Best fan for this heat sink?

best fan for this heat sink?
http://www.newegg.com/app/ViewProductDesc.asp?description=35-109-118&depa=0
ty in advanced

Snakexor,
Hard to tell.
It really depends on your tolerance to noise and/or your goals - OC, pimped out rig, etc.
I usually prefer something on the silent side. SilenX were good for me, pretty quiet. I have XP90 though, XP-120 doesn't fit neo2.
Check out these guys:
http://heatsinkfactory.com/cgi-bin/HFAstore.pl?user_action=detail&catalogno=HS-004
They usually know what they are talking about. There are 3 fans suggested with XP-120 there.
Hope this helps.....

Similar Messages

TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
Re 1) you need to answer Kappy's questions.
Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
Do you not have a backup of the photo files?

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

WhatÃÂ¢ÃÂÃÂs the best practice for this scenario?

Hi,
My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
View.setWhereClause(...);
View.setOrderByClause(...);
View.executeQuery();
This works good when only one user working with the application but faced low performance when more than one user working with the application.
What are the points to increase the performance and what is the best practice for this scenario?
Thanks for your help in advance.

Sung,
I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
what do you think.
Thanks in advance for your comments.

H.264 What is the best use for this? H.264 Pros & Cons?

I wanted to know since I am using DV what if any role can H.264 play in my workflow? What are the intended or best uses for this? What are H.264 pros and cons? Will it produce higher quality than DV?
As always thanks in advance for reading and replying to my post,
Sebastian

It will not make DV look better, it is a MPEG4 based compression format for material to be delivered over the web. As such, encoding your material to it it is the last step in the editing process.
x

HT3819 I want to send my itunes library from my old macbook (start up disk nearly full) to my new iMac then delete my itunes library from my old macbook. Is Homesharing my best choice for this?

I want to send my itunes library from my old macbook (start up disk nearly full) to my new iMac. Then delete my itunes library from my old macbook. Is Homesharing my best choice for this?
What I don't want to happen is once I delete my itunes library from my old Macbook that the iMac itunes library to delete itself because I am using Homesharing. Does homesharing sync and make that happen?

Here is some help.
https://discussions.apple.com/thread/3849933
After confirming that all your stuff is on the drive, delete the photos you have copied. You will need to empty the iPhototrash to free up the space.

Is RMI best choice for this?

Hello!
I have some experience using the .NET Remoting with VB. I have understood that Java RMI is Java equivalent to .NET Remoting?
I'd like to serialize my objects and transfer them between the server and the client in internet.
I have red some opinions saying that RMI is good for intranet but does have major latency and scalability issues when it comes to internet.
Is the Java RMI best solution for this? What are the other techniques available with Java?
- Jarno Kiviaho

OK: You want to use RMI to connect an outside-the-firewall web server to a behind-the-firewall business logic server.
This is probably not too bad.
There are a couple ways that you can go.
1. Use RMI with HTTP tunnelling. I've never dealt with this, but you can probably find more about this searching this forum.
2. If you can get some ports opened for you in the firewall, then you can use the RMI transport and skip the HTTP stuff.
In the latter case, you
o Need to talk your firewall folks into opening two ports for you - one for a registry listener, the other for actual remote procedure calls.
o You need to make sure that your RMI server is designed to operate through one fixed port, rather than using random port numbers. Take a look back through this forum and again, you'll find people who have done this. (I did an implementation by providing my own SocketFactory, but I believe RMI has been improved since then so that the server can simply ask for the socket numer it wants.)

Design Patterns, best approach for this app

Hi all,
i am starting with design patterns, and i would like to hear your opinion on what would be the best approach for this app.
this is basically an app for data monitoring, analysis and logging (voltage, temperature & vibration)
i am using 3 devices for N channels (NI 9211A, NI 9215A, NI PXI 4472) all running at different rates. asynchronous.
and signals are being processed and monitored for logging at a rate specified by the user and in realtime also.
individual devices can be initialized or stopped at any time
basically i'm using 5 loops.
*1.- GUI: Stop App, Reload Plot Names (Event handling)
*2.- Chart & Log: Monitors Data and Start/Stop log data at a specified time in the GUI (State Machine)
*3.- Temperature DAQ monitoring @ 3 S/s (State Machine) NI 9211A
*4.- Voltage DAQ monitoring and scaling @ 1K kS/s (State Machine) NI 9215A
*5.- Vibration DAQ monitoring and Analysis @ 25.6 kS/s (State Machine) NI PXI 4472
i have attached the files for review, thanks in advance for taking the time.
Attachments:
V-T-G Monitor_Logger.llb ‏355 KB

mundo wrote:
thanks Will for your response,
so, basically i could apply a producer/consummer architecture for just the Vibration analysis loop? or all data being collected by the Monitor/Logger loop?
is it ok having individual loops for every DAQ device as is shown?
thanks.
You could use the producer/consumer architecture to split the areas where you are doing both the data collection and teh analysis in the same state machine. If one of these processes is not time critical or the data rate is slow enough you could leave it in a single state machine. I admit that I didn't look through your code but based purely on the descriptions above I would imagine that you could change the three collection state machines to use a producer/consumer architecture. I would leave your UI processing in its own loop as well as the logging process. If this logging is time critical you may want to split that as well.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Best methods for this project

Hi
I have this to create for a client.
http://www.qwerty-design.co.uk/bensons/
If you click on the London area (bottom right if you're not from the UK) and click the map will zoom to reveal two markers. When these are rollover they reveal store names.
Can I ask:
1. I have 130 stores to show all over the country, what would be the best way of feeding the text into flash? would it be to use XML or just an external text file for each store?
2. I am currently using a invisible button to create the click for the zoom, is this the way you guys would do this?
Can you recommend any other tips for creating this.
Thanks
Ricky55

Not that you asked for this advice, but that is what you get when you post for free help! Please take it in the sense of friendly critique that I mean it.
As the pins fade in I can see the "steel" through the red ball at top. Because you are using and alpha fade the red ball's alpha is partial and the artwork shows through. Not a biggie, but to me it looks unprofessional and clunky.
And I agree that XML will be the way to go if it is something that needs to be updated even a few times.

Best approach for this problem

Hi there Experts,
I have an Async Sync Bridge BPM, to go from Delivery Idocs to Webservice Calls, after that i map the response to a an ALEAUD Idoc structure and i send it back to erp to update the Delivery Status.
Currently its working as intended on production system, but the Deliveries quantity is growing exponentially, raising the response times for the whole process.
I found a solution for this problem, instead of making 1 Webservice call for each delivery, i can group those deliveries and send multiple deliveries per each webservice call, the problem i have appears when i need to map this response to single ALEAUD Idocs.
To Update the original delivery Idoc i need that idoc number onto the ALEAUD, but the webservice returns the response based on delivery number, therefore i need a mechanism, maybe a temporal table or something, that allows me to store the idoc number with the matching delivery number so i can use it as reference to map the huge response to single ALEAUD Idocs, also i'd like to know if this is possible to achieve using graphical mapping or wich would be the best way to do it.
Thanks for all the input on the matter,
Regards,
Roberto.

Maybe you can write 2 RFC function modules to maintain values in ECC and the other to read it. These RFC's can be called from within mapping.
I dont know if it will work or not, but can be tried.

User Authorization, best practices for this custom application requirement?

JDeveloper 12c (12.1.2)
We want to use external LDAP (active directory) with ADF security to authenticate and authorize users.
One of our custom application requirements is that there is a single page with many interactive components. It has probably about 15 tables and each table would need to have the following buttons (or similar components):
- delete: (if certain row is selected) to delete it
- edit: (if certain row is selected) takes user to 'edit page' where changes can be made
- create: to create new record for this particular VO (table)
So let's say that would be 3 x 15 = 45 different actions that single user can possibly perform. Not all users have same 'powers' ie some users can only edit CERTAIN tables, and delete from one or two. Most users can create and edit most VOs etc
Back when this application was originally developed using (I believe) 10g JDeveloper with UIX, the way it was done is that we maintained a table in database with 'user credentials' as Y or N flags.
For example: DEL_VO1, EDIT_VO1, ADD_VO1....
So when user is authenticated we would then pull all these credentials from the DB table and load them into the session variables. Then we would use EL to render or not render certain buttons on the page. For example: rendered="#{sessionScope.appDelVo1 == 'Y'}"
Moving forward into latest ADF technology, what would be the best practice to achieve described functionality?

Hi,
ADF BC could have permissions added to the entity level (includes remove and update). So you can create permissions for the entity (as it doesn't matter for data security how data is accessed. If as a user you are nit allowed to change a database table then this is for tables and forms). You can then use EL to check the permission, thus no need to keep the privileges in the database.
If a user is allowed to update an entity then you can check this using EL in the UI
<af:inputText value="#{bindings.DepartmentName.inputValue}"
readOnly="#{!bindings.DepartmentName.hints.updateable}">
whatch this for a full coverage of ADF Security: Oracle ADF Security Overview - Oracle JDeveloper 11g R1 and R2
Frank

What is the best way for this situation?

Hi I have an xml file in my application. over a period of time i have to add few nodes to the existing xml file.
In my business logic when a specific requirement is met i have to add one child node to the existing parent node for an existing xml file.
what is the best way to do this? which api is the best for this?

DrClap wrote:
Muralidhar wrote:
using DOM parser we can parse the xml file but can we write to XML file?Sure. That's the inverse operation of parsing, and it's called "serializing".
The usual way to serialize a DOM to a file is to create a Transformer and apply the identity transformation to the DOM. However there are also third-party XML serializers that don't take that approach.I have not understood what the identity transformation mean. but i have searched for an example and found the following way to do it using Transformer. I hope what i find is right.
Transformer tFormer = TransformerFactory.newInstance().newTransformer();
          tFormer.setOutputProperty(OutputKeys.METHOD, "xml");
          Source source = new DOMSource(doc);
          Result result = new StreamResult(new File(url.toURI()));
          tFormer.transform(source, result);

Best plan for this scenario (migrate oes2 to oes11)

Hi there!
I would like to ask you guys the best plan for migrate a few servers that I have
in oes2 to oes11.
I have four servers in oes2sp2/sp3, these servers have a few NSS
volumes over NCS. Also I have my iPrint service on two machines,
also using NCS. I have one cluster between two machines and
other cluster between the other two machines. For exmaple,
machine1 and machine2, three NSS volumes (every NSS volume is a cluster
resource) and other resource in the same cluster for iPrint. Cluster: CL1
machine3 and machine4, one NSS volume (for other people in the company)
in other cluster. Cluster: CL2. In this cluster only have a NSS volume/resource.
Machine1/3 are physical, machine2/4 are virtual (vmware)
My CA is in other server that I will migrate after a while. So, It seems that there is
no problem with the certificate. Machine1 and machine3 are a replica for the eDir in
my organization.
My plan: I have deployed two virtual machines and one physical with oes11sp1 and sles11sp2.
I think that the best plan is migrate with migration tool iPrint first, like a cluster resource,
and NSS volumes, and after that, make a transfer ID (like a different project)
For machine1/3, move NSS volumes and after, make a transfer ID.
Is this correct? I dont know If I have to delete the current clusters (cl1 and cl2) and
create new ones, after that, create every resource as It was on the old ones.
thank you so much !
Antonio.

Originally Posted by kjhurni
This is just my opinion, of course, but:
If you don't want to have to migrate your NSS data and keep the same server names/IP/s and cluster load scripts, then I believe a Rolling Cluster Upgrade is a good way to go.
If you look in my signature, there's a link to my OES2 guides. Somewhere there is one that I did for our Rolling Cluster Upgrade.
If all you have is NSS and iPrint, then you only need to use the miggui (migration utility) for iPrint--or so I think (I do have to followup on this one as I vaguely recall I asked this a while back and there may have been a way to do this without migrating stuff again).
But your NSS data will simply "re-mount" on the OES11 nodes and you'll be fine (so that's why I like the rolling cluster upgrades).
Let me double-check on the OES2 -> OES11 cluster option with iPrint.
--Kevin
Thank you Kevin for your answer.
Finally, I think Im going to proceed using transfer ID on my servers that Im only using NSS over NCS (I only have two machines with one NSS volume)
because it seems that its a good option. I would like to keep old IPs from all the servers, cluster and resources if possible. So, testing this
migration on my test environment it seems that it works fine:
- I use miggui for transfer id between all the machines: physical -> physical and virtual -> virtual. eDirectory assumes new hostname, IP, etc.
the only task "out of the box" is that I have to delete the cluster and regenerate (reconfigure NCS on the new servers) but its pretty easy. This way
I have the two old ips from the older machines and all the ips from the cluster and the cluster resources also. I think that its the best plan.
For the other two machines that has 4 nss volumes and iPrint I must think about a plan. But with those, Im going to proceed this way. I hope
I have chosen a good plan!
thank you so much all for your answers / advices

Best apps for this

Hello all,
People any idea of some of the best apps for streaming free entertainment, news and sports channels.....
thanks

Any idea people of apps for this>?

Is Illustrator (or Photoshop) the best path for this design project?

Hello,
Forgive my ignorance on this issue.
I am thinking about creating a number of large banners (8 feet high by 3 feet wide) for a display.
I would like to take some scanned images of some historical mural paintings (out of copyright) and prepare them for large format printing.
Now these images are small, and probably quite poor in resolution. I would like to prepare (enhance?) these images so that they show fairly well on the large banners.
Furthermore, I will probably add some borders around them or at least some kind of neutral-colour field on the top and bottom of the image--so the actually printed image will probably be around 4 feet fight by 3 feet wide.
I thought about hiring a designer, but I would like to pick up the skills to do this myself, as I anticipate more banners in the future, and it would be good to learn this skill.
Willing to do take some courses in the appropriate software, and make this my first project perhaps.
Is Illustrator or Photoshop better for this? Or is there something else?
Thank you for any guidance you can offer.

markerline,
You may look at it this way (literally):
The crucial aspect is the relation between viewing distance and size.
The required number of actual pixels is proportional to the actual size and reversely proportional to the viewing distance.
In other words: if you look at a poster (or whatever) twice the size at twice the distance, exactly the same number of pixels is required.
In yet other words: if you view the artwork at a combination of size and distance that correspond to those intended for the final poster, you can see how it will appear.
In yet other words: the same proportion between size and distance results in the same viewing angle, so if your viewing angle is the same, whatever the size, you see what the final viewer sees.
This means that you may judge the artwork on screen or in small/moderate size print if you view it at the intended angle/relative distance.
The required resolution in PPI/DPI will then be reversely proportional to the size of the artwork while you work on it (10 times greater for a 1:10 scale and so on).
Obviosly, in addition, there are other concerns about required resolution (including which resolution is really effective in connexion with the kind of printing in question, and the desirability of smoothness versus roughness which depends on the artwork/effect/whatever in question). I believe you know all that.

Best fan for this heat sink?

Similar Messages

Maybe you are looking for