Best format for SSD when i use os x and windows

Which is best format for my new SSD when i want use OS X and Windows together ? I mean when i will be in windows i can copy folders from windows to OS X folders and conversely ? Thank you for all info

Before you do anything make sure that anything you have on your external hard drive is moved somewhere else as all information will be lost in this process. Then make sure it is plugged into your mac
Here's what you need to do next. If you click on your Macintosh HD on your desktop then click on applications. Then scroll down and click on utilities. In there you need to click on disk utilities. When this opens you need to select your external hard drive from the list on the left.Then on the tabs at the top click on partition but just leave it all as is except you need to change the format from Mac Journaled to Fat 32 then click apply. It will then be ok for use on both Mac & PC but be warned they don't like each other so some stuff will work and some stuff won't. If it formatted for Fat 32 then mac will sometimes not read it through a wireless connection. (I am trying to figure this at the moment and can't seem to get it to work).
Good Luck

Similar Messages

Best Format for Archiving Video Files

I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later.
I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am open to suggestions), to put both the backup Video TS folders on, as well as the Quicktime movies themselves.
My guess is, the best format for the QT movies would be their original DV-NTSC, but at around 13GB an hour, this can add up pretty fast.
The h264 .mov codec looks great, takes forever to render, and it seems the file size difference to DV-NTSC is nominal at best.
Obviously the future is some kind of HD, so these movies will never look great years from now, but I want them to be preserved for him at the best quality possible, at the smallest file size, if it will not compromise the quality too much.
I know I can render them significantly smaller as h264 .mp4 files, or as DIVX, (which also takes a long time), but I imagine they are of significantly reduced quality that would be visible in future video editing he might do.
If DV-NTSC is the only way to go, so be it. But if not, then any suggestions for what other format I could use to save these QT files, without visible loss of quality is greatly appreciated.

Thanks for all the advice. And I mean everyone.
Here is my latest dilemma.
Though 15 years old, the original Vhs's play beautifully. Aside from some (expected) glitches in the beginning or end of some of the shots, the video has not degraded appreciably. This is great news, as my cousin wanted to make back ups before degradation begins.
First, I captured the Vhs movies and corrected some bad color, mostly due to poor white balancing, and on the computer, they looked great in comparison. I burned DVD's and they looked terrible in comparison with the originals. Now I know I am going to lose some resolution when going to DVD, but it seemed harsh, so I ran some tests.
I burned a DVD of the original capture, with no color correction, just the raw footage and the DVD did not look much better, so it wasn't the color correction.
Not satisfied, I made a copy from the FCP timeline straight to Vhs, (I should note, through the ADVC-110.) This looked significantly degraded as well.
Finally, I made a straight dub from Vhs to DVCam, figuring that had to look good, and that also looked significantly degraded, compared to the, (now looking pristine), Vhs original.
As the original Vhs looks so good, what good would a TBC do? Or a proc amp?
Is there some secret to capturing and exporting Vhs that I am missing? Or, will it always look significantly degraded, even straight to DVCam?
+David Murray wrote: There is an industrial way to get good VhS copies but it is extremely expensive+
I don't know what this is, but I am sure it is clearly out of our league, but David M., if you are still following this thread, I'm curious, would this ultra expensive method actually result in a dub that looks like the original? I am actually really shocked at how bad the straight DVCam dub looks. It really does not look much better than the color corrected, computer exported version.
The Vhs tapes of my cousins daughter are as precious to him as anything he has.
As they date back 15 years, he is concerned about the longevity of the tapes.
As there are over forty hours of them, he wants them to be in an editable format, so later he or his daughter can make a highlight reel, or whatever. So thus the QT movie archive/backup on HD.
Whether as Finalcutter said, that this drive, even if unused, and put in a cool dry safe, might not function years down the line, makes it iffy, but what other choice is there for editable versions, unless I break the QT movies up into 20 minute chunks and archive them to over a hundred DVD's instead. Perhaps that is the safest solution, though certainly time consuming.
As failure of the HDD somewhere in the future is likely, though not certain, I am still not sure that the HDD holding all his QT movies for future editing is the wrong way to go.
As it is a digital version, and not an analog copy, I get that a DVCam backup of the originals is the best option. I will suggest to him that we do this as well, even though he does not have DVCam himself. But again, is there something I am missing here? Why does the Vhs to DVCam copy look so degraded? Is there anything I can do to keep the original quality, or will it die with his original Vhs as it slowly degrades over time?

Best Format For Front Row

Hi what is the best format for videos in front row? Most videos I have are avis so I had been saving them as .mov files instead until recently when I discovered I could export them to Mpeg4 and in the process make them widescreen - I also noticed that when I saved these videos as .mov they took up about 5 gb but as mp4 they took up 500mb. So anyone have any opinions on what is the best way to do it?
Cheers

AVI and MOV are both simply "containers". The video and audio files inside them can be many formats with less or more compression. The MPEG-4 compression can be very good, of course, depending on the quality of the original file. The MOV files you saved must be using a different type of video compression that may be better quality but takes up more hard drive space. The "best" type of compression is probably a personal choice. What type of software are you using to save the files? QuickTime Pro?
-Doug

Best format for upload to a website

i would like to know what is the best format for upload to a website, what i got now is an exported quicktime self contained movie from fcp 25 minutes in length.
the footage itself is shot on mini dv and edited on an uncompressed 8 bit sequence, when exported to quicktime it is 28 gb in size so it is kind of a heavy one.
is it possible to upload it in one piece ( apple recommends exporting to mpeg4 yet i got a bad quality out of this using mpeg streamclip.
what would be the best compreessor for this
than you very much

i got a bad quality out of this using mpeg streamclip.
Check the links that Cristina posted, then let us know if your quality improved, using Compressor...it should.
One question for you regarding quality...are you referring to overall quality of the full frame image, or are you displeased with text/graphics.
If this is the case, then I'd wonder if you edited in a DV sequence, then dropped the edited content into an 8bit timeline for exporting at better quality.
This can cause degradation of the image (particularly text/graphics), since you're taking a 720x480 frame and ever-so-slightly vertically scaling the frame up to 720x486.
Let us know what you did...and your results w/Compressor.
K

Best format for converting video

What is the best format for converting videos for your iPod? I am using handbrake but there are alot of settings. What is the best one? mp4,avi,ogm? and what about codecs? aac audio, mp3 audio,h.264 video mpeg 4 video, .mp4 video? Need help?

See this Wikipedia article for some encoders:
* http://en.wikipedia.org/wiki/Theora#Encoding

Best Practises for doing Master Scheduling using SNP

Hello Gurus ,
Can you please suggest the best practises for doing Master Scheduling using SNP . Which engine to use , what would that mean etc
Regards,
Nick

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

HT204053 best storage for filies deleted but used frequently wd drop box flash drive

best storage for filies deleted but used frequently wd drop box flash drive

Thanks LowLuster! With that info I have another questions if that's ok. First, I'm sure it's formatted to fat32. I have learned I can't transfer movies over 4gb. I use an external hard drive for those. The files are ones I've downloaded from YouTube in the mp4 format and are never over 1gb. They're all mb in size.
I didn't realize flash drives had limited writes. Is there any way to confirm I've reached the limit? Both times I reformatted it I was able to add back the videos I previously had on it. I would say there were a hundred or so. Both times I left some "growing room" on the flash drive so I could add more files. And, both times I was able to continuing adding until I had reached the max capacity. The problem occured after I tried deleting files to free up space. Does this make sense with "the amount you have used it" theory? Does it start to become buggy at that point, or does it just make writes to the drive impossible?
Thanks

Best format for DVD studio pro??

I will be exporting from FCP4.5 and am wondering what is the best format to get the best possible quality from FCP to DVDSP? Also, should I go through compressor and what settings should I use?
I also want to make my own video transistions, what is the best format for those as well?
Thank You

The movie is 90 minutes.
You didn't mention your video format. You can export your movie as QuickTime Movie (not QT Conversion), same settings and self contained (my favorite flavor). The use that movie in Compressor and use the Best Quality DVD: 90 min presets encoding your video to MPEG2 and your audio to Dolby 2 (AC3).
That's the best standard workflow. With standard I mean that sometimes some kind of footage can need different treatment.
Hope that helps !
Alberto

Best format for Premiere elements 12?

What is the best format for making movies on PRE 12? My clips are now .mov files, whether on iPhone 5 or Nikon 7000 SLR. Should I still convert them to .AVI files?

fish614
Are you working with Nikon D7000 as well as the iPhone video?
What are your settings for these devices when you record?
How do you want to view the export of your Premiere Elements Timeline after you edit this video on the Premiere Elements Timeline?
ATR

The best format for output

Hi All,
working in animation project to be broadcasted on a TV channel as HD1080 50i,
1- all the animation layers was rendered from TOONBOOM as .SWF to keep it in vector for compositing issue.
Dose SWF lose any quality? we always use TGA sequence with alpha in our past SD projects but now we found SWF is a smaller file size and allows zooming Because it keeps all vector lines.
2- compositing each scene in after effects cs6 and then render them.
What is the best format for output to deal with premiere cs6 as a real time playback ( my editing pc includes gtx680 4gb., many HGST 3tb with raid controller,64g ram, aja kona 3g) so do I go with TGA sequence (I think it will destroy the raid Because of the large number of small-sized files in read and write ) or MOV uncompressed (I'm afraid of the space size and don’t know it will play in real time ) or what is the best compressed format Maintaining video image quality as its now will be my only master source?
Many thanks,
sherif

Thanks Rick for your reply,
Regarding the SWF i moved to flash pro forums and they are supporting me now,
My system is a pc, win.64, I7-3930K, 64G RAM, EVGA GTX680 4G, Many HGST 3TB with raid controler,
Some advised me to go with Quicktime Prores HQ or DNXHD or DPX ,
In this year project my client's requirement for delivery is :
DNxHD 120 Codec, wrapped with QuickTime rapper, which means a file with MOV extension and the codec used is DNxHD 120 ( 1080@50i HD)
So do i work with dnxhd 120 from the beginning to the delivery? (and it will be my only master source) or another format encode it at the end to dnxhd 120? ( i will distribut this project to many channels after the first run exclusivity period end with different requirements).
Thanks,
Sherif

HT1335 My ipod classic have no software and I am stuck with it. It was formatted for apple but I use windows 8. Please help. Thanks in advance.

My ipod classic have no software and I am stuck with it. It was formatted for apple but I use windows 8. Please help. Thanks in advance.

Hello there, DrDhillon.
The following Knowledge Base article goes over the steps that will help you resolve your issue:
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!

We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

Best format for iMovie input: DV or AppleIntermetiateCodec

I thought (and I think I read here several times) that the best input for iMovie, if you use a MiniDV camcorder, was to import the DV files into the app.
Now I have read an article ( http://imovietricks.blogspot.com/ )where it is said that iMovie does not properly work with those files and that a previous conversion to AppleIntermediateCodec should be give better quality.
Can someone give more information about this subject?
I think is a very interesting subject not only for the quality but because AppleIntermediateCodec files are half the size as DV files which make them more easily stored.

I have only DV camera and this issue is very important to me. I have read probably all the threads about it and have seen no solution. I even bought an e-book from a guy who said here that he knows the solution (but didn't of course open the secret here in forum) and guess what he recommended in his book? To convert the files to AIC.
As there have been so many discussions about it then I wouldn't say that iMovie works perfectly well with DV. Even Macworld mentioned this in their review of iMovie '08:
+"...The bad news is that in order to get this real time performance without renders or progress bars, there is some sacrifice in quality. For interlaced video such as DV and 1080i HDV, iMovie now uses single-field processing. This means every other horizontal line of the video is thrown out, which reduces the sharpness of the footage..."+
http://www.macworld.com/article/59668/2006/12/imovie08.html
Sorry, but I have difficulties believing anyone who claims that iMovie '08 handles DV fine. If all these reports were wrong and iMovie really could give full quality from DV then Apple would have refuted such reports (especially ones by popular magazines like Macworld) and given some guidelines.

My macbook air wont change songs when for itunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minute then stop working again. Did i change a settting? what should i do?

My macbook air wont change songs for iTunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minutes then stop working again. Did i change a setting? what should i do?

Hello King Cutway
If you are having issues with the functions keys, then check the settings in System Preferences > Keyboard and look to see if Use all F1, F2, etc. keys as standard function keys is unchecked so you can use it properly.
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/HT1296
Regards,
-Norm G.

Best format for ps3 and apple tv

What is the best format for viewing movies on a hdtv (1080p) via ps3 and apple tv?
Not sure what my best option would be in the sharing/export options, also should I make it 16:9 even though all the footage was 4:3?
Message was edited by: rwltrz4

Thanks.
I've posted up on their forum too (the folks over there are not as responsive as you guys, helpful, but not in the same volume )
I kinda hear what you're saying, but the encoding time (fps and time taken) is pretty slow on my PPC G5 iMac at the moment, and if the Turbo.264 is doing most of the processing then from what you say it'll stay the same on a new Intel Mac. I really hope not, or it'll be me throwing in the whole notion of recording TV on my Mac and heading off down the shop for a PlayTV for the PS3.
Either that or hope for a decent upgrade to the Mini at Macworld, sling the Apple TV on to ebay (film rental selection here in the UK is still pretty weak) and replace with a Mini, plug the tuner in that and watch native EyeTV recordings without the need for lengthy encoding. I reckon Front Row, and an iPhone Remote will do almost as good a job for my music as the Apple TV does.
One day we will look back and laugh at the notion of an hour long TV show being 'encoded' for playback at all, let alone waiting more than 2 minutes for the process to happen!

Best format for SSD when i use os x and windows

Similar Messages

Maybe you are looking for