Best DSL modem/router?

I'm sure this question has been asked but how recently, I wouldn't know. We have a D-Link DSL modem/router sent to us by Verizon in 2010. My desktop Mac is connected via Ethernet to the modem. Our other devices use Internet via WiFi. Verizon can sell us a new basic modem, of course. But I'd like one that has a stronger WiFi signal. Can anyone suggest a specific brand and model that will work with our DSL and emit a stronger signal? Thank you!

sherylsrtx wrote:
I'm sure this question has been asked but how recently, I wouldn't know. We have a D-Link DSL modem/router sent to us by Verizon in 2010. My desktop Mac is connected via Ethernet to the modem. Our other devices use Internet via WiFi. Verizon can sell us a new basic modem, of course. But I'd like one that has a stronger WiFi signal. Can anyone suggest a specific brand and model that will work with our DSL and emit a stronger signal? Thank you!
get your own router/wap and connect it to the modem.

Similar Messages

DSL Modem / Router for Airport Extreme / Express

Please can anyone advise re the best DSL Modem / Router to use with an Airport Extreme and Express.
I am in the UK with BT Broadband. I currently have a Netgear DG834G which has been great but seems to need a lot of re-setting recently and has been dropping the connection. I've checked our line with the provider and that seems to be OK. The Netgear DG834G is currently wired via CAT5 to my Airport Extreme which is then also wired to an Airport Express to extend the network.
We are in a rural area so don't have particularly fast Broadband speeds (max tends to be around 4MBps).
As I'm using the Airport Express / Airport Extreme for my WiFi I don't necessarily need a modem / router with wireless or anything that has bells and whistles or can make me a decaf macchiato...I just want something this is bomb-proof and super reliable.
I've looked at various forums and am just getting confusing stuff re what works and what doesn't.
We are due to get fibre-broadband in our area next year - very happy to have to get a new router then for that if needed. The important thing for me is to have a decent set-up for now.
Many thanks! Eddy
Using Macbook Pro and iMac on 10.9.5

You don't need a modem/router since the AirPort Extreme is a router.
I don't know what the best modem might be....that would involve testing hundreds of products, and even if we could come up with a "best" modem for the AirPorts, it would likely not be the "best" working the BT connection, or BT would not support the product......,but you might want to take a look at the Draytek Vigor 120 modem, and then check with both the Draytek support folks and the BT support folks to make sure that the modem will be compatible with your service.
Vigor 120 ADSL Modem - Draytek
If you are due to get a fibre connection in the future, then you will have to start over again modem wise at that time.

What is the best dsl modem to use with the Airport Extreme for AT

I'm looking for the best dsl modem to use with AT&T service. I'm not really interested in their equipment. I have the newest model of the AE.
Thanks

I'm looking for the best dsl modem to use with AT&T service
I have no idea if the Motorola 2210 is the "best" device to use, but it has been flawless in 5+ years of operation.
I believe that there is a new version of the is product, now called the 3360. I normally switch modems after about 5 years of use and will use the 3360 in the near future.
This support article from AT&T provides some valuable information about how to configure a router using a modem:
http://www.att.com/esupport/article.jsp?sid=KB401764&cv=801,902&title=Connecting +a+non-AT%26T+provided+router+to+your+AT%26T+Internet+connection#fbid=psQd4wvHtu P

WiFi Problems w/ OS X 10.4.11 and Speedport W 502V DSL Modem/Router

We just moved to Germany again, so went to Deutsche Telekom (DT) for Internet/phone access. They sold us a Speedport W 502V DSL Modem/Router with manuals--all in German, as DT does (DT offers NO support in English; some would argue they offer no customer support at all).
Babelfish and I managed to configure a late-model eMac, G4 PowerBook and two iPhones with the DSL router, with pretty good success (sometimes we have intermittent Internet connectivity). Then our household goods were delivered and we unpacked and set up the G4 dual-GHz tower. So...the G4's Airport (not Airport Extreme) "sees" the WLAN and the https://speedport.ip site "sees" the IP address of the G4, but the G4 can't join the network, no matter what I try. It's to the point that I think it's something painfully obvious that I'm missing and I must be too far in the weeds...so now I need fresh eyes on the problem.
I have no computer connected to the Speedport, and wouldn't have thought that was the problem because the other non-physically-connected computers are using the WLAN network. Thanks for any help!

hi kathryn
did it have to be the Telekom, by all means??
anyway, first of all a link to a video where a german comedian writes a letter to steve jobs demanding he chose any carrier but the DTAG for the iPhone distribution in germany - really funny!
http://bit.ly/4B4OdQ
OK, I´m currently downloading the speedport manual from their website and will look through it, in order to see if there´s something in there..
as a first guess I´d try looking at the wireless prefs of that speedport box. I guess it supports by default 802.11a/b/g, whereas the G4 only does 802.11b (the "normal" airport). Try selecting only the 802.11b portion from the speedport (that makes networking somewhat slower for airport express computers, but shoudn´t be a problem since it´s still at least as fast as basic DSL service (11MBit vs 2 or 6 MBit)
cheers
Matt
(german in spain)

Airport Expess with DSL Modem Router

I had a DSL Modem Router with 3 computers plugged into it via ethernet and was working fine. I then replaced one of my computers with a laptop so bought an AE and plugged it into an ethernet port on the DSL modem router. It worked fine for about 4 days then all three computers internet connections went down. I have got the two desktops working again with the AE disconnected but am worried that if i connect the AE again the same thing will happen. Is there any way that i can avoid this from happening? is this because i am doubling up the routing if you know what i mean?
MacBook Pro 17" Mac OS X (10.4.7)

First welcome to the discussions,
This isn't that uncommon, many of us expieriance drops in service and have to reset our systems.
There could be any number of reasons that cause this from a Power Spike to surges from power company, to storms from wind and lighting.
If you are lucky nothing gets fried and a simple reset will take care of the problem. Other times it can fry about any component and sometimes it's hard to find exqactly what is fried. If you are able to reset and get everything up and running again I wouldn't worry to much, I would consider a Battery Back-up to add to your Network to save your equipment though.
Cheers and Good Luck.
Don

Can Westell 327W DSL modem/router receive wireless signal?

I have a spare Westell 327W wired/wireless DSL modem/router. I need a wireless access point for a G4 Power Mac away from an Apple Extreme. I knew how to make the Westell 327W in a bridge mode. Is there a way to make 327W communicate wirelessly with a FIOs modem/router?
Thank you very much.
Robert

Hmmm, perhaps something like this with a USB extension cord would be a solution, they have better Range even without an extension than Airport cards ime...
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10303&Item=NWTMXP802NU2C

Best wireless modem/router for Comcast internet service?

Hello!
I am looking to switch internet service from Verizon DSL to Comcast. I have a MacBook Pro using Airport Extreme (supports 802.11 a/b/g/n), and my other computer is an iMac (OS 10.5.8, iMac 6,1), with a printer and a Roku box (I'm also thinking about switching to Apple TV). All are currently set-up wirelessly with a combined modem/router.
I know that there is a list of a bunch of potentials on the Comcast website, but I'm looking for real experience from Mac users. Good, bad or neutral comments are appreciated.
Thank you!
Ken

Don't pay Comcast monthly for a router. Buy a router. A router is a router, the best routers are Cisco based rackmount devices. Honestly the AirPort Express and Extreme are amazing and work quite well with Apple products. Plus if you purchase one and get AppleCare on it you get AWESOME support from your friendly AppleCare advisors... sure as **** beats going to India and talking to Fred.

Best cable modem & router combined?

I have the Motorola Surfboard SBG900, but was wondering if there are newer (and better) combo cable modem/wireless routers now available.
Also, is cable still much faster than DSL, and, if not, are there good combined modem/routers for DSL?
Thanks.

We might be able to give you an opinion on a "best" modem, but it would be of no use to you if your Internet Service Provider did not support that model.....so you had no help when....not if....you have a problem.
Instead, please check the list of supported modems that your Internet Service Provider (ISP) likely has on their website and post back with those models.
Then, users might have some feedback for you on the upsides and downsides of the particular modem model they are using.
Alternately, if you could tell us which ISP you are using, that might help expedite things.
Finally, please designate whether you are looking for a simple modem.....or a modem/router or gateway combination device.

How to configure WRT350N as a router in a network wih a DSL modem/router

Hi,
I'll really appreciate if somebody please could give me some help.
The problem is that I have a Dlink DSL-2640B modem/router AND a Linksys WRT350N router, what I want to do is how to configure them so they both are in the same network, and the WRT350N has access to internet and the computers connected to the DSL-2640B.
Is that possible?....OR...the other option I was thinking was leave the DSL-2640B as a modem only, and have the WRT350 make all the routing wired and wireless.
I'll really appreciate your comments.
Regards.

As per my knowledge it is better to use the wireless router to provide connection to wired & wireless computers. Leave the DSL2640B as a modem, connected to internet port on wireless router.

WRT54G & Westell DSL Modem/Router

I want to use the WRT54G as a WAP or signal repeater to extend the range of my Westell 327W DSL modem/wireless router. Is there a way to do that? I'd like to put it halfway between my wireless router and another wireless computer in my house.
Message Edited by rweintra on 08-08-2007 05:13 AM

That router can not be used as a repeater. You can turn it into a wireless access point but it will not repeat the signal from another wireless router with the linksys firmware. You can try to look for a third party firmware that may give you that option but if you do install a third party firmware it will void any warrenty you have on that router.
Check this LINK for other firmware.
Richard Aichner (Ikester)

Install RVS4000 with DSL modem / router combo?

I'm trying to install a RVS4000 VPN router in our small office. My problem is that AT&T has installed a Netopia 3347-02 DSL combination Modem / router. So I can't connect the RVS4000 directly to a dsl modem, the only access I have is on the Lan side of the Netopia. When I tried to set the WAN side of the RVS4000 to the same subnet as our Lan, it wouldn't let me do that. I tried setting the Lan side of the Netopia and the Wan side of the RVS4000 to (the same) slightly different subnet, but that didn't work either. The only way I can get internet access going through both devices is to connect the Lan side of the Netopia to the Lan side of the RVS4000, but that bypasses the VPN, correct? The reason I bought the RVS4000 is for the VPN. Is there a way to configure the RVS4000 in this situation, or do I need to get a plain old DSL modem without a built in router?
Thanks, Scott

Scott,
You should not need to get another device to use the VPN functions of the RVS4000. To setup the equipment you have, you just need to place the Netopia DSL router into "bridge" mode. This will then allow you to connect the DSL router to WAN (internet) port on your RVS4000. Once in bridge mode, your WAN port on the RVS4000 will receive its IP address from AT&T, which will then take over all routing functions, and enable you to use the VPN feature of this router.
If your DSL provider is using PPPoE, you will need to select "PPPoE" on the WAN setup page of the RVS4000, then enter the username and password into the RVS4000 so that it can authenticate and get an IP address from AT&T.
To place the Netopia DSL router into "bridge" mode, I am including a link to one of their user guides. The section for placing it in bridge mode starts on page 107.
http://www.netopia.com/support/hardware/SoftwareUserGuideV761-Clsc.pdf
Thank you,
Darren

IChat Tiger 3.1.4 (v432) resets my DSL modem/router

iChat has always worked untill one month ago on old speedtouch home. Frequent disconnects in the middle of a video conference. Now I have ne new modem/router form my provider, Speedtouch 546, and have internet connection. iChat can start up and connect to the net, see my buddies but can never initiate or accept a video conference. I click "accept" but it reports as if I have declined the invitation. Then ALL lights on my modem turn off, and it will reboot itself.
I have looked at Ralph's pages and opened my mac OS X firewall and have opened the port on my speedtouch in the NAPT section.
But...no way of testing if it works.

Hi Aram,
Welcome to the Apple Discussions
Alcatel Speedtouch 500 series have SIP, a protocol iChat and VoIP devices and apps use, bound to port 5060.
In earlier devices that have version 4.x.x firmware this can be unbound. See here in the white text box a bit further down the page http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_text
Now later devices (normally ending in 6) or those others that have version 5 or 6 firmware can not unbind SIP from port 5060.
The one solution that has been foound has been to put the device in Bridge mode.
11:52 PM Thursday; June 22, 2006

What's the best DSL modem to go with my EA6500 ?

Hi All,
I'm showing my ignorance around modems and routers here but here we go...
I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.
What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?
My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?
Any suggestions on what type/brand/speed of modem I should consider most appreciated...
thanks
Tony

Cisco does not have a plain DSL modem but they do have an ADSL gateway (modem/router) with model number: X3000. There is no such thing as a gigabit internet speed offered by an ISP (not that I’ve known of) but this gateway has a gigabit port which means that the modem is capable of supporting adapters with gigabit link/card speed. To know more about that gateway then check on the link below.
Getting to know the Linksys X3000 Linksys X3000 product features and specifications

Link an 871 router/switch wirelessly to an ISP-provided DSL modem//router?

Hi, Upstairs we have a 20-Mbps ISP-provided DSL wireless modem/router, and one floor lower, in basement, I would like to install a refurbished 871 Cisco router, without adding a separate Internet connection. I would like the 871 to connect wirelessly to the DSL router. To the 871 I would wirelessly connect 2 workstations, one of which will host 3-4 virtual machines. The 2 main reasons for this weird arrangement are so my virtual machines and virtual switch do not interfere with upstairs devices connected to the DSL router, and so I can practice Cisco router//switch configuration downstairs where I reside, without added expense of a separate Internet connection. Would I need a separate repeater between the two routers? Humbly requesting any other feedback.
Jeff

To have all routers using the same Network Name and wireless password, you would have to configure them for a roaming network. This would require that the Extreme and Express connect individually back to the Pirelli router via an Ethernet connection.

RV120 Bridged with DSL modem/router

Hello,
I am working overseas for a small company, trying to get an RV120 VPN router to connect to our network back home. Part of the problem is that I have to use a DSL modem here which is also a router, and so the WAN IP given to the modem is not the same one used by the VPN router.
Do we need to create a bridge between the two routers so that the VPN router can use the WAN IP from the ISP instead of a DHCP address on the local network? Or is this the wrong approach?
Any assistance is appreciated. I am a software engineer, not a networking/IT person so most of this is unfamiliar to me.
Thanks,
Dan

The DSL router does have VLAN capabilities, would that help? I briefly tried the DMZ solution, but didn't seem to make any progress. So when using the DMZ, would the VPN router still have an IP relative to the DSL router (10.1.1.x, etc. in this case, if the DSL router is 10.1.1.1), or should it try to takeover the actual WAN IP that the router uses?
Thanks

Best DSL modem/router?

Similar Messages

Maybe you are looking for