Best compression of video for use within dvd studio

i am doing a dvd with lots of 1 min clips to choose from - what is the best method to give me the highest quality of video within the project? do i use compressor's dvd settings or is there a better way to do it.
thanks
mr C

It all depends on the total length of footage you plan to include. A bit budget is crucial before an encode.
http://www.videohelp.com/calc.htm
Once you have the correct bitrate you can set it up in Compressor. However, it my depend on the type of footage you have as well. Compressor VBR isnt very good so a CBR encode might be a better option. Basically, there's no objective answer.

Similar Messages

  • DVD Compressor setting for use in DVD Studio Pro

    I'm trying to create a playable dvd that has using dvd studio pro. However I want to compress the .mov file using compressor first. I've tried several setting, ut I get the same blurry text and graphic results.
    What's the best setting for a hi quality dvd, the same quality has professional dvds.
    Thanks in advance for any help.

    The best one you'll get with Compressor is DVD Best Quality 90 mins. Tweak it any higher than that and you run the risk of drives refusing to play the disc.
    You can't make it look like a professional DVD because the pros don't use DVD Studio Pro. They use significantly more expensive software and encoding hardware, and the discs are replicated, not burned.

  • Converting Unix Executable Files for use in DVD Studio Pro

    I have several projects that were created in iDVD 2 back in 2002. In Finder, the file kind is listed as Unix Executable Files. If I add the extension .dvdproj using Get Info and try to open them in DVD Studio Pro, I get the error Wrong File Format and it will not open the project.
    The machine I am currently using does not have iDVD on it.
    Does anyone have a recommendation on a way to make these files usable for DVD Studio Pro? I understand if it is not possible.

    You can import iDVD project into DVD Studio Pro, however I think it won't work with projects from iDVD 5. I'm not sure about iDVD 2. Also these files have no extension and are listed as Unix Executable Files.

  • What is the best external typing keyboard for use with logic studio?

    I'm currently using Logic 7 and looking to upgrade to Logic STUDIO.
    I want to get a nice typing keyboard with coloured and customised keys (short-cuts) to use in place of the MACBOOK keyboard.
    I have previously bought the stickers from Editors keys, but there key command sets suck.
    Hoping someone can suggest a better company offering a better product with more intuitive key command settings so that it matches well with LOGIC STUDIO - assuming its been simplifed with its work flow, I want a typing keyboard to match.
    Also is it worth gettinga jog wheel to use in place of or in addition to a mouse - I think this is called a shuttle.
    Anyway please send your suggestions through.
    Thanks

    I believe that there are keyboard overlays for Logic available for the Apple Keyboards... although, I don't think there's anything for 8 yet, seeing as the release probably took them by surprise.
    However, I do agree that using a wireless keyboard and mighty mouse are must-haves... at least in my studio. They allow me to work at my piano and control Logic from a distance (I don't like assigning MIDI commands, outside of my control surface). However, I do with that Logic would recognize the presence of a Mighty Mouse and allow assigning the remaining button presses to other features in Logic, like showing the floating toolbox while the right-click handles the contextual menus.
    jord

  • Building an AppCloud App for use within your organization only.

    I am re-posting this from, Register your App because, it was a good point this should have been a separate discussion.
    Scott
      Scott Kent Jul 14, 2014 4:56 PM
    I am trying to get more details on how to Build/Register "Private" AppCloud Apps and confirm at design time that we can deploy our in-house AppCloud Apps on several of our Eloqua instances without publishing them.
    My assumption is that one would setup the App under the Provider section for each of the Eloqua instances so that each Eloqua Instance can see and install our our in-house private app and use it without publishing. I worry about this method because it give the impression the AppCloud App is in development or testing.
    Or
    I was hoping there was some way to officially register our app so we are using a production workflow but our app is not published or listed anywhere?
      T.J. Fields Jul 14, 2014 6:06 PM (in response to Scott Kent)
    Hi Scott,
    The best practice here would be for you to:
    1. Register as a Provider in a development instance of Eloqua.
    2. Build out your app and Register it, along with your Service(s) under that Provider.
    3. Whitelist any Eloqua client installs that you wish to allow to use your App.  Do this by clicking the Publish to Another Site button.
    4. Give the App install URL (found at the bottom of the App Details page under Catalog) to any of those clients that you whitelisted to use your app.
    This way, only those clients that you've specified will be able to install and use your App, and it's not listed anywhere.  You could also click the Publish to App Cloud button, which simply whitelists every install.  The App will never actually be listed anywhere, as there is not yet a mechanism in the framework to do this.  The only way to find and install your App is by using that install URL, so you'd have to give it out.
    If you are a client that is building an App for use within your organization, you could also use your company's Eloqua install to register your provider, but as a development partner, your developer instance is intended to be used to register and manage your services.
    Hope this helps.

    Thanks, scott.kent ! I'm sure many will benefit from your great post!

  • How do I create/host interactive articles with embedded video for use in browsers?

    I'm seeking a little guidance -
    How do I create/host interactive articles with embedded video for use in browsers?
    The aim is to bring together video, design, images and writing in one place. A little like Born Presents, but very accessible and user friendly.
    I'm happy using InDesign but want to create interactive articles / magazines that have embeded video files as required. I've been looking at .SWF files but I've come unstuck.
    I want people to view the articles via a blog, ideally with them opening in a lightbox style viewer. It's not intended for tablet viewing and people should be able to view and interact with the files with little effort on their part.
    I think I know how to create these files within InDesign, but I'm not so hot on web design and I'm not sure how to host these online. Does this start coming into the realms of Flash?
    If anyone could point in the right direction I'd really appreciate it - Thank you in advance.

    PDF is one thing. Folios for DPS is another. There is a little bit of
    overlap but not much.
    The interactivity in the folio overlays panel is for DPS only.

  • Extract closed captions from OTA HD broadcast for use with DVD SP?

    Hi, I'm out of my league here, trying to do a favor for a deaf friend. He will appear on a national TV show, and I'd like to capture his appearance and (if possible) burn it to DVD.
    Of course, being deaf, he needs to see the closed captions.
    What I've done so far is buy Elgato's eyeTV Hybrid. I can successfully capture HD broadcasts with their embedded closed captions (wow, is that gorgeous!).
    I can use the eyeTV software to recompress the audio and video for DVD SP, but the captions don't end up anywhere that I can tell.
    Is there any way to extract the closed captioning information for use with DVD SP?
    Thanks very much.

    I don't think FCP will ever have captioning tools, due to it is a specilized area of post production and third party companies have developed captioning software that addresses this area.
    I use the only Mac captioning software, (Mac Caption, made by CPC) that runs on the Mac. The cost for the SD captioning version of Mac Caption retail cost $6,995 USD and the HD version is an additional $2000.00 USD. If your an educational institution, then the price is about half the list, (price can be negotiated with the company at the time of purchase.)
    As you can see, this is about half the cost of the FCP suite and I really don't think that Apple will ever get into this area. Most production companies rely on captioning services. In our case, we are an educational facility and therefore must comply with ferderal law, so we caption everything we do, thus why we had to purchase our own software.
    The software we use, can do what it is that you are seeking, it can read the caption data from a live video image an convert it to a .scc file, that can be then used in DVD authoring or tape production. It can also read the raster area of a 720x 486 video file and also convert the caption information to a .scc file, as well as creating subtitlilng .stl files for DVD's.
    It can also do original captioning, as well as add a text track to QT streaming files, which is how you caption QT steraming files. You can even burn captions into the video image of a steaming file.
    Again, most production facilities are going to have to rely on a captioning service, but because we have to caption everything, and most captioning services don't caption QT streaming files, this was another reason we had to purchase our own captioning software.

  • Converting Nokia N95 MP4 videos for use with Premiere Pro?

    What would you say the best way to convert Nokia N95 MP4 videos for use with Premiere Pro is?

    Sheesh.
    This "
    How do I convert my files?" entry at the PPro Wiki might offer some insight.

  • Converting video for use on Sidekick

    Good evening.
    This might not be the right place to post this, but here goes...
    I have a 24" iMac and would like to convert videos for use on my Sidekick LX 2009. The info on the Sidekick says it will play 3GP or MP4 (simple profile). I been trying to convert using VisualHub and HandBrake but to no luck. Any suggestions on how I can do a conversion, or what settings I need in these programs, or some other program to use?
    Thanks for the help.

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (26235)

  • Converting video for use in The Sims 2

    Hi, I have been trying to figure out how to convert video for use in The Sims 2. I have QuickTime Pro, and I am able to export to AVI format, and all I need to know is how to change the resolution. I've looked all through the settings with no luck. Thanks for the help.

    Hi, I have been trying to figure out how to convert video for use in The Sims 2. I have QuickTime Pro, and I am able to export to AVI format, and all I need to know is how to change the resolution. I've looked all through the settings with no luck. Thanks for the help.

  • What is the best way to export for use on internet?

    what is the best way to export for use on internet?

    It depends. Is this for a personal web site or for a site like YouTube, Vimeo or Facebook?
    For YouTube, Vimeo and Facebook, use Publish & Share/Computer/AVCHD using one of the YouTube presets.

  • External Hard Drive for PowerMac G5 for use with FCP Studio

    Hello,
    I'd greatly appreciate any recommendation for an external hard drive for a PowerMac G5 for use with FCP Studio.
    Thanks.
    -graziemile

    We see alot of Lacie issues here and elsewhere.
    Drives fail... period. I believe you hear more about Lacie drives failing because they sell a ton more of them than many other suppliers. I've got 8 of em sitting right here on the desk and two more at the second station. I've lost one since I started using them years ago (and it had problems right out of the box) and I use them pretty heavy.
    I understand that they use several different brands of drives in their enclosures, but from my experience they must have pretty good QC standards for what they package.
    The guy said the G Techs were a little overkill for his needs. Lacie doesn't pay me. But if someone asks "how are Lacies?" I'll tell them they've been great for me and many others I know, especially if your requirements are capturing DV.
    In five years, I ain't heard anybody say anything about it.
    As for FCP. I love it! In 20 years of business, it's probably the purchase that's given me the most bang for my buck. But if you haven't heard people knock it, you've never met an Avid zelot, bruhhhhh, just the thought gives me shivers.
    The drives X mentioned are designed for video work.
    What Studio said, well he gives out some of the best advice on this board
    (and maybe the most! ) and my reply to his post... that's why I used the little smiley face. No offence intended X.
    I only meant to say that, in a world where software like FCP can do what it does at the price it does it, and drives like Lacie and G Tech can give you the storage they do for the price they do, the line between consumer and professional products is easily blurred.
    rh

  • Creating DVD Chapters from within DVD studio Pro

    Hey,
    Is this possible? Can we create DVD chapters from within DVD Studio Pro?
    Chris

    Yes, you can add chapter markers in the DVDSP timeline, although they are not frame accurate as they are in FCP. You'll typically get them within about half a second as they can only sit on a 'GOP' boundary, and these occur roughly every 15 frames equivalent.
    To add a marker you move the playhead to where you want it and type the 'm' key, pretty much as in FCP.
    The chapter marker then defines the start of a chapter for playback. You can manipulate the navigation such that only one chapter plays before you go back to the menu, or you can start at a marker and continue onwards. You can even create lists of markers that are not in track order and have playback jump about between them, although it's not always wise to do so!

  • How to fix " insufficient disk space for encoding" on DVD STUDIO PRO 4

    I keep getting the error message, "insuffiecient disl space for encoding" on DVD STUDIO PRO 4. I  reinstallled the program, uptaded software and also cheked the library receipts file. After the reinstall I am still getting the same message. Can anyone tell me how to fix this?
    Thanks

    Thank you for you help, however I think you misunderstood my question
    I have 800 gb on my Mac hd
    I am getting this error message when I go to build and format the dvd. This is after compression encoding.

  • Export settings for quicktime movie to use in DVD Studio Pro

    The workflow:
    I created a movie and did extensive sound adjustments in iMovie and a few video edits, and exported it to a quicktime format:
    compression H.264
    Quality: High
    Frame reordering: yes
    Encoding mode: multi-pass
    Dimensions: 1280x720
    Since then I upgraded to FCS, and tried to create a DVD with DVD SP and import the movie, and I get this error:
    Import error:
    One or more files failed to import. Common reasons for this are that they do not match the current project's video standard or their file format is not supported.
    I'm fairly sure I have matching video standard...and the file format has always been supported before.
    I imported the quicktime (.mov) file to FCP and added some edits, recreated the chapter markers, and early on there was a pop-up that said my movie format did not match the project settings, so I checked the "okay" to adjust the video file to match.
    When I finished, I exported the file from FCP to a quicktime movie with the "current settings" that have always worked with DVD Studio Pro before, and I'm getting the same error.
    I don't know where the problem is.  Both the original movie I created in iMovie and the movie I recreated in FCS will import to iDVD.  I wanted the better quality production from DVDSP....
    I no longer have the iMovie project file.  (I thot I was done.)  I do  have the original footage, but I'm already three days in and hoping to  avoid starting over.
    I would sure appreciate any help!
    Thanks!

    2cute2b2smart wrote:
    I don't know where the problem is.
    compression H.264
    Quality: High
    Frame reordering: yes
    Encoding mode: multi-pass
    Dimensions: 1280x720
    The specifications you listed are the problem.
    I can't comment on iMovie -don't use it personally.
    From FCP, you would export a self contained movie using the current Timeline settings (not H.264 ever)
    Bring that file into Compressor and apply one of the time based DVD presets that the running time of your movie fits into. This will produce a MPEG 2 video file and an AC3 audio file. Bring both into DVDSP and author.
    A DVD video is always standard def 720x480 (NTSC) or 720x576 (PAL).
    Converting the output from FCP to H.264 is adding an unneeded compression stage that will compromize quality -because DVD assets are always MPEG 2 / AC3. Even if DVDSP accepts that H.264 file, it gets transcoded again using DVDSP's own compression system.
    All of this is covered in the DVDSP user manual. Take the time to read it. DVD authoring is complicated if you just jump in and start poking around, simple if you take the time to understand the basics.

Maybe you are looking for