Best Data rate and format for Big Screen Playback

I am a video producer supplying content for a tradeshow display consisting of 18 flat screens oriented vertically, 8 over 8. Very heavy duty Windows playback machine, with 3 graphics cards, 1 for each set of 6 monitors. The total pixel size is 3240x 1280 px. We have produced a number of full screen and smaller movies that the interactive programmer is trying to intergrate into a Flash program where some videos will play full screen, and others in smaller windows (those were produced in 1920x1080). All videos were mastered at the specified pixel count, square pixels, progressive, and output in Pro Res 422, 44.1K audio. Flash is being used to create the interface, and I am transcoding to .F4V at lower bit rates like 4, 6, and 9 Mbps. They are having trouble playing these movies back smoothly. We have done similar projects in the past with Director without issue. Of course they are blaming the video, I am offering to encode in any format at any data rate they suggest. Can anyone suggest a direction here?

Are you trying to burn a standard DVD or are you trying to put a QuickTime .mov file on DVD media?
A standard DVD doesn't worry about file size (only the duration).
A "data" DVD is limited to the type of media used. A single layer DVD is about 3.7 GB's.
In order to make a data DVD you need to keep the data rate low enough to not exceed the DVD media playback abilities. They can't handle the higher rates found in many of the preset options.
You can avoid all of these headaches by telling the viewer to "copy" the .mov file from the DVD to their Desktop. Then nearly any of the presets option will work.
H.264 is a great video codec and the "automatic" preset should work just fine. Use "multi-pass" for best quality (takes a very long time). Remove the check mark for "Audio" since your file has none. Leave it checked and you waste file size because a silent audio track would be added.

Similar Messages

Best Data Rate for Export to DVD as Quicktime Movie

Hello - hope someone out there can help me!!!
I put together a slideshow for my high school reunion using iMovie HD 5.0.2 and need help with settings exporting it as a Quicktime movie.
*I want to export it to a DVD* so that I can play it on a friend's laptop and I'm not sure if iDVD would be the way to go - my friend has a Macbook Pro I can borrow so it might be okay - I am worried about the fact that I've been working on older software. (I have read about opening iDVD and bringing in iMovie project vs. "share to iDVD"). So they suggested instead of iDVD I just export as a quicktime. Then I can burn it in Toast (v.6.0.2)
Wondering about *BEST DATA RATE?*
In export settings I have:
compressor set at H.264
frame rate: current (should that be DV-NTSC?)
key frames: automatic (?)
encoding: best quality/multi-pass
should data rate be automatic?
Some details that might be relevant to helping me:
*Stills brought in as clips with cross-dissolves, only two uses of "Ken Burns effect"
*Some stills were in the project from my LAST reunion - I realize I should have reimported all the stills since I am now recompressing them, but it's too late now!
*no audio
*Slideshow is about 45 mins long, file size says 5.52GB although when I looked into exporting it last night it said 9+GB - not sure why
*Using a G4 Tower (not my ancient laptop) with OS 10.4.11, Dual 533MHz PowerPC, 1.5GB SDRAM
iDVD version is 6.0.4
please help if you can!! thank you in advance...

Are you trying to burn a standard DVD or are you trying to put a QuickTime .mov file on DVD media?
A standard DVD doesn't worry about file size (only the duration).
A "data" DVD is limited to the type of media used. A single layer DVD is about 3.7 GB's.
In order to make a data DVD you need to keep the data rate low enough to not exceed the DVD media playback abilities. They can't handle the higher rates found in many of the preset options.
You can avoid all of these headaches by telling the viewer to "copy" the .mov file from the DVD to their Desktop. Then nearly any of the presets option will work.
H.264 is a great video codec and the "automatic" preset should work just fine. Use "multi-pass" for best quality (takes a very long time). Remove the check mark for "Audio" since your file has none. Leave it checked and you waste file size because a silent audio track would be added.

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

(Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.

All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

What is the best virus remover and protector for 10.5.8 version of mac os x??? mac os x??? mac os x. there is this thing called macprotect that keeps popping and trying get into my systemt psoror t

what is the best virus remover and protector for 10.5.8 version of mac os x??? I have this thing called macprotector that keeps popping up and trying to get into my computer. I have heard of a maleware remover...

First you do NOT I repeat DO NOT have a virus, currently there are no virus's for OS X. This means you do not need antivirus software, if you insist on installing antivirus software then I'd recommend ClamXav. You have what is called a Trojan, the primary difference between the two is the user has to give permission for a Trojan to download and install itself. The one you got is going around right now however the good news it's quite easy to get rid of. Please read the following article for instructions.
Malware Removal
Roger

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

HT5848 What is the sampling rate and codec for iTunes Radio. Is it lossless encoded?

What is the sample rate and codec for iTunes Radio? Is it lossless encoded?

I have to agree with you. There are several forum discussions on bit rate being as high as 256 kbps but I don't see how it could be more than 96 kbps based on the poor sound quality I'm hearing. I'm comparing it to an internet radio station that is 128 kbps and sounds much better.
Am I missing something?

Data Visualization and Graphs for JSF

Are the Data Visualization and Graphs for JSF included in this release. I saw the demo here http://www.oracle.com/technology/products/jdev/11/index.html and want to try it out. But I could not seem to access it in the tool.
Regards
Orlando Kelly
Cayman Islands Government


Hi,


It seems you have no suitable libraries in your ViewController project. See on this image whet libraries you need.


Kuba

Best external hard drive format for use with mac and windows?

This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
Anyways to the question(s)
This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
What is the difference between fat 32 and exfat?
A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
https://discussions.apple.com/docs/DOC-3044
If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
And a silly question, Can you dual format a hard drive?
Note: This format is for an external hard drive.

I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
I really do still need this information and I need to back up my drive before I can take the computer in for service.

What dimensions for big-screen presentation?

Almost everything I do is for presentations for either my employer or my church. I've experimented with WMV, MOV, and AVI but I'm still not sure what will look best that large. Since there are no rulers in FCE's Canvas or Viewer and I haven't found a place when creating a project to specify the dimensions like in Flash. The only time I'm "sort of" prompted for dimensions is when exporting from QuickTime Pro and those settings don't seem large enough but perhaps I'm mistaken. Is there a web site I could go to for such info?

FCE is a fixed resolution application, DV or HDV only.
How is the material you're presenting getting onto a screen? Computer playback? Projector? Playing back from a deck? That's the governing factor, that and the format you're working in. Video formats have fixed sizes unless they're being put on a web, where they can be any shape you want.
The higher resolution format you start with the better the end display will look. Shoot in DV and there's a limit to how large you can make the image before it becomes objectionable. Good shooting and good lighting will go a long, long way to making even DV material look good on a big screen.

Procedure and Format for emailing a short video clip from iMovie 08

I use one of the new Panasonic HiDef AVCHD digital video cameras. iMovie 08 works great, no complaints there. From time to time I would like to email very short (5-20 second) video clips, rather than putting them up on iWeb, YouTube, etc.
There are so many "sharing" options, and I haven't had much luck with emailing these short clips. Many of the recipients are Windows users, so I'm not sure QuickTime is the answer. What is the best way to email short video clips from iMovie 08?

What is the best way to email short video clips from iMovie 08?
Assuming you and your recipients' mail clients all allow attachments up to 10 MBs, then a 20-second clip can have a combined data rate of up to 500 KB/s (4.0Mbit/s). This means you can use any share/export compressions format option available to you from within iMovie '08. Therefore, the real question becomes, what compression formats can your recipients play. Have you tried asking them to see if there is a single compression format that everyone can play? If no QT compression format is compatible everyone, then you will likely have to perform a secondary conversion to one that will be compatible. H.264/AAC would provide the smallest files for a given level of quality but require QT 7 (or similar multi-media player). MPEG4/AAC would probably be the most compatible format you can export directly from within iMovie '08. (Would have recommended Sorenson 3/IMA but data rate limitation appears to be ignored.) MPEG-1 files can probably be played by everyone but have higher data rate requirements which may restrict files to SD dimensions and require additional software to create external to iMovie '08. DivX or WMV would probably make your Windows users happy but requires Mac users to have a compatible component for viewing in the QT Player.
Try the "Export using QuickTime" Share menu option ("Movie to MPEG-4") settings:
Video
MP4 File Type
MPEG-4 Improved Compressor
Data rate in the range from 1,000 (640x480) to 3800 (near HD dimensions)
Current (or user specified) dimensions
Current Frame Rate
Key Frame every 24 frames
Audio:
AAC-LC Music
Mono
64 Kbps Data Rate
44.1 KHz Sampling Rate
Better Quality

Best Hi Def File Format for PE 10 on a PC?

I am running Premiere Elements 10 on a PC, Windows 7 Professional 64 bit, two internal 1 TB Hard Drives, 16 gigs of RAM, with Blu Ray Burner drive. I have done a fair amount of video editing using PE 10 on this rig with standard def material, but now I hope to do some high def work. I plan to have some old family 16mm home movies transferred to hi-def media and do some minor editing (color / contrast correction and maybe some simple transition effects) and then burn the edited files to Blu ray disc.
I am all ready to send my 16mm footage off the the transfer house, but I need to know what would be the best file format for my set up. The formats they have available are DPX Image Sequence, TIFF Image Sequence, and Quicktime (either 422 HQ or 4444 HQ). I am assuming the preferred format would be either of the Quicktime files, and I have downloaded short (about 10 to 15 second) sample files in both 422 HQ and 4444 HQ and was able to import each into PE 10 with no problem and successfully do various edits on each.
But I have read a good number of posts on this and other forums from PC owners who are running Premiere Elements and have had problems either loading Quicktime 422 & 4444, or editing them once they were loaded into PE.
Can anyone comment on this for me? Basically, all I want to know is what Hi Def file format(s) I can reliably use on my computer with PE 10. I don't want to pay several hundred dollars (or possibly more) for a digital transfer from my 16mm footage that turns out to be useless to me.
Rob McKay

ATR -
Thanks for your very informative reply. I'm afraid the transfer house doesn't offer samples.
Since you think the ProRes 422 would be best for me, here is what I have done in my own tests:
1) Downloaded short ProRes 422 HQ clips into files on my computer hard drive from several websites. The longest of these clips is 30 seconds.
2) Using the "get media" tool in PE 10, I've brought these clips into PE 10.
3) Dragged the clips into the project timeline. At first I got a popup message saying (and I have paraphrased this) the "file format is not supported by PE 10. Would you like the program to convert it to a format supported by PE 10?" I clicked "yes" and the clip appeared in the timeline. Later on I stopped getting this popup message. I've no clue what format the program might be converting the ProRes 422 HQ files to.
4) After I had a couple minutes of short clips in the timeline, I copied and pasted some of them over and over in the timeline until my entire video time was about 30 minutes in length. Reason for this was simply because I am trying to replicate as best I can what my file from the Transfer House will be like - not 2 minutes in length, but closer to 30 minutes.
5) Did a few minor editing effects on the timeline of the sort I would be doing on my Transfer House file - contrast and color correction, time stretch /speed change, etc.
6) Went to "Share" tab, clicked on "Disc - Burn to Blu Ray". In the Presets dropdown menu, I chose "H.264 1920x1080i NTSC Dolby" (Note - Only four choices appear. The one I chose, as well as "H.264 1440x1080i NTSC Dolby" and the same two again except in PAL Dolby.)
7) Burned a BD-R of the project in Blu ray burner.
I was very pleased with the result - image was nice sharp quality, smooth moving (no dropped frames) and filled my 4 foot x 8 foot screen when played on my Blu Ray player through an Epson projector.
Rob

How to use the (gigabit) ethernet for data exchange and WLAN for Internet?

I have following setup:
- MB Pro SL 10.6
- Desktop PC Windows 7
- Wireless Printer
- Netgear WLAN Router
At the moment all my data and internet communication is done via the WLAN router on 192.168.1.x That works fine and I can exchange data, print and surf the internet. My problem is that big data exchanges > 10GB take ages via my 54Mbit WLAN Connection. Furthermore the WLAN router is far away from the PC so that it is not possible to plug in the Ethernet Cable of the PC and the MB to the router.
Now I've thought that there must be a possibility to use a 1 gigabit (cross) cable (like in the 90s ;)) to connect the MB and the PC directly. I know that I will need different IP ranges and so on, but I have no clue how to do that.
The final solution should be that the setup stays as it is (data exchange, print, internet via WLAN) and that additional it is possible to connect PC and MAC some times for big transfers via a Gigabit ethernet cable. because I only want to connect those two machines I don't think that a switch makes any sense, or?
Does someone know how to do that?
Thanks a lot in advance!
Message was edited by: whitepowder

Well if it were 2 Macs, I would configure each Mac with a fixed IP address (same subnet as my router, but outside of the routers DHCP assignment range).
I would give the same fixed IP address to both my Airport AND my ethernet interfaces. I would do the same to the other Mac using another fixed IP address.
My network service order would have the ethernet higher than the Airport on both systems.
Normally I would use WiFi, so ethernet would be idle and out of the loop.
When I wanted faster transfers, I would connect each Mac to the router via their own ethernet cables, and the Mac would automatically detect that the ethernet became available, and would switch to use the faster ethernet. Since Airport and ethernet have the same fixed IP address, I could even do this in the middle of a file transfer and no one would notice as packets were always going to/from the same IP addresses, just using a different route, which doesn't matter.
NOTE: I've been doing this on Macs since Mac OS X 10.3 days (or was it 10.2; to long ago to remember).
However, you have thrown a Windows system into the mix, and since I do not use Windows, I do not have a clue about what can be done on Windows. However, maybe this will give you some ideas, and asking the right questions in a Windows oriented forum may provide the Windows side of this setup.
Sorry, that is the best I can do. Maybe my reply will encourage someone else to offer their approach.

Max resolution and format for Apple TV from imovie and itunes

I use iMovie '09 to make movies from my HD 1920x1080P camera that I SHARE to mobile me, itunes and for use on Apple TV via itunes.
I am trying to figure out the max resolutions and formats.
If I SHARE from imovie with 960x540 it goes right into itunes and shows as an HD movie on the Apple TV
If i export from imovie in 1280x720p i can drag into and play from itunes however it doesnt show up on the Apple TV? i thought the apple TV supported 720p? is the format wrong? when you export it comes out as .mov and when you SHARE it comes out as .mp4?

I have been struggling with this for some time. We have great HD cameras, and fairly capable consumer grade video editing capability with iMovie; but we have limited HD viewing opportunities other than a computer.
Apple TV does play it in 720p provided you meet the specs below - perhaps your 720p movie exceeded these specs. You see, there is 720p, and then there is 720p with serious Mbps.
At least for me, when I export at 720p @ 5Mbps the viewing is jittery and not smooth. I guess it is too much processing, although it seems to work fine when it is a downloaded movie in HD, just not an iMovie production.
So, I just use the 960x540, which is clear and smooth, and wait for the day an improved Apple TV hits the market with the processing power to smoothly handle 720p and beyond. I have a big (100") screen, so I can use all the resolution I can get to keep that large of an image sharp.
The alternative is to use a Mac mini and route through HDMI to your TV. That does a good job but is more expensive (triple) the ATV.
Video formats supported:
H.264
up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution 1280x720 @ 24fps, 960x540 @ 30fps) in .m4v, .mp4, and .mov file formats
MPEG 4:
• up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution 720x432 @ 30 fps) in .m4v, .mp4, and .mov file format

Best Data rate and format for Big Screen Playback

Similar Messages

Maybe you are looking for