Best hard drive performance on mac pro for final cut express

This week I'll be setting up a basic 4 core mac pro with 16 gb ram and 2 internal- 2tb WD Caviar Black drives. I'm wondering what would give me the best performance for running final cut express, and I'm considering setting up software raid 0 or using one drive for boot and one for scratch. Or should I set up software raid 0 with boot and scratch partitions? Or other suggestions? Thanks.

My recommendations -
With 2 drives in your Mac Pro, use *one disk for OS X and all of your apps;* the *second disk for data* (including your FCE scratch disk location). Partition each drive as a *single partition,* which will maximize performance over time.
In addition, you should invest in at least 1 external drive to use for backup purposes; if you don't, the day will come when you wish you had.
I strongly recommend AGAINST doing software RAID. Certainly not for your situation with only 2 drives, one of which will be your system HD; but also because hardware RAID is faster, more reliable, and does not require CPU resources to run.
Your internal SATA drives will provide plenty of performance for most video editing needs. You also have the ability to put 4 drives in your Mac Pro, in which case you can utilize the extra drives to provide additional performance if/when you get into serious multi-multi track video compositing.

Similar Messages

  • Interfacing Video Camera to Mac Pro for Final Cut Express HD Use

    I have a lot of Video8 tapes that were made on my Sony DCR-TRV310 that I want to move to my Mac Pro and edit with Final Cut Express HD. The Sony camera only has the three (R,Y,W) output ports and my Mac Pro only has firewire input ports. Does anyone know of a cord solution or do I have to use an additional interface. Thanks

    Hello,
    Unfortunately there is no "cable solution" You will need an external interface. Something along the lines of an external tv tuner. Elgato Systems makes a few, i've had great success with the Hauppage WinTV PVR USB2 Tuner. This cost me about 150$ Canadian and is compatible with Mac's after a software download from the manufacturer's website.

  • How I Install Final Cut Pro 6 on my Mac Pro with Final Cut Express 3?

    Any recomendations with the data, previous edits etc?

    I think he's asking about problems one might expect when installing both Final Cut Pro and Final Cut Express on the same computer. I assume he's also asking if he'll be able to move files from FCE to FCP without problem. And maybe move them back?
    That's my guess.
    Ross Hunter
    Orange, VA

  • Mac Pro for Final Cut Studio -- The Buying Guide

    I am starting to think about upgrading my "old" Power Mac G5 Quad system to a Mac Pro system. As you might expect, this raises several issues.
    What I do: I edit DV and HDV on FCS2. My specs are below. I am looking for the best speed (especially for rendering), stability and video quality I can afford (between $5,000 and $6,000).
    Question 1: Is it true that Snow Leopard and FCP 7 are about a year away? If so, please assume for the following questions that I would be working with the full complement of FCS2 applications on the Leopard OS. (How worth waiting for do you think these are?)
    Question 2: Without directing me to the various benchmark and testing sites (which I’ve already looked at), can you suggest the actual performance differences I would see (again, using the whole range of FCS2 apps) in the following:
    Two 2.26GHz Quad-Core Intel Xeon processors
    Two 2.66GHz Quad-Core Intel Xeon processors
    Question 3: I have heard that (with the exception of Compressor) FCS can only use a maximum of 4GB of RAM, and that the 6GB that the Mac Pro ships with are already more than it can use. Is this true? Is it true that Snow Leopard would allow FCS to make greater use of more RAM? And would this show up in the programs’ performance?
    Question 4: To get the best video performance with my various FCS2 applications, is there a significant quality improvement in moving up from the NVIDIA GeForce GT 120 512MB to one of the other video cards? How would I notice a difference in the quality?
    Question 5: Are there any other purchasing considerations I should think about when configuring a new Mac Pro?
    Thanks a lot.
    Giraut

    Well, well, well, you make me think more about my last upgrade of an ATI Radeon 2600 to the latest ATI Radeon HD 4870!
    I was looking on the Final Cut Pro thread to find one answer and look what I found, your questions!
    Since yesterday night I was seeking the Apple Support threads just for fun and I now have doubts.
    I am a Mac Pro (earlier 2008) owner. I upgraded it to 4 x 1.5 Tb Seagate hard drives and 10G of RAM from OWC (Other Word Computing). First let me tell you NOT to buy from Apple Store for your hard drive and/or memory upgrade. They are totally out of price list. I got my Mac Pro first with one 500 Gb Seagate drive. Then I added 2 x 500 Gb hard drives from Apple. I payed them 199,00 $ each
    Last September, I upgraded the drive bays with 4 x 1.5 Tb from OWC. I paid them 229.00 $ each!
    199,00 $ for 500 Gb or 229,00 $ for 1.5 Tb (that"s 3 times 500 Gb) which one would you take? And we are talking about two models from Seagate running at 7200 RPM, with 32 Mb of buffer.
    I mean... What is that?!!?
    And the memory! Don't even think about it.
    I got first 4GB Matched Set (2 x 2GB) for 147,99 $ in September from OWC and my second order was 4GB Matched Set (2 x 2GB) for 132,79 $ in October.
    I payed a total of 280,78 $ for 8GB of RAM while the price for this upgrade on Apple Store woul have cost me 1998,00 $
    *+Source Apple Store :+*
    *+Apple Memory Module 4GB 800MHz DDR2 FB-DIMM ECC 2x2GB $999.00+*
    Multiply that by 2!
    Now how much memory would you need?
    I am not a Final Cut Pro user, but I use Final Cut Express a lot, with animation QuickTime movies exported from my Astronomy software Starry Night Pro Plus.
    Yesterday I posted this into a thread to answer a user :
    +Every morning I have my preferred applications started: Mail, Safari, iTune, Aperture and Final Cut Express. I just did a test for you. I started Mail, Safari, Aperture, Final Cut Express, Starry Night Pro Plus (OpenGL Astronomy Software), Terminal, Quicktime, TextEdit and NeoOffice.+
    +With all these apps running, I still have 6.48G of Free RAM out from the 10G installed!+
    +It's when I start hungry applications like VMWare Fusion running Windows XP, or Quicktime with a lot of movies opened that I could see the memory level going low!+
    +Your bottle neck in video editing will probably be the video card, after the disk speed. Be sure to use 7200 RPM disk and eSATA for your video plans if possible. Firewire 800 will works fine on external drive but it could giggle. I had an ATI Radeon HD 2600 that I recently upgraded to an ATI Radeon HD 4870. the drivers aren't ready yet from Apple. We are all waiting for the next OS X release 10.5.7 for the drivers! For now, I am running on Beta drivers.+
    +It's hard to say by now if I have better performance into Final Cut Express because the movie I was working on was an animation movie using plans exported from Starry Night Pro Plus via Quicktime and "animation" codec without any compression. As soon as I make a modification, I still have to render the output for smooth playing.+
    Now, after some test with Starry Night Pro Plus this morning, I can safety say that Starry Night Pro Plus with Open GL does use my video card extra speed and that my experience navigating into the Universe is much better and smooth.
    But honestly, even if I have to admit that I am using the Beta drivers for the HD 4870, I must say that I have very big doubt that Final Cut Express does use the extra power of the HD 4870 compare to the HD 2600!
    In fact, I am searching the support thread for this answer.
    Does anyone can say if Final Cut Express or Final Cut Pro does make use of the extra hardware feature of the ATI Radeon HD 4870 or not?

  • New Mac Pro and Final Cut Express HD

    Ive just taken delivery of a new Mac Pro 2.8ghz quad core with ATI Radeon HD 2600. I've tried to open Final Cut Express HD and am getting an error message
    ' This software requires certain hardware or software which is missing -
    AGP graphics card"
    I've tried re-installing but no luck, any ideas ?
    Thanks

    Hi(Bonjour)!
    You can use keyframe on filters from version 3.5 and later. And the new FCE HD 4.0 (who doesn't includes soundtrack nor the complete content of livetype library) includes newer filters and supports AVCHD.
    Michel Boissonneault
    Message was edited by: Michel Boissonneault

  • How can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

    how can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

    Mac OS X 10.9.2 is 12 years newer than 9.2.x.    You need to make sure that Spotlight has indexed the external hard drive by adding it and removing it from Apple menu -> System Preferences -> Spotlight -> Privacy.   Check the menu for it:
    to determine if indexing is still going on, as it will say indexing.
    Alternatively, you can use a non-Spotlight tool, such as:
    http://apps.tempel.org/FindAnyFile/
    http://www.devontechnologies.com/products/freeware/ - EasyFind
    http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement for MacKeeper, do not download).
    http://www.barebones.com/ Textwrangler has a Search file for content, which works on any Text file.

  • New hard drive in a Mac Pro - my experience.

    After taking delivery of my MacPro I was keen to add an extra hard drive to use in conjunction with amateur level video editing and photo imaging software.
    At first I bought a 3.0 Gb/s, 320 GB Seagate 7200.10. and it worked Ok but did not seem any faster than the OEM drive (250 GB Western Digital SE) . XBench confirmed that it was in fact 20% slower overall.
    I then consulted this forum and read the many posts re the Seagate firmware problem and other suggestions for suitable hard drives. To be honest it was all great stuff but, for me, a little overwhelming. So today, back went the Seagate in exchange for a 3.0 Gb/s, 250 GB, Maxtor Diamond Max 10 which was all I could afford. I installed the drive, what a dream the MacPro is, partioned it and ran XBench. The Maxtor is 2.5 to 3 times faster than the Seagate and is a quiet drive.
    So if you, like me, want a single, affordable fast and quiet drive, the Maxtor does the job. I am sure other drives are just as good if not better but if you find the research confusing, the Maxtor seems to be a safe choice.
    Also, congratulations for reading this forum before making a purchase - it saves you the 20% restocking fee for returns!

    I want to install another hard drive in my Mac Pro. Just looking for something in the 250GB or smaller range - Western Dig. Maxtor, etc.
    I see plenty of SATA 3Gbs drives - what do I look for in terms of specs. The dimensions are listed in the Mac Pro booklet, however, what type of connector is needed or not needed - seems no cables are needed... how many pins, etc.????
    Appreciate any help.

  • I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

  • I have a Mac pro(1 free bay) and a mac mini I need to back both of them  Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

    I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine)  Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
    What option has the faster GB/s?

    Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
    But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
    You should always have off line backups and don't rely on just one backup set or just TimeMachine.
    WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
    http://www.amazon.com/gp/product/B008JJLW4M/
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.bombich.com/software/updates/ccc-3.5.html
    Clone to internal, TimeMachine to NAS is one way to go at it.

  • Want to add internal hard drive to my Mac Pro

    I want to add an internal hard drive to my Mac Pro bought in 2011
    Running Lion 10.7.5  Processor is 2.8 GHz Quad Core Intel Xeon
    Have a 1TB SATA
    Do I need a 2.5" or 3.5" ? Any other criteria i should know about when looking?
    Advice is appreciated.

    For a Mac Pro you'll probably want to go with a 3.5" drive. I would recommend Hitachi. I put a 2.5" new model Hitachi in my laptop along with an SSD and the Hitachi HD is unbelievably fast for a "spinner." If that's how there 2.5" models are there 3.5" models will only be better.
    Make sure none of the drives you use have a variable rotational speed. Some of the Western Digital Green drives have that and they go to sleep a lot. When they sleep they have to wake up and when they wake up it causes a delay. It won't happen if the drives in constant use but it can be annoying. I believe the Green drives are intended primarily for backup use where speed isn't critical but energy savings and longevity are.
    These are my opinions and observations.

  • How do I overcome error 150:30 with a replacement system hard drive on a Mac Pro?

    I have replaced my system hard disk drive on a Mac Pro and used Mac 'Restore' to restore the complete system from a Time Machine backup. Everything else works correctly, except my current Adobe products (InDesign CS4 and Photoshop CS4) both give a licensing error code 150:30 and each suggest contacting Adobe technical support.
    Can you help?
    Blair Cramond 

    Thanks for your reply. Is it necessary to uninstal the existing CS4
    products before re-installing?
    Ned Murphy <mailto:[email protected]>
    5 May 2014 13:14
    >
          How do I overcome error 150:30 with a replacement system hard
          drive on a Mac Pro?
    created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in
    /Downloading, Installing, Setting Up/ - View the full discussion
    <https://forums.adobe.com/message/6354088#6354088>

  • G5 Hard drives in a Mac pro?

    Can I use G5 Hard drives in a Mac pro?
    One user on this thread says yes
    https://discussions.apple.com/message/15274834#15274834
    but this KB article says, "The hard drives must meet the following specifications: Type: SATA 3 Gbps..."
    http://manuals.info.apple.com/en_US/MacPro_HardDrive_DIY.pdf
    I'm pretty sure the SATA drives in the G5 are not 3 Gbps
    Any problem with this?  (Other than the older drives being slower)
    Thanks
    DLS

    Backward compatible.
    You can use SATA III/6G drives also, though the bus controller is limited to SATA II.
    Those are all specifications, nothing more.
    And don't use jumpers. If you used jumpers before, because the G5 (most, though the G5 Quad had SATA II support), you might need to remove it. Some G5s only really supported SATA 1.0 and before SATA II or even SATA was really finalized (most drives were barely even legally SATA).
    Caught people off-guard, so un-Apple like to adopt something new so quickly.
    now people are hoping and waiting for more bandwidth and better support for SATA III, to take advantage of SSDs and 6G.

  • How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder

    How to reinstall a hard drive on a mac pro that was accidentally dragged out of Finder?  I have files on this drive that I don't want to loose or corrupt.

    If you mean you dragged the hard drive shortcut out of the sidebar of a Finder window, you're quite all right - that's just a shortcut and you haven't lost any files. You can get it back by going to Finder preferences (the Finder menu, then Preferences), click Sidebar, and tick the "hard drives" box fully to show all hard drives.
    Post back if you did something different though.
    Matt

  • Adding a solid state hard drive to a Mac Pro 3,1

    I have two hard drives in my Mac Pro 3,1.  I want to add a solid state hard drive and upgrade Yosemite to it.  I will eventually use my existing drive as extra storage.  Does anyone know if this model of Mac Pro can support SSD drive?  Also, can I mix and match normal hard drives with SSD drives?  I know I will also need an adapter since SSD's are 2.5 inch.  The one I am thinking about getting is the Kingston SSDNow V300 Series SV300S37A/240G 2.5" 240GB SATA III Internal Solid State Drive (SSD).  Any feedback that can confirm or deny compatibility would be appreciated. 
    Thanks,

    I have Mac Pro (4.1 2009 model) and I have Samsung SSD 840 EVO 500GB. There is an issue you you want to run Yosemite.  That drive requires that TRIM is enabled otherwise the perforamnce goes down. There is a Trim Enabler  that you can get but but default Yosemite rejects it and disables it so you end up with a driver with TRIM not eanbled. There is a hack that allows you to get it working again but it has some security implications.
    Just be aware of it.
    Tom

  • My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

    My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

    1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
    2)  Use one of the following methods to install FCE 3.5 into Mavericks:
    a)  Pacifist:  http://www.charlessoft.com/
    b)  Jeremy Johnstone's Terminal method:  http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
    Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function.  FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

Maybe you are looking for