Best export settings for slide show

I created a 3 page slide show in photoshop that I would like to burn to a DVD. The slides include copy, photos and a few logos. They look beautiful in photoshop. I've tried importing them to Final Cut Pro in order to add music and some transitions, but when I export to compressor or quicktime and burn to a DVD using Toast, everything is really fuzzy, even on my HD TV.
So I thought maybe I should do this in Motion. I exported to quicktime and used the animation codec and it looks fantastic in QT but loses some quality when I burn it to a DVD in toast.
Is my problem with Motion or Toast? And is this the way to go about it? I know FCP way better than Motion and would like to stay there. Is it possible to get the same results in FCP?

Tommyjamg wrote:
Basically I created a "powerpoint" presentation in photoshop, a series of photos with copy, etc.
I imported those slides into FCP and added transitions between slides, had some photos fade
in/out, nothing spectacular.
You left out the critical information: what size is the sequence?
Tommyjamg wrote:
And from what I've read on this post, it won't matter how I send it to compressor or qt, it will only
look as good as the DVD lets it because it's SD. Although that doesn't make sense to me because
I've had good luck sending movies I've made in FCP to a DVD and the video, as well as the titles
look pretty good.
Could be but your other movies were probably created using more DVD-friendly sequence settings and codecs.
Tommyjamg wrote:
What is the difference between a DVD and a DVD-ROM?
ROM is read-only-memory. It's just a disk with some files on it. DVD is a tightly spec'd MPEG2 video format.
bogiesan

Similar Messages

  • What are the best export settings for a HD video in Premier Pro CS4?

    Hi!
       I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
    FPS 23.98
    1920 x 1080, then a few lines down it says 1408 x 792
    16 bit,
    2 channels
    48000 Hz
       What should the settings be when I make a new sequence?
                 When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
    But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
    I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
    Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
    I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
    What are the best sequence settings for HD video?
    What are the best export settings for HD without loosing any quality?
    What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
    Thank You!
    http://forums.adobe.com/thread/713070
    On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

    It Stands for "Coder Decoder."
    Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
    This might be a bad analogy but I'll give it a try.
    A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
    In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
    Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
    I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
    Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
    I posted the link before but here it is:
    http://goo.gl/8GZq4i

  • Best export settings for video for web

    Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

    For now, it would be on my own website or a clients website. But there may
    be another possibility, I have a client that already has some videos
    available for viewing on their website, looks like they are YouTube videos
    that play on their site, and there is an option to "Watch on YouTube". So I
    guess I would love some recommended export settings for a straightforward
    video clip on my website, and if I need to explore the YouTube preset in
    Premiere, let me know. Thank you, I really appreciate your answers and
    help!!

  • Best export settings for HD video playback on computer?

    I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
    Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
    I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

    You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
    The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
    Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

  • Best export settings for dvd

    Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

    >require this much memory
    Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
    Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
    My 3 hard drives for video editing are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
    2 - 320Gig data for Win7 paging swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folders and files
    3 - 1Terabyte data for all video files... input & output files (1)
    (1) for faster input/output with 4 drives
    - use drive 3 for all source files
    - use drive 4 for all output files
    (2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
    Search Microsoft to find out how to redirect your Windows paging swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    Drive C space http://forums.adobe.com/thread/1007934?tstart=0

  • Best export settings for DNxHD?

    Hey guys,
    I'm working with R3D files (4KHD) in CS6 and need to export them for grading/editing in DNxHD at 1080p. Any tips on the best export settings for this?
    Also - is it necessary to downconvert the 4KHD in some way to 1080p before the export process? The files I'm ending up with are a noticeably poorer quality than the original; I'm not sure if this is due to an error I've made during the conversion or if its a natural part of using the codec?
    Thanks if you can help!

    For now, it would be on my own website or a clients website. But there may
    be another possibility, I have a client that already has some videos
    available for viewing on their website, looks like they are YouTube videos
    that play on their site, and there is an option to "Watch on YouTube". So I
    guess I would love some recommended export settings for a straightforward
    video clip on my website, and if I need to explore the YouTube preset in
    Premiere, let me know. Thank you, I really appreciate your answers and
    help!!

  • What is the best export settings for mini DV?

    Hi folks,
    Love this forum, it has been a huge help for a novice.  I am looking for answers to a more tailored question.  I believe this will help others too!
    What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
    1. archive an exact duplicate without any quality loss of an imported mini DV tape.  My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
    2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
    I really appreciate you reading and considering response.

    First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
    2nd, read below for a "trick" that is required to export to tape
    Export to Tape http://forums.adobe.com/message/4699448
    Hardware MPE must be OFF to be able to export via Firewire
    http://forums.adobe.com/thread/902499
    http://forums.adobe.com/thread/880824
    Also CS6 http://forums.adobe.com/thread/1016269

  • Best Export Settings For Fast/Low-Res QuickTime Movies

    I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
    Hello,
    I really could use some help with my export settings using FinalCut Pro 7.  Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc.   But now I am trying export a lengthy project at 53 minutes.
    The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
    This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed.  As far as what I’ve tried - I am using the H.264 codec.   I tried lowering it to NTSC 720x480, then tried 1280x720 HD.  I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000.  My audio is set at AAC.
    It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline.  I'm getting a bit nervous because of how many hours it’s taking to export.  The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
    NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
    I could really use could some wisdom today!
    Thanks so much to whomever can steer me in the right path.
    `Patrick
    Message was edited by: prepstein

    Try here
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Best export settings for tv slideshow

    what are the absolute BEST export settings to use when creating a slideshow to be played on a tv? additionally, i have used images with text & photos imported from illustrator.
    i want slides to be of the highest quality, along with text that DOES NOT have a halo around it..

    You can't ask for the 'absolute best' and then quality it.  The absolute best is something lossless, but those files rarely play on anything but a computer.  So you need something that plays on the TV, which isn't likely to be the absolute best.  But...chances are it will be plenty good enough.
    Use the H.264 format with the Match Source - High bitrate preset.

  • Best export settings for Kiosk type presentation.

    I have 24 slides that I would like to begin playing automatically and loop. 
    What is the best export settings in Quicktime.... manual? or would that require a click? 
    I have set all the transition in and out timings on each slide.
    Thank you.

    For now, it would be on my own website or a clients website. But there may
    be another possibility, I have a client that already has some videos
    available for viewing on their website, looks like they are YouTube videos
    that play on their site, and there is an option to "Watch on YouTube". So I
    guess I would love some recommended export settings for a straightforward
    video clip on my website, and if I need to explore the YouTube preset in
    Premiere, let me know. Thank you, I really appreciate your answers and
    help!!

  • Best export settings for Flash

    Hello,
    I am trying to export a video to Flash for uploading to the web. I am using Sorenson Squeeze to convert the file to Flash. What is the best export settings in FCP for this. I don't want to encode the file twice.
    Thanks in advance.
    Pete

    What format is your original material and what format is your sequence? Generally speaking, export with sequence settings. This will not add any additional compression.

  • Best export settings for transfering movie to  Flashcard for beamer

    Hi,
    I just finished a dv-project destined to be project thru Sanyo PRO xtraX Mulitverse projector.
    I've been asked to transfer the movie to a 30mb/s CompactFlash Extreme III card.
    Does any know what would be the best export settings/format to use?
    Maybe some other useful tips regarding the process.
    The project is due tomorrow and I still haven't a clue how to go about this
    Thanks very much in advance.
    Kind regards,
    Hans.

    Hans Anders wrote:
    .. to be project thru Sanyo PRO xtraX Mulitverse projector.
    please provide an URL which lists the technical specification of this specific device..
    (googleing here for minutes, tons of sales, on the sanyo website I'm lost and doesn't list it.. )

  • What are the best export settings for TV?

    I'm making a video that i would like to have on TV and would most likely go through iDVD, i have a Panasonic mini-dv camcorder and all my footage is in 4:3. What would be the best export settings to accomplish this?
    thanks,
    rob

    From FCE, export a QuickTime Movie (do not use QT Conversion). If you'll create the DVD on the same machine, leave the "Make Movie Self-Contained" box unchecked for a quicker export. Drag the resulting QuickTime file into iDVD.

  • Best export settings for playback on a PC

    What are the best export settings to playback a HD video from a local HDD on a fast PC?
    Original footage is H.264 1920x1080 25P from a DSLR.

    After searching and searching, I did many many exports and came to this conclusion:
    Video Production Blog: Best Export Settings:
    http://goo.gl/8GZq4i

  • Settings for slide show?  Export?

    I am putting together a 250 photo slide show in FCE 4. I exported TIF and JPEG files from iPhoto and imported in FCE. My slides look good when played on the browser. My exports, however, do not look good. What might I be doing wrong?
    Quicktime export has washed out colors that are vastly inferior to the browse in FCE. Dimensions, however, are fine (16x9). There are also a few pauses and/or hiccups in the Quicktime playback.
    Apple TV export is squished. It looks like output was compressed to fit 4:3. Colors are also washed out.
    Easyset-up set for 1080i50

    I remember a podcast tutorial that says that you should always save your photo files as .tif file (or PICT/TARGA) if you plan on showing it on TV. What you see on your computer screen will not always "look" the same on TV. JPG has somekind of compression that will show up less than stellar on TV where as .tif will not. Also, TV doesn't have the dynamic range to show all the colors and details as would a computer screen. If there are extreme highlights/shadows on your photos then some photos will look washed out or underexposed on TV.

Maybe you are looking for

  • Certain Keys on Keyboard No Longer Work

    Hello, As of a few minutes ago, my standard wired Mac Keyboard appears to be malfunctioning. The Tab and Caps Lock keys no longer work, and certain combinations of keys, such as alt-apple-esc, to bring up the force quit menu is no longer working eith

  • InfoSpoke Delta

    Hi Experts, I Created 1 Infospoke with "database table" and unchecked "Technical key" and update mode is "Delta". data comeing from the ods and upadted in infospoke database table. But when say extract data is not updating in table with delta, when c

  • HELP NEEDED ASAP! My iPod mini won't start up or charge

    My mini which i purchased about a little over a year ago, won't start up. When i restart (menu+select), apple logo comes up for 3 seconds, and it dissapears with small "click" noise, and mini repeats this forever. When i shift hold button on and off,

  • JCO call to RFC returns incorrect value

    Hello Experts, I am using JCO to call an RFC from java. One of the returned fields is a timestamp. When I invoke the RFC from within the SAP system, I get a correct timestamp value. But, when I invoke the RFC using JCO, the timestamp value returned h

  • AE CC - saving projects takes much longer than in CS6

    I've noticed that After Effects CC takes much longer to save my current project than previously (about 2-3 minutes). I'm used to saving quite often so this is slowing down my workflow. The project was imported from AE CS6. I've tried starting a new p