Best driver for K7T Turbo2 version 5.0

I am looking to find out which version of the VIA drivers would be the best to use.
K7T Turbo2 Version 5.0 (MS-6330)
Windows XP Home Edition
THANKS!

The d bracket led was an optional thing along with a 6th isa slot.
I don't have either one.
Help Please.

Similar Messages

After replace the ATX case for K7T Turbo2 mainboard???

hi, Master outhere help plz...
after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
thank for kindly supports soon...

psu max amps better than in old case ?
got to many stand offs under the board shorting it out ?

Cisco Network 2009 - Best practices for migrating previous versions of cisco unified communications manager to cucm 7.1

Does anybody have a copy of the above referenced presentation that you could send me.
Thanks in advanced.
The presentation can be purchased at the following site:
http://www.scribd.com/doc/33211957/BRKVVT-2011-Best-Practices-for-Migrating-Previous-Versions-of-Cisco-Unified-Communications#archive
but felt I ask one of my peeps first.
Thanks in advanced.
Dennis

Hi Dennis,
Well..let's give this a try
Cheers!
Rob

Best Driver for GX630

Hello all, I apologize if this is a repeat of a previous topic;
I own a GX 630, and have had it for about a year, or more, now. I understand it isn't top of the line gaming, but I expect a certain amount of performance out of it.
Recently I've been having trouble with WoW and the game seems to run fine until the video card gets exceptionally loud for about 5-10 seconds, then performance drops to under 10 fps. The laptop seems to experience abnormal heating issues as well.
Before this happened I had been playing around with different drivers to see, pound for pound, what was the best driver for the laptop in terms of monitoring heat and giving suitable performance.
In short, which is the best driver out there, in your experience, for the GX630 32 bit?
Thanks so much.
Cheers!

You won't see it at the outtake, the dust is at the beginning of the exit.
Have a look at this, it will give an idea of what I mean: http://tech.icrontic.com/articles/clean_laptop_heatsink/
Don't do this yourself if you never opened a laptop!

Best driver for XFI Titanium

Hello I am new here and confused with all these driver options and differences with sound between Windows XP and Windows 7 as I've heard that from Vista Microsoft took away proper hardware support from these cards.
Please kindly can someone provide me the best driver for use for Creative XFI-Titanium PCIe sound card?
I need it to perform surround sound in headphones via CMSS-3D I think it is called.
Thank you very much.

`Thanks for replies.
So I have installed the?
SB X-Fi Titanium PCI-E Install Disc .0
from http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Titanium-PCI-E-Install-Disc--0-unofficial/td-p/556425
I am not sure what the difference between the support pack and this is to be honest. So I just installed this one as it comes with more updated software.
edit:
Sorry I forgot to mention that in device manager under sound controllers it lists
Creative SB X-Fi
Does this mean that my system is not properly recognised or doesn't it display the specifics such as Creative X-Fi Titanium for example? Thanks...

Best driver for MSI GF4MX440SE

What is the best driver for MSI GeForce4 MX440SE (MS-8847) ?
Is it Detonator 41.09 ?

shady86,
Your best bet is the latest DetonatorFX Drivers from the nVidia Website. They will be the most up to date drivers you can get.
Take Care,
Richard

Best driver for lion for canon mp530?

What is the best driver for lion for canon mp530? My scangear goes into rainbow-whirligig action when I try to scan.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp530#DriversAndSoftware

Newbie ? Are these settings normal for K7T Turbo2?

Greetings All,
First I would like to say I really enjoy this forum. I have learned much. Also I would like to say that I am fairly new at putting together systems so if my questions are basic please forgive me. Thanks for your patience and your willingness to teach. OK, here is my system and my questions:
K7T Turbo2 v.5
Duron 800
2 sticks 128meg = 256
PSU Sparkle 300w; 150w combined (according to sales slip)
Asus 7100 Geforce 2mx 32 meg
SB 128 pci sound card
Western D 80gig special
Acer 52x CD
LiteOn 48x12x48
Win 98se
Most curent VIA drivers
I think that about covers it.
The questions:
1) I have seen a lot of discussion about voltage seetings so I am wondering if mine are normal? They are as follows:
Vcore = 1.55v
5v = 5.05v
3.3v = 3.27v
12v = 11.60v
2) This may need to be in the BIOS group but what are the optimum seetings for this board and my stuff?
3) When I boot up I notice that just about all my hardware is using IRQ11. Is this normal?
4) A while back I saw a lot discussion about ACPI. Is it best to use it or not? If you turn it off do you have to reload your OS?
I think that about does it for now. Thanks again for your help.
Dave

Ian,
Not that I am very technical and do sometimes get mixed up in my own settings...
I got a canon A1 and use the easy set up for HV 1080i50 on interlaced footage
and 1080p25 for the '25f' footage. When using the de-interlaced filter I hit the
upper field and I am having a major headache from time to time with sequence
settings and field dominance in particular with interlaced footage but do experiment
quiet abit to my even larger frustration. I do find the '24f' frames quite pleasant to
look at - maybe it is just because it is easier to work with I dont know, but interlaced
got a reputation of being difficult.
Likewise as far as I am aware then the '25f' canon setting is as good as progressive
some will even say 'same'. check out more here
http://www.dvinfo.net/conf/forumdisplay.php?f=138
Henrik

Best driver for photosmart p-1100 on windows 7

HiWhta is the best driver to load to allow me to still use my older photosmart p-1100 printer with windows 7 ?

I was having this same issue and found a solution. I was thrilled when I upgraded to 7, until I found out that MANY drivers and applications are just not compatible. BUT....here's the loophole: you can set the program to run in Windows Vista compatibility
mode and it WILL work. To do this: 1) Download the driver utility (CS330.exe in this case) to your desktop. Note: I used the CS330 driver for Windows XP and am running 64 bit Windows 7 on my computer. 2) Right click on the icon and select "Restore Previous
Versions" 3) Select the "Compatibility" tab. 4) Check the box for "Compatibility Mode" and select "Windows Vista (Service pack 2) from the drop-down menu. 5) Click "Apply" and then "Ok" 6) Reboot your computer
and click on the icon to install. Follow instructions given on the screen. Hope this helps!
I tried this, doesn't want to find the driver in the c:/temp/cs330-xp dir

Best Driver for GeForce GTX 680MX

What's the best driver version number to use with the GTX680MX graphic chipset to use GPU acceleration without problems? (Win 7 64bit) Installed at the moment is 306.37 but the latest version is 320.49. I ask this question because I have seen Adobe refer to 311.50 as the latest recommended driver to use for the Quadro 4000 card (and other Nvidia cards). There is not a 311.50 available for the GTX 680MX. The version numbers start in the 310.xx range up to 320.xx
Does anyone know what Adobe recommend?

Using GTX 460, GTX 480, and GTX Titan cards, all of the 320.??? drivers are working fine for me for CS5, 6, and CC. (my testing has been from the older ones all the way up to the latest beta driver).
The only tip I would provide is to change one setting from the default:
- 3D Settings / Manage 3D settings / Power Management mode = Perfer max. performance (default is "Adaptive")
Bottom line, I suspect for a GTX 680 with premiere, the exact driver version does not matter too much.
Also, BTW, I only load the GTX driver using the custom install option; nVidia wants to add loads of additional stuff that simply is not required for Adobe.
Regards,
Jim

New BIOS for K7T Turbo2

I just downloaded the latest BIOS from your site (W6330VMS.360) and was planning on installing an Athlon XP 2600+ CPU. I was expecting to see a CPU multiplier of 16 available in the BIOS settings but it only goes up to 15. Can I still install a 2600+? What would the multiplier be?

Quote from: zillafan on 07-December-06, 21:41:20
I just downloaded the latest BIOS from your site (W6330VMS.360) and was planning on installing an Athlon XP 2600+ CPU. I was expecting to see a CPU multiplier of 16 available in the BIOS settings but it only goes up to 15. Can I still install a 2600+? What would the multiplier be?
Hello,
should be x16 Multi. i can't see manual selection for x16 multi too.
in BIOS description: -Support AMD XP 2400+ & 2600+ (K7T Turbo2 only)
i have checked inside and confirm that 2600+ ratting exist(323630302B@00009EA0)
i guess you should leave/setup "CPU Clock Ratio" to Default(not to override/force custom values), BIOS will ask CPU for his default multi by vid and should apply correct one.
think should be fine

Best Drive For "Disk Cache"

Hello Everyone.
By default, the After Effects Disk Cache is located somewhere in the "C Drive", Temp Folder.
Since all the applications are Installed In the "C Drive", Therefore, Is It better to use another Hard Drive for the temp folder or just leave It alone ?
Both my "C Drive", and my Other drive each have a 400 GB of Empty Space.
My Drives are not SSD Drive, just a regular Hard Drives.
Thanks.

Cache should be on a the fastest drive on your system that has a fair amount of free space. Simple as that. If your fastest drive is the same drive that contains the OS and there is a bunch of free space then that may be the best option. If you have other drives on your system that are as fast, then pick one of them. It's as simple as that. Cache needs room and speed before it needs to be on a separate drive.

Best Driver for MS SQL Server 2000

What is the best JDBC driver for use with kodo and SQL Server 2000. The
driver provided by Microsoft is terrible (no news there). I would
appreciate either recomendations from SolarMetric, or from people who have
had success with a SQL Server implementation.

We've used Sprinta and Opta from i-net Software
(http://www.inetsoftware.de/) and they're not bad.
Jeff Sheldon wrote:
What is the best JDBC driver for use with kodo and SQL Server 2000. The
driver provided by Microsoft is terrible (no news there). I would
appreciate either recomendations from SolarMetric, or from people who have
had success with a SQL Server implementation.

Best driver for T61p atheros wireless a/b/g card?

Hey guys I was wondering what model the card was and what the best driver was or which driver had the most tweaking options? The driver works fine on Win7 x64 but I've got other laptops that have way better range. Thanks

Hi:
Below is the link to your service manual.
Supported cards with corresponding part numbers can be found in Chapter 3. Removal and replacement procedures can be found in Chapter 4. It is a relatively easy procedure--the most difficult part is attaching the tiny antenna leads to the card connectors--and it isn't that difficult. If I can do it, you can do it.
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Since your notebook specs state you have an Intel processor/chipset, you are in luck that you can install the
Intel Centrino Advanced-N 6230 Part # 631956-001 WLAN card.
Here are the specs on that card from Intel:
http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6230.html
Now, this is very important...You MUST get the Intel Centrino Advanced-N 6230 card WITH the HP part # on it. No exceptions. So, do your search for a vendor (if you don't want to get it from HP) by the part number.
If you do not follow the above guidance and buy just any old centrino 6230, your computer will not boot until you remove the unsupported card.
Wireless cards have to be tested and validated with the antenna system in the notebook in order to comply with the wireless communication regulations established for many countries--in the USA, the FCC for example.
HP ensures compliance with these regulations by locking out any wireless cards that were not tested and validated to work with the antenna system installed in the notebook. Needless to say, HP is only going to test a few cards for each model notebook.
Here are the USA FCC guidelines regarding this matter, if you are interested.
http://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=22884
If you want to buy it straight from HP, it is available for $41.52 + tax and shipping, I presume.
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=E5D285861AF644AF837A5224E8794A99&Searc...
Paul

What's the best driver for an Epson Stylus Photo R260 printer?

After the last couple of driver updates for Mavericks, my printer won't print just black although it is using the black ink to shade colors darker. I previously used another driver but didn't buy it after the trail period was up but now I'm getting desperate. Unfortunately, I can't remember that driver's name. Does anyone have a suggestion for a driver for an epson stylus photo r260 inkjet?

How are you trying to set the print to just black? Are you setting the color to Grayscale under Print Settings in the Print window?
Should be the same for the 260 as the 280.

Best driver for K7T Turbo2 version 5.0

Similar Messages

Maybe you are looking for