to the 'Select AirPort network" window and nothing shows up.
    Then i tried the AirPort Admin utility and it does not find my base station either.
    My connection to the internet is 100% without the AE, so obviously something is wrong with my iBook airport card or the AE itself.
    Yesterday I uplaoded the newest software 6.2 then reset the AE and actually it worked 2 sessions, then I got back on later in the evening and was having all the same problems...
    so I read on these discussions that going back to 6.1.1 was what was helping others, well so far it has made no difference here.
    that said the signal that it did find after trying again and again and that does show up in the pulldown signal menue drops off eventually... and all this while still not being able to connect to the internet or airtunes wirelessly. and again all the while my connection on my desktop (hardwired through the same router) works 100% (I have verizon DSL and it's pretty great.
    THE AIRPORT EXPRESS GREEN LIGHT IS ON as well.
    I have not done a 'hard 5 second re-set" of the AE becuae i thought it might be difficult to imput all the settings all over again, since i did not set it up myself originally... is this my only choice? can some one give me any other ideas? thank you.

    Glen,
    I feel your pain buddy - same issue here. I have a PG G4 running AE as well. I have internet through Comcast which is coming from the wall, into the modem, and then to the AE. I have faced similar problems as you at least twice in the past three days. Tonight I went to check my e-mail after reading for a couple hours and my drop-down showed a check next to my network, the AE status light was green, and it looked fine. However, when I went to check e-mail I was not connected and same thing with internet. I finally launched Airport Admin Utility and my base station did not show up in the source list - hmmmm?
    I am a little concerned about this myself because it is frustration. If you push the reset button on your base station while it's still plugged into power and hold it down for five seconds it will go through a "hard" reset (keep in mind this is not the same as a "factory default" reset). Have you done this before? It takes about 45 seconds. When done and the status light is back to green, you can join the Apple network _______ (some strange numbers) from your airport drop down and then launch Apt. Admin Utility. When you double click on your base station from the admin utility it will come up with a list of profiles. It will allow you to select your previous saved profile from a list. Click on your previous profile, click OK, and the AE will reset with your previous settings. This has gotten mine back up and running, but it's a littl disconcerting that it's happened so much
    Any other thoughts out there? Anyone else having these problems and have suggestions for troubleshooting?
    -JB

  • Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

    Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

Maybe you are looking for

  • Camera raw processing issue

    Downloaded photos taken with Canon 5D mk III to ZoomBrowser and Adobe Bridge using Scandisk reader. Photos will not open in photshop CS6 camera raw. Photos taken with Canon 7D will open fine. Is issue with camera or PS CS6?

  • SQL Developer 1.5.5 can't connect to Oracle XE 10g

    SQL Developer get an error ORA-00604 and ORA-12705 Cannot access NLS data files or invalid environment specified. How to connect to database?

  • Cannot re-install OS

    A client of mine recently gave me one of their old G4 computers. I was told that they did not know the password of the admin account, but they did have the password for the standard user account. I did not care, because I just figured I would replace

  • Elements 12 Photo Editor crashes

    Hello. I purchased Photo Elements 12 today via Amazon to use on my desktop running Windows 7. The dowload went fine, as well as entering the product key. When the install was complete, I tried to use it, but it told me that my trial had expired  and

  • Ventilador lenovo Z-40 70 dejo de funcionar

    Buenos Dias Recientemente mi equipo lenovo Z40-70  dejo de funcionarle el ventilador, como estoy seguro de esto pues con la opcion de elminacion de polvo del energy manager al accionarla el ventilador no responde no suena, tambien he notado que la te