Best conversion from P2 for PE 11

I am hiring a crew that will shoot in P2. What is the best conversion to  use from P 2 for use in PE11. I need to instruct them.
Thanks, Stan

I don't do P2, but in another place in the forum I have seen http://gopro.com/software-app/cineform-studio/ mentioned

Similar Messages

  • Best conversion of AVCHD for G4

    I"m still using a PoweMac G4 running a Sonnetech Dual 1.67 processor, Final Cut 6.06, Mac OSX 10.5.8 and 2 gigs of RAM. I shoot everything on HDV or AVCHD and batch compress it to DVCPro 50 16:9. However, I have a client that wants me to shoot in AVCHD 1920x1080 and edit it natively, but the budget doesn't include renting or buying a MacPro or Macbook Pro that can edit the footage natively. Can anyone suggest one of the other codecs that I can edit with that will not bog down my g4 cpu? I have MPEG Streamclip since compressor has always given me weird errors. Can a G4 edit Apple Pro Res LT with ease? Looking for some codecs that FCP 6.06 can edit with giving the spinning rainbow every two minutes. Thanks

    Can a G4 edit Apple Pro Res LT with ease?
    A G4 will not edit any kind of ProRes.
    Try DVC Pro HD as a codec. Make sure you put it on a dedicated media drive.
    You will need Clipwrap to transcode the files and it will probably take forever. Good luck!

  • Best Way of Exporting for iDVD when using FCP?

    What would anyone recommend in terms of getting the best output from FCP for making an iDVD?
    I usually export as a self-contained QT movie. Is there a better way?
    J.M. Prater

    There's an easier way... export a non self contained movie. The result will be the same... just faster file export and smaller file to boot.
    DVD SP will make a lot better looking DVD's if you have that. The encoding done through Compressor is better than what can be done in iDVD.
    Jerry

  • About the effect for batch level conversion from material to plant level

    Dears,
    Now  we use batch management at material level in our system, now we want to change to batch level from material level to plant level, what effects or risks it will bring during the process of conversion?
    Thanks a lot
    Zhongkai

    Hi
    check the following SAP help link it is very helpful:
    http://help.sap.com/saphelp_40b/helpdata/es/d2/1d4b6e5733d1118b3f0060b03ca329/content.htm
    at the link you can find the following
    Specify batch level and activate status management
    In this IMG activity, you specify the following:
    the level at which batch numbers are unique
    whether batch status management is active in the client
    the plants in which batch status management is active
    the initial status of new batches
    Batch level
    Batch numbers can be unique at the following levels:
    at plant level
    at material level
    at client level for a material
    If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
    To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to numbers within Inventory Management using a transfer posting 'material to material'.
    If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
    When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
    Standard settings
    In the standard R/3 System, batches are unique at plant level.
    Activities
    To change the batch level, proceed as follows:
          1. Choose the level at which you want your batches to be unique.
          2. Save the new settings and choose Back.
          3. Select function Batch level -> Conversion.
          4. If necessary, carry out the conversion in test mode first.
    Further notes
    Note that you cannot reset conversion from plant level to a higher level in the standard.
    If you create a client by copying an existing client, initially, there are no settings in the target client at batch level. The system makes the settings in the target client only when you have carried out an activity (maintaining master data or posting a goods movement, for example).
    SETTINGS BEFORE/AFTER CLIENT COPY:
    Source client Target client
    Client level Material level
    Material level Material level
    Plant level Plant level
    Batch status management
    Batch status management is an additional function provided by the standard R/3 System.
    Standard settings
    Batch status management is not active in the standard R/3 system.
    Activities
    To activate batch status management, proceed as follows:
          1. Choose Batch status management active.
          2. Save the new setting and choose Back.
          3. Choose Batch status management -> conversion.
          4. If necessary, carry out the conversion in test mode first.
    Further notes
    Batch status management is linked to the batch level. At material and at plant level, the status management settings are valid within the client, that is for all plants. However, if you have defined batches to be unique at plant level, you have to select the plants in which status management is to be active using function Plants with status management.
    If you activate status management, all existing batches are assigned status 'unrestricted'. If you deactivate status management, the systems transfers all restricted batches to unrestricted stock within conversion. Restricted stock only exists if status management is active.
    If you create a client by copying an existing client, status management is automatically activated if batches exist in the target client, independent of the settings in the source client. If no batches exist in the target client, it is not activated. In this case, you have to activate or deactivate status management manually, if required.
    Plants with batch status management
    Activities
    To select the plants in which status management is to be active, proceed as follows:
          1. Set characteristic Batch status management for those plants in which batch status management is to be active.
          2. Save your settings and choose function Back.
          3. Choose function Batch status management -> conversion
          4. If necessary, carry out the conversion in test mode first.
    Initial status of a new batch
    Using this function, you can specify for each material type which initial status new batches are to be assigned. However, if you use a quality management system, this specifies the status of the batches.
    Hope it will help
    Best Regards

  • Best practice video conversion from download

    I am looking for best practice for video conversions.
    I am downloading adobe recordings via this method:
    http://server.adobeconnect.com/xyz/output/filename.zip?download=zip
    From here, I have been converting the FLVs using either freemake video converter or FLV converter. I have tried converting into AVI (XVID), MOV, WMV, etc. (I need the file to be under 600 MB for an hour of recording, therefore it is going to need some type of compression).
    My goal is to import the video into Sony Vegas Pro 10 for further editting. I have found that whatever method I use, the video and audio does not sync properly about 50% of the time. The video time is longer than the audio time usually. Or that there are other various errors, such as the video just freezing halfway through the video.
    I have been using connect for a few years now, but with each update I find (connect 8, 9, etc), that the problems are getting worse. At this point I am just wasting time trying to convert into various formats using various codecs just trying to luck upon one where the video is at least without error.
    What methods are others using to convert the FLV to a workable editable format?

    Can't the FLV files be changed into many different formats through Apple's
    Compressor or Adobe Media Encoder? These formats can then be opened in
    standard video editing software for editing.
    Best practice video conversion from download
    mach5kel
    to:
    jsb152
    05/21/12 01:03 PM
    Please respond to jive-509399086-9dnu-2-2mvb7
    Re: Best practice video conversion from download
    created by mach5kel in Connect General Discussion - View the full
    discussion
    Yes, I use this as a last resort, as the quality of capture this was is
    signifcatnly lower. As well as it is a much more time consuming process. I
    sometimes have over 50 parts of 1 hour video. To use camtasia, you need
    first to record it, then it must be saved in a camtasia format, and then
    lastly rendered into avi or wmv. Therefore, it is does take awhile.
    Really, I feel there shouldnt be so many errors in the conversion process,
    but I am finding the FLV recordings themselves have problems. This last
    file I am looking at, even the recording playback on adobe connect, has
    serious issues with audio and video sync. A problem that is all too common
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/4426243#4426243]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/4426243#4426243]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Connect General Discussion by email or at Adobe
    Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • Best conversion for the web site

    Hi Folks
    I made a Video with my HD camera and made a nice movie in iMovie HD 6 in 1080i-30. what is the best conversion to view it on my web site. I have tried a few of the settings but none thrill me. all either too small or too square. What are the best settings for wide screen conversion for the web?
    Thanks
    Don

    hey everyone
    just wanted to say thanks, I have been working on my 1st iMovie project and had a few questions and everyone here was great
    I finished my 1st iMovie project yesterday and posted it to the web site today
    http://www.pspartyband.com/Live%20Video%20Clips.html
    I just bought the Cannon HV20 camera on Monday 5/7/07 and shot this Video on Tuesday night 5/8/07. I have never owned a Video camera before and true to the advertisement the canon was just point and shoot and I got pretty decent Video. We passed the camera around to everyone in the band so that everyone could shoot a little and everyone could be in the video. next time I think i'll bring a friend to shoot so we can just play.
    I had no problem at all importing the video from the HV20 into iMovie as some here have been experiencing. I thought iMovie was very easy to use and since I am used to working in Logic Pro I know to hit save every couple of edits, just in case of a crash, which it did a couple of times
    anyway thanks again and let me know what you think of my video
    Don

  • FM for Material number conversion from R/3 to APO in R/3

    Hi,
       Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
    Please suggest to win full points.
    Thaniks in Advance,
    Chandan Dubey

    Dear Chandan,
    Conversion Exits:
    CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
    Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
    For example:
    data : v_matnr type matnr,            "R/3 Material
           v_apo_matnr(40) type c,        "APO Material with 40 length
           v_zeros(22) type c. value '0000000000000000000000000000'.
    CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
           EXPORTING  INPUT          = v_matnr
           IMPORTING  OUTPUT         = v_matnr.
    concatenate e_mantr v_zeros into
                v_apo_matnr.
    Regards,
    Naveen.

  • I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

    What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • What would be the best Memory to purchase for my iMac 7.1 I want to upgrade from Leopard to Snow Leopard or Lion

    What would be the best Memory to purchase for my iMac 7.1. I want to upgrade from OS Leopard to Snow Leopard or Lion?

    Crucial.com and macsales.com (OWC) sell RAM tested to work with Macs.  Prices are good and the sites will guide you to the maximum you can install (even if the "official number" from Apple release at time of system design is different).

  • Imessage sends messages from email despite selecting phone number for "start new conversations from"

    On both my phone and my computer I have selected to start new conversations from my phone number, but just now I continued a conversation from my macbook and it sent it from my email address instead of my phone number! All the other answers I found for this question were outdated, I couldn't find "Caller ID" in settings for iOS 8 or Yosemite.

    If this is a continuing conversation, I don't believe the device looks at it as a new conversation, which is what that setting is for, from what I understand. If there is a checkmark by the phone number on all devices, then it should start there, but if the conversation was originally started from the email, I believe it will continue until you start a new conversation.

  • What is the best anti-theft hardware for iPhone 4? From pick pocket thief.

    What is the best anti-theft device for iPhone 4s? Going to Barcelona, Spain in a week; pick pocket capital city of the world.

    I guess LoJack is probably the DeFacto when it comes to this however I haven't used it myself...
    http://www.absolute.com/en/lojackforlaptops/home.aspx

  • Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

    Hi,
    I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
    When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<.  Once they open the chat window, they can see my typed text.  Occasionally, certain people can't see the first line of my chat, but as
    long as they keep the chat window open, they can see everything new I type.
    All my conversations that are saved in outlook show ÿþ< for the text and are unreadable.  I've disabled the saving of conversations because they have become worthless.
    I believe it has to do with BOM but have not been able to find a way to fix this.
    If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
    (I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
    I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
    (I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
    I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
    Any help and or suggestions would be appreciated.

    Hi,
    Did the issue happen only for you or for multiple users?
    Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
    The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
    The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
    Then test the issue again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Best RAW Image Processing for Canon Digital Rebel XT - PS Elements 6??

    I'm new to RAW image processing and image editing. I just bought a Canon digital Rebel XT. It comes with Canon Digital Professional 2.1 software. I also have Aperture upgraded to 1.5.6, which I have tried on JPEGs from an earlier digital camera that only gave me JPEG files. Since Aperture doesn't give me as much editing diversity, I purchased the newly released Photoshop Elements 6 (and I don't have any experience with Photoshop). Thus, I now have 3 different RAW image processors. Does anyone have some experience with these 3 to suggest which one is best? The learning curve looks pretty steep, and it would be helpful to know which of these to focus on, at least initially.
    Thanks in advance for the help!

    Disgruntled3x wrote:
    I'm new to RAW image processing and image editing. I just bought a Canon digital Rebel XT. It comes with Canon Digital Professional 2.1 software. I also have Aperture upgraded to 1.5.6, which I have tried on JPEGs from an earlier digital camera that only gave me JPEG files. Since Aperture doesn't give me as much editing diversity, I purchased the newly released Photoshop Elements 6 (and I don't have any experience with Photoshop). Thus, I now have 3 different RAW image processors. Does anyone have some experience with these 3 to suggest which one is best? The learning curve looks pretty steep, and it would be helpful to know which of these to focus on, at least initially.
    Thanks in advance for the help!
    Now that you have the Canon DPP installed i would update it to version 3.2 which is at Canons site.
    Now, DPP has the best conversion quality for Canon RAW files. I used it a lot and although limited in what adjustments you have, it offers the essential adjustments and I liked it a lot.
    Aperture also does a great job with Canon RAW files, but version 2.1 is even better
    Photoshop Elements 6 I have not used but I do use Photoshop CS3
    Personally for RAW I prefer Canon DPP over Adobe Camera Raw
    And I prefer Aperture over Adobe Camera RAW too.
    Now that Aperture has improved it's RAW conversion immensely and it offers tethered shooting with the XT, I am using Aperture exclusively to process RAW files.
    An application like Elements or Photoshop CS3 are great if you want to do more advanced layered work and layer blending effects, however, for sepia , black/white, general image color & saturation or desaturated effects and good RAW conversion? I am all about using Aperture.
    Now although I use it on a MBP, I will only do edit and color judging when attached to a cinema display or any good LCD with a DVI connection to the laptop.
    But in conclusion, for RAW adjustments may as well focus on Aperture and use Elements for the few edits that Aperture does not allow.

  • Quantity conversion check failed for one item; all qty lines deleted

    Hi IS Oil Experts,
    Iam using the BAPI "BAPI_GOODSMVT_CREATE_OIL" for posting goods movement. I filled the additional quantities and unit of measures also in the BAPI table, But when tried to execute, Iam getting the error, "Quantity conversion check failed for one item; all qty lines deleted"
    Please anybody tell me what is the error from end for resulting this message.
    Thanks in advance
    Prathib

    Dear you!
    I also get the issue that you meet. Can you help me to process it, Please/
    Best regards, Huy.

Maybe you are looking for