Best Compression for Exporting XDCAM EX 1080p30

I have a 6 minute timeline of XDCAM EX 1080p30 footage, and I have a couple questions as to the best method(s) for exporting:
1. Assuming I can play the HD version using a computer and projector, I plan to export using QuickTime Conversion. Ok so far? If so, would you suggest that I select the XDCAM EX 1080p30 compression option, or some other codec? (File size is probably not an issue because the piece is so short, so I'm not as tempted to use H.264 as I otherwise might be).
2. Assuming I need to burn an SD DVD, I plan to send to Compressor and use the Best Quality DVD setting there, without modification. Sound good?
Any other advice or suggestions welcome. Thanks!

You could try ProRes and get the person with the other computer to download the decoder needed to play with QT.
http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
G.
PS. For windowz:
http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forWindows

Similar Messages

Best compression for exporting large files from iMovie for use in iDVD?

I have a doco that I've made as separate projects too slow to make it all in one project - which I then exported as Quicktime .mov files. When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed.
What would be the best compression to apply to the large .mov files but reduce the overall file sizes by say 10%
Its sometimes taking up to 6 hours to render each project average total screentime per project is about 70 minutes and each project file size ranges from 1 to 6GB...
I feel like I'm a little out of my depth on this one!
Any suggestions for this dilemma?
Thanks
Tony

When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed... Any suggestions for this dilemma?
Not sure if your 4.7GB reference is for the source files or the resulting "muxed" MPEG2/PCM encoded content. In any case a single layer DVD is limited to 4.7 GBs of total content. To be safe, this usually means you are limited to 4.2 to 4.3 GB of encoded movie and/or slideshow content depending on how many and what type of menus you are creating created. Thus, if you are encoding for a single-layer DVD and your project encoded content exceeds the capacity of your DVD, then this would likely explain your problem.
If your project size reference is for the source content being added to your iDVD project, then it is totally irrelevant and you need to concentrate on the total duration of your iDVD and the method of encoding instead of file size. Basically, for a single-layer DVD, only about 60 minutes content can be encoded using the "Best Performance" encode option, 90 minutes using the "High Quality" setting, or 2 hours in the "Professional Quality" encode mode. Thus, if your content duration exceeds the capacity of your encoding mode here, it would likely explain your problem.
In either case, the solution would be to either burn to higher capacity optical media/higher capacity encoding mode or burn your content to multiple DVDs as individual projects at the current media capacity/encoding mode.

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

Best Codec for exporting animations with alpha channel from FCP timeline

Whats the best codec for exporting animations (hopefully using loseless compression) that will retain alpha channel, and use the current sequence settings for fps and size?
Currently Im exporting image sequences, but I'd prefer a wrapper.. I don't know much about the 'Animation' export codec.. I did notice that set to current size had some funky value of 753x450 or something.. instead of my current project size of 1920x1080...
Anyhow.. Just seeing what others are doing..
basically Im reading out some titles that I'll end up dropping over video later.. but since they render out so slowly (**** lower 3rds is slow) Im trying to get a jump on the process..
Tx..

PNG should do it. I think PNG is lossless (that's what they say, anyway). But realistically, if you use PNG, Animation, or JPG2000 set on highest quality, I'd dare you to tell a difference.
I use PNG because it's supposedly lossless, renders twice as fast as Animation in a FCP timeline, and is usually about half the size.
If you use "Export Using Quicktime Conversion", you will need to check all of the settings manually to make sure they match your sequence settings. This is always true, no matter what codec you use.
If that sounds risky, your other option is to go into your sequence settings and change the codec to the one you want to render to (this will probably turn your whole timeline red), and then choose Export -> Quicktime movie.

Best Practices for Export

I have recently begun working with a few AIC-encoded home movie files in FCPX. My goal is to compress them using h.264 for viewing on computer screens. I had a few questions about the best practices for exporting these files, as I haven't worked with editing software in quite some time.
1) Is it always recommended that I encode my video in the same resolution as its source? For example, some of my video was shot at 1440x1080, which I can only assume is anamorphic. I originally tried to export at 1920x1080 but then changed my mind as I assumed the 1440x1080 would just stretch naturally. Does this sound right?
2) FCPX is telling me that a few of my files are in 1080i. I'd like to encode them in 1080p as it tends to look better on computer screens. In FCPX, is it as simple as dragging my interlaced footage into a progressive timline and then exporting? I've heard about checking the "de-interlace" box under clip settings and then doubling the framerate but that seemed to make my video look worse.
3) I've heard that it might be better practice to export my projects as master files and then encode h.264 in Compressor. Is there any truth to this? Might it be better for the interlaced to progressive conversion as well?
Any assistance is greatly appreciated.

1) yes. 1440 will display ax 1920.
2) put everything in a 1080p project.
3) Compressor will give you more options for control. The h264 from FCP is a very high data rate and makes large files.

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Best codec for export from FCE?

Heya, I'm sort of a newbie, so please be patient with me
I'm trying to export a video from FCE using QT conversion. I'm going to be putting it on Youtube. What is the best codec for export? I've always heard that H.264 is the 'best', but my videos have always been pale and washed out. I tried exporting using MPEG-4 video, and it's not washed out. Is H.264 better and I should just deal with the paleness, or does it not matter too much?
Thanks

All the Web video sites re-compress your videos. So it's generally best to upload high quality files – typically determined by bit rate.
My suggestion would be to export as a Quick Time movie at current settings. (Guessing that you edited an AIC sequence,)
If you don;t have MPEG Streamclip, do a search and download it. In Streamclip, open the file you exported from FCE. Export to Quick Time. For Compression, choose H.264 from the drop down menu. Don't change Frame Size. If your movie is interlaced, check De-interlace. Check the Limit Data Rate box and type in 12,000 if the size of your movie is1080; 6,000 if your movie is 720; 3,000 if your movie is 480.
Use the YT uploader and you should be good to go.
Russ

Best practice for exporting a dps folio so a third party can work on it?

Hi All,
Keen for some thoughts on the best practice for exporting a dps folio, indd files, links and all, so a third party can carry on the work. Is their a better alternative to packaging each individual indd file and sharing the folio through adobe?
I know there have been similar questions here in the past, but the last (that i've found) was updated mid 2011 and I was wondering if their have been any improvements to this seemingly backwards workflow since then.
Thanks in advance!

Nothing better than packaging them and using Dropbox to share. I caution you
on one thing as far as packaging:
http://indesignsecrets.com/file-packaging-feature-can-cause-problems-in-dps-
workflows.php

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Re: Best options for exporting a sequence and making a DVD

I using iPad 2.

"Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Best compression for video with a lot of static text and graphics

Hello! I am producing an instructional DVD and am getting ready to output the files and was wondering what the best compression format would be for me to use.
About 1/3 of the clips consist of video shot in SD with very little movement (guy sitting at a desk talking to the camera.) The rest contains graphics created in After Effects and then imported back into Final Cut. The graphics are primarily text based, and don't change too often. There are some still images as well, but they are static for the most part save for some occasional panning. Oh, and the total length of all the video clips is about 70 minutes.
I would like to compress these videos so as to get the best possible quality in the text. I did a few tests, but the quality in the letters seemed a little worse than I had hoped. Is this just going to be an inevitability I have to live with, or is there a particular setting that would help me out?
Thanks for reading this; any help would be greatly appreciated!
PowerBook G4 Mac OS X (10.4.7) 1.25 GB DDR SDRAM

You know--I really have no idea why I didn't do it that way. I exported uncompressed files from After Effects and then imported them into FCP; some of the files are huuuge, like 60 GB+
I think in the next version of this I will probably just edit in FCP then import it into AE, and then export from there. As it stands though, I've sort of made some changes and done stuff in FCP after importing the clips, so I'd like to just export using Compressor.
So are you saying it's better to export uncompressed from FCP and then import that into Compressor and go from there? I've been just selecting the 'Export Using Compressor' option in FCP and going from there...
Thanks!

BEST COMPRESSION FOR DVD

HI,
I want to find out the BEST compression setting for a FCP project that is 1hr and 41min. I'm burning it to a DVD that is 120min long. It's NOT HD. And it's going to be shown on a wall when it's finished. What are the best settings for this?
Thank you for your help.
Andy

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Best Compression for Exporting XDCAM EX 1080p30

Similar Messages

Maybe you are looking for