Best conversion application (temperature, currency, speed etc)

What is the best conversion application (temperature, currency, speed etc) that you have found???
Also it is not something that comes with the iPhone 3g right now is it?

I can't speak for what is "best", unless someone wants to give me an unlocked iPhone 3G and ship it across the border to me under cover of darkness. But you should look at what's listed here in terms of iPhone apps and see what you like"
<http://www.ilounge.com/index.php/software/iphone/C254/>, and
<http://www.appsafari.com/category/calculators/page/13/>.
Mulder

Similar Messages

  • Best configuration for maximum WiFi speed?

    Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch.  I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st?  Like I said I am really confused. Any help you can offer would be appreciated.
    Thanks in advance,
    Vic

    For the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
    The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
    This picture may help:
    From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

  • I am trying to install an update of Microsoft office and I get a message that says.  This application must be closed ETC.....   I am running Parralell and I think it is there.  The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

    I am trying to install an update of Microsoft office and I get a message that says.  This application must be closed ETC.....   I am running Parralell and I think it is there.  The two programs are "Microsoft Database Daemon" "SyncServicesAgent".  How do I close these programs?

    If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
    Parallels has a forum here:
    http://forum.parallels.com/forum.php
    I think you'll get a faster response there.

  • Best conversion from P2 for PE 11

    I am hiring a crew that will shoot in P2. What is the best conversion to  use from P 2 for use in PE11. I need to instruct them.
    Thanks, Stan

    I don't do P2, but in another place in the forum I have seen http://gopro.com/software-app/cineform-studio/ mentioned

  • What is the best and easiest way to speed up a Mac-MINI?

    What is the best and easiest way to speed up a Mac Mini without adding memory?

    I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including  log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
    Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
    RAM specs:  2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
    In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
    This should be your Mini -- check other indicators to be sure:
    http://www.ifixit.com/Device/Mac_Mini_Model_A1283
    A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
    Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
    Good luck & happy computing!

  • What is Application Default Currency used for?

    Hi,
    Can anybody tell me what is the use of Application Default Currency when it is mandatory to assign every entity a currency?

    This is not exactly correct. The application currency in HFM is only used as a last resort for triangulating to between the source and target currency. True, it is usually the default currency for the application, but it does not have to be.
    Refer to the Translation process in chapter 6 of the HFM user guide for full details on this.
    For anyone who used Hyperion Enterprise, the default currency in Enterprise is the currency used when no specific currency has been attached to an entity. In HFM this is not the case at all since you must attach a currency to every entity.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Best way to change the speed of a sequence of linked short clips?

    I have a sequenced project of about 150 short 1 second clips linked together via a crossfade transition... I would like to make the timelapse faster. What is the best way to change the speed of the sequence or the clips themselves? I would rather change the sequence for it would be less labor intensive I would imagine!!
    Thanks
    RD

    Or...select all the clips in the timeline, control-click (or right-click) on them and select 'Duration'. Change the duration to whatever will fit/fill the timespan you need, then hit OK.
    If you're needing to change the dissolve as well, you should remove all but one of them first, then drag the remaining transition into the browser. Dbl-click it into the viewer, set the duration of what you want, then use the hand icon at top right and drag it back into the browser. Rename it relevent to it's new duration, then control-click on it and select "Make Default".
    Now, set an inpoint at the first frame of your clips in the timeline, then drag all the shortened clips from the timeline into the canvas and release where it says 'Overwrite with Transition'.
    That's another way to accomplish this.
    K

  • Provide best methodology to improve the speed of the web page

    provide best methodology to improve the speed of the web page.

    Use smaller images.
    Here's an idea.. why don't you explain exactly what problem you are trying to solve... Gee how clever.
    Do you have a page that takes minutes to load? If yes... remove "stuff". That is how to make it faster. There is no other magic way (unless of course the problem is that it takes that length of time to process the page on your server but for the moment we will assume that is not the case)
    What stuff should you remove? Content. Images..... as described above. This isn't rocket science. If you are another one of these self described J2EE experts who has made a page that displays 20,000 database records at one time your page is going to be slow until you remedy your shoddy design.
    But whatever the real problem is the way to make a page "faster" is to remove "stuff" from it. What that stuff is and what you should remove are entirely known only to you... so really asking anyone else is pointless.

  • Load global configurations (currencies, units, etc) into BW using Process C

    In BW side we can load global configurations (like currencies, units, etc) using RSA1, selecting Source System, right click global configurations then load global configurations.
    How can we do it using process chain, so we can make it an automatic process that runs periodically ?
    César

    Sorry for taking such a time to answer.
    As I have no practive, it took me some time to understand how to work with Process Chain using programs RSIMPCURR (Transfer Exchange Rate) and RSIMPCUST (Transfer of Global Settings), specially creating the variants.
    But not clear how to schedulle directly using RSA1 -> SourceSystem -> Transfer Exchange Rate (or Transfer Global Settings) -> menu Program  ->  Execute in Background.
    It brings to me a window Background Print Parameters, where I can define things like Output Device, Print from Page and so on.
    Didn't find anything like defining a periodic run of this loading.
    Can you clear this point ???
    Thanks
    César

  • What is the best way to sync iCal, AdressBook, etc on several devices? (iMac, MacBook, iPad and iPhone)

    I have several Apple devices (iMac, MacBook and iPhone) and I was wondering what is the best way to sync iCal, AdressBook, etc on these devices?
    I have an iCloud acount as well, but how to sync without seeing enteries double (iCal)?
    Many thanks!

    iCloud should not cause duplicate entries in Calendars unless you are syncing using iTunes as well as Wi-Fi. No need for both.
    iCloud backs up:
    Purchased music, TV shows, apps, and books
    Photos and video in the Camera Roll
    Device Settings
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Calendars
    From here > Apple - iCloud - Store and back up your content in iCloud.
    Instructions here >  Learn how to set up iCloud on all your devices

  • Best conversion for the web site

    Hi Folks
    I made a Video with my HD camera and made a nice movie in iMovie HD 6 in 1080i-30. what is the best conversion to view it on my web site. I have tried a few of the settings but none thrill me. all either too small or too square. What are the best settings for wide screen conversion for the web?
    Thanks
    Don

    hey everyone
    just wanted to say thanks, I have been working on my 1st iMovie project and had a few questions and everyone here was great
    I finished my 1st iMovie project yesterday and posted it to the web site today
    http://www.pspartyband.com/Live%20Video%20Clips.html
    I just bought the Cannon HV20 camera on Monday 5/7/07 and shot this Video on Tuesday night 5/8/07. I have never owned a Video camera before and true to the advertisement the canon was just point and shoot and I got pretty decent Video. We passed the camera around to everyone in the band so that everyone could shoot a little and everyone could be in the video. next time I think i'll bring a friend to shoot so we can just play.
    I had no problem at all importing the video from the HV20 into iMovie as some here have been experiencing. I thought iMovie was very easy to use and since I am used to working in Logic Pro I know to hit save every couple of edits, just in case of a crash, which it did a couple of times
    anyway thanks again and let me know what you think of my video
    Don

  • Conversion application

    I subscribed to the $19.99 per year conversion application. I cannot find where to sign in so I can convert pdf documents to docx to fill them in. Each time I click on "Tools" it says I have used my limit of FREE conversions. The $19.99 plust tax have been charged to my credit card. How do I sign in each time to use the pdf to docx conversion feature?
    Thanks.

    You do not mention what application / online conversion tool you subscribed to.
    CreatePDF → http://forums.adobe.com/community/createpdf (forum)
    ExportPDF → http://forums.adobe.com/community/exportpdf (forum)
    Acrobat.com → http://forums.adobe.com/community/acrobatdotcom (forum)
    Sign-in for any of the above:
    https://createpdf.acrobat.com/SignIn.html
    https://exportpdf.acrobat.com/SignIn.html
    https://acrobat.com/SignIn.html

  • BEST CREATIVE APPLICATION 4 BURNING MUSIC & COPYING MUSIC OFF Z.MIC

    Please help me. I just wanna know what the best creative application is to burn music and or copy music off my Zen Micro. I've looked at all the details, but I just don't know which one to choose. All the help, suggestions, and feedbacks will be greatly appreciated.

    I like Zen Micro Media Explorer. It's similar enough to Windows Explorer that I didn't have much of a learning curve to drag & drop files into my ZM.
    I'd rather listen to music than have to spend a lot of time learning how to use new software- I've got enough on my plate with PhotoShop.

  • Best iPod conversion programs?  from AVI, etc. to MPEG-4

    Some of the programs I've downloaded for trial do not work with Vista Home Premium. And if they do work it will only convery a 5MB file or so.
    My question is what is the best program for converting video files for play with an iPod touch while the OS is Vista Home Premium?
    Naything is helpful, thank you.

    Here is the answer posted by jr20079 - a great program, and freeware:
    Heres the super converter
    http://www.erightsoft.com/S6Kg1.html
    (Scroll down)
    Worked perfectly for me!

  • Please help with my Temperature Conversion application

    here's my code that compiles OK:
    BUT, I want the application to return a value of type int, not float, how do I do this, and why?
    thanks
    public class TemperateConversion {
    public static void main (String [] args) {
    double a;
    double b;
    int C=100;
    int F=212;
    a = (double)5./9. * (F-32.0);
    b = (double)9./5. * C + 32.0;
    System.out.println (b + " degrees Fahrenheit is equal to " + a + " Celsius");
    System.out.println (a + " degrees Celsius is equal to " + b + " Fahrenheit");

    hey, this can be done easily by casting the double to int
    public class TemperatureConversion {
    public static void main (String [] args) {
    double a;
    double b;
    int C=100;
    int F=212;
    a = (double)5./9. * (F-32.0);
    b = (double)9./5. * C + 32.0;
    System.out.println (b + " degrees Fahrenheit is equal to " + (int)a + " Celsius");
    System.out.println (a + " degrees Celsius is equal to " + (int)b + " Fahrenheit");

Maybe you are looking for