Best display profile for video editing

Among the choices you see under Display Profile on a Mac, what is considered "best" choice for video editing, so that you can assess color, exposure, etc. in your footage as you edit? I have always used Adobe RGB (1998), but realize that I have no knowledge about whether that's a good choice.
What do the 'good' editors use (to differentiate them from guys like me)? Do top editors calibrate their monitors for video editing? Any insights into this would be greatly appreciated!
-- Mark Strand

what is considered "best" choice for video editing
there is only one setting for Final Cut; Generic RGB
This is an apple stipulation, its how Final Cut must be set up, choosing any other profile will cause problems with any out put files you create.
Do top editors calibrate their monitors for video
ICC colour management is designed and can only be used for still image files eg. so while you can calibrate a computer monitor it can only be used with still image files; TIFF CRW JPEG PSD. ICC profiles are not recognised by Final Cut Pro or QuickTime.
The colour management system used in video involves using video scopes, an accurate PAL or NTSC colour monitor and tools like the 3 way colour corrector.

Similar Messages

What is the best Apple notebook for video editing and pro music creation?

What is the best Apple notebook for video editing and pro music creation?
I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

What is the best macbook pro for video editing dslr footage?

what is the best macbook pro for video editing dslr footage?

It is the GPU that is important. All the CPU's will be fast enough. If you can affords it, the 15" with the NVIDIA GPU is the best.
Ciao.

Best Apple Computer for Video Editing (when you're on a budget)?

I shoot video on a Canon XL2 and edit with Final Cut Express. I am looking to get a more powerful computer to edit as I currently edit on a 2007/8 MacBook with 120GB hard drive. It gets the job done but rendering takes forever and I can tell my MacBook is slowing down. What is the best apple computer for video editing? And, what would you recommend if you're on a budget? iMac? MacBook Pro? Thanks for any and all help.

Well, depending on budget...
Today, this would be my personal choice...
http://store.apple.com/us/configure/MC560LL/A?mco=MTg2OTUwMjQ
(3.33 GHz “Westmere” 12 GB Memory)
http://store.apple.com/us/configure/MC511LL/A?mco=MTg1ODA4MDM
(2.93 GHz “Quad-Core i7” 8 GB Memory)
If portability is an issue...
http://store.apple.com/us/configure/MC024LL/A?mco=MTc0Njg1NzI
(2.8 GHz “Intel-Core i7 ” 8 GB Memory)
Regards
Nolan

Best affordable choice for video editing & other stuff?

I've been a PC user forever. I'm looking to enter the world of Mac. I do video editing with Adobe CC on a windows 7 Destop PC with an i7 Quadcore and have a nice LED monitor. I'd like a Mac capable of doing graphics well and has the processing power of an i7. I was thinking of a Macbook rather than than a iMac because I don't need the built in screen - I already have a very nice LED monitor. I also like the idea of portability. So I figure i could hook up the Macbook to my LED monitor when at my desk, and then be able to port it around when I wanted to go mobile. Is this reasonable? Is a macbook laptop capable of this kind of processing? I know my HP Powerbook with Win7 struggles doing this kind of stuff even though it has a dedicated nVidea Graphics and is an i7 2.3GHz with 16G memory, so I never use my HP laptop for video editing. I thought about the Mac Pro, but that is WAY out of my budget. Is there a Macbook that would be good for video editing and not break the bank? Like I've said, I'v discounted the idea of getting an iMac because of space & (I already have a decent size LED monitor that I'd like to continue to use and share with my Windows PC.

the last 2 and the bottom of this link would be more than adequate: http://store.apple.com/us/buy-mac/macbook-pro

What is the best set up for video editing?

What is the best computer? The best software? The best external storage? The best ram? 3D editing? Everything!!!!!!
Running full HD and 720p at 60 fps videos. Clips ranging from a few seconds to 10-30 minutes.
Cost isn't an issue.
What is the best set up, not the most excessive. If it doesn't need to be there or it isn't greatly needed I would like to know. This is looking at the production aspects, not the camera and such. What is the best plug in for slow motion? Pros and Cons of the set up?
I would greatly appriciate everyones input in this. Thank you so much.

That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
A high end windows pc (only cause mac pro hasn't been updated in ages)
Avid Media Composer with Nitrus DX
Two monitors
Broadcast monitor
HD Deck
pimping 5.1 speakers
A good mixer
You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
If price is not an issue then there you go....
However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
Have a second monitor..
I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
Be more specific and you will get clearer answers..

Best MacBook Pro for video editing

Any suggestions - I would like to purchase a MacBook Pro but I want to some video editing with it -which is the one to look at? Thanks

The best one is the model without the word "Book" in it...
You don't say what you want to edit, but in general, editing is a horsepower game so you'll want a lot of RAM, a fast system disk/SSD and the fastest processors and video board available. Don't expect to do much on the battery because all those resources (plus your external media drives) will severely limit your battery life.
You may also want an external monitor and plan on either USB 3.0 or Thunderbolt external drives for media and scratch storage. The bigger, the better.
Hope this helps

Best Mac configuration for video editing

I am going to be getting into video editing at work and have about a $6000 budget for the software (Final Cut Studio) and the hardware to do the work on. I'll be doing short 3-5 minute videos as well as some lengthier 20-30 minute videos. Those of you who have a lot of experience working with FCS, what would be your recommendations for my Mac configuration? Memory, Drive, Storage, etc. Thanks!

Buy the best MacPro you can afford. Go for the best ATi video card that is an option, try to get at least a gig of RAM per CPU core, and don't skimp on your storage.
At that budget I'd say 8 core 2.4, 12gb RAM, 1tb boot drive, 2x 2tb editing drives, the ATi 5870, and a single 27 inch window. That comes in at about 5700 without FCS. The cuts I'd make if that's too much are 8gb RAM and 1 2tb drive for editing to get down to 5100, 6100 with FCS. If you can wait Final Cut X comes out this summer for about $300. We don't know a whole lot about it yet, but the better specs with FCX will be a lot faster than the lower specs with FCS. Whether or not you can wait is a question you need to answer for yourself.
If you don't need the monitor change your boot drive to the SSD.

The best RAID level for video editing that has some form of redundancy?

I've been asked to help find the best solution for importing and editing large amounts of HDV (25 Mbit/s) video. However, those whom I am helping also want a level of redundancy that will allow a single drive to fail and their data to be preserved. So what I'm trying to figure out is the best RAID level (or levels) for their need. I'm fairly certain that either 0+1 or 10 is what I'm looking for, however the I/O performance differences between 0+1 and 10 aren't quite clear to me. If someone could explain that to me I would appreciate it. Additionally, if someone knows a better level than either 0+1 or 10 for the needs I described, please don't hesitate to let me know.

The difference between RAID 10 and RAID 0+1 is how the array is created.
RAID 0+1 creates a RAID from multiple RAID 0 arrays that are mirrored.
You can tolerate any number of drive failures in any one side of the mirror (that side of the mirror goes offline as soon as any one disk fails, so it doesn't matter how many other disks fail in the same array), but one drive failure on both parts of the mirror will trash your data.
RAID 10 creates a stripe of multiple RAID 1 mirrors.
In this setup you create RAID 1 mirror sets and stripe them together.
In this setup you can tolerate one disk failure in each element of the stripe.
For example if you have 6 drives you might create three mirrors of two drives each, and each mirror is then striped.
You can lose one drive in each mirror, but if you lose two drives in any mirror set, you're out of luck.
In both cases, though, you're not going to get the best usage out of the array since mirroring has a 50% overhead - meaning you're only going to get 50% of your total disk capacity as usable space.
With the XServe RAID, the RAID 5 performance is very good - good enough for your 25MB/sec throughput so I'd go with RAID 5 arrays, not RAID 0 or 1 on the XServe RAID itself.
Then, depending on your space requirements, you can either stripe or mirror them together for a RAID 50 or 51 array. In this way you gain the data redundancy of RAID 5 with better disk utilization than 10 or 0+1.
RAID 50 will give you the best performance (and the most usable space), RAID 51 will give you the best redundancy.
At the end of the day it's up to you to decide which format to use based on performance and usable space requirements.

Best external harddrive for video editing.

Hey all,
I'm looking at getting a new external hard drive. I need speed over capacity and wondered what people thought of the g-raid systems?
Much thanks, mungo.

I love G-Raid. Nothing but good things to say about them. I had a bad drive... dropped it off at their office in Santa Monica at 9:30am and picked it up same day at 5:45 and I'm just a little guy.
They did have some issues with power supplies for a short run, but quickly cleared it up. On the Customer Service side, they also got overwhelmed due to rapid growth, but quickly addressed the issue.
Heck.. they even fixed a client's drive that I dropped off as a courtesy to the client, at no charge, and saved all data. It was 1 year out of warranty. That my friends... is Customer Service at it's finest.
In my book they are the best. I don't think I'll ever see LaCie, Seagate, Maxtor, or Western Digital provide that kind of top-notch service.
Sorry you had a bad experience Studio X, but these guys are the cream of the crop in my book.
Cheers!

Best Internal HD for video editing??

I bought my Mac Pro month ago with only a 250gb HD, i want to buy a new HD to run windows Vista, i have parrallels desktop but it only uses 1gb Ram from my 4gb I have on my system...i use Final Cut Pro as well as Premiere Pro and other Adobe and windows applications that i cant run on a Mac.. so i was thinking of getting a new HD 2 run windows with Bootcamp
* i dont want to mess with the same HD since windows still have problems with viruses so i want to run both OS in separate HD.
I want to know what is the best internal HD to run heavy windows applications on my Mac (with Bootcamp) seagate, Maxtor?? plz give me the models and serial#s
Thanks
Hansel Jr.
Mac Pro Mac OS X (10.4.10)

I don't want to mess with the same HD since windows still has problems
with viruses so I want to run both OS in separate HD.
There is nothing to stop a Window's virus from formatting a second disk drive, even if it doesn't know how to read or write its file system. It's no harder than wiping out a second partition on the same drive as Windows, so using separate drives is not adding much more protection for OSX against Windows. You just have to trust your virus protection on Windows. Of course, having separate drives does give you the option to unplug the OSX drive before you boot Windows. (Turn off the power first.) It would be nice if SATA drives had a connection for a write disable switch.

Best Monitors for video editing??? NEC LCD2690WUXi² Vs 24"Apple GLOSSY LED

I am so stuck finding the right monitor for video editing in my price range i just cant afford the 30" apple cinema display, what is next best solution out there...?
Is Anyone using the NEC LCD2690WUXi² Monitors? from what i can tell they are better than the 24" apple LED displays for video editing as...
a) anti glare screen & can be properly colour calibrated
b) 26" screen Vs 24" screen size
c) got DVI-I & DVI-D Connectors so compatible with NVIDIA GT 120 outputs (1 Mini DisplayPort and 1 dual-link DVI-D)
i would love the 30" apple but the NEC comes in at 1/2 the price so i can eventually buy two & i would have definitely taken the 24" but its just not suitable for professional video editing from everything I've read - mainly due to glossy screen, colours & calibration
pls can anyone help with any display solutions/setups
warmest regards
graeme
Oh PS do the NEC LCD2690WUXi² work flawlessly with the latest "Nehalem" Mac Pros?

Not sure if that model number is here or not, but these are supposed to be very good for color work, though I do know that my old shops are still using their CRT's.
http://www.necdisplay.com/Products/Series/?series=171d9fbb-281e-44d8-be67-14d146 e8ada0
Third party monitors are having some trouble with the new Macs. Mostly because of the mini-display ports on the newest Apple supplied cards, but there seem to be other issues as well. You can definitely expect to use the DVI port and leave the mini display for whatever Apple will force on us next.
Apples 24"? Well, it works fine for most but in Apples own description of the display it was made to connect laptops to.
Edit: I'm sorry, for video work? Most anything in the upper end is fine.
Message was edited by: Samsara

Best monitor for video editing?

Hi,
I have been saving up for a Mac for sometime now and have decided to buy the new Mac Pro when it comes out this December.
I understand that it doesn't come with a monitor so I have been looking into which one would be best to get. I have never had to buy a separate monitor before as I have always had an iMac so maybe there is one that is very popular that most people use that I don't know about. It would mostly be used for video editing on Final Cut and a little bit of Motion and then other general things like music, photos, documents etc.
Ideally 24" or 27" and under £400.

I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
John,
That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

Which of these would be the best iMac for video editing?

Hello, pretty simple question, which of these 2 iMac configurations would be best suited for video editing? I want to use Final Cut Pro X and Adobe After Effects (not cutting edge effects just simple stuff).
Option 1 - 21.5 inch
3.1GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
16GB 1600MHz DDR3 SDRAM - 2X8GB
1TB Fusion Drive
NVIDIA GeForce GT 750M 1GB GDDR5
Option 2 - 27 inch
3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz
8GB 1600MHz DDR3 SDRAM - 2X4GB
1TB Serial ATA Drive @ 7200 rpm
NVIDIA GeForce GTX 775M 2GB GDDR5
For some reason Apple don't offer more than 1GB of dedicated video ram in anything but the maxed out 27inch. Personally, I’m not fussed about the bigger screen and I would say that having the faster processor, double the ram and a fusion drive would be more beneficial than the extra gig in the video card but I’m not 100% sure, what do you guys think?
Thanks.

If you do a significant amount of video editing the larger display is nice but not absolutely necessary. I’d also recommend an SSD or Fusion drive rather than the stock mechanical drive which really is dog slow. If you choose an SSD 8GB will be plenty though 16GB is better if you go with the smaller model.

What is the best Monitor for Video editing & Graphic Design?

Hi every one,
I would like to find out what is the best monitor for video editing and graphic design that you recomend, I am trying to buy one but not sure which one is good and not expansive.
Thanks very much

I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
John,
That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

Best display profile for video editing

Similar Messages

Maybe you are looking for