Best Compresion Codec for a Website ????

hey guys i am trying to create a web site for children like a story book. what is the best compreson codec in keynote for the web interactive slideshow. what i have at the min is a 800*600 show with anination and transtions on each slide. there is 10 slids in tota. best compresion i can get for this is cinepack at 35mb any ideas . dep need help

Try this thread
http://discussions.apple.com/thread.jspa?messageID=4270578&#4270578

Similar Messages

There were no results for Help using best converion codec for .mts 17Mbps video. I want to use h264.

There were no results for Help using best converion codec for .mts 17Mbps video. I want to use h264.mov, but i get much better quality on my tv using mpeg-2. Am i doing something wrong during the conversion to h264? this is driving me nuts. I thought h264 was the best quality codec to use for any hgiven bitrate, but I'm getting a poorer result. can anyone please help?

Here are my current settings. I really hope they work.. I'll post results later.
Thanks again

What is the best iMovie codec for iDVD quality

Hello all,
I am importing analog video from an Alchemy pci card in MPEG4.
I've played around a bit but would like to know what you think is the best codec for my iMovie import that will then yield the best quality video end product from iDVD.
I am currrently using the dv codec.

yepp, that is the right choice, iM uses internal the dv-codec, same is with iDVD
any other codec has a much higher compression =>lower quality
does your pci card offer the export in dv too? would be much better in terms of pic quality, any mpeg flavor is meant as transport or playback format, not for editing/converting....

Whats the best video codec for adding movies to iwev

I want to add movies but need codec and video size for optimization

iWeb uses QuickTime formats.
H.264 video and AAC audio are probably best choices.

Best as3 approach for this website...

Hi everyone!
This post will be a little bit long and I thank you in advance for the patience and help. Sorry for any (or all) English errors. I'm brazilian.
Well, I want to reconstruct a website I have but now using as external .swf and .as files as I can. Also I need to change the way it works.
I have problems with loaders but I'm decided to dive into the subject and put it into practice here, for the first time.
The website will be really simple and here I have a scheme I just made to help you understand what are my doubts.
How this is going to work?
- When the user clicks a button, the current section will slide out (maybe unload?) while the new section slide in. This is the basic functionality.
- The website will have a home page when the user clicks the company logo.
- In the scheme you see all 4 sections but only one will be visible. The others will be hidden by a mask.
To start, I guess the best thing I can do is built each section in a separeted .fla file to have 4 external .swfs to load.
Then I thought about loading all 4 sections inside a sprite container. Then, "onSectionClick" slide the sprite to the right X position to show the correspondent section.
Now, what's the best approach to achieve that? The obvious is that each section should load only when the user clicks a button. Should each seaction has its own loader? When is the user going to see the message "loading section" or progress bar? Should I slide the section in onLoadingComplete or should I slide it in and show the message/progress bar? Should I unload the current section when that slide out?
I also thought about working with two sprites. One to loadSection and slideIn and another to load another section. Then, onSectionClick the currentSprite slideOut while the other slideIn and on background the first sprite unloads its content, change its X position and get ready to load another section when requested.
I think that's all.
I have this thing working but it's terrible because all sections load at once and there's no loading progress or whatsoever.
And thanks again!

thanks kglad!
So every section will become a distinct part of the site.
I was really thinking about making every section an external .swf instead of exporting movieClips from stage (linkage option). Which one is better?
As I said, Andrei helped me with the loading process. Actually he's still helping me but with what he already taught me I think I'll be able to do the loading thing.
Anyway, to make my life easier, imagine that all sections will tween to stage from the right side of it... to do that I'll have an onLoad method that will run when the loading process has finished. This method will call other two methods, slideOut and slideIn.
slideIn will only bring the loaded .swf loader on stage (from the right side) while the slideOut will push the current .swf out of stage (to the left side), unload it and finally be positioned at the other side of the stage (right) to receive the next section when requested?
Is this the best way to do this?
I think this is so confusing that not even you will understand what I'm trying to say.

Best Practice Codec for Prompts on UCCX 8.5

Hi
I currently have a UCCX 8.5 cluster on promises with all the prompts with Codec G.711. Also, the UCCX is using the Codec G.711.
The company is requiring to change the system to codec G729 which will allow us to reduce bandwidth consumption as we have all our agents connected remotely over a MPLS Network. In addition to that, we don't local resources for transcoding. The transcoder are centralized in the same place as the CUCM and UCCX Platform.
Therefore, first off, what would the impact on changing the system and the prompts to G729, and secondly, what would be the best practice in this scenario.
I really appreciate any help.
Thanks,
Alexis

Hi Alexis,
Please check the following post for similar query
https://supportforums.cisco.com/discussion/10732576/design-consideration-uccx
HTH
Manish

What is the best HD render for a website's background?

I have created a moving background and I am rendering it in PHOTO JPEG format but when I convert it to .GIF to post it on my website, it takes away all the high quality. It is a moving background, what is the best format to render it in to post it as the website's background?

Sorry, but that is totally insane and contradictory because quite simply it's not technically possible. Either you live with the reduced quality and limitations of an animated GIF or you use a static background. And even then I would predict that your GIF fiel may be way to heavy for web site use. You really need to reconsider your strategy and read up on web design in general. this simply cannot work the way you want it to.
Mylenium

Best Export Codec for Monitor Viewing

Hey everyone.
A quick question i hope, i am giving a presentation and showing some video clips i have edited using FCP Studio, i am having a problem however when exporting. All the video export files are very low quality; they appear very jagged with very pronounced horizontal lines across the image no matter what size i view them at.
I have tried using different codecs, but none as yet really give me any better results, can anyone suggest any codecs or any advice relating to this matter.
Thanks in advance, regards, James.

what are the captured clips settings? highligt a clip in the timeline and press Cmd-9 ... tell us what it says under Format tab for:
Vid Rate, Frame Size, Compressor, Pixel Aspect, Anamorphic and Field Dominance
what are the sequence settings? with the timeline or canvas window active, press Cmd-0 ... tell us what it says under General tab for:
Frame Size, Pixel Aspect Ratio, Anamorphic 16:9, Field Dominance, Editing Timbase and Compressor
finally, exactly what are the settings you are using for your export ? give us all the details equivalent to the above ... also tell us how you are doing the export (Quicktime Movie, Using Compressor..., Using Quicktime Conversion...)
thanks
Andy

...last question : what's the best quality codec for exporting a clip?

I have to export a Motion clip with the best possible quality (with no loss of image or compression whatsoever).
what do you guys suggest? H264? or is there any better codecs? (I noticed that H264 create 'bleeding stains' on gradient backgrounds...)
thats all, many thanks

Animation codec
Peter

Best export codec for details

I have some footage we shot of a guy against a green screen. It looks fine in premiere but so far any kind of codec I try to use to export the movie ends up losing a lot of detail. It just ends up with a very soft, somewhat blurry look to the guy. I've noticed this before whenever I've tried to export from premiere. What is the best codec to use to keep as much detail as possible? Thanks.

Nevermind. After much experimenting I found it was due to exporting at the wrong pixel aspect ratio.

What is the best HD codec for uploading videos to youtube?

Also, what is the aspect ratio, pixelation, resolution, and color depth for that codec?
Message was edited by: General Oswald

http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132460

Best Hosting Service For Email/Website (#spam issues)

I've been using GoDaddy for webhosting and email hosting for a few years.
I've been having spam issues with every site and email I've setup with them. It's apparently a notorious issue with GoDaddy specifically, you can find loads of threads on it all over the net and GoDaddy closes the threads that people start on their own help forums.
I do nothing that could cause spam triggers. I don't send out mass emails, no subscriptions, newsletters, no links, nothing. Its literally nothing but responding to customer inquiries and VERY often they go directly to their spam/junk folders which of course is very very bad.
Can anyone recommend the best hosting service so this does not happen? Or anything I can do to help the situation? I have no problem paying a premium monthly for something that will guarantee (or at least as much as possible) that my mail actually gets delivered.
Is there any hosting service or service in general that is considered the best of the best?

harryhood wrote:
that my mail actually gets delivered.
Is there any hosting service or service in general that is considered the best of the best?
Never heard that there was a specific problem with GoDaddy and spam.
Spam is a fact of life. Getting your mail delivered has nothing to do with spam.
If you use Mail and a POP account fro getting your mail, try something like SpamSieve, this will eliminate about 99% of spam in short order.
Gmail has a fairly good spam filtering for email only. You could change email accounts and not rely on GoDaddys email service, just set it up so it forwards to a gmail account to take advantage of their filtering/
Message was edited by: leroydouglas

What is the best video codec for use in Keynote?

I need to play some videos in a Keynote presentation. They can be 320x480 if necessary. Is there a recommended codec to use that minimizes playback stutter, dropped frames, bad audio sync and crashing the program?

David,
I also am having trouble with video in Keynote. I tried MPEG-4 and H.264 at 640 x 480 x 29.97fps (the "Web Download - LAN" setting in Compressor), but I always get pretty bad stuttering on playback. Is there any magic compression setting I'm missing here?
I'm playing it back on various machines with the same results - 1Ghz G4 iMac / 1.3 Ghz iBook / Dual 1.42 Ghz PowerMac. None of them have super beefy memory (512 - 768MB) but I'd think the stuttering issue would be with the processor not being able to keep up, no? Or is this task handed over to the video card?
The luck I've currently had as been with the Motion JPEG video codec. IIRC, it is supposed to be very light on the processor during playback so the overhead of Keynote doesn't seem to affect it as much. The trade off is the video files are huge.
Thoughts?

Best Codec for WMV?

Wich is the Best Quality Codec for .Wmv? (1080p or 2k) I need to know (only for that format) for my work.
The videos always loss quality,and there are visible pixels.
Please if anyone knows, please tell me, and also how to get the codec if it doesnt appear on the software by default (hope it's free).
Thanks in advance, i'll be waiting for any reply

You're gonna laugh.. but years ago I bought the first " videoblaster " card and actually 'captured' video with it from cable tv....( at 15 fps , dropping every other frame basically )... and had a lot of fun with it.. and that was when AVI was introduced...
=======
Audio Video Interleaved (also Audio Video Interleave), known by its initials AVI, is a multimedia container format introduced by Microsoft in November 1992 as part of its Video for Windows technology
======
So , anyway, just cause it's " microsoft " doesn't necessarily mean it's junk...

Best capture codec?

What's the best capture codec for MPEG-2 HDV (HDV1 format, 8-bit, 19.7 Mbps), with the ultimate goal to send it to my client's drive as a DV/NTSC Quicktime file, 16:9, 853 x 480?

I guess I'm not being clear.
A San Diego production house hired me to do a shoot for their client. That client wanted it shot in HD, for whatever reason.
I sent the tapes to SD, they can't capture them into their FCP system, again for whatever reason (I've broached this topic on other forums).
I can capture the video fine on my FCP, so they're sending the tapes and a drive to me so I can capture the video to their drive and send it back, maintaining the full-res 720p30 video.
Yes, they did ask for "DV/NTSC."
Does this mean they don't know what they're talking about?
I suspect it's for the end client's website and he just thought "HD" sounded cool.

Best Compresion Codec for a Website ????

Similar Messages

Maybe you are looking for