Best D.A.L options to report Webi (/BW?) on top of ECC

Hello,
Sorry if my question looks simplistic but i'm quite new to SAP with BO.
Here is the situation: We have implemented ECC and we want to create WebI reports out of the information in ECC.
I'm looking for the best option (with ideally pros & cons), with a focus on the best Data Access Layer.
- (option1) Someone has proposed (and prototyped) WebI/Universes with a direct connection to ECC tables. Problem is they didn't know the underlying model and information may not be accurate. Also, it doesn't feel right to me because of the afored point but also because of performance (need to retrieve data through lots of tables and joins) or security issues (not leveraging ECC security). Whenever we'll change ECC, i fear that this will be directly impacted.
> are my assumptions/fears correct
> what are the better way to directly connect to ECC (assuming this is SAP drivers)
> would this option be more relevant if we use SAP rapid mart (using the data services BOBJ ETL tool)
- (option 2) another option would be to setup BW on top of ECC, then creating WebI reports on top of BW.
> if this option more relevant than the one above
> I'm also wondering if the best option is an OLAP universe (with direct access on infocube), or is it better to create a relational universe (using a tool i don't remember the name)
> is it better to create a custom datamart on top of ECC (but we have a few specific in ECC and it looks like we reinvent BW)
> i'm not familiar with BW accelerator but it looks like it may help.
Thanks a lot for your help.
jc

Hi,
The best option is to follow SAP BOBJ best practices.
BW on the top of ECC.
Queries on the Top of InfoProviders
Universes on the top of Queries
BO on the top of Universes.
Universe can also be created on the top of InfoProvider but it is not a good practice.
If we connect BOBJ directly to ECC it is possible but I won't suggest for we loose so many things.
Regards,
Bashir Awan

Similar Messages

Best approach to "migrate" from BEX reports to Webi reports ?

Hello,
i have read lots of documents regarding best practices on how to built webi reports and universes on top of BW.
But i can't find any document about best approach, not in performance way of thinking but in best way of using reports.
i mean: when end users are coming from bex reports (where they can drill down through hierarhies and use free filters ) to webi reports (where layout is quite beatiful and user can change it easely), this is not the same way of consuming reports.
I come from BO world and are new on reporting on top of BW.
for me webi is good for quite static layout reporting where data is clear and available.of course you can have prompts for interactivy and more accurate reporting. Drill down is just a functionality but is not the real purpose of the report tool.
So ,according to me there is a gap between both tools (BEX and WEBI) but end users are the same.
So i 'm wondering if you have any feedback for the best approach to build webi reports where end users are coming from bex reporting.
And how to choose between prompts, drill-down (with available filters on top of the window), fold/unfold and input controls or just having diffrent levels of hierarchies in the table/ section/ breaks but without drill down (because if you drill down, report begins weird with diffrent levels) ...?
So , if you have any feedback , advise....
thanks in advance,
Rgds,

Hi,
WEBI don't replace BEX reports, is for different audience, in fact BEX is for OLAP reports and analysis.
You can find some answer in this page
[FAQ: The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI & Business Objects Roadmap|FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]|FAQ]
spercific for What is the future of the BEx Query Designer? you can read here
[FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section11] and here [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section3]
The idea is to use the rigth tool for the rigth job.
You can find more information here [http://www.sdn.sap.com/irj/sdn/edw], [http://www.sap.com/solutions/sapbusinessobjects/index.epx], [http://www.sap.com/solutions/sapbusinessobjects/newsevents/index.epx], [http://www.sap.com/community/flash/BusinessIntelligenceAGuideforMidsizeCompanies.pdf]
I hope this help you.
Best regards.

"Block EDIT option*" for all WEBI Reports with Administrator Account

Hi,
I had opening CMC with Administrator Account.Due to some reasons i want to "Block EDIT option" for all WEBI Reports.Just Viewing is sufficient.In the same way for Universe"Blocking EDIT object option".Instead of Administrator guide reference (chap no 18 &19)option.Could you help in steps resolving issue.Thanks in advance.
Regards,
Swapna.

Hi Swapna,
You could perform the following steps:
1. Login to CMC.
2. Go to Folders >> Manage >> Top Level Security
3. Click on Add Principal and add the user or group for which you have to set the security.
4. Click on assign Security >> Advanced tab >> Add/Remove Rights.
5. Select Content >> Web Intelligence Report
6. assignt "Edit Object" right as denied and click on apply ok.
This would help you to block edit option for only webi reports and all the webi reports in your environment.
Regards,
Nakul

12002 The Reporting Web Service is not working.

Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
Nenad

Hi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Process for adding a boolean option to the web service API

Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]

Hey Josh, I'm swamped at the moment but appreciate your interest and your contributions to Flex and WebServices thus far. I'll try and get some time to look into your specific request and what you're hoping to do at the code level, but to answer your question about test cases, you should consider the NIST testsuite for XML Schema datatypes. BlazeDS has historically maintained the WebService implementation, so it appears their test case for NIST based schema tests starts out here (and refers to many data type test cases in the /nist subdirectory). http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes t.as Pete ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Josh McDonald Sent: Tuesday, July 08, 2008 8:21 PM To: [email protected] Subject: Re: Process for adding a boolean option to the web service API A new message was posted by Josh McDonald in Developers -- Process for adding a boolean option to the web service API Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as it's [ExcludeClass] anyway so end users don't see it, nor is it documented in the api docs. Just wasn't sure where it should be. I'll have a think about it some more when I get some down time to work on it, but webservice was where I was thinking it should be too. Didn't think about having it settable on operation as well though, so thanks for that :) Anybody know a good source of valid values for various XSI types (date and DateTime mainly) for testing purposes? Or even who I should contact to get access to that sort of thing? I assume the W3C will take 6 months to answer me, and the answer will be "buy our $10,000 compliance testing suite" or something along those lines. -Josh On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]> wrote: A new message was posted by Matt Chotin in Developers -- Process for adding a boolean option to the web service API I think for a top-level user option I would put the new option on the mx.rpc.soap.Operation class (I think that's the name). You'd then have that propagate through to the underlying schema classes as they are used. I'd then also add an option to the WebService class itself, and basically in the Operation it should see if it has its own value set and if not check the value on the WebService. We do this for a couple of other flags too I think. End users in general wouldn't look at any classes other than the WebService and maybe the Operation classes, so asking them to set options on the schema classes themselves probably wouldn't work. Matt -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." :: Josh 'G-Funk' McDonald :: 0437 221 380 :: [email protected] ________________________________ View/reply at Process for adding a boolean option to the web service API <a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form to cancel your email subscription.

Interactive Reporting Web Client on Apple Mac: Intelligence iServer?

Hi All,
I just installed EPM release 11.1.1.1 along with Interactive Reporting. We were led to believe that Macintosh was supported as long as FireFox was used as a browser. Everything seems to work fine except when I try to create a new Interactive Reporting Web Client document, I get the error message:
Viewing and analysis with Interactive Reporting Web Client is supported in Windows only.
For other platforms, use the Intelligence iServer option: ihtml servlet icon
Contact your system administrator if this option is not available.
I cannot seem to find much information on this "Intelligence iServer". Does this exist and will it let FireFox clients use Interactive Reporting Web Client? Is it an option that can be installed on the server?
Thanks for
any insight.
Randy

Hi,
I have some knowledge about this Intelligence iServer, which I would like to share with you.
In Version 8(HPSu 8.5), Hyperion has 5 servers, which we need to install-
Hyperion Foundation server
Hyperion SQR server
Hyperion SQR iserver
Hyperion Intelligence Server
Hyperion Intelligence iserver
Each server had its own specific work and foundation server was base of all other servers.
Hyperion Intelligence iserver supports the user to access the BQY in ihtml client. It helps user to perform some feature (like drill down-drill up) in html view.
Later Hyperion Came with System 9 and integrated the entire server into a single bundle (internally I don't know what happened).
This EPM 111.1.1 is Hyperion System 9.5 only.
I would like to advice you to log this case to Oracle support (metalink3) and ask more information about this.
It may be that, EPM 11 doesn't support Web Client in Macintosh environment
Thanks & Regards,
Mohit Jain

Hyperion Interactive Reporting Web Client Installation in Linux.

Hi everybody,
Is there any official documentation of how to install Hyperion Interactive Reporting WEB Client in Linux environments ?
I checked Oracle Documentation and I found information about the HIR Desktop Client. But not about the web client.
Note: I need official documentation because of a discussion with security admins.
Any Help ?
Regards,
Gustavo.

The information required to automate (silent) the Insight/Plugin Installation is as follows:
Before going for the Silent Installation of 11.1.1.3 IR Web Client, we need create a Response File and moved the response file to Installer location to automate the Install.
Please follow the below procedure to accomplish the same:
1. Record a response file use the command "setup /ieinstall -r" (or "setup /ff install -r" if you use Firefox).
2. The above command will then create a setup.iss file in the <C:\Windows> directory.
3. Then move that <C:\Windows\Setup.iss> file to the Insight folder, so to resides with the setup.exe.
4. Then to launch the silent installation, use the command "setup /ieinstall -s" and it will use the options you choose when creating the response file.
5. You can create a batch file with the command line script as mentioned in Step 4 and keep in the same folder. So that the end user can use the same to automate the install.

Newbie: What is the best approach to integrate BO Enterprise into web app

Hi
1. I am very new to Business Objects and .Net. I need to know what's the best approach
when intergrating bo into my web app i.e which sdk do i use?
For now i want to provide very basic viewing functionality for the following reports :
-> Crystal Reports
-> Web Intellegence Reports
-> PDF Reports
2. Where do i find a standalone install for the Business Objects Enteprise XI .Net providers?
I only managed to find the wssdk but i can't find the others. Business Objects Enteprise XI
does not want to install on my machine (development) - installed fine on server, so i was hoping i could find a standalone install.

To answer question one, you can use the Enterprise .NET SDK for each, though for viewing Webi documents it is much easier to use the opendocument method of URL reporting to view them.
The Crystal Reports and PDF instances can be viewed easily using the SDK.
Here is a link to the Developer Library:
[http://devlibrary.businessobjects.com/]
VB.NET XI Samples:
[http://support.businessobjects.com/communityCS/FilesAndUpdates/bexi_vbnet_samples.zip.asp]
C# XI Samples:
[http://support.businessobjects.com/communityCS/FilesAndUpdates/bexi_csharp_samples.zip.asp]
Other samples:
[https://boc.sdn.sap.com/codesamples]
I answered the provider question on your other thread.
Good luck!
Jason

Definition of the best approach on how to do reporting between BPC and BW

Hi,
I need your opinion in the definition of the best approach on how to do reporting between BPC and BW.
For example if we want to do reporting using BW on Actuals Vs Budget how should we manage this since technically BPC Model and BW InfoCube is different?
BPC Models have the Budget and BW has the actuals, but the InfoObject that is used for Account is different. What is the best approach to do the reporting?
Thanks in advance,
JA

Hi Gersh
I already thought in that option, but the problem is the Yellow requests in the Infocube that are not used by VP.
In the past I used Report RSAPO_CLOSE_TRANS_REQUEST_ALL3 in the virtual function module to close the requests, but now I didn't want to use VP based on function module.
Is there any option to use data in Yellow requests in VP based on DTP?
Best regards,
JA

I want to block reported web forgeries, but cannot find the preferences button.

I have Windows XP and Firefox 7.0.1. I am trying to "block reported web forgeries." The instructions I read said I could get to this choice via "Firefox"," preferences", and "security." Within "security" I would have the desired choice.
I have apparently done something wrong. I do not find a "Firefox tab", much less a "preferences" choice. Please be kind; I am not very knowledgeable. I cannot figure out how to copy and paste in this setting. This is the fourth time I have tried to write this question. Several months ago, when I asked a question, I used the wrong terminology and got a sarcastic answer. I need help, not judgement.

I followed your instructions, and they worked great! Once the Firefox button was available, there were other choices I had been wondering about. I will try them out (copy, paste using clipboard) when I have time. Thank you for the suggestion.
I also converted back to the original menu format by going to the "options" choice after clicking on the Firefox button. Within the options you check "menu bar" and the menu bar appears complete with a "tools" choice. This procedure may only work with Windows XP, but if you want a "tools" choice and a menu bar this procedure might be worth a try. The "tools" menu has nearly all the choices available when the "Firefox" button is visible, and very few, if any new options. The key to switching formats is in choosing the "options" button where ever it appears in either format. All of these choices are in the upper-left corner of the screen.

Financial Reporting Web service Out of Memory (11.1.2.2.300)

Financial Reporting web services runs out of memory. The JVM settings are currently set to 2048. The OS is windows 2008 64 bit.
We have made the the following settings but it still does not help. The service would stay up for about 5 to 6 hours and then would go out of memory. We also see that there is a continuous activity in Financial reporting logs even when there are no users using the system.
- Navigate to the following Windows Registry key on the server hosting the Financial Reporting web application component:
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\FinancialReporting0\HyS9FRReports
- Export the above mentioned Windows Registry key for backup purposes,
- Create a new "String Value" entry with following name and value:
Name:JVMOptionY
Value:-XXtlasize:min=4k,preferred=64k
With Y being equal to (current value of JVMOptionCount) + 1
- Create a new "String Value" entry with following name and value:
Name:JVMOptionZ
Value:-XXlargeObjectLimit:4k
With Z being equal to (current value of JVMOptionCount) + 2
- Increase the value of the JVMOptionCount parameter by 2
- Restart the Financial Reporting web application component for the changes to be taken into account.
[2013-06-10T05:33:38.950-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(549)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13182 ms.
[2013-06-10T05:34:18.404-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(550)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 26365 ms.
[2013-06-10T05:34:45.424-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(551)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25340] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13760 ms.
[2013-06-10T05:59:50.634-04:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: Thread-67] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25338] [SRC_CLASS: com.hyperion.reporting.connection.CleanConMgrThread] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: run] [[
java.lang.OutOfMemoryError

Financial Reporting web services runs out of memory. The JVM settings are currently set to 2048. The OS is windows 2008 64 bit.
We have made the the following settings but it still does not help. The service would stay up for about 5 to 6 hours and then would go out of memory. We also see that there is a continuous activity in Financial reporting logs even when there are no users using the system.
- Navigate to the following Windows Registry key on the server hosting the Financial Reporting web application component:
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\FinancialReporting0\HyS9FRReports
- Export the above mentioned Windows Registry key for backup purposes,
- Create a new "String Value" entry with following name and value:
Name:JVMOptionY
Value:-XXtlasize:min=4k,preferred=64k
With Y being equal to (current value of JVMOptionCount) + 1
- Create a new "String Value" entry with following name and value:
Name:JVMOptionZ
Value:-XXlargeObjectLimit:4k
With Z being equal to (current value of JVMOptionCount) + 2
- Increase the value of the JVMOptionCount parameter by 2
- Restart the Financial Reporting web application component for the changes to be taken into account.
[2013-06-10T05:33:38.950-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(549)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13182 ms.
[2013-06-10T05:34:18.404-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(550)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25339] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 26365 ms.
[2013-06-10T05:34:45.424-04:00] [FinancialReporting0] [NOTIFICATION] [00088] [oracle.EPMFR.core] [tid: RMI TCP Connection(551)-] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25340] [SRC_CLASS: com.hyperion.reporting.security.impl.HsSecurityHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: authenticateUser] External authentication successful for user: [Server0 on host ] succeeded in 13760 ms.
[2013-06-10T05:59:50.634-04:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: Thread-67] [userId: <anonymous>] [ecid: 0000JwfYJ1xDOdk5wzXBiW1HhI4I000000,1:25338] [SRC_CLASS: com.hyperion.reporting.connection.CleanConMgrThread] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: run] [[
java.lang.OutOfMemoryError

I downloaded a song from i-tunes. It plays on my computer, but won't play on my i-phone. Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time. I could not find an option to "report a problem".

I downloaded a song from i-tunes. It plays on my computer, but won't play on my i-phone. Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time. I could not find an option to "report a problem".

I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Background Processing Option in Report

Hi Fellow Abapers,
I need to edit a report whereby there is an option to display further fields. Now if they select this option, the report NEEDS to run in the background and output to the file. This will later be retrieved byt the SAP Output Controller (Which there is already a program). It is a must.
Does anybody have any links, codes, tips? Helpful posters will be awarded.

Hi You can do that programatically, no need to say execute it in background from se38. Make sure you are not using file download but use open dataset. here is the sample program. Just copy and paste this in test program and check it. hope this will be helpfull. this report reads only materials for plant and there is an option on the selection screen to print or email or you can write it to spool. ofcourse it does automatically and then you can retrieve or print from SP01 but in your case you have to write to application server.
REPORT ysam_test5 MESSAGE-ID zsummit.
DATA: marc TYPE marc.
TYPES: BEGIN OF t_marc,
 matnr TYPE matnr,
 werks TYPE werks_d,
 mmsta TYPE mmsta,
 maabc TYPE maabc,
 END OF t_marc.
DATA: it_marc TYPE TABLE OF t_marc,
 wa_marc TYPE t_marc.
DATA : gr_table TYPE REF TO cl_salv_table.
DATA : gr_functions TYPE REF TO cl_salv_functions_list.
*fields used for variant create
DATA: wa_var_desc TYPE varid,
 it_var_contents TYPE TABLE OF rsparams,
 it_var_text TYPE TABLE OF varit,
 wa_var_text TYPE varit,
 w_var_varname TYPE variant.
*printer information
DATA: wa_print_options TYPE fpm_parcon,
 wa_arc_options TYPE fpm_parcon,
 w_print_options TYPE pri_params.
*email information
INCLUDE <cntn01>.
DATA: w_recipient TYPE swc_object,
 w_recipient_obj TYPE swotobjid.
*container macro
swc_container w_swc_container.
*batch job information
INCLUDE lbtchdef.
DATA: w_job TYPE tbtcjob.
*constants
CONSTANTS: c_on VALUE 'X',
 c_off VALUE space,
 c_int(11) VALUE ' 0123456789'.
SELECTION-SCREEN BEGIN OF BLOCK main with frame.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
 s_werks FOR marc-werks.
SELECTION-SCREEN BEGIN OF BLOCK back WITH FRAME TITLE text-ss2.
PARAMETERS: p_fore RADIOBUTTON GROUP proc DEFAULT 'X', "foreground
 p_ball radiobutton group proc,
 p_berr radiobutton group proc.
SELECTION-SCREEN END OF BLOCK back.
SELECTION-SCREEN BEGIN OF BLOCK mail WITH FRAME TITLE text-ss3.
PARAMETERS: p_print RADIOBUTTON GROUP mail DEFAULT 'X',
 p_email RADIOBUTTON GROUP mail.
SELECTION-SCREEN END OF BLOCK mail.
SELECTION-SCREEN END OF BLOCK main.
START-OF-SELECTION.
IF sy-batch = c_off AND p_fore = c_off.
 PERFORM create_variant.
 PERFORM build_print_parameters.
 IF p_email = c_on.
 PERFORM build_email_container.
 ENDIF.
 PERFORM open_job.
 PERFORM submit_job.
 PERFORM close_job.
 MESSAGE i000 WITH 'Job' w_job-jobname
 'has been submitted'.
 perform delete_variant.
 EXIT.
ENDIF.
perform select_data.
END-OF-SELECTION.
PERFORM salv_grid.
*& Form salv_grid
 text
FORM salv_grid .
DATA: lref TYPE REF TO cx_root .
DATA: lr_layout TYPE REF TO cl_salv_layout,
 ls_key TYPE salv_s_layout_key.
TRY.
 cl_salv_table=>factory(
 IMPORTING
 r_salv_table = gr_table
 CHANGING
 t_table = it_marc ).
 CATCH cx_salv_msg INTO lref.
ENDTRY.
***Sub Total
PERFORM sub_total.
***Layout
lr_layout = gr_table->get_layout( ).
ls_key-report = sy-cprog.
lr_layout->set_key( ls_key ).
lr_layout->set_default( 'X' ).
lr_layout->set_save_restriction( if_salv_c_layout=>restrict_none ).
***toolbar
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( 'X' ).
*final display
gr_table->display( ).
ENDFORM. " salv
*& Form sub_total
FORM sub_total .
DATA: lr_aggregations TYPE REF TO cl_salv_aggregations.
lr_aggregations = gr_table->get_aggregations( ).
lr_aggregations->clear( ).
TRY.
 lr_aggregations->add_aggregation( columnname = 'Z_BALANCE_REM' ).
 CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
TRY.
 lr_aggregations->add_aggregation( columnname = 'Z_PAY_AMT' ).
 CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
ENDFORM. " sub_total
*& Form select_data
form select_data .
select matnr werks mmsta maabc into table it_marc
 from marc
 where matnr in s_matnr
 and werks in s_werks.
endform. " select_data
*& Form create_variant
form create_variant .
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
 EXPORTING
 curr_report = sy-cprog
 TABLES
 selection_table = it_var_contents
 EXCEPTIONS
 not_found = 1
 no_report = 2
 OTHERS = 3
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE sy-datum sy-timlo INTO w_var_varname.
wa_var_desc-mandt = sy-mandt.
wa_var_desc-report = sy-cprog.
wa_var_desc-variant = w_var_varname.
wa_var_desc-transport = 'F'.
wa_var_desc-environmnt = 'A'.
wa_var_desc-version = '1'.
wa_var_text-mandt = sy-mandt.
wa_var_text-langu = sy-langu.
wa_var_text-report = sy-cprog.
wa_var_text-variant = w_var_varname.
CONCATENATE 'Batch Job Variant -' sy-uname INTO wa_var_text-vtext.
APPEND wa_var_text TO it_var_text.
CALL FUNCTION 'RS_CREATE_VARIANT'
 EXPORTING
 curr_report = sy-cprog
 curr_variant = w_var_varname
 vari_desc = wa_var_desc
 TABLES
 vari_contents = it_var_contents
 vari_text = it_var_text
 EXCEPTIONS
 illegal_report_or_variant = 1
 illegal_variantname = 2
 not_authorized = 3
 not_executed = 4
 report_not_existent = 5
 report_not_supplied = 6
 variant_exists = 7
 variant_locked = 8
 OTHERS = 9
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " create_variant
*& Form build_print_parameters
form build_print_parameters .
IF p_print = c_on.
 CALL FUNCTION 'MAINTAIN_PRINT_PARAMETERS'
 EXPORTING
 i_title_text = 'Select your printer'
 CHANGING
 c_pri_params = wa_print_options
 c_arc_params = wa_arc_options
 EXCEPTIONS
 parameters_not_valid = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE e000 WITH 'Print parameters could not be gathered'.
 ENDIF.
ENDIF.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'CHECK_PRINT_PARAMETERS'
 EXPORTING
 i_title_text = 'Select your printer'
 i_pri_params = wa_print_options
 i_arc_params = wa_arc_options
 IMPORTING
 e_pri_params = w_print_options
 EXCEPTIONS
 parameters_not_valid = 1
 OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF sy-subrc <> 0.
 MESSAGE e000 WITH 'Print parameters could not be assigned'.
ENDIF.
IF p_print = c_on.
 w_print_options-primm = c_on.
ELSE.
 w_print_options-primm = c_off.
ENDIF.
endform. " build_print_parameters
*& Form build_email_container
form build_email_container .
swc_create_object w_recipient 'RECIPIENT' space.
swc_clear_container w_swc_container.
swc_set_element w_swc_container 'AddressString' sy-uname.
IF sy-subrc NE 0.
 MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
swc_set_element w_swc_container 'TypeId' 'B'.
IF sy-subrc NE 0.
 MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
swc_call_method w_recipient 'CreateAddress' w_swc_container.
IF sy-subrc <> 0.
 MESSAGE e000 WITH 'Could not determine email address'.
ENDIF.
swc_set_element w_swc_container 'SendExpress' 'X'.
IF sy-subrc NE 0.
 MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
swc_call_method w_recipient 'SetExpress' w_swc_container.
swc_call_method w_recipient 'Save' w_swc_container.
swc_object_to_persistent w_recipient w_recipient_obj.
endform. " build_email_container
*& Form open_job
form open_job .
CONCATENATE sy-cprog '-' sy-uname INTO w_job-jobname.
CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = w_job-jobname
 jobclass = 'A'
 IMPORTING
 jobcount = w_job-jobcount
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " open_job
*& Form submit_job
form submit_job .
CALL FUNCTION 'JOB_SUBMIT'
 EXPORTING
 authcknam = sy-uname
 jobcount = w_job-jobcount
 jobname = w_job-jobname
 priparams = w_print_options
 report = 'YSAM_TEST5'
 variant = w_var_varname
 EXCEPTIONS
 bad_priparams = 1
 bad_xpgflags = 2
 invalid_jobdata = 3
 jobname_missing = 4
 job_notex = 5
 job_submit_failed = 6
 lock_failed = 7
 program_missing = 8
 prog_abap_and_extpg_set = 9
 OTHERS = 10.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " submit_job
*& Form close_job
form close_job .
CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = w_job-jobcount
 jobname = w_job-jobname
 strtimmed = c_on
 recipient_obj = w_recipient_obj
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 invalid_target = 8
 OTHERS = 9.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " close_job
*& Form delete_variant
form delete_variant .
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
 report = sy-cprog
 variant = w_var_varname
 FLAG_CONFIRMSCREEN = 'X'
 FLAG_DELALLCLIENT = 'X'
IMPORTING
VARIANT =
EXCEPTIONS
 NOT_AUTHORIZED = 1
 NOT_EXECUTED = 2
 NO_REPORT = 3
 REPORT_NOT_EXISTENT = 4
 REPORT_NOT_SUPPLIED = 5
 VARIANT_LOCKED = 6
 VARIANT_NOT_EXISTENT = 7
 NO_CORR_INSERT = 8
 VARIANT_PROTECTED = 9
 OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " delete_variant

How to diable the default option of report-based total (when applicable)

Hi,
Anybody know how to diable the default option of report-based total (when applicable)?
By default this aggregation rule option is checked.
There should be some configuration tag in instanceconfig.xml or somewhere else, such as <ReportAggregateEnabled>true</ReportAggregateEnabled>?
Regards,
Tina

you can change this from admin tool,
open admin tool,
business model and mapping
find your column in the model
double click your column, click on aggregation, >> default rule >> none.
but if you do this, you cant make any sum operation.

Microsoft Reporting Web Service

I am trying to call the new Microsoft Reporting web service from
weblogic 8.1sp2. I've run the clientgen utility against the microsoft
reporting server's wsdl.
Using the generated stup classes, I keep getting an error about a
snapshotID parameter, which is not a parameter passed in the stub API.
I've attached the wsdl, java program and the soap xml with the error in
it.
Any help would be greatly appreciated.
Thanks,
Eddie
[ReportingService.wsdl]
import java.io.*;
import weblogic.webservice.context.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.holders.*;
public class TestClient1
public static void main(String args[])
FileOutputStream out_stream= null;
PrintWriter writer = null;
try
//out_stream =
// new FileOutputStream("C:/mystuff/JavaProjects8.1/java/Test/webservices/MSReportService/StackDump");
//writer = new PrintWriter(out_stream);
ReportingService_Impl rpt_srv_impl =
new ReportingService_Impl();
ReportingServiceSoap rpt_srv =
//rpt_srv_impl.getReportingServiceSoap();
rpt_srv_impl.getReportingServiceSoap("user", "password");
String reportPath = "/Chapter04/Invoice-Batch Number Report";
//String reportPath = "/Chapter04/Customer-Invoice Report";
//The rendering format for the report.
String format = "HTML4.0";
// The devInfo string tells the report viewer how to display with the report.
String devInfo =
"<DeviceInfo>" +
"<Toolbar>False</Toolbar>" +
"<Parameters>False</Parameters>" +
"<DocMap>True</DocMap>" +
"<Zoom>100</Zoom>" +
"</DeviceInfo>";
// Create an array of the values for the report parameters
ParameterValue parameters[] = new ParameterValue[2];
ParameterValue paramValue = new ParameterValue();
paramValue.setName("StartDate");
paramValue.setValue("01/01/2001");
parameters[0] = paramValue;
paramValue = new ParameterValue();
paramValue.setName("EndDate");
paramValue.setValue("01/06/2005");
parameters[1] = paramValue;
ParameterValue paramValue = new ParameterValue();
paramValue.setName("snapshotID");
paramValue.setValue("1/7/2005 10:38:21 AM");
parameters[0] = paramValue;
// Create variables for the remainder of the parameters
String historyID = null;
DataSourceCredentials credentials[] = null;
String showHideToggle = null;
String encoding;
String mimeType;
Warning warnings[] = null;
ParameterValue reportHistoryParameters[] = null;
String streamIDs[] = null;
SessionHeader sh = new SessionHeader();
SessionHeaderHolder shh = new SessionHeaderHolder();
sh.setIsNewExecution(true);
shh.setValue(sh);
ServerInfoHeaderHolder server_info_hd_hldr = new ServerInfoHeaderHolder();
Render param = new Render(reportPath, format, historyID, devInfo, parameters,
credentials, showHideToggle); //, encoding, mimeType,
//reportHistoryParameters, warnings, streamIDs);
//ServerInfoHeader server_info_header = new ServerInfoHeaderHolder(;
RenderResponse response = rpt_srv.Render(param, shh, server_info_hd_hldr);
byte report[] = response.getResult();
System.out.println(report);
catch (Exception e)
e.printStackTrace();
//if (writer != null)
// e.printStackTrace(writer);
--------------------Configuration: MSQLReportService - j2sdk1.4.1_07 WebService - <Default>--------------------
Command : "C:\j2sdk1.4.1_07\bin\java.exe" -Dweblogic.webservice.verbose=true -classpath "C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService;C:\mystuff\JavaProjects8.1\lib\CR121728_81sp2.jar;C:\mystuff\JavaProjects8.1\lib\CR120224_81sp1.jar;C:\mystuff\JavaProjects8.1\lib\weblogic.jar;C:\mystuff\JavaProjects8.1\lib\webservices.jar;C:\mystuff\JavaProjects8.1\lib\webserviceclient+ssl.jar;C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\weblogicbuild;C:\j2sdk1.4.1_07\jre\lib\rt.jar;C:\j2sdk1.4.1_07\lib\dt.jar;C:\j2sdk1.4.1_07\lib\tools.jar;C:\j2sdk1.4.1_07\jre\lib\ext\dnsns.jar;C:\j2sdk1.4.1_07\jre\lib\ext\ldapsec.jar;C:\j2sdk1.4.1_07\jre\lib\ext\localedata.jar;C:\j2sdk1.4.1_07\jre\lib\ext\sunjce_provider.jar" TestClient1
Directory : C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService

URL : http://wteadapadr01/ReportServer/ReportService.asmx
Headers :
SOAPAction: ["http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render"]
Content-Type: [text/xml]
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><env:Header><n2:SessionHeader xmlns:n2="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n2:IsNewExecution>true</n2:IsNewExecution></n2:SessionHeader></env:Header><env:Body><n1:Render xmlns:n1="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n1:Report>/Chapter04/Invoice-Batch Number Report</n1:Report><n1:Format>HTML4.0</n1:Format><n1:HistoryID xsi:nil="true"/><n1:DeviceInfo><DeviceInfo><Toolbar>False</Toolbar><Parameters>False</Parameters><DocMap>True</DocMap><Zoom>100</Zoom></DeviceInfo></n1:DeviceInfo><n1:Parameters xsi:type="n1:ArrayOfParameterValue"><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>StartDate</n1:Name><n1:Value>01/01/2001</n1:Value></n1:ParameterValue><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>EndDate</n1:Name><n1:Value>01/06/2005</n1:Value></n1:ParameterValue></n1:Parameters><n1:Credentials xsi:nil="true"/><n1:ShowHideToggle xsi:nil="true"/></n1:Render></env:Body></env:Envelope>


URL : http://wteadapadr01/ReportServer/ReportService.asmx
Response Code :500
Headers :
Date=Thu, 13 Jan 2005 21:59:37 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
X-AspNet-Version=1.1.4322
Cache-Control=private
Content-Type=text/xml; charset=utf-8
Content-Length=2882
Envelope :
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.</faultstring>
<faultactor>http://wteadapadr01/ReportServer/ReportService.asmx</faultactor>
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message msrs:ErrorCode="rsParameterTypeMismatch" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00" xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices" />
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>

java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
Detail:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message xmlns:msrs="http://www.microsoft.com/sql/reportingservices"
msrs:ErrorCode="rsParameterTypeMismatch"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices">
</Warnings>
</detail>; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1266)
at TestClient1.main(TestClient1.java:97)
Caused by: javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:313)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:290)
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1261)
... 1 more
Process completed.

This is a little late, I know. but I just spent the day
struggling with this very issue. Hopefully this can help someone
else in the future. Here's my solution...
on MX:Operation -- result="fillXML()"
then
private function fillXML(): void {
var x:XML = new
XML(wsProps.GetDatasetData.lastResult.toString());
...do what you need with your xml...
I use an XMLList node of the result as the source property
for an XMLListCollection bound to a datagrid. Let me know if you
need more help to get it working. It works like a charm now that I
figured that out. I don't know if it's a slimy hack, or not, but it
gets the job done.

Best D.A.L options to report Webi (/BW?) on top of ECC

Similar Messages

Maybe you are looking for