Best format/settings for photos to a slideshow

What would be the optimal format/settings of a photo going to a slideshow in DVDSP? I have the camera RAW files and can go out to any format or resolution necessary.
I have tried a few combinations. The best outcome has been a 600 ppi TIFF. But the main problem I am having is some rastering around the edges and in the details of the image. It is a product shot on a white background. I am working in FCS 2. Thanks.

Usually you are best off bringing it in at the size needed and not let DVD SP do the resizing (but of course many people have different approaches so keep that in mind)
Not sure if you have Photoshop, but there are templates (in the newer versions) for NTSC and PAL and the various sizes (Anamorphic etc.)
Place you pictures in there and crop/size as needed and save as a tiff.
Also Studio X had good tips here
Images In Slide Show
Some other threads which may alsso be worth looking at for thoughts, suggesstions and potential issues:
Slidshow Quality

Similar Messages

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

Best color settings for document view?

Which is best color settings for different document formats with the same color profile?
There are Tiff and Pdf documents with same color profile but look different.
Thanks!

Bridge is file browser with custom preview options, but it's not a pre-press examination application. Just don't use it for that purpose.
P.S. First one is the best as far as I see. I don't like ruined «A» in second example. If you want to get more ballance, you can shift the left side also a bit.

For my power shot S5IS, best camera settings for 4 X 6 prints?

for my power shot S5IS, best camera settings for 4 X 6 prints? I would like to have the best setting so when i print out the photos,i do not need to crop or trim. It is close, but i feel it can be better.

The bad news is that you can't do anything in camera to get that result. The good news is that once you understand the possibilities you'll appreciate being able to control how your prints get framed (cropped). Your camera produces images in a 3:4 ratio while a 4 X 6 is a 2:3 ratio so if you don't know in advance that you need to crop some from the top, bottom, or both to make your image fit the 2:3 ratio & frame too tightly when taking the photo you're in trouble. Learn to shoot in a way that allows cropping to match common print sizes, and find a simple editing program to crop in computer. This should be standard practice because even though you may want a 4 X 6 now down the road you might want a 5 X 7 so keep your options open.
If you don't have an editing program that easily does this & you're on a PC download Picasa which is an excellent program for this & it's free. Once you have it running select one of your existing photos, select "crop" from the menues on the first tab & then play around with the different options Picasa has built in to see the effects to your image. NOTE that it won't throw away the data outside the crop box even though it may look like it has. You always have the option to "undo crop". Once you get a result you like you "export" & create a new file cropped as seen on screen WITHOUT modifying the original file.
"A skill is developed through constant practice with a passion to improve, not bought."

What are the best sequence settings for a movie to be put on youtube?

I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
I have tried the following settings only to get a blurry image result in the end:
Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
Editing Timebase: 29.97
Quicktime Video Settings:
Compressor DVCPRO50 - NTSC
Quality: 100%
This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
Thanks,
Caleb

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

What is the best export settings for mini DV?

Hi folks,
Love this forum, it has been a huge help for a novice. I am looking for answers to a more tailored question. I believe this will help others too!
What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
1. archive an exact duplicate without any quality loss of an imported mini DV tape. My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
I really appreciate you reading and considering response.

First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
2nd, read below for a "trick" that is required to export to tape
Export to Tape http://forums.adobe.com/message/4699448
Hardware MPE must be OFF to be able to export via Firewire
http://forums.adobe.com/thread/902499
http://forums.adobe.com/thread/880824
Also CS6 http://forums.adobe.com/thread/1016269

HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be) downloading my work.

What are the best optimization settings for Logic 9....

Hey guys,
I am running Logic 9 on a Macbook Pro 2.53GHz, Intel Core 2 Duo, 4GB RAM, OSX 10.6.4, with a AK1 soundcard. And I was wondering what the best optimization settings for this setup are?
I have been having a few issues with drop outs in sound during playback, which is also carried over when i bounce the audio. I did some research and found my latency settings needed to be higher, so I set the I/O buffer size to 512. I am also running all samples from the local hdd, I was thinking maybe put the samples on an external drive. I also changed Logic 9 to 64bit mode.
Does anyone know if this is right and anything else I need to do with Logic and/or the AK1??

First, return to 32-bit mode. 64 bit still has some ß-issues and some features that are not working/disabled, and the only perk of 64-bit is that Logic can adress more than 4 GB RAM, which you don't have anyway.
Samples on the startup drive is not a problem, unless you start using really big third party sample libraries, or zillions of EXS instruments. Some of the Logic content insists on residing on the startup disk anyway, better leave that where it is.
If you have an external, use that to store your Logic projects, or, in other words, make it your recording disk (as recordings are stored in the project folder). You do record audio too, I assume? Anyway, if you get an external, make it a FireWire one, not USB. FireWire is much easier on the CPU, and +for audio (and sample-) streaming+ more reliable and faster than USB.
If dropouts you hear during playback also show up in the (offline?) bounce, it is probably not a buffer issue, as the buffer is irrelevant for bouncing offline.
So how many tracks and what kind of tracks in this project? Which plugins and how many instances of them?

Best audio settings for mp3?

Hi everyone,
I was wondering what are the best audio settings for an mp3 to import into C4?
Thanks,
Tina

Yes Tina,
I had this issue before. here is what i found:
Record at Sample rate 44100 Hz, 16 bit, high quality publish as MP3
Captivate settings at near CD bitrate 96 kbps,
encoding speed 0,
44.100 KHz encoding frequency

Best printer settings for the Officejet 8625 for glossy label printing

best printer settings for the Officejet 8625 for glossy label printing. The black does not appear dark black ......just shades of gray

pendavinci
Welcome to the HP Community Forum.
The following might be helpful to resolve the issue:
Printing Labels_Business-Cards_Cards
See the section on Printing and Printing Preferences
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Xcode 3.2.6 best build settings for Mac

Hi!
I'm using Xcode 3.2.6 on Mountain Lion 10.8.5 to create Applescript based applications.
They are tiny utilities that needs more complex UI Applescript can provide.
I''m wondering what's the best build settings for applications aimed to run on Mac OS X
- since 10.6
- non universal binary (no PPC code)
- 64 and 32 bit
Thanks for your help.

Mark,
Now I'm confident about my buids.
red_menace,
Ok. That's what I was affraid about. So if I want to go further, I have to learn AppleScriptObjC.
But the learning curve…
I'm not a developper. Just a graphic designer.
Don't have the time to check out this link, but maybe the solution for a smooth transiton to AppleScriptObjC is there:
http://www.macosxautomation.com/applescript/apps/runner_vanilla.html
Thanks both of you.

Best Video Settings For The iPad.

Hi everyone,
Does anyone know this ? "Best Video Settings For The iPad".
Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video. it's rather frustrating to have many technical jargons online without anyone giving real pointers at real values in conversion settings.
Thanks in anticipation.

Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video.
It is impossible to answer your question without knowing both the aspect ratio of the source file and your personal preferences for displaying it on a 4:3 iPad screen.
Basically, you have two options here when converting files of one aspect ratio for display on a screen of another aspect. You can distort the original display to "fill" the ipad screen. (E.g., you can make a widescreen movie exactly fill your iPad screen but then people and objects will look tall and skinny.) The other option is to convert at the original aspect ratio and simply use the iPad "zoom" option to force your widescreen movie to fill your 4:3 screen by scaling the height of your movie to fill the screen and allowing the left and right edges of you movie to be cropped from your view. You have no other choices here other than living with the defaulted black areas.

Best export settings for dvd

Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

>require this much memory
Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Best format/settings for photos to a slideshow

Similar Messages

Maybe you are looking for