Best configuration settings for WRT310N

Hi,
I'll be installing a cable modem in the next few days and would like to connect my WRT310N to it. I was wondering what would be the best settings to use.
Main uses:
- Distance from WRT310N to other devices is around 8 meters, separated by 1 concrete wall
- Stream music/video from PC to iPad and another laptop wirelessly.
- Transfer files between devices
Your help much appreciated.
Thank you
J

There's not much to change when you get cable internet. Just make sure you are using WPA2 for your wireless network and that you have set it to broadcast a Wireless N only signal (if all your devices are compatible with wireless N).
You could also set the channel width to auto to see if the router changes to 40mhz mode (check in the wireslly status tab) which means more bandwidth (usually).
If you are experiencing really slow wifi speeds then you can try changing the wireless channel to 1,6, or 11, but if you are going through a concrete wall, then you'll see a natural decrease in speed.
You can also use a tool called inssider to make a more accurate channel choice which doesn't overlap too much into other channels.
I don't work for Cisco. I'm just here to help.

Similar Messages

ChangeConfigurationByName fails with "The specified configuration settings for Settings are invalid."

Hello,
I am tryint to update deployment and always have following error
"The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers."
Have found similar
thread and
stack overflow - without any success. I am not chaning anyting. Just reading deployment configuration and tryint to update with the same settings. I use .net azure sdk wrappers to generate requests. Code looks like:
var deployment = client.Deployments.GetByName(location.DataCenter, location.Cluster);var result = client.Deployments.ChangeConfigurationByName(location.DataCenter, location.Cluster, new DeploymentChangeConfigurationParameters{ Configuration = deployment.Configuration});
Catched request response from fiddler:
POST https://management.core.windows.net/[subscription-id]/services/hostedservices/[service-name]/deployments/[deployment-name]/?comp=config HTTP/1.1
x-ms-version: 2013-11-01
User-Agent: Microsoft.WindowsAzure.Management.Compute.ComputeManagementClient/0.9.0.0
client-tracking-id: 2
Content-Type: application/xml
Host: management.core.windows.net
Content-Length: 544
Expect: 100-continue
Connection: Keep-Alive
<ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
<ExtendedProperties />
</ChangeConfiguration>
Response
HTTP/1.1 400 Bad Request
Cache-Control: no-cache
Content-Length: 351
Content-Type: application/xml; charset=utf-8
Server: 1.0.6198.51 (rd_rdfe_stable.140226-1543) Microsoft-HTTPAPI/2.0
x-ms-servedbyregion: ussouth
x-ms-request-id: dcb1c5aedb5872d4aaf90acfede2de0b
Date: Tue, 04 Mar 2014 13:38:10 GMT
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The specified configuration settings for Settings are invalid. Verify
that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message></Error>
the same data returned by operation status. Decoded base-64 encoded string looks like
<ServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
<Role name="yauhen-ccis2">
<Instances count="1" />
</Role>
</ServiceConfiguration>
Have tried without new line symbols, without xmlns, updating by production. without any success

Hi,
The configuration file is a file with extension .cscfg. If you have Visual Studio, the file is automatically generated when you create the project, and automatically updated when you modify the project's properties.
>> Not sure were could I get content of this file from api?
It's needed to encode this file's content use base64, and put the result in the body of your request. (Please refer to
http://msdn.microsoft.com/en-us/library/windowsazure/ee758710.aspx for more information.)
>> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
However, may I know how you find the body for your request? (It seems you do a base64 decoding, you find it is a valid configuration file, but it doesn't have any configuration settings.) Actually, the settings defined in csdef needed to
be contained in the configuration file.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best export settings for dvd

Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

>require this much memory
Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Best BIOS settings for Kt3 Ultra2 and Geforce4?

Hi,
Can someone tell me what the best BIOS settings would be for my KT3 Ultra2 running a Geforce4 ti4200?
I get crappy scores in 3dMark2001 SE and I have the infamous stuttering/crashing problems in 3D games. I've tried pretty much every configuration of settings and drivers I can think of.
I saw on these forums that the Kt3 Ultra2 can be a bit fussy with GF4 cards. If someone could post the best BIOS settings for performance and stability I'd be eternally grateful.
Alternatively, email me at [email protected] with them.
Thanks in advance

very very similar as far as i can make out

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

What are the best optimization settings for Logic 9....

Hey guys,
I am running Logic 9 on a Macbook Pro 2.53GHz, Intel Core 2 Duo, 4GB RAM, OSX 10.6.4, with a AK1 soundcard. And I was wondering what the best optimization settings for this setup are?
I have been having a few issues with drop outs in sound during playback, which is also carried over when i bounce the audio. I did some research and found my latency settings needed to be higher, so I set the I/O buffer size to 512. I am also running all samples from the local hdd, I was thinking maybe put the samples on an external drive. I also changed Logic 9 to 64bit mode.
Does anyone know if this is right and anything else I need to do with Logic and/or the AK1??

First, return to 32-bit mode. 64 bit still has some ß-issues and some features that are not working/disabled, and the only perk of 64-bit is that Logic can adress more than 4 GB RAM, which you don't have anyway.
Samples on the startup drive is not a problem, unless you start using really big third party sample libraries, or zillions of EXS instruments. Some of the Logic content insists on residing on the startup disk anyway, better leave that where it is.
If you have an external, use that to store your Logic projects, or, in other words, make it your recording disk (as recordings are stored in the project folder). You do record audio too, I assume? Anyway, if you get an external, make it a FireWire one, not USB. FireWire is much easier on the CPU, and +for audio (and sample-) streaming+ more reliable and faster than USB.
If dropouts you hear during playback also show up in the (offline?) bounce, it is probably not a buffer issue, as the buffer is irrelevant for bouncing offline.
So how many tracks and what kind of tracks in this project? Which plugins and how many instances of them?

Configuration Settings for Postal Adress Validation and Duplicate Check

Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor Kumar

Hi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Best audio settings for mp3?

Hi everyone,
I was wondering what are the best audio settings for an mp3 to import into C4?
Thanks,
Tina

Yes Tina,
I had this issue before. here is what i found:
Record at Sample rate 44100 Hz, 16 bit, high quality publish as MP3
Captivate settings at near CD bitrate 96 kbps,
encoding speed 0,
44.100 KHz encoding frequency

How do I get the configuration settings for GPRS mms ect for EE

Hiya :)
My son-in-law got a new iphone4s as an upgrade from EE/orange on Tuesday 18th feb 2014
It was an upgrade for his sim only contract changed to a phone and sim
The first phone he had was a samsung galaxy s3 mini but he couldn't get used to it as had used his old iphone4 for over 4 years before it died
The samsung galaxy s3 mini was sent back and a nice shiny iphone4s was sent out instead and he got it on the date up top
The sim that came with the iPhone keeps saying invalid for some reason?
But the sim he got with the sg3 mini works but has no configuration settings for the iphone4s in it only for the sg3 mini
We have tried online looking for the settings for wap/GPRS/mms/edge ect to send via SMS but can't seem to find anywhere that works?
Can anybody help please?
His partner (my daughter) is expecting there 2nd baby and he wants these set up ASAP
He can recieve calls and make calls and do the same with SMS but no Internet/mms ect

Check out FEBE. <br />
https://addons.mozilla.org/en-US/firefox/addon/2109/

Configurational settings for data source in BI server

Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best printer settings for the Officejet 8625 for glossy label printing

best printer settings for the Officejet 8625 for glossy label printing. The black does not appear dark black ......just shades of gray

pendavinci
Welcome to the HP Community Forum.
The following might be helpful to resolve the issue:
Printing Labels_Business-Cards_Cards
See the section on Printing and Printing Preferences
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

Best color settings for document view?

Which is best color settings for different document formats with the same color profile?
There are Tiff and Pdf documents with same color profile but look different.
Thanks!

Bridge is file browser with custom preview options, but it's not a pre-press examination application. Just don't use it for that purpose.
P.S. First one is the best as far as I see. I don't like ruined «A» in second example. If you want to get more ballance, you can shift the left side also a bit.

Best configuration settings for WRT310N

Similar Messages

Maybe you are looking for