Best dock for sound system

I'm looking for either a dock or a/v cable that will give me the best sound from a high-powered serious sound system, not a "micro" system. I've tried a Belkin audio cable connected to my headphone (audio out) jack but the sound is unacceptable. Is the Apple Universal dock or Apple AV connection kit the way to go or something else. I have a Denon receiver pumping out 7 x 110 watts per channel.

i think i have the same denon, it's a 3805. Don't have an answer to your question though.

Similar Messages

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • Best Practice for setting systems up in SMSY

    Good afternoon - I want to cleanup our SMSY information and I am looking for some best practice advice on this. We started with an ERP 6.0 dual-stack system. So I created a logical component Z_ECC under "SAP ERP" --> "SAP ECC Server" and I assigned all of my various instances (Dev, QA, Train, Prod) to this logical component. We then applied Enhancement Package 4 to these systems. I see under logical components there is an entry for "SAP ERP ENHANCE PACKAGE". Now that we are on EhP4, should I create a different logical component for my ERP 6.0 EhP4 systems? I see in logical components under "SAP ERP ENHANCE PACKAGE" there are entries for the different products that can be updated to EhP4, such as "ABAP Technology for ERP EHP4", "Central Applications", ... "Utilities/Waste&Recycl./Telco". If I am supposed to change the logical component to something based on EhP4, which should I choose?
    The reason that this is important is that when I go to Maintenance Optimizer, I need to ensure that my version information is correct so that I am presented with all of the available patches for the parts that I have installed.
    My Solution Manager system is 7.01 SPS 26. The ERP systems are ECC 6.0 EhP4 SPS 7.
    Any assistance is appreciated!
    Regards,
    Blair Towe

    Hello Blair,
    In this case you have to assign products EHP 4 for ERP 6 and SAP ERP 6 for your system in SMSY.
    You will then have 2 entries in SMSY, one under each product, the main instance for EHP 4 for ERP 6 must be central applications and the one for SAP ERP 6 is SAP ECC SERVER.
    This way your system should be correctly configured to use the MOPZ.
    Unfortunately I'm not aware of a guide explaining these details.
    Some times the System Landscape guide at service.sap.com/diagnostics can be very useful. See also note 987835.
    Hope it can help.
    Regards,
    Daniel.
    Edited by: Daniel Nicol on May 24, 2011 10:36 PM

  • Stand alone Airport Express for Sound system

    Hi
    Can I have an Airport Express on it's own connected to a sound system.
    I have a normal (Sky) Wireless router at home and no other Aplle networking.
    I want to be able to airplay music to my sound system and was told that an Airport express would allow me to do this.
    But, My iphone will not find it, My ipad will not find it and I can not connect through the utility.  I have tried so many things but can not make it work.
    Will it ever work?  Can I do this?  How?  Please help...
    Cheers
    Richard

    Can I have an Airport Express on it's own connected to a sound system.
    Yes. The AirPort Express Base Station (AX) can be configured to provide its own wireless network for the purpose of iTunes streaming. It does NOT require an Internet connection.
    The issue you would have is that you would need to switch wireless network between the goal of streaming vs. Internet access.
    To resolve this, you would just need to reconfigure the AX to "join" the Sky's wireless network so you do both simultaneously. (ref: AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless tab > Wireless Mode = Join a wireless network.)

  • Best IDE for slow system

    what is the good IDE with drag and drop interface for slow system running on P3 500mhz ,ram256

    I said relatively svelte. If Eclipse seemed slow, you'd shoot yourself in the head after trying to use TogetherSoft or TogetherJ or whatever the hell it's called. At one place I worked, where they wanted us all to use that IDE, I used to start the thing up, then leave to get a cup of coffee. I mean, I went downstairs, waited in line at the Starbucks, etc., and when I got back it still wasn't even finished starting up.
    Later I learned that they didn't even check what IDEs we were using, so I just used vi. I also tried using Eclipse and it ran OK but I prefer vi.
    I tend not to use IDEs much but when I've used Eclipse, it's always been pretty good, and it was never on the latest and greatest hardware.
    So try it, and if it doesn't seem fast enough, use something else. I suggest vi.

  • Solution for sound system problem (built-in speakers)?

    I have my macbook pro since 2012 and I never had a problem. I was listening to music on youtube this morning when the sound started to be not clear. It's like my built in speakers are not built in anymore and are far away from my mac. It's quite annoying because it's the same issue with all the software (Itunes, Skype....) Some has clue and can help me. Thanks in advance.

    1. System Preference > Sound  > Output > Internal Speakers
        Move the Volume slider a bit to right. If Mute is checked, uncheck it.
    2. Some sound settings are stored in PRAM. Reset PRAM.
        http://support.apple.com/kb/PH4405
    3. Reset SMC.
         http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Hope this helps.

  • Best practices for Project Systems

    Hello Experts,
    I am working from BI side to integrate Project systems to BI for reporting purposes.
    On the sdn, I have seen the term 'Best Practices guide'.
    1) What is this 'Best Practices mean'
    2) Where can we find it from
    3) How is that going to be useful if I am working from BI side.
    Kindly advise on above questions
    Regards
    Shanthi

    Hi
    Bc set is avilable on service market place you download this file and than you found the method and i am sending you a link its give you help This link is for  retail.
    http://help.sap.com/bp_retailv1500/Retail_IN/html/Retail_toc.htm
    http://help.sap.com/bp_retailv1500/Retail_IN/index.htm
    Reward point if helpful
    Thanks
    Pankaj Kumar
    Message was edited by:
            Pankaj Kumar

  • Best configuration for Transport System

    Hi everyone
    I like to know what is the best way to configure my transport system.
    We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
    We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
    Thks.

    Hello Emerson,
    You don't have Development system?
    In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
    Please read TMS configuration guide and take necessary actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Thanks,
    Siva Kumar

  • Keyboard Shortcut for Sound System Preferences

    Hi everyone -
    One of my favorite keyboard shortcuts on the Mac is "option + volume up" (or volume down) keys. This automatically opens system preferences and takes you to the sound preferences. I must use this at least a dozen times a day.
    I recently got a new (non Apple) keyboard, and while it does have option and volume keys, the above shortcut does not work. Does anyone know what key commands the computer receives to cause the sound preferences to open?
    I like to maybe use one of the softkeys on the keyboard to recreate this shortcut. Thanks! I've called Logitech and opened a case with a product specialist at Apple, but I figured I'd try here too.
    Thanks!

    never knew about this shortcut. pretty useful. I also have to access this pane very often to switch between sound output devices. this got very annoying and I found this freeware
    [Sound Source|http://www.rogueamoeba.com/freebies>
    try it out. it's even quicker than using your shortcut.

  • Best workflow for sound editing

    When I have finished working on a project in FCP and want to do some final tweaking to the sound mix, is it a better option to do that work in Soundtrack Pro or inside FCP?

    You have more options for mixing/cleanup/mastering in Soundtrack Pro than you do in FCP. Here's an example:
    http://www.youtube.com/watch?v=xFuqTYXkVik
    Cheers!
    ~Mike
    [Screwfilms.blogspot.com]
    Message was edited by: screwfilms

  • Best Slot for sound card

    Hello.I have a simple question about my sound card.
    I have Msi Z97 gaming 5 and Creative sound blaster z.My graphic card is N660 Gaming 2GD5/OC. I was wonder what is best PCI-X slot to add the card.
    In the upper place or down?

    personally I would use the upper x1 slot so the heat off the sound card isn't being pulled into the Graphics cards cooler increasing its temperature a little but that's just me.

  • What is the best tools for analyzer VoIP

    I need ur help, i looking the tool helps analyzer VoIP in WAN/TDM. What is the best tool for Cisco System or wich recommends.
    Thxs!

    Hey turbot,
    Thanks for contacting National Instruments support.  Each set of the vis you mention are the latest, and some use similar methods to do the FFT than the other.  The SMT is usually the best in most applications.  There is also another option in the case of scope, you can fetch FFT data from the driver.  The FFT is not actually implemented in hardware, but in the driver, and this is transparent to the user.  It's simpler to use, but not as efficient as the SMT.
    I hop this answers your questions.  Let me know if I can be of further help.
    Regards,
    Kenn North
    Senior Product Manager - Search, Product Data
    http://ni.com/search

  • Best tuner for Dv71248 vista 64 bit

    ok i have a few choices for you all if you have any better plz post
    http://reviews.cnet.com/4504-9332_7-0.html?id=3209​2266&id=33314746&id=32955918
    http://www.tigerdirect.ca/applications/searchtools​/item-details.asp?EdpNo=3296077&csid=_21
    http://h10084.www1.hp.com/canada/products/landing/​consumer-accessories/usb_tv_tuner.html
    so if you know witch is the best one for my system and will work well let me know 

    The below post should answer your question
    http://discussions.apple.com/message.jspa?messageID=5526734

  • Adjusting volume for rear speakers in a 5.1 surround sound system

    Hi,
    I have a basic Logitech X-540 5.1 sound system spakers. I am trying to point the rear speakers to where I'm sitting, but I cannot hear much from them except in certain songs or videos. I was wondering if there's any way that I can adjust the volume on the rear speakers so that I can hear them more?
    Thanks in advance.

    Songs are stereo, so use the best upmixing method.
    Notice the "1" for rear left & right - change that to e.g. 1.5, to be louder.

  • New sound system for ipod touch?

    Hey everyone,
    I am looking for suggestions for a new sound system for my iPod Touch. I am not sure which generation my iPod is, if anyone knows any way to find out I would appreciate the tip
    The sound system I have works ok, but when my iPod plays there is an annoying static issue. So I am looking for something that will dock my iPod, allow me to play my iPod touch without any static, and of course charge my iPod. I am looking to keep under 100 dollars. I welcome any and all suggestions as I am clueless and have a hard time figuring out which systems are good and which aren't. thank you

    Look on the back of your iPod Touch for one of these numbers.
    These numbers are directly from Apple.
    iPod Touch 1st generation - A1213
    iPod Touch 2nd generation - A1288
    iPod Touch 3rd generation - A1318
    iPod Touch 4th generation - A1367
    Let us know what generation you have.

Maybe you are looking for