Best flash movie settings for HDTV playback

I am creating a flash video for a trade show for my company
for the first time, and we are bringing a large HDTV to play to
movie. Do I need specific settings in flash in order for it play
corectly on a large HDTV? I have never before created a DVD using
Flash, Adobe Premiere and Encore either. What are the best file
size an settings for optimun playback?

Getting your stuff out on TV or DVD or whatever means you need to experiment and see what works best.
Make misstakes, encounter unforseen issues, these are the best learning school.
Oh and get yourselve some dvd-rw´s for testing.
For the HDwmv 720P wil do just fine (i am not sure Pro2 can do this). I use them to. I have my pc hooked up to a HD projector via hdmi. Looks great on a big screen.

Similar Messages

HD WMV best settings for HDTV playback?

Hi All,
I have been recording in HD for a couple of years now but have never made use of the high quality, preferring to work with SD as I never had a HD player. I now have an Xbox 360 which allows the HD WMV file format to be played. Superb!
I have captured video on a Sony HD HC3 which at 1080i has a resolution of 1440x1080.
I would like to create HD versions of my tapes in the HD WMV format (or possibly another preffered HD format that can be encoded in premiere pro 2.0?) and also create DVD versions for family who do not have a HD player.
So, without further ado the questions: -
1) What is the best video/audio options to use when encoding the HD WMV considering the playback will be on a 42" HDTV via HDMI cable?
2) I have seen the Dan Isaacs HD to SD conversion. I was going to use that workflow to create an SD version of the video. I'd just like confirmation that there are no unforseen issues with that...?
Looking forward to watching my vids in HD!
Cheers,
MJ

Getting your stuff out on TV or DVD or whatever means you need to experiment and see what works best.
Make misstakes, encounter unforseen issues, these are the best learning school.
Oh and get yourselve some dvd-rw´s for testing.
For the HDwmv 720P wil do just fine (i am not sure Pro2 can do this). I use them to. I have my pc hooked up to a HD projector via hdmi. Looks great on a big screen.

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

Best custom video settings for QT on iPod

What are the best Custom video settings for creating a QT video via iMovie for use with the iPod? That is to say, I want to d/l from a Camcorder and then convert that to Quicktime...ultimately to be played on the iPod.
Thanks,
Lyman

Larry,
Try performing a Google search of world of warcraft mac graphics settings. With the popularity of the game, you'll get quite a few hits, One such hit is:
http://www.xlr8yourmac.com/games/macwowperformance.html
Steve

What's the best flash to use for nighttime sports games?

What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

What are best Mpeg encoder settings for making DVDs?

In switching from PP1.5 to CS3 the procedure is different for making DVDs and we have to encode mpeg files that later get picked up by Encore DVD build proces. What are the best mpeg encode settings for making the DVDs?
Thanks,
Chuck Taylor

Question:
If you are doing a video that is small enough that you are not worried about size, what is the absolute best quality encoder settings? Would a Continous Bitrate result in a higher quality file generally? VBR is for trying to make a smaller file I assume.
I'm frustrated with even white letters on black titles that have some flicker. I just don't seem to get the smooth quality I desire.
Should I look at a different encoder?
If you output PP3 to an AVI and then import it into encore, isn't there a reduction of Q. due to the save to the AVI file?
thanks.

Best in-Aperture settings for iPad

Hi,
Does anyone know what is the best in-Aperture settings for optimum iPad photo quality ? (Maybe able to do a 2x zoom without pixelating)
Currently my previews are set to *"Fit within 2560x2560"* and Quality is set to *"10 High"*
However, in this settings, i realized that iTunes automatically "OPTIMIZES" the pictures.
Therefore, has anyone found the perfect settings ?
Regards
Nycky
Message was edited by: NyckyLim

Doesn't matter, iTunes will still Optimise them. The process doesn't just resize them it also converts them to the format used on the iPad.
Regards
TD

Best Export Settings for PC Playback H264 or Quicktime w/H264

I searched the forum and found a tip about Exporting Quicktime with H264, and have had really good success.
However, trying the H264 directly, which results in an MP4 file, I have poor results. Even with the same Width and Height and bitrates for QT MOV files, they either playback jerky (same bitrate in QT plays fine), or when I scale down the width/height the video flashes green frames and at the end of the clip even reverses and goes forward Using the QT Pro player for Windows).
Also, cannot find an explanation of the "Profile" and "Level" in the Video settings screen.
PS - Yes, this is all new to me, and Yes I am putting the bitrate down to accommodate my older PC. Video source is the MOV 1080p files from the Canon 5d Mark II.
Thanks!
Nelson Salez
PS I spent all my money on the new camera and I cannot afford a MAC, although it is a long term goal.

I searched the forum and found a tip about Exporting Quicktime with H264, and have had really good success.
However, trying the H264 directly, which results in an MP4 file, I have poor results. Even with the same Width and Height and bitrates for QT MOV files, they either playback jerky (same bitrate in QT plays fine), or when I scale down the width/height the video flashes green frames and at the end of the clip even reverses and goes forward Using the QT Pro player for Windows).
Also, cannot find an explanation of the "Profile" and "Level" in the Video settings screen.
PS - Yes, this is all new to me, and Yes I am putting the bitrate down to accommodate my older PC. Video source is the MOV 1080p files from the Canon 5d Mark II.
Thanks!
Nelson Salez
PS I spent all my money on the new camera and I cannot afford a MAC, although it is a long term goal.

Compression settings for G3 playback

Greetings, I'm using EyeTV export to convert recorded clips to QT movies. Although I'm working on a G4, the QT movies will be played on a G3 iMac. I have discoverd altready that the default compression settings create a movie that the G3 can't handle (it jumps frame by frame). It is suggested that I try other compression settings. I would like to, but I don't know anything about this subject.
For reference, The default settings for export to QT movie:
type MPEG 4 video (there are a lot of other options)
frame rate 29.97 fps
compressor quality high (on a slider from least to best)
data rate automatic (it can be restricted to some kbits/sec instead)
Please can someone suggest which settings I might change and in which direction to achieve G3 playback. Video quality does not need to be great, I accept that there is a tradeoff.

Thanks. After some experimenting, I found that export as Quicktime movie as H 263 seems to play on the G3 with good video quality.

Settings for HDTV

I have a 32 inch LED hooked up to my mac via DVI>HDMI. The image is pretty solid at 1900x1080 overscan slected. But using the TV's remote I found a setting called dot-dot and it looks WAY clearer however, it extends the image beyond the screen so I cannot see the menu bar or dock. Any suggestions on the proper settings? I used SwitchResX to get 1900x1080 is there somehting else I should try? Thanks

dross333 wrote:
Hi, I just got an HDTV and am a little confused as to what are the "best" settings for video. When I go into the FIOS video menu I'm a little confused.
Any tips or suggestions would be appreciated.
Thanks
David
The "best" settings are what looks best to you. That being said, it also depends on the TV you are hooking up to. Ideally it should be set to the aspect ratio of your TV (I'm assuming that would be 16:9 for an HDTV) and the native resolution for HD (1080i or 720p - depends on your TV and I am assuming you have a flat panel and not a CRT set).
Now comes the trickiest one the SD override. Some sets don't accept 480i over HDMI so be careful here. Setting this to "OFF" causes the FiOS box to output SD (4:3) at whatever resolution you have selected for HD(the box upconverts the resolution). The best bet is to try the different options for the SD Override and select whatever works best with your TV and looks best to your eye (some TV sets do a better job of converting SD to their native resolution than the box will). The other option is whether you want SD in 4:3 (black side bars) or stretched to fill the 16:9 screen (personal choice is to never stretch, YMMV). As always, the best setting is what looks best to you
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Best Flash Export Settings?

Hi All,
Could anyone recommend the best settings for "Sharing" the final edit to Flash, to be used on the web?
My preset is HDV, 1080i. The m2t 1440 x 1080 high def file looks awesome! How can I best retain that in Flash?
Thanks, Stan

Stan,
So very much will depend on the embedded Flash Player on the Web site. Can the Web master give you the details of the design? Also, what is the anticipated audience's connection speed? Those will likely direct you.
Good luck,
Hunt

Best export format settings for mac

Hi,
I have a mac OS Lion 10.7.2 and Adobe Premiere Pro CS5.5. I'm new to premiere pro and video editions and have just finished my family's vacation video clip edition, that contains photos and videos.
I have tried several export format settings, but the only satisfying one was MPEG2-DVD with preset "Match Source Attributes (Highest Quality)". The problem was that it seems to be specific for DVD, that's why it was generated two separated files, a m2v for video and a wav for audio.
I would like to play it on my mac and I couldn't do it with the players I have installed: QuicK Time didn't run it and VLC ran without audio.
I have 4 questions:
Is there a player that can play both video and audio? Or is it just for DVD purpose?
If not, what would be the best export format settings to have a HD 720p video with best quality? All the other settings produced very low quality videos, even in very huge size! I have tried flv, mpeg, mov...
Do I need any specific codec for it?
I have already installed perian codec. Wouldn't it be possible to export for AVI format? Why doesn't it show on my format options?
I have searched many forums and didn't find the solution yet!
Does anybody have any suggestion?
Thanks a lot, Guilherme

Hello guys,
I've created another sequence to build my video. Now I am using a AVCHD 1080p30. My video contains photos and videos. The videos are 720p, but my pictures have very high resolution, 3968x2232. I won't edit them because there are lot of pictures. So, my question is: What would be the best format for this sequence? mp4? mpg? mpeg? mov? I thought that they are very similar! Are there big quality differences between them? Size is not a problem, but if the formats don't make big differences on the final product, the smaller one could be sufficient?
Any tips?

Recommended settings for HDTV

Hi, I just got an HDTV and am a little confused as to what are the "best" settings for video. When I go into the FIOS video menu I'm a little confused.
Any tips or suggestions would be appreciated.
Thanks
David

dross333 wrote:
Hi, I just got an HDTV and am a little confused as to what are the "best" settings for video. When I go into the FIOS video menu I'm a little confused.
Any tips or suggestions would be appreciated.
Thanks
David
The "best" settings are what looks best to you. That being said, it also depends on the TV you are hooking up to. Ideally it should be set to the aspect ratio of your TV (I'm assuming that would be 16:9 for an HDTV) and the native resolution for HD (1080i or 720p - depends on your TV and I am assuming you have a flat panel and not a CRT set).
Now comes the trickiest one the SD override. Some sets don't accept 480i over HDMI so be careful here. Setting this to "OFF" causes the FiOS box to output SD (4:3) at whatever resolution you have selected for HD(the box upconverts the resolution). The best bet is to try the different options for the SD Override and select whatever works best with your TV and looks best to your eye (some TV sets do a better job of converting SD to their native resolution than the box will). The other option is whether you want SD in 4:3 (black side bars) or stretched to fill the 16:9 screen (personal choice is to never stretch, YMMV). As always, the best setting is what looks best to you
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How do I change the Version Code in the Flash Android settings for the Android app Market?

I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
"The new apk's versionCode (1000000) already exists."
In the Flash Adnroid settings I changed the version label but that did not help.
So I have two questions:
How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
What is the difference between the version number and version label?

I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
This is the what the XML file says:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/2.6">
<id>com.company.nameofapp</id>
//Below is the correct version number, but has no relation to the version code.
<versionNumber>1.1.0</versionNumber>
<versionLabel>NewLayout</versionLabel>
<filename>Name of app</filename>
<description/>
I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html) But I don't know how to place it into the xml file without conflicting with other code.
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      package="com.example.package.name"
      android:versionCode="2"
      android:versionName="1.1">
    <application android:icon="@drawable/icon" android:label="@string/app_name">
    </application>
</manifest>
Any other thoughts are much appreciated.

Best flash movie settings for HDTV playback

Similar Messages

Maybe you are looking for