Best FW800 card for G4 Mirror Door?

I've got a Dual 1.25, 1.5G Ram mirror door G4, and I've got a Cinwave card installed on it as well (don't know if that matters or not.) Anybody got any advice on which fw800 is going to be best for me? I'm planning on buying a G-Tech G-Raid for additional storage for this system and capturing in 8-bit Cine YUV codec.
Thanks for your help

We've had great success using FW800 products form Granite Digital. Both PCI cards as well as FW bridges to make my own drive enclosures.
http://www.granitedigital.com

Similar Messages

Best video card for my mac

Hey,
I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
~R

Hi
The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
http://www.barefeats.com/rad98pro.html
Regards,
Dave

HT4664 What is the best graphics card for FCPX?

In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
"Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
Apple lists this card on its support page: http://support.apple.com/kb/HT4664
So,
What is the best graphics card for FCPX?

Ben,
Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

Which is the best WLAN card for my lenovo x200 notebook?

Hello!
I hope somebody could help for me. I bought a new Lenovo X200 notebook but it hasn't got WLAN card. So I have to buy a mini PCI-E WLAN card. In my notebook there is a webcam so I find only 2 wlan cable (1 black and 1 grey). The question is: witch is the best WLAN card for me?
Intel 5100
Intel 5300
or
ThinkPad 11a/b/g Wireless LAN Mini-PCI Express Adapter
Please help me.
I can use intel 5300 (it has 3 connection port) if I have only 2 cable?

On the Lenovo X200 support page you will find the X200 Hardware Maintenance Manual which lists all the parts in the X200.
You will find there that the 43Y6493 is Lenovo's Intel 5100.
I don't work for Lenovo. I'm a crazy volunteer!

Best Video Card for non 3d/compositing work in Premiere CS4?

Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

Best video card for Archlinux?

What is the best video card for Archlinux distribution?
Is it possible to make Radeon HD 4870 work somehow in Archlinux, the same way like it works in Ubuntu?

Just see what drivers are you using with your ubuntu install? Catalyst/xf86-video-ati/radeonhd and install the same on arch.

Best video card for G4 tower?

What's the best video card for my G4 tower without breaking the bank?
I have the dual 500nhz, 2GB ram, OSX 10.4.
I currently have a nVidia Gforce64mb with a small fan.

No you're OK...
There is DVI-I, DVD-D, & DVI-A, DVI-I contains both DVI-A & DVI-D, HDMI uses DVD-D, (Digital), so it can connect to DVI-I or DVD-D.
Those 4 holes are only used for DVI-A, (analog).

Best Graphics Card for InDesign

I have seen a number of articles discussing the best graphics cards for a number of Adobe products such as Photshop, AfterEffects, SpeedGrade and Premiere Pro, but we have users that do not use these products extensively, but do use InDesign, Acrobat and Illustrator quite heavily, during prep for a paper catalogue.
Can anybody give me some advise on the best graphocs card for these particulat products please...? we are using CC.
Thank you.

Only really need a graphics card for video editing - 3D modelling etc.
Even then the video softaware doesn't address the graphics card all that much.
It's only recently that video software and 3d software request access to the graphics RAM.
Mostly the processors these days have pretty good onboard graphics cards. That should be plenty for photoshop, Illustrator and InDesign.
It's more physical RAM that is required, not graphics cards.
I have 20gb RAM and i7 4770 processor with no additional graphics card.
It works great.
Although a standalone graphics card would be better for video editing and 3d modelling.

Best Graphics Card for Photo Editing

Hello All,
I am a professional photographer. I currently use Photoshop CS5 and Lightroom 4.1. I am in the process of having a new computer built just for editing my photography. The board will be an ASUS P9X79 with an intel Core i7-3820 and 16 GB memory. The technician building the computer would like a recommendation of the fastest and or best graphics card for editing still images.
All of my work is done in RAW from a 5D MII. 21 megapixel.
Processing speed has always been a bottleneck for me and Lightroom 4 has not helped.
Can anyone please recommend the best or fastest graphics card for this system?
Thank you, Jim

I would focus on your PS CS5 requirments. If you intend on using a wide gamut display at some point I'd give serious consideration to graphics card that will truly support 30 bit display data (10bit/color) in PS CS5/6.There are only a handful of graphics cards that actually support a 30 bit data path with PS CS5/6. Some links:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
http://www.amd.com/us/products/workstation/graphics/software/Pages/adobe-photoshop.aspx
http://www.nvidia.com/object/photoshop-cs6.html
http://forums.adobe.com/message/4487697
You may also want to read this concerning limitations of using a wide gamut display with non-color manged applications (i.e. browsers, MS Office, etc.):
http://www.gballard.net/photoshop/srgb_wide_gamut.html

What's the best graphic card for FCP X and a Mac Pro (early) 2008?

I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
Thx,
Phil

You can get a 5770 radeon ATI MAC card
Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards.
Buy it from Apple online store or B&H photo or Macconection
And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

FW800 Card for G5

Any recommendations for a reliable FW800 Card for the G5?
Thanks!

Sonnet - http://www.sonnettech.com
http://www.macsales.com/firewire/

Best Graphics Cards for Motion 4

Hi All, what's the best graphics card for Motion 4. The The Nvidia GTX 285 or Radeon 4870
My Mac is a 2009, Dual 2.26, 12GIG Ram, External Raid 5 and running 10.6.2
All Motion files and media are stored on the raid running eSata
Thanks.
Message was edited by: addy77
Message was edited by: addy77

We've been waiting for a Macintosh version of the 5870 for more than a year. Get the 4870, learn the application, buy a new card if you can make money with it.
Waiting for the next iteration of Mac-compatible graphics cards is a waste of time if you need to get to work.
bogiesan

What is the Best Graphics Card for G4 Gigabit Ethernet?

Hi, i use my trusty g4 dual 450 at the moment and i cant help but feel sorry for it.
I think it could do with a bit more ZING
I was looking though some of the graphics card upgrades avalable and i want to make sure i get the best
that i can get for it. I thought the ATI Radeon 9800 pro with 128mb vram was the best i could do but lately
i found better ones that would supposedly work with it.
Can anybody help out a die-hard G4 fan and say whats the best my mac can handle?
Oh yea, I want to see if i can manage to play minecraft well/desently on my mac
and i have my eyes on some 1.6 ghz and 1.8 ghz processors on ebay to help do this, think its a good idea?

I was hoping japamac would reply first, but...
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
You need an AGP 2 x card.

What is the best video card for 3D?

I'm getting a 2008 Mac Pro, will equip it with 10GB of RAM. What is the best video card for 3D rendering? I've read that the stock ATI 2600 card is woefully inadequate. I've also read that the NVIDIA 8800 card is better for gaming, and has caused some problems anyway. I can't spring for the top-end Quadra card that Apple offers. Are there good, cost-effective options for 3D work? Can I even get a video card on the open market that is not flashed by Apple?

Basically there are only three options available:
1. ATI 2600
2. ATI 1900
3. NVidia 8800
The latter is the best of the three. See benchmark results at Bare Feats.
You cannot use a video card not provided by Apple because they will not work with OS X or the hardware.

TS1935 I have the video card model . What is the best video card for a 1.6GHz PowerPC G5 please?

Hello
What is the best (most modern and reliable) video card (AGP) which will work in a 1.6GHz PowerPC G5 (mid 2003)?
I believe I have ATY,RV350, and according to the attached article, it may be causing video start up problems.
Thank you
Adam

Hi Adam,
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
Rated slowest on top, fastest on bottom.
Though with no power loght & such, I'm not sure that is the problem or not... does the Hard drive(s) spin up?

Best FW800 card for G4 Mirror Door?

Similar Messages

Maybe you are looking for