Best import format

Hi
I have to pay for some footage that it is on digi beta tape to be supplied to me for use in FCPro. What is the best format for them to convert it to?
Thanks

Whatever format you shot, you should have the transfer house match to, but that also depends on your final delivery format.
If it's standard definition:
Digitibeta - 10 bit uncompressed.
Shot MiniDV, have the post house transfer to DV-DCPRO NTSC.
Shot HDV, then have them transfer to HDV or ProRes format.
If it's HD:
Shot HDCam, have the post house transfer to 8-bit uncompressed OR of your system can't handle uncompressed, you can use DVCPro HD.
Shot DVCPRo HD - Transfer Files as DVCPro HD
Shot HDV - Transfer files to ProRes or HDV
You shot lots of footage and have not much space, well you can use Offline RT, DV-NTSC, etc, etc, etc.
This is just my opinion, and how I've dealt with the different formats, I'm sure there's other people how can give you a different perspective.
EDIT:Shane's right, 8-bit uncompressed won't fit on a DVD, use a hard drive.
Message was edited by: Vancouver Editor
Message was edited by: Vancouver Editor

Similar Messages

Best Import format for quality and size to use on iPod and to burn

I want to import from CD's to primarly download to iPod but also to occassionly burn a CD. I would like to be able to set import format 1 time for best results for both. If this is not possible then what would be best format for iPod (smallest/best quality) and best format for burn's (size doesn't matter, ha!ha!) but quality does.

It all depends on your personal preferences and your ears (the quality of your hearing).
Recalling some recent topics in this forum, I remember one person, who insisted to rip all his tracks into a full (lossless) format and another person who was happy with converting all his tracks in 48 kbps.
As for myself, I rip all my CDs in Apple Lossless, which result in full audio quality files having about half the file sizes of AIFF and WAV (which both are uncompressed).
Then I apply the proper tags, artwork and (sometimes) lyrics and convert them to AAC 128 kbps files for 'daily' use on the iPod, iTunes and burning on Audio CD for the car CD-player. I then store the Apple Lossless files on an external disk for archival purposes.
In your case, if size doesn't matter, I would rip them in AIFF or Apple Lossless.
AIFF has the advantage to be a universal format, which can be read by every application that works with audio files.
File size comparison (average MB/minute):
AIFF and WAV: 10 MB
Apple Lossless: 5 MB
AAC 128 kbps: 1 MB
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Best import format (typographic artwork)

Hi there, I'm working on a website that involves some typographic artwork. Those texts are created in AI, exact or around 100% of the actual size used in the website, and converted to outlines. I'm using those as symbols in a library. No gradients or anything, just solid colours. So far I've tested 2 import options:
import as AI artwork@72 dpi in FW
and
import a png version of the AI artwork in FW @72 dpi
However, when I look at the results @ 100% in FW I'm a bit dissapointed. I don't use tiny sizes but somehow I have the idea things could look a bit more sharp. But coming from the print world this could be a normal response. I just want to make sure, what's the best practice when it comes to importing critical artwork into FW making it look as sharp as possible? And is there any point in upping the res for that matter? I work with CS 5.5.

That's an interesting question. Do you have samples to share?
To me, the biggest difference between AI and FW is that vector rendering in AI is so much smoother across all preview sizes, whereas FW delivers smooth resolution only at 100% zoom. I've never thought about it this way before, but I believe that a graphic at 100% zoom is directly mapped, pixel by pixel, to monitor output. For example, my monitor is approximately 112ppi, so that's the resolution at the which any FW graphic is actually rendered on my monitor. In other words, you're not viewing the graphic at 72ppi; you're viewing it at the native resolution of your monitor. The 72dpi setting is a bit misleading that way.
You could change dpi in FW's Modify > Canvas > Image Size command, but this would only have an impact on rendering if "Resample image" were checked. And in that case, you'd actually be increasing the pixel dimensions of the graphic. For example, if you changed the resolution to 144dpi with "Resample Image" checked, you'd actually be doubling (or squaring?) the relative size of the graphic. In fact, this would result in smoother-looking vectors, since there'd more pixels with which to render the vector shapes, but it would also increase the size of the graphic relative to your screen. So I guess what I'm saying is, you could try doubling the size of your graphic in the working stages, and then when it's time to export, you could play around with different resizing algorithms to get sharper or smoother results, according to taste.
But your real question was: What's the best practice when it comes to importing critical artwork into FW making it look as sharp as possible? And I don't know the answer to that. Importing as vectors seems like a good idea. Although, it could be worth considering that text and vectors are not rendered identically. With text, you have the option of choosing a different rendering intent (e.g. Smooth anti-alias, Strong anti-alias, Crisp anti-alias, etc.). Also, if vectors don't have a satisfactory appearance in Fireworks, it might actually make sense to flatten them in Illustrator first, and then import them as bitmaps; you might be able to "lock in" a better appearance that way.
Sorry if I'm just thinking out loud...

Line Drawing best file format for import in InDesign

i was wondering what is the accepted and recommended file format for files to be imported in InDesign. I was under the impression that AI files should be saved as EPS but I just read an article that says that Adobe's Dov Isaacs said that eps will be shortly obsolete.What should I do. I work on curriculum that contains both photographs and line drawing and we use tiff for the former and eps for the latter. Most of our line drawing is done in AI. Howeverwe have a cartoonist that sends us files in jpg format. What would be the best file format for him and for us as we draw in AI?
Article link: http://www.prepressure.com/library/file-formats/eps
The future of the EPS file format
EPS is rapidly becoming an outdated file format which is being replaced by PDF just like PostScript itself is also being phased out and replaced by PDF. Don’t just take my word on this. Here is what Dov Isaacs from Adobe said in a discussion on a PrintPlanet forum about the future of PostScript: “ …Adobe will continue to support EPS as a legacy graphics format for import of non-color managed, opaque graphical data into Adobe applications (such as InDesign and Illustrator). Although we certain do not recommend that new graphical content be stored in EPS format (except to satisfy the need to import data into page layout programs that aren’t quite PDF-centric — no need to mention names here!), our user base should feel comfortable that there is no need to worry about a need to convert their very sizable libraries of EPS-based graphic assets.”

Yes, I drag the AI file in.
If after it's in place I need to change I can just right click and chose edit original make the changes and save and the illustration in inDesign will reflect the changes.
On the other hand I can make changes to the original and all iterations of the file will automatically update, say if I used the illustration in several documents.
As an example I had completed a set of documents for a new company, i.e., biz cards, brochures, product labeling, stationery, etc. and in their wisdom they decided to make changes in their logo, which, of course, is on everything. I opened the AI file with the logo made the changes saved and all the documents then reflected the changes. The only caveat to do this seamlessly is to make sure that your file logo size is the same as the original or you might have to tweak placement in the other documents
It is this interoperability that to me makes the Creative Suite so much more than the sum of their parts.
Craig

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

This question is largely answered by the following thread...
https://discussions.apple.com/message/17805700#17805700

Best video format to export from final cut pro to encore

hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?

Sure, export it as an uncompressed AVI or QT file.

FDM Import Format Spec with multiple Amount Fields

Hello,
I'm in the process of setting up an Import specification for one of our sites and the source extract consists of the following fields:
Source Account Description BegBalDR BegBalCr YTDDR YTDCR
01-511-5110     Inventory Adjustment     1,754.00     0     0     14,844.76
I'm am trying to Import Field 5 & 6 and net them if necessary (example: YTDDR - YTDCR) and I continue to get an error. I have tried several diffrent ways but it seems that I can only import one or the other. After reading the FDM Admin guide I am wondering if I need to create a custom Script to accomplish this task.
Any advice would be appreciated.
Thank you,
Tony

This might be slightly complicated, but I think its the most direct solution ........
Step 1 -
In your Import Format, assign the Amount as :
FieldName, Start, Length, Expression
Amount, 1, 1, Script=NetAmounts5and6.uss
Step 2 -
Create an Import (DataPump) script called NetAmounts5and6 with the following code :
Function NetAmount5and6(strField, strRecord)
'Hyperion FDM DataPump Import Script:
'Created By:     cbeyer
'Date Created:     2/13/2009 5:57:14 PM
'Purpose:
'Get the last two fields
Dim tmpRecord
Dim strCurrentChar
Dim strYTDCR
Dim strYTDDR
Dim x
'Initialize fields
tmpRecord = strRecord
'Ensure we have data
If Trim(tmpRecord) = "" Then Exit Function
strYTDCR = ""
strYTDDR = ""
'Get YTD CR
'One could use the replace command to change all spaces to a delimittable field and then
'split out the string into a one dimensional array using the split command; however,
'This would only work best if there is an exact number of spaces between the two numbers
'Since I do not know if this is true, instead i'm looking for numeric/numeric like characters
'and splitting based off of that.
For x = Len(tmpRecord) To 1 Step -1
strCurrentChar = Mid(tmpRecord,x,1)
If (IsNumeric(strCurrentChar) Or strCurrentChar = "$" Or strCurrentChar = "." Or strCurrentChar = "," ) Then
strYTDCR = strCurrentChar & strYTDCR
Else
Exit For
End If
Next
'Trim down temporary record holder to remove the previous found amount and white space at the end of the string
tmpRecord = RTrim(Left(tmpRecord,x)) 'Remove the first number from the string and white space
'Get YTD DR
For x = Len(tmpRecord) To 1 Step -1
strCurrentChar = Mid(tmpRecord,x,1)
If (IsNumeric(strCurrentChar) Or strCurrentChar = "$" Or strCurrentChar = "." Or strCurrentChar = "," ) Then
strYTDDR = strCurrentChar & strYTDDR
Else
Exit For
End If
Next
'do the math
If IsNumeric(strYTDCR) And IsNumeric(strYTDDR) Then
NetAmount5and6 = strYTDDR - strYTDCR
Else
NetAmount5and6 = 0 'This will cause the record to fail on import
End If
End Function

Best File Format For Online Line Art?

I thought the conventional wisdom was that all line art for the screen should be saved as GIFs, all photographic line art should be saved as JPEGs.
Then PNGs came along and offered an alternative to GIFs.
I've been exploring this because I've been having a problem when exporting line art from Illustrator 8 as a PNG and opening it in Fireworks MX, where it appears washed out.
I did a bit of research among comic strip artists -- the art I'm exporting from Illustrator is a comic strip -- and came up with conflicting results.
Dilbert seems to save black and white line art as GIFs, e.g. http://dilbert.com/comics/dilbert/archive/images/dilbert2008611230313.gif
... But its Sunday colored strips seem to be saved as JPEGs, e.g. http://dilbert.com/comics/dilbert/archive/images/dilbert2008040261966.jpg
Meanwhile Donnesbury seems to save colored comic strips as GIFs, e.g. http://images.ucomics.com/comics/db/2008/db080406.gif
Any thoughts, suggestions?
Thanks.

I assume your line art is drawn as vector art in Illustrator, correct?
As far as I'm concened, the "best file format for online line art" would be .swf, because it would retain its scaleable vector nature, and the Flash Player is most likely embedded in any reasonably recent computer's browser.
But a little simple experimentation would be in order regarding file size. SWF (as exported from Flash, not necessarily AI) is very efficient. But the complexity of the line art could still make a given image require more bandwidth as .swf than as a rasterized version.
The former conventional-wisdom regarding PNG is the old "not supported in older browsers" saw. I see even Firworks's online help still says:
> However, not all web browsers can view PNG graphics.
Personally, I think its way past time to stop cow-towing to outdated browsers and use PNGs anyway. So if it were me, and the nature of my line art required rasterization for online use, I would use PNG for its obvious advantages. But then, my livlihood is not affected by some minority of outdated web viewers not being able to view my PNGs.
I would think that whatever color problems you are having in getting your AI files exported to PNG can be worked out with a little investigation/experimentation. (PNG supports color management profiles, so that alone may be your problem, and may be easily fixed in your workflow.) GIF is by definition limited to a subset of colors. JPEG is by definition a lossy compression format. So there are certainly precise color-accuracy issues with those overused formats, too.
But again, that's just me. What little I do in web graphics that would involve this issue doesn't really affect my livelihood. Lowest-common-denominator compatibility may be more important to you.
> Gilbert seems to...
> Doonsbury seems to...
The two images are very close to the same size (132K & 125K). They both include contone grads. Between JPEG and GIF, I would expect JPEG to more consistently yield acceptable results. Since GIF is limited to an 8-bit lookup table, I would expect aberations such as unwanted banding to be more likely in GIF if the artwork contains many colors and alot of highly-rendered shading.
Since you specify
line art, though, that would rule out contone fills, and you could use GIF with a very small color table.
On the other hand, you do not specify whether you want to use transparency in your line art images. If you do, PNG would be far superior, because it supports true alpha transparency. In a GIF, if you can only make one particular color transparent. So even with line art, if the line art is antialiased at all, you'll have the ugly halos so commonly seen in GIFs when displayed on a wrong-colored background.
The only functional "advantage" that I see in GIF over PNG is its multi-image capability, for quick & dirty frame-by-frame animation. My personal animation efforts focus entirely on Flash/SWF, and use scripted animation whenever possible to avoid frame-by-frame. But I recognize the simplicity convenience of animated GIFs for web banners and those (often-annoying) moving icons and such.
JET

Best video format for converting DVD to NAS for widely sharing

Summary: The article shows you with an easy workaround for
copying DVD to NAS for streaming by ripping DVD to NAS friendly video
format on Mac and Windows
I recently purchased a NAS to store all my music/photos etc on. I
can stream stuff to my iPhone/iPad using the NAS software. What I want
to do is rip all my DVDs (over 400) to my NAS, but I’m not sure which
format to do it in, to play nice with my Apple TV2, Xbox 360, iPhone,
iPad etc. I wanna get some advice as to what format to rip in and what
software to use?
Learn some tips from online, I got know that to copy dozens of DVD movies to NAS,
you need to get the content off the DVD disc as a protection-free and
easily readable element for NAS. In this case, at the first place
powerful third-party software for backup DVD to NAS is what you need.
There are many, many DVD ripping tools on the market. I’ve tired a pile of them.
Brorsoft DVD Ripper
is the best one I’ve tried yet. It is capable of ripping DVD to MP4,
AVI, MKV for NAS streaming with no quality loss; it also enables you to
copy DVD main movies for backup onto NAS in .vob format. And what I’ve
learned is that MP4 would be one best target format for it is fully
compatible with nearly all media devices including iPad, iPhone, PS3,
Apple TV, etc. If you are running on Mac OS X, turn to DVD Ripper for Mac. If you haven’t got the software, download it now and let’s start the conversion.
Ripping and copying DVDs to NAS
1. Launch the DVD ripping program for NAS devices . Then
click "Load DVD" to import the DVD files you want to convert. To select
the subtitles you like, simply click Subtitle and select the one you
prefer. P.S. Before start the conversion, you can choose to backup DVD mian movies.
2. Click Format bar and choose your desired format. To store
hundreds of DVD's on NAS, you can rip DVD to .mp4, or .avi, .mkv, etc
compressed format. And click Settings bar, you can adjust the level of
compression to suit the quality you want.
Tip: If you like, you can click “Settings” to change the
video encoder, resolution, frame rate, etc. as you wish. Keep in mind
the file size and video quality is based more on bitrate than resolution
which means bitrate higher results in big file size, and lower visible
quality loss, and vice versa.
3. Press the "Convert" button to start ripping DVD for NAS streaming.
After the conversion, click Open button to find the output files.
Make sure the wireless network connection is accessible among the NAS
and Apple TV, PS3, HD TV or other media players. Then just enjoy the
high quality DVD movies anywhere anytime.
[quote] movies-videos-convert-tips.overblog.com/2014/02/ripping-dvds-to-nas-how-to-copy-dvd-to-nas-for-streaming.html [/quote]

I've always found encoding with Handbrake and choosing the Apple TV2 preset is an excellent place to start and video encoded using that preset will work on my iPhone 4, 4S and iPad 2.
If the files encoded using that preset are too big for one's taste they can always encoded at a lower average bit rate rather than using the default 'Constant Quality' of 20.
Later on I'm sure the Handbrake group will have an AppleTV '3' preset supporting the 1080p format supported by the ATV3 and iPad '3' but using such a preset would not create a file usable on the iPad 2 or the iPhones.

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

25 Sony 8mm old Home videos importing as ntsc best import/export settings

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.
*((((You will need to convert the analog video to QuickTime using Apple DV-DVCPRO NTSC codec. The normal way to do this is with an analog-digital converter such as the Canopus ADVC-110 or ADVC-300 (not the ADVC-mini). However, if you have a miniDV camcorder that supports analog-digital passthrough then you could use the camcorder as the converter device.)))))*
I was lucky and found a sony camera that I hooked a four pin firewire to a 9 pin (800) to my mac.
*(((Keep in mind that DV video requires about 13GB per hour. If your 8mm tapes are all 120 mins (2 hours) long, you will need about 650GB to store all the captured video. Sounds like a 1TB drive to me. BTW - Firewire, not USB.)))*
I was thinking 2TB
*(((You need to capture the video in FCE. The proper easy setup is the DV NTSC DV Converter easy setup. Editing will then be done in a DV NTSC sequence.*
*How you export from FCE depends on what you want to do with the finished video. If you just want to burn DVDs, then export to QuickTime Movie. If you want to save the video at its 'full resolution' then also export as a QuickTime Movie. If you want to post to the web, or do certain other things with the finished video, you would export to QuickTime Conversion.))))*
I just want to store it on 2 hard drives one connected to a pogo plug so my family can see them and store the second at my brothers house as the back-up. What would be the best format for that?
Now you know my hardware so should I import the whole 2 hours or batches of like 1/2 hour segments.
Again thanks for your help this is saving me many trials and errors.

What format is the best audio format to use in iPod touch?

I want to know the difference between MP3, AAC and Apple Loose-less audio formats and I want to know as soon as possible. I knew that AAC and Apple Loose-less formats use more size than MP3. That's fine with me. I just want to listen my songs with the best possible quality. What is the best audio format?

Apple Lossless would give you quality identical to that of the original CD, but the files will be very large. A 3-minute song in Apple Lossless will be around 18 megabytes, versus about 6 megabytes for the same song compressed with AAC at 256 kbps. For an iPod, Apple Lossless is probably not an optimal format, since unless you have very high quality earphones or connect your iPod to a good stereo playback system, you won't really take advantage of the quality of Apple Lossless.
For most people, the optimal tradeoff of quality versus file size is AAC at 256kbps. But as Niel suggestion, import a couple of CDs using different codecs and bit rates and decide for yourself. Quality depends on your playback system and what your ears can hear, so only you can decide what will be optimal for your situation.
Regards.

What is the best conversion format to work with FCU ProX?

I got a lot of old material from a client on Mpeg-2 (he converted it from VHS tapes from his family). When I tried to import the media into the project. FCU Pro X did not recognize the file. Using Toast Titanium I converted it to MPEG-4 and was able to import it. The quality is not good though.
Is that the best compression format to use or shall I try something else?
What about importing a DVD into the project?
VOB aren't recognized as well

MPEG4 comes in a lot of different varieties. Generally speaking, it's not a format that FCPX is very happy with. You may or may not run into problems with it. (My recommendation to people who have such footage is is transcode ot to Pro Res.)
Pro Res is an excellent editing codec. I won't say that it's the perfect codec for all situations but it's the one i use for virtually everything that needs editing. I notice that Tom Wolsky just responded to a similar question and recommended DVCPRO 50. It's an excellent format and one that I've used in the past; the equivalent length files are about 2X Pro Res. Try a short test and see what you prefer.
Russ

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

What is the best digital format from VHS to iMove?

Hello - I am getting some VHS tapes converted to digital files to edit on iMovie 11. They will be edited on a Macbook Pro 13" and it would be convenient if they could also work in FCE later on. My plan was to ask the company doing the conversion to put the files/movies on a portable hard drive, rather than DVD. And then import them or edit on iMovie. But is mpeg 4 the best end format or something else?
Thanks.
Simon

$500 -- ouch!!
Along with the new deck, I bought another brand new Sony Handycam MiniDV camcorder, because our Canon broke this summer too as well which served us very well for 10 years. It started eating tape, but we feed it new tapes every time we record; probably why it lasted so long?!? This camcorder set me back around $200. Yes, they are hard to find, but I work in the digital photo/video business, so sometimes dealers may have new old stock where you can bargain down. I was extremely lucky to had bought a new old stock from a dealer that had it but couldn't sell it. Perfect.
You're right -- tape to tape transfers is not ideal as degradation in S/N will impede on image quality. But I'm assuming the OP is simply using consumer grade VHS camcorders, so the analog to DV transfer is ok if done once. Then DV tape through Firewire is an analog to digital transfer. Once the OP has the digital copy inside the computer, it will never degrade if you make multiple copies on the hard drive.
Another solution the OP can look into is that some shops (getting rare these days) may have a Canon GL-2 on their rental pool and the OP can just use its built-in Analog to Digital (Firewire) pass through to transfer VHS analog footage directly into iMovie or FCE!
Wow, it's good to hear another person here still using DV!

Best import format

Similar Messages

Maybe you are looking for