Best device for external monitoring? Sure to be a popular topic.

Any thoughts on the best device? I am a one person shop and am very pleased with the update. I like X and have been using FCP since version 1. I had a Kona 3 and was very pleased with the product so I will most likely purchase the new io XT. Customer support was great. And the party AJA threw at NAB wasn't bad either. Now that I cut on a an iMac, I have been waiting for this update. I see that Blackmagic has a device at a much lower price point. Are you getting what you pay for? What product has the best features?
I would really appreciate any thoughts.
Cheers.
Tom

Hi,
it is not necessary to enter the exact amount for external service in PM order ,
exact amount must be confirmed during service entry sheet ml81n
or it also be adjusted during miro ( invoicing )
and for prininting , most of the part as u said are covered in standard printing of Maintenance order, PR and PO
otherwise there must be customized PO printing in ur organisation that can be change if ur requirements does not meet
Regards,
Jitender

Similar Messages

  • I'm in the market for a laptop.  Which of Apple's laptops will I best connect 2 external monitors/displays?

    I'm in the market for a laptop.  Which of Apple's laptops will I best connect 2 external monitors/displays?

    I've just bought a Pro Retina. As far as I know this is the only one which will connect 2 external monitors running different programmes ie not cloned.
    You use the 2 thunderbolt ports for the DVIs (if they're not Apple monitors)
    You need 2 thunderbolt to DVIs. MiniDisplay port to DVI might work too (MIGHT WORK! Not sure yet) and these are a lot cheaper.

  • What is the max resolution for external monitors from the intel hd 4000 graphics driver

    What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

    OK so after doing much research... this seems to be the best workflow.
    Bring HDV in to FCP as ProRes 422.
    Edit show... add bells and whistles, etc.
    Export movie as ProRes 422.
    Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
    The client will then be able to play a movie encoded as proRes 422 and all will be happy.
    As a back up a high resolution h264 file can't hurt.
    Thanks for everyones input. We got there in the end.

  • Best practise for external service when amount is not sure

    Hi friends ,
    What could be the best practise from the PM side when we want to send an equipment for external repair
    and the service cost is not sure .
    Also if we will create only service PR and not PO then there could be some legal problems while sending the equipment outside.
    What I am thinking is to create a service PR -> PO and then setting the actual cost while invoicing .
    Is it fine ?
    We would prefer if we can take some print out of the external service mentioning following data through standard SAP :
    1) Vendor Name
    2) Our Co name .
    3) Address from where the equipment is dispatched
    4) Address where equipment is to be sent .
    5) Contact No .
    6) some Dates
    Any suggestions.
    Regards
    AM
    Edited by: Amehra on Jul 7, 2011 1:53 PM

    Hi,
    it is not necessary to enter the exact amount for external service in PM order ,
    exact amount must be confirmed during service entry sheet ml81n
    or it also be adjusted during miro ( invoicing )
    and for prininting , most of the part as u said are covered in standard printing of Maintenance order, PR and PO
    otherwise there must be customized PO printing in ur organisation that can be change if ur requirements does not meet
    Regards,
    Jitender

  • Recommendation for external monitor

    I have a G4 12" 1.5 GHz PowerBook with 768 MB of RAM, currently running 10.4.7. I'd like to buy an inexpensive external monitor, and am currently looking at a Dell 19" flat panel (model number SP1908FP). I'm pretty ignorant about monitors; I've read some of the discussions on this board, and looked at the specs for my laptop, but I'd like a confirmation before I buy it. The Dell monitor specs say 1280x1028, and although I don't actually know what that means, I see that it matches the PowerBook specs. Do I need to know anything else? And what do I need in the way of connectors? Should I be looking at other brands?
    Total newbie about this stuff, so all help is much appreciated!
    Thanks.
    eMac, 12" PB G4 1.5 GHz   Mac OS X (10.4.7)  
    eMac, PB G4 12"   Mac OS X (10.4.5)  

    My recommendation would be to get a widescreen monitor, as I think it fits more with the Apple design.
    Your 12" PB came with a mini DVI to DVI adapter (you do remember where it is?). Using this adapter, you can hook it up to a monitor that supports a DVI input, which means you can display a digital signal - the computer doesn't have to convert it to analog first. I think the digital signal produces a crisper display.
    We use a 19" Samsung widescreen monitor (model 940BW) on our mac mini (not a PB, I know), and it provides a great, widescreen, digital picture. The Samsung came with the DVI cable, so we didn't have to buy one. Got it from Sam's, around $200.
    On an LCD screen, I think it's important to buy locally from someplace with a good return policy. Sometimes you can get a display with dead LCD pixels, and many vendors won't take them back unless there are a fair number not working (as I recall, one vendor says there have to be at least 8 pixels not working). If you buy from the internet, make sure you understand their return policy, and ask about dead pixels indicating a defective product (if you decide you don't want it, many companies will make you pay for return shipping. Defective mechandise most vendors will pay return shipping).

  • Top screen resolution for external monitor

    I have a bit of a dumb question.  I have a Lenovo T410i, with integrated graphics.  Is the top resolution it can drive an external monitor at 1440 x 900?
    And does that mean there is no point in getting a monitor bigger than 19inches?
    Many thanks,
    Joe
    Solved!
    Go to Solution.

    well that really depends on what uses you have in mind. What are you going to use your external monitor for?
    Personally, when i use laptop as a desktop replacement, i would usually use 2 external LCDs, usually at least 19 inch in size. Most likely i would be using a 24 inch and a 20 to 22 inch.
    Currently, the 22 inch and 23 inch format have the best pricing, and most people whom purchase these monitors would take that into consideration.
    The intel GPU is fine for driving these LCDs, i use my T400 to drive a 24 inch and a 22 inch. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • IMac always auto detects for external monitors after waking from sleep or from display off

    I've got a Dell 24" monitor (2408WFP) plugged into my mid 2011 iMac via DVI cord and thunderbolt attachment. Things work fine.
    When I need to leave my computer, I usually turn the displays off using the shortcut keys: CTRL + SHIFT + EJECT
    This works perfectly and both displays go black. However, when I return to my computer and reactivate the iMac, the iMac display will turn blue as if I have just plugged in a new monitor even the external monitor is still plugged in. It usually flashes blue twice before displaying the password prompt. I can usually just log back in as normal. I've never had this happen before using Snow Leopard. It's annoying but strange.
    However, even more strange is that sometimes when returning to the desktop, the iMac will do the auto detect display thing and then when I log back in, the external display just shows static as if there is no signal. I've checked the cable a million times and everything is as tight as tight can be and both ends are plugged in properly. Unplugging the displayport adapter from the iMac and then reattaching it restores the desktop on the secondary display although sometimes, it results in the secondary display showing a gray background picture instead of my normal picture. Replugging the secondary display seems to fix that too although sometimes it doesn't.
    Why is this happening?
    - Problem with the adapter?
    - Problem with the DVI cable I'm using?
    - Compatibility issues with my external monitor?
    I need to stress the point that this has never happened before with Snow Leopard.
    If I am the only one experiencing this then I suppose it may be an issue with the iMac or adapter or even the cable. But if anyone else can shed light on this problem, I'd really appreciate it.

    Hi Micheal,
    I've been experiencing the exact same issue with my new iMac I just bought.  I bought it refurb so I wasn't sure if it was a defect with the hardware or not.  Since I'm not the only one I will asume it's not for now.
    Setup:
    - iMac 27-inch 3.4GHz (Release May 2011)
    - Dell 2709W external monitor
    - Hooked in with mini display port to DVI adapter
    - Lion 10.7.3 all up to date to this day
    From what I've been able to gather the issue presents itself only when my Dell 2709W enters "Power Save Mode" after I do CTRL + SHIFT + EJECT or when the diplays simply goes to sleep by themselves.
    Although if I hit that combination and the displays goes to sleep but I don't wait long enough for my Dell monitor to actually "Power Save Mode" (wait like 2 sec) then touch the keyboard then the 2 displays (iMac and Dell) resumes from sleep without the issue presenting itself.
    I'm tempted to buy the mini-display port to HDMI just to see if the issue is still present with that adapter.  If I do I'll update my post with the outcome.
    If anyone else has any info to help with this issue it would be greatly appreciated.  It's very annoying when you resume from sleep and you find all of your windows that where opened on the external display before sleep squeezed into your main display (iMac).
    Thanks!

  • Best solution for 2+ monitors CS6

    After reading discussions about the flaws of external hardware (matrox, BM, AJA) - or at least the drivers needed, I want to find the right solution for using two computer monitors for my Workspaces and a third (HDMI or HD SDI) output for a 37-inch program monitor (not broadcast, but decent Panansonic LED). I have been reading tons of specs and posts... what is best? I am planning a new CS6 workstation
         1. Dual Quadro 4000s
         2. Dual GTX 570s or 680s
         3. some new idea??
    Why can't Nvidia make all three ports active on the Quadros?
    Wishing Adobe would post more than just minimum specs, but some kind of details on levels of workstations based on types of workflows...
    Thanks,
    Diane
    PS I've been using a $50 HP USB signal splitter on CS5 for a couple of months - it's been great - allowing me to spread my Workspace across two monitors with HDMI to the panny monitor. But that can't really be The Solution, can it?!?

    GTX 670/680 cards support up to 4 monitors. Dual cards are not supported, nor is there a need for with the Kepler range of cards. Well, a bit more detail, you can install two cards if they use the same driver, but only one will be used by PR and the other only for steering monitors and that is a bit expensive with Quadros or the GTX 570/580, when a single 670/680 does the same job at much lesser cost and with better performance on most systems.

  • Dead screen, laptop locked in Safe Mode with no HDMI driver for external monitor

    Hi,
    Background: This is a Windows 8 pre-loaded notebook, I have updated to 8.1 (some months ago) via the Store.
    I recently had the dead screen that appears quite common with HP notebooks.
    I connected an external monitor, notebook was fully functional.
    Backed up all contents, then updated graphics driver, no improvement.
    Then went into msconfig and forced boot into safe mode...
    Now, I cannot control the notebook at all because I can't see anything.  At this point I am just trying to get control of the notebook so I can wipe it, and sell it to a repair place, or as a notebook that works fine with a docking station or external monitor.
    Questions I have:
    1. WITHOUT SEEING THE SCREEN (dead) is there any way to get it to boot back to Windows Normal mode, or any other HDMI-driver enabled mode?  
    2. As an alternative is there any way I can get it to boot from a USB to any operating system so I can wipe the HDD and start again?
    3. Would (2) even work if I need a HDMI driver to operate the notebook - would it be possible to reinstall an OS with a dead screen, because I would need to be able to run an external monitor?
    4. How do I find my Windows Product Key without access to the notebook (can HP help here, from my notebook serial #)?
    5. Any way to perhaps mount the HDD externally in order to manually edit the boot config to return it to Windows Normal booting?
    Grateful for your comments.  Remember my objective is NOT TO FIX IT, just to get it to drive an external monitor again so I can part with this notebook with some kind of financial return.
    Dom

    Hi @Dom_Oz ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I see that your display quit and you connected an external monitor and it was functioning well.  You backed up all your data and updated graphic drivers but there was no improvement.  You booted into safe mode and now both screens are blank.
    Since both screens are blank when you booted into safe mode, I would try a Performing a Hard Reset or Forced Reset.
    to try and bring back the external monitor.
    If that does not work, can could try to do a recovery Performing an HP System Recovery (Windows 8) 
    The Windows product key is tattooed in the bios and is hidden, but if you do a recovery it should automatically get picked up.
    Yes you can try booting to an OS on a USB stick to wipe the hard drive.
    Yes you can remove the hard drive and install it in an external case and then edit as you wish or format  from there.
    If you edit the boot config and manage to have Windows reboot, I would do a factory recovery, this will  format the drive and return back to its original condition.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Late 2010 MBP WIll No Longer Display 1080p for External Monitor

    I currently use my 15" 2010 MacBook Pro with an external monitor via an HDMI cable using the Moshi HDMI miniport adapter. Recently when I connect the monitor (I've also tested on a different HDTV and have had the same issue) it recognizes a signal but all it displays is black. Only when I change the signal to 1080i do I get a picture (a poor quality picture). Is there any fix for this? At this point I'm thinking that it's either the adapter or the MBP's hardware that is messed up. I have been using this HDMI adapter without issue since the summer.
    Any help would be appreciated.

    To light up automatically, your display must appear in:
    About this Mac > ( More Info ) > Graphics & Displays ...
    ... by Make & Model.

  • Basic Strategy / Best Practices for System Monitoring with Solution Manager

    I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
    We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
    Thanks in advance for any comments or suggestions!

    Hi Mike,
    Did you try the following link ?
    If not, it may be useful to some extent:
    http://service.sap.com/bestpractices
    ---> Cross-Industry Packages ---> Best Practices for Solution Management
    You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
    Best regards,
    Srini
    Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

  • Best Practice for External Libraries Shared Libraries and Web Dynrpo

    Two blogs have been written on sharing libraries with Web Dynpro DC, but I would
    like to know the best practice for doing this.
    External libraries seem to work great at compile time, but when deploying there is often an error related to the external library not being a deployed component. 
    Is there a workaround for this besides creating a shared J2EE library which I have been able to get working?  I am not interested in something that works, but really
    what are the best practice for this. What is the best way to  limit the number of jars that need to be kept in a shared library/ext library.  When is sharing ref service/etc a valid approach vs. hunting down the jars in the portal libraries etc and storing in an external library.

    Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
    I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
    using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
    http://pauliom.wordpress.com

  • Best practice for external but secure access to internal data?

    We need external customers/vendors/partners to access some of our company data (view/add/edit).  It’s not so easy as to segment out those databases/tables/records from other existing (and put separate database(s) in the DMZ where our server is).  Our
    current solution is to have a 1433 hole from web server into our database server.  The user credentials are not in any sort of web.config but rather compiled in our DLLs, and that SQL login has read/write access to a very limited number of databases.
    Our security group says this is still not secure, but how else are we to do it?  Even if a web service, there still has to be a hole in somewhere.  Any standard best practice for this?
    Thanks.

    Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
    I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
    using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
    http://pauliom.wordpress.com

  • Built-in Isight for External Monitor with Macbook closed

    Hello Apple Community,
    I'm having trouble using my built-in iSight through my external monitor. My set-up is that the Macbook is closed and I run everything through an external monitor. I'm unable, however, to use that external monitor's iSight with any applications. They either say that there's no camera available or something along those lines. The iSight shows up in the system profile under USB, and I've tried resetting various things, but all of that seems geared more to the macbook than to the monitor. I've also woken up the macbook (where the iSight works fine) and tried mirror/non-mirror modes. When I use a camera-based application via the macbook, it doesn't give me an option of which camera to use, relying only on the macbook's. Is there a way to use the external monitor's camera instead?
    Thanks,
    Abe

    Does one of these help you, Abe?
    (1) Your Profile "Products" info shows " MacBook Pro, Mac OS X (10.4.1) ".  If this is correct, you may be using an early MBP and/or display.  Have you checked for the firmware update? http://support.apple.com/kb/HT3957
    (2) Consider Apple's suggestions from the "If the built-in iSight camera, microphone, speakers, or USB ports on the display are not working:" section of http://support.apple.com/kb/TS2400
    (3) If you are using a non-Apple external display, contact the seller or manufacturer for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.2

  • 128MB vs. 256MB Video Card for External Monitor?

    I may want to run an external monitor for Final Cut Pro HD. Will getting the 2.16 Processor with its 256MB Video Card drive an external monitor any better than the 1.83 w/ 128MB Video Card? TIA
    BTW, I won't be "gaming" at all. Just doing a little FCP HD...
    20 G5 iMac/2 GB RAM/250 GB HD   Mac OS X (10.4.2)  

    Randy, I believe you have great technical knowledge
    (much more than me) and your math is unobjectionable.
    But in my opinion 16% of the graphic card's capacity
    just to light up the monitors is not a low figure.
    Actually, for generic 2D stuff that doesn't involve OpenGL, Randy has it correct. You'll find that VRAM makes absolutely no difference to Photoshop, for instance. A couple of big screens will happily run on 64MB VRAM.
    Once you start running pro applications on those
    monitors, and expect real-time responsiveness and
    lower and lower rendering times; you might come to
    realize that 128MB of VRAM is enough, it's a lot...
    but not excessive.
    You only need the extra VRAM for apps that specifically use the graphic card, through OpenGL, Core Image, Core Video or similar. Of course, there are more and more apps which leverage the graphics card this way, so 256MB is going to be more future-proof, and is what I went for.

Maybe you are looking for