Best format for ripping video

I have 3 home movies that are only on dvd, master tapes got misplaced somewhere,I do however still have twenty something 8mm tapes of other home movies but that is a whole other post, anyhow I downloaded handbrake for these 3 dvd movies and to be honest I am over whelmed with all the options.
What is the best format with no or little quality loss for saving these for raw backups stored on external hard drive, maybe on data dvds as a precaution?
Also I will make copies of these edit and save to a format which will be good for viewing on hdtv via applae tv or ps3, I was thinking mp.4 and doing at 16:9.. would this be my best choice for the viewing versions?
The actual quality of the dvds are well not to good so I am trying to keep the little bit that I have.
Message was edited by: rwltrz4
Message was edited by: rwltrz4

thanks, what I have been doing is using handbrake and encoding as mp4, averages about 1.5 gig per hour and quality is same as dvd, then I open quicktime pro and trim edit stuff out and resave, still encoded as mp4 but gets saved as .mov.
this seems doable for storage now I hoping that I can copy paste these movies to a folder for viewing on apple tv or ps3, should work, however bring me to another question, should I convert these to 16:9 since they will be watched on a hdtv?
right now it seems all the footage is being imported 4:3 and at a resolution of 640x480, how will these look on a 1080p sony?

Similar Messages

  • Best format for converting video

    What is the best format for converting videos for your iPod? I am using handbrake but there are alot of settings. What is the best one? mp4,avi,ogm? and what about codecs? aac audio, mp3 audio,h.264 video mpeg 4 video, .mp4 video? Need help?

    See this Wikipedia article for some encoders:
    * http://en.wikipedia.org/wiki/Theora#Encoding

  • What is the best format for ripping CD's to get the best quality?

    I'm sure this has been asked before but I wanted to see what was the latest thinking.  Any ideas of the additional Hard Drive usage?  Thanks

    mysteryroach wrote:
    My questions are: What are the best settings for ripping cd's in the AAC format?
    It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
    Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
    Yes. Just put them in a playlist and burn.
    Does the AAC format have VBR like the MP3 format?
    Yes. You will see it as an option in the Import Settings.
    Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
    EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

  • Best Format for Archiving Video Files

    I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later.
    I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am open to suggestions), to put both the backup Video TS folders on, as well as the Quicktime movies themselves.
    My guess is, the best format for the QT movies would be their original DV-NTSC, but at around 13GB an hour, this can add up pretty fast.
    The h264 .mov codec looks great, takes forever to render, and it seems the file size difference to DV-NTSC is nominal at best.
    Obviously the future is some kind of HD, so these movies will never look great years from now, but I want them to be preserved for him at the best quality possible, at the smallest file size, if it will not compromise the quality too much.
    I know I can render them significantly smaller as h264 .mp4 files, or as DIVX, (which also takes a long time), but I imagine they are of significantly reduced quality that would be visible in future video editing he might do.
    If DV-NTSC is the only way to go, so be it. But if not, then any suggestions for what other format I could use to save these QT files, without visible loss of quality is greatly appreciated.

    Thanks for all the advice. And I mean everyone.
    Here is my latest dilemma.
    Though 15 years old, the original Vhs's play beautifully. Aside from some (expected) glitches in the beginning or end of some of the shots, the video has not degraded appreciably. This is great news, as my cousin wanted to make back ups before degradation begins.
    First, I captured the Vhs movies and corrected some bad color, mostly due to poor white balancing, and on the computer, they looked great in comparison. I burned DVD's and they looked terrible in comparison with the originals. Now I know I am going to lose some resolution when going to DVD, but it seemed harsh, so I ran some tests.
    I burned a DVD of the original capture, with no color correction, just the raw footage and the DVD did not look much better, so it wasn't the color correction.
    Not satisfied, I made a copy from the FCP timeline straight to Vhs, (I should note, through the ADVC-110.) This looked significantly degraded as well.
    Finally, I made a straight dub from Vhs to DVCam, figuring that had to look good, and that also looked significantly degraded, compared to the, (now looking pristine), Vhs original.
    As the original Vhs looks so good, what good would a TBC do? Or a proc amp?
    Is there some secret to capturing and exporting Vhs that I am missing? Or, will it always look significantly degraded, even straight to DVCam?
    +David Murray wrote: There is an industrial way to get good VhS copies but it is extremely expensive+
    I don't know what this is, but I am sure it is clearly out of our league, but David M., if you are still following this thread, I'm curious, would this ultra expensive method actually result in a dub that looks like the original? I am actually really shocked at how bad the straight DVCam dub looks. It really does not look much better than the color corrected, computer exported version.
    The Vhs tapes of my cousins daughter are as precious to him as anything he has.
    As they date back 15 years, he is concerned about the longevity of the tapes.
    As there are over forty hours of them, he wants them to be in an editable format, so later he or his daughter can make a highlight reel, or whatever. So thus the QT movie archive/backup on HD.
    Whether as Finalcutter said, that this drive, even if unused, and put in a cool dry safe, might not function years down the line, makes it iffy, but what other choice is there for editable versions, unless I break the QT movies up into 20 minute chunks and archive them to over a hundred DVD's instead. Perhaps that is the safest solution, though certainly time consuming.
    As failure of the HDD somewhere in the future is likely, though not certain, I am still not sure that the HDD holding all his QT movies for future editing is the wrong way to go.
    As it is a digital version, and not an analog copy, I get that a DVCam backup of the originals is the best option. I will suggest to him that we do this as well, even though he does not have DVCam himself. But again, is there something I am missing here? Why does the Vhs to DVCam copy look so degraded? Is there anything I can do to keep the original quality, or will it die with his original Vhs as it slowly degrades over time?

  • What is the best format for HDV video for a computer playback

    Hello guys,
    I have made a very nice HDV video and after the frustration and awful results with compression for
    SD DVD, I have decided just to export that video as a file, put that file on DVD, so people can just pop that DVD into their computers, copy that file on their HD and play it. (so there is no compression needed for over internet data transfer, Bit Rates for space, etc). The video is
    HDV 1080i 60. If I export it from FCP as a QT Movie the quality is beautiful. But when being watched on the computer screen, there are those interlace lines visible, when any faster motion in the video occurs. So I am wondering, what would be the best export option in order to provide best qualities for computer playback. Would it be some of those QT progressive modes, like 1080 p24? Or any other?
    Thank you for your help.
    Cheers,
    K.

    Chris Walsh1 wrote:
    Why are you using FCP 6.02? Why didn't you do the update to 6.04?? I did, and I am having tons of issues
    That is pretty much the reason. It is fresh out the gate and so far untested. I am not an early adopter of any new technology (soft or hardware wise). I like to wait it out and see what other peoples' experience is. A bit of a prickish way to put it is: "In Chess, the pawns go first." (I'm a big Chess nerd -- I have Chess analogies for just about everything).
    But even if the latest FCP, OS X and QT versions were humming along without any reported issues by the "power users" (by that I mean people who are editing on their systems 40+ hours a week in a professional capacity) I still wouldn't have upgraded because I am in the middle of three projects.
    Well, that isn't entirely the truth. I started all three projects on a PowerMac G4 running OS X 10.4.11 and FCP 5.1.4. In the midst of this I started an across-the-board upgrade -- new computer, monitor, OS and FCS. But what I did (am still doing) is migrating from one to another and testing the performance on the new one before committing. In doing my research before hand, I see that the magic cocktail for stability appears to be OS X 10.5.2, FCP 6.0.2 and QT 7.4.5 so I built my new MacPro to that and stayed there. I have migrated all my current projects to the new system and have been putting the new setup to the test and is passing at every turn, so I feel confident I can work on this new system and will be retiring the PowerMac soon, but throughout this process I always had my stable G4 setup available so I wouldn't risk losing any work.
    Might the reason the video you compressed "looked great" be because you didn't do the update?
    Maybe, but I can't say with any certainty.
    In the old compressor, I had no problems (in earlier versions of my project) compressing the video. It always looked GREAT! In 3.03, I get weird issues that don't make sense to me at all.
    In the older version of compressor, this never happened. Even on this project.
    Then I would think the update is the likely culprit.
    Here is what I would like to try as my final attempt. I just bought yet ANOTHER computer. A Mac Pro/Two 2.8GHz Quad-Core Intel Xeo. I'd like to try to load Final Cut Studio on this machine, but where should I stop my upgrading? What is good stable working system for everyone??
    OS X 10.5.2, FCP 6.0.2 and QT 7.4.5 is working great for me, and it appears for others here as well. I am running a new octo-2.8GHz Mac Pro.

  • Best format for Importing video?

    When I create a new event in Imovie and import video it will give me two options, "Large 960x540" (which says it will "reduce image size with little quality loss") or "Full" (which says "selecting full on this computer may result in degraged video playback").
    Here is my dilemma.
    I would think Full would give me the best image quality when I create a "project" and export it.  So I tested it.  I imported the same 15 sec clip with both options.  The clips were shot from my Iphone 4s.  I put both clips in the same "project". So my project is 15 seconds of "Full" video followed by 15 seconds of the same footage in "large" format.  I "finalized" the project and then exported it to my desktop.  I actually did it two ways, one was at 720p and one was at 1080p. 
    When I watch the video, it actually looks like the second half of the "project" is slightly crisper/clearer which is the part of the "project" that came from the "Large" import not the "Full" import.
    Is that possible or are my eyes playing tricks on me?  I am viewing it with QTplayer and utilizing my full screen of my computer which is a 13" MBP.  Should the section of the video from the "Large" import look better than the "full" or vice versa?
    Thanks,
    Ehren

    QuickTimeKirk,
    We posted our responses about the same time.
    I agree with what you're saying but he did ask for the best possible quality.
    I imagine with all the reencoding between the formats the video isn't going to look that great.
    As a side note, given the above scenario I've seen better quality video acquired, when the DVD Players output is connected straight to a mini DV camcorder and imported into iMovie.
    That's just my experience when converting video of questionable quality to begin with.
    I don't know how important it is to get the best quality but, there is a program called Cinematize that guarantes no loss in quality during the conversion process (never used it though).
    Cinematize 2 for Macintosh $60.00
    Cinematize 2 Pro for Macintosh $130.00
    15 day free trail
    http://www.miraizon.com/index.html

  • Best Format for exporting video to Itunes for Apple TV in Quicktime Pro

    Hi- I have a large library of old VHS tapes and soem Video 8 home movies - I want to convert these to H.264 format so I can load them into Itunes and stream to my Apple TV which is hooked up to my 1080 HD 48" TV. Any help guidence here would be greatly appreciated.

    You're in the wrong forum.

  • What are the best settings for ripping cd's in the AAC format?

    I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

    mysteryroach wrote:
    My questions are: What are the best settings for ripping cd's in the AAC format?
    It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
    Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
    Yes. Just put them in a playlist and burn.
    Does the AAC format have VBR like the MP3 format?
    Yes. You will see it as an option in the Import Settings.
    Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
    EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

  • What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks

    function(){return A.apply(null,[this].concat($A(arguments)))}
    bmiller0525 wrote:
    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks
    thats way too vague of a question... best what?  quality? size? playback?
    best quality then use high bitrate, small size use low bitrate.

  • For iPhone and Android, what is the best file format for watching videos?

    For iPhone and Android, what is the best file format for watching videos?

    You can try these setting. They are from CS5.5 but should work in CS4.
    Make sure you check Use Max. Render Quality.

  • Best format for DVD studio pro??

    I will be exporting from FCP4.5 and am wondering what is the best format to get the best possible quality from FCP to DVDSP? Also, should I go through compressor and what settings should I use?
    I also want to make my own video transistions, what is the best format for those as well?
    Thank You

    The movie is 90 minutes.
    You didn't mention your video format. You can export your movie as QuickTime Movie (not QT Conversion), same settings and self contained (my favorite flavor). The use that movie in Compressor and use the Best Quality DVD: 90 min presets encoding your video to MPEG2 and your audio to Dolby 2 (AC3).
    That's the best standard workflow. With standard I mean that sometimes some kind of footage can need different treatment.
    Hope that helps !
      Alberto

  • Best Format For Front Row

    Hi what is the best format for videos in front row? Most videos I have are avis so I had been saving them as .mov files instead until recently when I discovered I could export them to Mpeg4 and in the process make them widescreen - I also noticed that when I saved these videos as .mov they took up about 5 gb but as mp4 they took up 500mb. So anyone have any opinions on what is the best way to do it?
    Cheers

    AVI and MOV are both simply "containers". The video and audio files inside them can be many formats with less or more compression. The MPEG-4 compression can be very good, of course, depending on the quality of the original file. The MOV files you saved must be using a different type of video compression that may be better quality but takes up more hard drive space. The "best" type of compression is probably a personal choice. What type of software are you using to save the files? QuickTime Pro?
    -Doug

  • Best format for Premiere elements 12?

    What is the best format for making movies on PRE 12? My clips are now .mov files, whether on iPhone 5 or Nikon 7000 SLR. Should I still convert them to .AVI files?

    fish614
    Are you working with Nikon D7000 as well as the iPhone video?
    What are your settings for these devices when you record?
    How do you want to view the export of your Premiere Elements Timeline after you edit this video on the Premiere Elements Timeline?
    ATR

  • The best format for output

    Hi All,
    working in animation project to be broadcasted on a TV channel as HD1080 50i,
    1- all the animation layers was rendered from TOONBOOM as .SWF to keep it in vector for compositing issue.
    Dose SWF lose any quality? we always use TGA sequence with alpha in our past SD projects but now we found SWF is a smaller file size and allows zooming Because it keeps all vector lines.
    2- compositing each scene in after effects cs6 and then render them.
    What is the best format for output to deal with premiere cs6 as a real time playback ( my editing pc includes gtx680 4gb., many HGST 3tb with raid controller,64g ram, aja kona 3g) so do I go with TGA sequence (I think it will destroy the raid Because of the large number of small-sized files in read and write ) or MOV uncompressed (I'm afraid of the space size and don’t know it will play in real time ) or what is the best compressed format Maintaining video image quality as its now will be my only master source?
    Many thanks,
    sherif

    Thanks Rick for your reply,
    Regarding the SWF i moved to flash pro forums and they are supporting me now,
    My system is a pc, win.64, I7-3930K, 64G RAM, EVGA GTX680 4G, Many HGST 3TB with raid controler,
    Some advised me to go with Quicktime Prores HQ or DNXHD or DPX ,
    In this year project my client's requirement for delivery is :
    DNxHD 120 Codec, wrapped with QuickTime rapper, which means a file with MOV extension and the codec used is DNxHD 120 ( 1080@50i HD)
    So do i work with dnxhd 120 from the beginning to the delivery? (and it will be my only master source) or another format encode it at the end to dnxhd 120? ( i will distribut this project to many channels after the first run exclusivity period end with different requirements).
    Thanks,
    Sherif

  • Best export for flash video

    I have completed an edit of a 7 minute teaser for a feature film and need to export it to be displayed online in a flash player. The footage is HD 1080i, 29.97fps and edited in the Animation coded. My experience with best exports for flash conversion is very limited so please bare with with.
    1) Is it possible to export directly from FCP to a flash file? If yes, would that be a good idea, or should I use third party softwares for better results?
    2) Which third party softwares are recommended for flash conversion? And what export compression should I use in FCP for best flash conversion results?
    3) Any other tips and tricks to get the best quality for flash video display?
    Any help would obviously be greatly appreciated. Thank you.

    When I have quality HD video that I want to export for flash, I compress it with h.264 codec. Then, with the new version of Flash, you can swap out the .mp4 extension for .f4v and your good to go in Flash. Quality looks pretty good at a fraction of the file size.

Maybe you are looking for